Current code was relying on globalEndpoints as
the source of secondary truth to obtain
the missing endpoints list when the disk
is offline, this is problematic
- there is no way to know if the getDisks()
returned endpoints total is same as the
ones list of globalEndpoints and it
belongs to a particular set.
- there is no order guarantee as getDisks()
is ordered as per format.json, globalEndpoints
may not be, so potentially end up including
incorrect endpoints.
To fix this bring getEndpoints() just like getDisks()
to ensure that consistently ordered endpoints are
always available for us to ensure that returned values
are consistent with what each erasure set would observe.
Shuffling arguments that we pass to MinIO server are supported. However,
when that happens, Prometheus returns wrong information about disks usage
and online/offline status.
The commit fixes the issue by avoiding relying on xl.endpoints since
it is not ordered.
this is a major overhaul by migrating off all
bucket metadata related configs into a single
object '.metadata.bin' this allows us for faster
bootups across 1000's of buckets and as well
as keeps the code simple enough for future
work and additions.
Additionally also fixes#9396, #9394
enable linter using golangci-lint across
codebase to run a bunch of linters together,
we shall enable new linters as we fix more
things the codebase.
This PR fixes the first stage of this
cleanup.
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
canonicalize the ENVs such that we can bring these ENVs
as part of the config values, as a subsequent change.
- fix location of per bucket usage to `.minio.sys/buckets/<bucket_name>/usage-cache.bin`
- fix location of the overall usage in `json` at `.minio.sys/buckets/.usage.json`
(avoid conflicts with a bucket named `usage.json` )
- fix location of the overall usage in `msgp` at `.minio.sys/buckets/.usage.bin`
(avoid conflicts with a bucket named `usage.bin`
Recent modification in the code led to incorrect calculation
of offline disks.
This commit saves the endpoint list in a xlObjects then we know
the name of each disk.
Change distributed locking to allow taking bulk locks
across objects, reduces usually 1000 calls to 1.
Also allows for situations where multiple clients sends
delete requests to objects with following names
```
{1,2,3,4,5}
```
```
{5,4,3,2,1}
```
will block and ensure that we do not fail the request
on each other.
Metrics used to have its own code to calculate offline disks.
StorageInfo() was avoided because it is an expensive operation
by sending calls to all nodes.
To make metrics & server info share the same code, a new
argument `local` is added to StorageInfo() so it will only
query local disks when needed.
Metrics now calls StorageInfo() as server info handler does
but with the local flag set to false.
Co-authored-by: Praveen raj Mani <praveen@minio.io>
Co-authored-by: Harshavardhana <harsha@minio.io>
XL crawling wrongly returns a zero buckets count when
there are no objects uploaded in the server yet. The reason is
data of the crawler of posix returns invalid result when all
disks has zero objects.
A simple fix is to always pick the crawling result of the first
disk but choose over the result of the disk which has the most
objects in it.
On every restart of the server, usage was being
calculated which is not useful instead wait for
sufficient time to start the crawling routine.
This PR also avoids lots of double allocations
through strings, optimizes usage of string builders
and also avoids crawling through symbolic links.
Fixes#8844
Use reference format to initialize lockers
during startup, also handle `nil` for NetLocker
in dsync and remove *errorLocker* implementation
Add further tuning parameters such as
- DialTimeout is now 15 seconds from 30 seconds
- KeepAliveTimeout is not 20 seconds, 5 seconds
more than default 15 seconds
- ResponseHeaderTimeout to 10 seconds
- ExpectContinueTimeout is reduced to 3 seconds
- DualStack is enabled by default remove setting
it to `true`
- Reduce IdleConnTimeout to 30 seconds from
1 minute to avoid idleConn build up
Fixes#8773
Admin data usage info API returns the following
(Only FS & XL, for now)
- Number of buckets
- Number of objects
- The total size of objects
- Objects histogram
- Bucket sizes
This PR adds support below metrics
- Cache Hit Count
- Cache Miss Count
- Data served from Cache (in Bytes)
- Bytes received from AWS S3
- Bytes sent to AWS S3
- Number of requests sent to AWS S3
Fixes#8549
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
The underlying errors are important, for IAM
requirements and should wait appropriately at
the caller level, this allows for distributed
setups to run properly and not fail prematurely
during startup.
Also additionally fix the onlineDisk counting
- [x] Support bucket and regular object operations
- [x] Supports Select API on HDFS
- [x] Implement multipart API support
- [x] Completion of ListObjects support
No locks are ever left in memory, we also
have a periodic interval of clearing stale locks
anyways. The lock instrumentation was not complete
and was seldom used.
Deprecate this for now and bring it back later if
it is really needed. This also in-turn seems to improve
performance slightly.
Continuing from PR 157ed65c35
Our posix.go implementation did not handle I/O errors
properly on the disks, this led to situations where
top-level callers such as ListObjects might return early
without even verifying all the available disks.
This commit tries to address this in Kubernetes, drbd/nbd based
persistent volumes which can disconnect under load and
result in the situations with disks return I/O errors.
This commit also simplifies listing operation, listing
never returns any error. We can avoid this since we pretty
much ignore most of the errors anyways. When objects are
accessed directly we return proper errors.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
Klaus Post