Update README.md

Update install.sh - Add interactive domain prompt and EN/RU support

.cargo/deny.toml

@@ -0,0 +1,15 @@
+[bans]
+multiple-versions = "deny"
+wildcards = "allow"
+highlight = "all"
+
+# Explicitly flag the weak cryptography so the agent is forced to justify its existence
+[[bans.skip]]
+name = "md-5"
+version = "*"
+reason = "MUST VERIFY: Only allowed for legacy checksums, never for security."
+
+[[bans.skip]]
+name = "sha1"
+version = "*"
+reason = "MUST VERIFY: Only allowed for backwards compatibility."

.dockerignore

@@ -0,0 +1,8 @@
+.git
+.github
+target
+.kilocode
+cache
+tlsfront
+*.tar
+*.tar.gz

.github/codeql/codeql-config.yml

@@ -7,7 +7,16 @@ queries:
   - uses: security-and-quality
   - uses: ./.github/codeql/queries
 
+paths-ignore:
+  - "**/tests/**"
+  - "**/test/**"
+  - "**/*_test.rs"
+  - "**/*/tests.rs"
 query-filters:
+  - exclude:
+      tags:
+        - test
+
   - exclude:
       id:
         - rust/unwrap-on-option

.github/instructions/Architecture.instructions.md

@@ -0,0 +1,126 @@
+# Architecture Directives
+
+> Companion to `Agents.md`. These are **activation directives**, not tutorials.
+> You already know these patterns — apply them. When making any structural or
+> design decision, run the relevant section below as a checklist.
+
+---
+
+## 1. Active Principles (always on)
+
+Apply these on every non-trivial change. No exceptions.
+
+- **SRP** — one reason to change per component. If you can't name the responsibility in one noun phrase, split it.
+- **OCP** — extend by adding, not by modifying. New variants/impls over patching existing logic.
+- **ISP** — traits stay minimal. More than ~5 methods is a split signal.
+- **DIP** — high-level modules depend on traits, not concrete types. Infrastructure implements domain traits; it does not own domain logic.
+- **DRY** — one authoritative source per piece of knowledge. Copies are bugs that haven't diverged yet.
+- **YAGNI** — generic parameters, extension hooks, and pluggable strategies require an *existing* concrete use case, not a hypothetical one.
+- **KISS** — two equivalent designs: choose the one with fewer concepts. Justify complexity; never assume it.
+
+---
+
+## 2. Layered Architecture
+
+Dependencies point **inward only**: `Presentation → Application → Domain ← Infrastructure`.
+
+- Domain layer: zero I/O. No network, no filesystem, no async runtime imports.
+- Infrastructure: implements domain traits at the boundary. Never leaks SDK/wire types inward.
+- Anti-Corruption Layer (ACL): all third-party and external-protocol types are translated here. If the external format changes, only the ACL changes.
+- Presentation: translates wire/HTTP representations to domain types and back. Nothing else.
+
+---
+
+## 3. Design Pattern Selection
+
+Apply the right pattern. Do not invent a new abstraction when a named pattern fits.
+
+| Situation | Pattern to apply |
+|---|---|
+| Struct with 3+ optional/dependent fields | **Builder** — `build()` returns `Result`, never panics |
+| Cross-cutting behavior (logging, retry, metrics) on a trait impl | **Decorator** — implements same trait, delegates all calls |
+| Subsystem with multiple internal components | **Façade** — single public entry point, internals are `pub(crate)` |
+| Swappable algorithm or policy | **Strategy** — trait injection; generics for compile-time, `dyn` for runtime |
+| Component notifying decoupled consumers | **Observer** — typed channels (`broadcast`, `watch`), not callback `Vec<Box<dyn Fn>>` |
+| Exclusive mutable state serving concurrent callers | **Actor** — `mpsc` command channel + `oneshot` reply; no lock needed on state |
+| Finite state with invalid transition prevention | **Typestate** — distinct types per state; invalid ops are compile errors |
+| Fixed process skeleton with overridable steps | **Template Method** — defaulted trait method calls required hooks |
+| Request pipeline with independent handlers | **Chain/Middleware** — generic compile-time chain for hot paths, `dyn` for runtime assembly |
