The migration follow-up for #265 (PR #276) made lifecycle-created
deletes replication-aware: the scanner, the expiry of a transitioned
version and the bulk noncurrent purge evaluated the delete replication
decision and queued a delete marker or a version purge for the targets.
That is the content of the still-open PR #240. It changes behavior for
every bucket whose replication rule replicates deletes or delete
markers, the mc default: a target with longer retention loses versions
on the source's schedule, and a purge keeps its space as a pending
tombstone until the target confirms. SILO, like S3, does not replicate
lifecycle deletes; an opt-in can come later. The release did not
replicate them.
Remove exactly the replication parts: the decision callbacks and the
post-delete scheduling in applyExpiryOnNonTransitionedObjects and
expireTransitionedObject, the scheduling in deleteObjectVersions, and
ilmPurgeToDelete; the scanner builds noncurrent entries as before. The
rest of #276 stays: the hot-tier delete before the remote one, the
free-version retry record, the lifecycle-change fence and the migration
completion checks. API deletes still replicate, and the replication heal
still handles persisted pending markers and purges. As in the release,
the replication heal also resyncs an empty-state marker when
existing-object replication applies to it.
The delete-all variant of the scheduling, which queued a task with an
empty decision, goes with it.
Tests: the scanner's noncurrent purge, run with replication configured,
deletes the version at once and queues nothing; an ILM marker carries
no replication state and the heal leaves it unless existing-object
replication applies, in which case it is resynced as before; an API
version delete still queues a purge. The cross-pool batch, dispatch and
decommission tests now assert no replication, and a decommission whose
expiry used to wait for the target completes in one run. Adding back the
scanner's decision makes the first two fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Feng Ruohang <rh@vonng.com>
An expiry of all versions (ExpiredObjectAllVersions, DelMarkerExpiration,
and batch expiration with the default purge) asked the pools layer for a
prefix delete. The pools layer rebuilt the options, so the request ran as
a recursive delete of the key's directory in every erasure set of every
pool. Object a/b is stored inside the directory of a, so every key under
a/ was removed with it, however new, with one audit entry and one
notification for a alone. The rebuilt options also skipped the lifecycle
recheck, so on a single pool a version written after the decision was
deleted too, and tiered versions lost their metadata without free
versions.
The expiry worker, the migration expiry and batch expiration now ask for
a purge with the in-memory ObjectOptions.DeleteAllVersions:
- DeleteObject hands it to the purge under the object lock, before the
all-pools check. ILM decides with the unchanged lifecycleEventsAllPools,
on a single pool too; batch needs the version its walk matched to still
be the latest. A second read of each pool's authoritative history
records every copy, older writes of the same ID included, and must
equal the approval. Anything else deletes nothing.
- Before deleting, the purge reads every drive of each set that holds a
copy. It refuses the key when a drive cannot be read, when any revision
of an approved version there is transitioned, or, with Object Lock,
when retention or a legal hold protects one. It then deletes on exactly
the drive handles it checked.
- Versions are deleted by ID with the drives' version delete, which only
removes the object directory once it is empty: oldest first, for each
version older writes before the copy reads choose, and the latest last,
only once every older version is gone from every pool. No marker,
replication state or free version is written. The purge stops at the
first error, repeats a quorum-successful delete on the drives that
missed it while the lock is held, and stops before the latest version
at a budget of 1000 versions or one minute, reads included.
- The ILM audit entry records how many versions were removed. A purge
that failed after it began to delete is audited as partial and sends
no removal event. Batch counts come from the purge; a key whose latest
version changed is not expired, and a failed delete marker fails the
job.
The option is rejected with conflicting options and by every layer below
the pools. Force delete and internal prefix deletes keep DeletePrefix.
Delete-all of a transitioned latest version keeps its current path, and
a key with tiered older versions is refused. On a single pool the purge
relies on the lock-domain fix for writer exclusion.
Reviewed adversarially in two design rounds and four patch rounds; the
last approved with nits, which are applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Feng Ruohang <rh@vonng.com>
Merge lock and tag revisions for duplicate versions before all-pool
lifecycle evaluation using the existing metadata reconciliation rules.
Distinguish ordinary lifecycle refusal from object absence and clear
rejected batch replication state so a late policy withdrawal cannot
schedule a purge. Preserve restored-copy cleanup and real absence.
Cover single and batch protections, legitimate metadata removals, and
actual replication queue and HTTP target behavior.
Signed-off-by: Feng Ruohang <rh@vonng.com>
Reverse the first-parent diff of a3df317ae0,
including the feature branch compatibility and mover follow-up fixes.
Retain the independent multi-pool correctness fixes from #178 and migrate
their shared test fixture away from access-tier code.
Tolerate retired ILM keys and XML, read old v9 statistics while writing v8,
and document migration without moving objects or rewriting their metadata.
Include regression coverage using a historical scanner/writer v9 fixture.
Signed-off-by: Feng Ruohang <rh@vonng.com>
Adopt silo-pkg v3.13.2, the 20260903 mcli release, and the latest validated SILO Console commit. Move maintained source imports to the pgsty/silo-pkg module path, refresh the resulting dependency closure and credits, and keep only documented legacy minio/pkg transitive residue.
Signed-off-by: Feng Ruohang <rh@vonng.com>
Keep NVMe/HDD pool pairs useful without remote tiering: promote objects that
are read often, demote previously moved objects once they go idle, and leave
the feature off until operators set a two-pool topology.
Signed-off-by: mr javad seydi <seydi.birjand@gmail.com>
`go run golang.org/x/tools/gopls/internal/analysis/modernize/cmd/modernize@latest -fix -test ./...` executed.
`go generate ./...` ran afterwards to keep generated.
- Move VersionPurgeStatus into replication package
- ilm: Evaluate policy w/ obj retention/replication
- lifecycle: Use Evaluator to enforce ILM in scanner
- Unit tests covering ILM, replication and retention
- Simplify NewEvaluator constructor
move away from map[string]interface{} to map[string]string
to simplify the audit, and also provide concise information.
avoids large allocations under load(), reduces the amount
of audit information generated, as the current implementation
was a bit free-form. instead all datastructures must be
flattened.
skip healing properly in scanner when drive is hotplugged
due to how the state is passed around the SkipHealing
might not be the true state() of the system always, causing
a situation where we might healing from the scanner on the
same drive which is being. Due to this competing heals get
triggered that slow each other down.
Directory objects are used by applications that simulate the folder
structure of an on-disk filesystem. These are zero-byte objects with names
ending with '/'. They are only used to check whether a 'folder' exists in
the namespace.
This change uses the updated ldap library in minio/pkg (bumped
up to v3). A new config parameter is added for LDAP configuration to
specify extra user attributes to load from the LDAP server and to store
them as additional claims for the user.
A test is added in sts_handlers.go that shows how to access the LDAP
attributes as a claim.
This is in preparation for adding SSH pubkey authentication to MinIO's SFTP
integration.
ILM actions due to ExpiredObjectDeleteAllVersions and
DelMarkerExpiration are ignored when object locking is enabled on a
bucket.
Note: This applies to object versions which may not have retention
configured on them. This applies to all object versions in this bucket,
including those created before the retention config was applied.
i.e., this rule element doesn't apply to DEL markers.
This is a breaking change to how ExpiredObejctDeleteAllVersions
functions today. This is necessary to avoid the following highly probable
footgun scenario in the future.
Scenario:
The user uses tags-based filtering to select an object's time to live(TTL).
The application sometimes deletes objects, too, making its latest
version a DEL marker. The previous implementation skipped tag-based filters
if the newest version was DEL marker, voiding the tag-based TTL. The user is
surprised to find objects that have expired sooner than expected.
* Add DelMarkerExpiration action
This ILM action removes all versions of an object if its
the latest version is a DEL marker.