+| Hiding a concrete type behind a trait | **Factory Function** — returns `Box<dyn Trait>` or `impl Trait` |
+
+---
+
+## 4. Data Modeling Rules
+
+- **Make illegal states unrepresentable.** Type system enforces invariants; runtime validation is a second line, not the first.
+- **Newtype every primitive** that carries domain meaning. `SessionId(u64)` ≠ `UserId(u64)` — the compiler enforces it.
+- **Enums over booleans** for any parameter or field with two or more named states.
+- **Typed error enums** with named variants carrying full diagnostic context. `anyhow` is application-layer only; never in library code.
+- **Domain types carry no I/O concerns.** No `serde`, no codec, no DB derives on domain structs. Conversions via `From`/`TryFrom` at layer boundaries.
+
+---
+
+## 5. Concurrency Rules
+
+- Prefer message-passing over shared memory. Shared state is a fallback.
+- All channels must be **bounded**. Document the bound's rationale inline.
+- Never hold a lock across an `await` unless atomicity explicitly requires it — document why.
+- Document lock acquisition order wherever two locks are taken together.
+- Every `async fn` is cancellation-safe unless explicitly documented otherwise. Mutate shared state *after* the `await` that may be cancelled, not before.
+- High-read/low-write state: use `arc-swap` or `watch` for lock-free reads.
+
+---
+
+## 6. Error Handling Rules
+
+- Errors translated at every layer boundary — low-level errors never surface unmodified.
+- Add context at the propagation site: what operation failed and where.
+- No `unwrap()`/`expect()` in production paths without a comment proving `None`/`Err` is impossible.
+- Panics are only permitted in: tests, startup/init unrecoverable failure, and `unreachable!()` with an invariant comment.
+
+---
+
+## 7. API Design Rules
+
+- **CQS**: functions that return data must not mutate; functions that mutate return only `Result`.
+- **Least surprise**: a function does exactly what its name implies. Side effects are documented.
+- **Idempotency**: `close()`, `shutdown()`, `unregister()` called twice must not panic or error.
+- **Fallibility at the type level**: failure → `Result<T, E>`. No sentinel values.
+- **Minimal public surface**: default to `pub(crate)`. Mark `pub` only deliberate API. Re-export through a single surface in `mod.rs`.
+
+---
+
+## 8. Performance Rules (hot paths)
+
+- Annotate hot-path functions with `// HOT PATH: <throughput requirement>`.
+- Zero allocations per operation in hot paths after initialization. Preallocate in constructors, reuse buffers.
+- Pass `&[u8]` / `Bytes` slices — not `Vec<u8>`. Use `BytesMut` for reusable mutable buffers.
+- No `String` formatting in hot paths. No logging without a rate-limit or sampling gate.
+- Any allocation in a hot path gets a comment: `// ALLOC: <reason and size>`.
+
+---
+
+## 9. Testing Rules
+
+- Bug fixes require a regression test that is **red before the fix, green after**. Name it after the bug.
+- Property tests for: codec round-trips, state machine invariants, cryptographic protocol correctness.
+- No shared mutable state between tests. Each test constructs its own environment.
+- Test doubles hierarchy (simplest first): Fake → Stub → Spy → Mock. Mocks couple to implementation, not behavior — use sparingly.
+
+---
+
+## 10. Pre-Change Checklist
+
+Run this before proposing or implementing any structural decision:
+
+- [ ] Responsibility nameable in one noun phrase?
+- [ ] Layer dependencies point inward only?
+- [ ] Invalid states unrepresentable in the type system?
+- [ ] State transitions gated through a single interface?
+- [ ] All channels bounded?
+- [ ] No locks held across `await` (or documented)?
+- [ ] Errors typed and translated at layer boundaries?
+- [ ] No panics in production paths without invariant proof?
+- [ ] Hot paths annotated and allocation-free?
+- [ ] Public surface minimal — only deliberate API marked `pub`?
+- [ ] Correct pattern chosen from Section 3 table?