```xml
<DelMarkerObjectExpiration>
<Days> 10 </Days>
</DelMarkerObjectExpiration>
```
1. Applies only to objects whose,
• The latest version is a DEL marker.
• satisfies the number of days criteria
2. Deletes all versions of this object
3. Associated rule can't have tag-based filtering
Includes,
- New bucket event type for deletion due to DelMarkerExpiration
calling a remote target remove with a perfectly
well constructed ARN can lead to a crash for a bucket
with no replication configured.
This PR fixes, and adds a crash check for ImportMetadata
as well.
This PR makes a feasible approach to handle all the scenarios
that we must face to avoid returning "panic."
Instead, we must return "errServerNotInitialized" when a
bucketMetadataSys.Get() is called, allowing the caller to
retry their operation and wait.
Bonus fix the way data-usage-cache stores the object.
Instead of storing usage-cache.bin with the bucket as
`.minio.sys/buckets`, the `buckets` must be relative
to the bucket `.minio.sys` as part of the object name.
Otherwise, there is no way to decommission entries at
`.minio.sys/buckets` and their final erasure set positions.
A bucket must never have a `/` in it. Adds code to read()
from existing data-usage.bin upon upgrade.
Create new code paths for multiple subsystems in the code. This will
make maintaing this easier later.
Also introduce bugLogIf() for errors that should not happen in the first
place.
Object names of directory objects qualified for ExpiredObjectAllVersions
must be encoded appropriately before calling on deletePrefix on their
erasure set.
e.g., a directory object and regular objects with overlapping prefixes
could lead to the expiration of regular objects, which is not the
intention of ILM.
```
bucket/dir/ ---> directory object
bucket/dir/obj-1
```
When `bucket/dir/` qualifies for expiration, the current implementation would
remove regular objects under the prefix `bucket/dir/`, in this case,
`bucket/dir/obj-1`.
When objects have more versions than their ILM policy expects to retain
via NewerNoncurrentVersions, but they don't qualify for expiry due to
NoncurrentDays are configured in that rule.
In this case, applyNewerNoncurrentVersionsLimit method was enqueuing empty
tasks, which lead to a panic (panic: runtime error: index out of range [0] with
length 0) in newerNoncurrentTask.OpHash method, which assumes the task
to contain at least one version to expire.
- Use a shared worker pool for all ILM expiry tasks
- Free version cleanup executes in a separate goroutine
- Add a free version only if removing the remote object fails
- Add ILM expiry metrics to the node namespace
- Move tier journal tasks to expiryState
- Remove unused on-disk journal for tiered objects pending deletion
- Distribute expiry tasks across workers such that the expiry of versions of
the same object serialized
- Ability to resize worker pool without server restart
- Make scaling down of expiryState workers' concurrency safe; Thanks
@klauspost
- Add error logs when expiryState and transition state are not
initialized (yet)
* metrics: Add missed tier journal entry tasks
* Initialize the ILM worker pool after the object layer
This PR fixes a bug that perhaps has been long introduced,
with no visible workarounds. In any deployment, if an entire
erasure set is deleted, there is no way the cluster recovers.
It also fixes a long-standing bug in expiring transitioned objects.
The expiration action was deleting the current version in the case'
of tiered objects instead of adding a delete marker.
Bonus: enable audit alerts for object versions
beyond the configured value, default is '100'
versions per object beyond which scanner will
alert for each such objects.
Add a hidden configuration under the scanner sub section to configure if
the scanner should sleep between two objects scan. The configuration has
only effect when there is no drive activity related to s3 requests or
healing.
By default, the code will keep the current behavior which is doing
sleep between objects.
To forcefully enable the full scan speed in idle mode, you can do this:
`mc admin config set myminio scanner idle_speed=full`
it is okay if the warm-tier cannot keep up, we should continue
to take I/O at hot-tier, only fail hot-tier or block it when
we are disk full.
Bonus: add metrics counter for these missed tasks, we will
know for sure if one of the node is lagging behind or is
losing too many tasks during transitioning.
Feng Ruohang