.github/instructions/rust_rules.instructions.md

@@ -0,0 +1,135 @@
+---
+description: 'Rust programming language coding conventions and best practices'
+applyTo: '**/*.rs'
+---
+
+# Rust Coding Conventions and Best Practices
+
+Follow idiomatic Rust practices and community standards when writing Rust code. 
+
+These instructions are based on [The Rust Book](https://doc.rust-lang.org/book/), [Rust API Guidelines](https://rust-lang.github.io/api-guidelines/), [RFC 430 naming conventions](https://github.com/rust-lang/rfcs/blob/master/text/0430-finalizing-naming-conventions.md), and the broader Rust community at [users.rust-lang.org](https://users.rust-lang.org).
+
+## General Instructions
+
+- Always prioritize readability, safety, and maintainability.
+- Use strong typing and leverage Rust's ownership system for memory safety.
+- Break down complex functions into smaller, more manageable functions.
+- For algorithm-related code, include explanations of the approach used.
+- Write code with good maintainability practices, including comments on why certain design decisions were made.
+- Handle errors gracefully using `Result<T, E>` and provide meaningful error messages.
+- For external dependencies, mention their usage and purpose in documentation.
+- Use consistent naming conventions following [RFC 430](https://github.com/rust-lang/rfcs/blob/master/text/0430-finalizing-naming-conventions.md).
+- Write idiomatic, safe, and efficient Rust code that follows the borrow checker's rules.
+- Ensure code compiles without warnings.
+
+## Patterns to Follow
+
+- Use modules (`mod`) and public interfaces (`pub`) to encapsulate logic.
+- Handle errors properly using `?`, `match`, or `if let`.
+- Use `serde` for serialization and `thiserror` or `anyhow` for custom errors.
+- Implement traits to abstract services or external dependencies.
+- Structure async code using `async/await` and `tokio` or `async-std`.
+- Prefer enums over flags and states for type safety.
+- Use builders for complex object creation.
+- Split binary and library code (`main.rs` vs `lib.rs`) for testability and reuse.
+- Use `rayon` for data parallelism and CPU-bound tasks.
+- Use iterators instead of index-based loops as they're often faster and safer.
+- Use `&str` instead of `String` for function parameters when you don't need ownership.
+- Prefer borrowing and zero-copy operations to avoid unnecessary allocations.
+
+### Ownership, Borrowing, and Lifetimes
+
+- Prefer borrowing (`&T`) over cloning unless ownership transfer is necessary.
+- Use `&mut T` when you need to modify borrowed data.
+- Explicitly annotate lifetimes when the compiler cannot infer them.
+- Use `Rc<T>` for single-threaded reference counting and `Arc<T>` for thread-safe reference counting.
+- Use `RefCell<T>` for interior mutability in single-threaded contexts and `Mutex<T>` or `RwLock<T>` for multi-threaded contexts.
+
+## Patterns to Avoid
+
+- Don't use `unwrap()` or `expect()` unless absolutely necessary—prefer proper error handling.
+- Avoid panics in library code—return `Result` instead.
+- Don't rely on global mutable state—use dependency injection or thread-safe containers.
+- Avoid deeply nested logic—refactor with functions or combinators.
+- Don't ignore warnings—treat them as errors during CI.
+- Avoid `unsafe` unless required and fully documented.
+- Don't overuse `clone()`, use borrowing instead of cloning unless ownership transfer is needed.
+- Avoid premature `collect()`, keep iterators lazy until you actually need the collection.
+- Avoid unnecessary allocations—prefer borrowing and zero-copy operations.
+
+## Code Style and Formatting
+
+- Follow the Rust Style Guide and use `rustfmt` for automatic formatting.
+- Keep lines under 100 characters when possible.
+- Place function and struct documentation immediately before the item using `///`.
+- Use `cargo clippy` to catch common mistakes and enforce best practices.
+
+## Error Handling
+
+- Use `Result<T, E>` for recoverable errors and `panic!` only for unrecoverable errors.
+- Prefer `?` operator over `unwrap()` or `expect()` for error propagation.
+- Create custom error types using `thiserror` or implement `std::error::Error`.
+- Use `Option<T>` for values that may or may not exist.
+- Provide meaningful error messages and context.
+- Error types should be meaningful and well-behaved (implement standard traits).
+- Validate function arguments and return appropriate errors for invalid input.
+
+## API Design Guidelines
+
+### Common Traits Implementation
+Eagerly implement common traits where appropriate:
+- `Copy`, `Clone`, `Eq`, `PartialEq`, `Ord`, `PartialOrd`, `Hash`, `Debug`, `Display`, `Default`
+- Use standard conversion traits: `From`, `AsRef`, `AsMut`
+- Collections should implement `FromIterator` and `Extend`
+- Note: `Send` and `Sync` are auto-implemented by the compiler when safe; avoid manual implementation unless using `unsafe` code
+
+### Type Safety and Predictability
+- Use newtypes to provide static distinctions
+- Arguments should convey meaning through types; prefer specific types over generic `bool` parameters
+- Use `Option<T>` appropriately for truly optional values
+- Functions with a clear receiver should be methods
+- Only smart pointers should implement `Deref` and `DerefMut`
+
+### Future Proofing
+- Use sealed traits to protect against downstream implementations
+- Structs should have private fields
+- Functions should validate their arguments
+- All public types must implement `Debug`
+
+## Testing and Documentation
+
+- Write comprehensive unit tests using `#[cfg(test)]` modules and `#[test]` annotations.
+- Use test modules alongside the code they test (`mod tests { ... }`).
+- Write integration tests in `tests/` directory with descriptive filenames.
+- Write clear and concise comments for each function, struct, enum, and complex logic.
+- Ensure functions have descriptive names and include comprehensive documentation.
+- Document all public APIs with rustdoc (`///` comments) following the [API Guidelines](https://rust-lang.github.io/api-guidelines/).
+- Use `#[doc(hidden)]` to hide implementation details from public documentation.
+- Document error conditions, panic scenarios, and safety considerations.
+- Examples should use `?` operator, not `unwrap()` or deprecated `try!` macro.
+
+## Project Organization
+
+- Use semantic versioning in `Cargo.toml`.
+- Include comprehensive metadata: `description`, `license`, `repository`, `keywords`, `categories`.
+- Use feature flags for optional functionality.
+- Organize code into modules using `mod.rs` or named files.
+- Keep `main.rs` or `lib.rs` minimal - move logic to modules.
+
+## Quality Checklist
+
+Before publishing or reviewing Rust code, ensure:
+
+### Core Requirements
+- [ ] **Naming**: Follows RFC 430 naming conventions
+- [ ] **Traits**: Implements `Debug`, `Clone`, `PartialEq` where appropriate
+- [ ] **Error Handling**: Uses `Result<T, E>` and provides meaningful error types
+- [ ] **Documentation**: All public items have rustdoc comments with examples
+- [ ] **Testing**: Comprehensive test coverage including edge cases
+
+### Safety and Quality
+- [ ] **Safety**: No unnecessary `unsafe` code, proper error handling
+- [ ] **Performance**: Efficient use of iterators, minimal allocations
+- [ ] **API Design**: Functions are predictable, flexible, and type-safe
+- [ ] **Future Proofing**: Private fields in structs, sealed traits where appropriate
+- [ ] **Tooling**: Code passes `cargo fmt`, `cargo clippy`, and `cargo test`

.github/instructions/self-explanatory-code-commenting.instructions.md

@@ -0,0 +1,162 @@
+---
+description: 'Guidelines for GitHub Copilot to write comments to achieve self-explanatory code with less comments. Examples are in JavaScript but it should work on any language that has comments.'
+applyTo: '**'
+---
+
+# Self-explanatory Code Commenting Instructions
+
+## Core Principle
+**Write code that speaks for itself. Comment only when necessary to explain WHY, not WHAT.**
+We do not need comments most of the time.
+
+## Commenting Guidelines
+
+### ❌ AVOID These Comment Types
+
+**Obvious Comments**
+```javascript
+// Bad: States the obvious
+let counter = 0;  // Initialize counter to zero
+counter++;  // Increment counter by one
+```
+
+**Redundant Comments**
+```javascript
+// Bad: Comment repeats the code
+function getUserName() {
+    return user.name;  // Return the user's name
+}
+```
+
+**Outdated Comments**
+```javascript
+// Bad: Comment doesn't match the code
+// Calculate tax at 5% rate
+const tax = price * 0.08;  // Actually 8%
+```
+
+### ✅ WRITE These Comment Types
+
+**Complex Business Logic**
+```javascript
+// Good: Explains WHY this specific calculation
+// Apply progressive tax brackets: 10% up to 10k, 20% above
+const tax = calculateProgressiveTax(income, [0.10, 0.20], [10000]);
+```
+
+**Non-obvious Algorithms**
+```javascript
+// Good: Explains the algorithm choice
+// Using Floyd-Warshall for all-pairs shortest paths
+// because we need distances between all nodes
+for (let k = 0; k < vertices; k++) {
+    for (let i = 0; i < vertices; i++) {
+        for (let j = 0; j < vertices; j++) {
+            // ... implementation
+        }
+    }
+}
+```
+
+**Regex Patterns**
+```javascript
+// Good: Explains what the regex matches
+// Match email format: username@domain.extension
+const emailPattern = /^[a-zA-Z0-9._%+-]+@[a-zA-Z0-9.-]+\.[a-zA-Z]{2,}$/;
+```
+
+**API Constraints or Gotchas**
+```javascript
+// Good: Explains external constraint
+// GitHub API rate limit: 5000 requests/hour for authenticated users
+await rateLimiter.wait();
+const response = await fetch(githubApiUrl);
+```
+
+## Decision Framework
+
+Before writing a comment, ask:
+1. **Is the code self-explanatory?** → No comment needed
+2. **Would a better variable/function name eliminate the need?** → Refactor instead
+3. **Does this explain WHY, not WHAT?** → Good comment
+4. **Will this help future maintainers?** → Good comment
+
+## Special Cases for Comments
+
+### Public APIs
+```javascript
+/**
+ * Calculate compound interest using the standard formula.
+ * 
+ * @param {number} principal - Initial amount invested
+ * @param {number} rate - Annual interest rate (as decimal, e.g., 0.05 for 5%)
+ * @param {number} time - Time period in years
+ * @param {number} compoundFrequency - How many times per year interest compounds (default: 1)
+ * @returns {number} Final amount after compound interest
+ */
+function calculateCompoundInterest(principal, rate, time, compoundFrequency = 1) {
+    // ... implementation
+}
+```
+
+### Configuration and Constants
+```javascript
+// Good: Explains the source or reasoning
+const MAX_RETRIES = 3;  // Based on network reliability studies
+const API_TIMEOUT = 5000;  // AWS Lambda timeout is 15s, leaving buffer
+```
+
+### Annotations
+```javascript
+// TODO: Replace with proper user authentication after security review
+// FIXME: Memory leak in production - investigate connection pooling
+// HACK: Workaround for bug in library v2.1.0 - remove after upgrade
+// NOTE: This implementation assumes UTC timezone for all calculations
+// WARNING: This function modifies the original array instead of creating a copy
+// PERF: Consider caching this result if called frequently in hot path
+// SECURITY: Validate input to prevent SQL injection before using in query
+// BUG: Edge case failure when array is empty - needs investigation
+// REFACTOR: Extract this logic into separate utility function for reusability
+// DEPRECATED: Use newApiFunction() instead - this will be removed in v3.0
+```
+
+## Anti-Patterns to Avoid
+
+### Dead Code Comments
+```javascript
+// Bad: Don't comment out code
+// const oldFunction = () => { ... };
+const newFunction = () => { ... };
+```
+
+### Changelog Comments
+```javascript
+// Bad: Don't maintain history in comments
+// Modified by John on 2023-01-15
+// Fixed bug reported by Sarah on 2023-02-03
+function processData() {
+    // ... implementation
+}
+```
+
+### Divider Comments
+```javascript
+// Bad: Don't use decorative comments
+//=====================================
+// UTILITY FUNCTIONS
+//=====================================
+```
+
+## Quality Checklist
+
+Before committing, ensure your comments:
+- [ ] Explain WHY, not WHAT
+- [ ] Are grammatically correct and clear
+- [ ] Will remain accurate as code evolves
+- [ ] Add genuine value to code understanding
+- [ ] Are placed appropriately (above the code they describe)
+- [ ] Use proper spelling and professional language
+
+## Summary
+
+Remember: **The best comment is the one you don't need to write because the code is self-documenting.**

.github/workflows/build.yml

@@ -0,0 +1,45 @@
+name: Build
+
+on:
+  push:
+    branches: [ "*" ]
+  pull_request:
+    branches: [ "*" ]
+
+env:
+  CARGO_TERM_COLOR: always
+
+jobs:
+  build:
+    name: Build
+    runs-on: ubuntu-latest
+
+    permissions:
+      contents: read
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Install latest stable Rust toolchain
+        uses: dtolnay/rust-toolchain@stable
+
+      - name: Cache cargo registry & build artifacts
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.cargo/registry
+            ~/.cargo/git
+            target
+          key: ${{ runner.os }}-cargo-${{ hashFiles('**/Cargo.lock') }}
+          restore-keys: |
+            ${{ runner.os }}-cargo-
+
+      - name: Build Release
+        run: cargo build --release --verbose
+
+      - name: Upload binary artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: telemt
+          path: target/release/telemt

.github/workflows/check.yml

@@ -0,0 +1,139 @@
+name: Check
+
+on:
+  push:
+    branches: [ "*" ]
+  pull_request:
+    branches: [ "*" ]
+
+env:
+  CARGO_TERM_COLOR: always
+
+concurrency:
+  group: test-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+# ==========================
+# Formatting
+# ==========================
+  fmt:
+    name: Fmt
+    runs-on: ubuntu-latest
+
+    permissions:
+      contents: read
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: dtolnay/rust-toolchain@stable
+        with:
+          components: rustfmt
+
+      - run: cargo fmt -- --check
+
+# ==========================
+# Tests
+# ==========================
+  test:
+    name: Test
+    runs-on: ubuntu-latest
+
+    permissions:
+      contents: read
+      actions: write
+      checks: write
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: dtolnay/rust-toolchain@stable
+
+      - name: Cache cargo
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.cargo/bin
+            ~/.cargo/registry
+            ~/.cargo/git
+            target
+          key: ${{ runner.os }}-cargo-nextest-${{ hashFiles('**/Cargo.lock') }}
+          restore-keys: |
+            ${{ runner.os }}-cargo-nextest-
+            ${{ runner.os }}-cargo-
+
+      - name: Install cargo-nextest
+        run: cargo install --locked cargo-nextest || true
+
+      - name: Run tests with nextest
+        run: cargo nextest run -j "$(nproc)"
+
+# ==========================
+# Clippy
+# ==========================
+  clippy:
+    name: Clippy
+    runs-on: ubuntu-latest
+
+    permissions:
+      contents: read
+      checks: write
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: dtolnay/rust-toolchain@stable
+        with:
+          components: clippy
+
+      - name: Cache cargo
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.cargo/registry
+            ~/.cargo/git
+            target
+          key: ${{ runner.os }}-cargo-clippy-${{ hashFiles('**/Cargo.lock') }}
+          restore-keys: |
+            ${{ runner.os }}-cargo-clippy-
+            ${{ runner.os }}-cargo-
+
+      - name: Run clippy
+        run: cargo clippy -j "$(nproc)" -- --cap-lints warn
+
+# ==========================
+# Udeps
+# ==========================
+  udeps:
+    name: Udeps
+    runs-on: ubuntu-latest
+
+    permissions:
+      contents: read
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - uses: dtolnay/rust-toolchain@stable
+        with:
+          components: rust-src
+
+      - name: Cache cargo
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.cargo/bin
+            ~/.cargo/registry
+            ~/.cargo/git
+            target
+          key: ${{ runner.os }}-cargo-udeps-${{ hashFiles('**/Cargo.lock') }}
+          restore-keys: |
+            ${{ runner.os }}-cargo-udeps-
+            ${{ runner.os }}-cargo-
+
+      - name: Install cargo-udeps
+        run: cargo install --locked cargo-udeps || true
+
+      - name: Run udeps
+        run: cargo udeps -j "$(nproc)" || true

.github/workflows/release.yml

@@ -5,37 +5,87 @@ on:
     tags:
       - '[0-9]+.[0-9]+.[0-9]+'
   workflow_dispatch:
+    inputs:
+      tag:
+        description: 'Release tag (example: 3.3.15)'
+        required: true
+        type: string
+
+concurrency:
+  group: release-${{ github.ref_name }}-${{ github.event.inputs.tag || 'auto' }}
+  cancel-in-progress: true
 
 permissions:
   contents: read
-  packages: write
 
 env:
   CARGO_TERM_COLOR: always
+  BINARY_NAME: telemt
 
 jobs:
-  build:
-    name: Build ${{ matrix.target }}
+  prepare:
+    name: Prepare
     runs-on: ubuntu-latest
-    permissions:
-      contents: read
+
+    outputs:
+      version: ${{ steps.vars.outputs.version }}
+      prerelease: ${{ steps.vars.outputs.prerelease }}
+
+    steps:
+      - name: Resolve version
+        id: vars
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          if [ "${GITHUB_EVENT_NAME}" = "workflow_dispatch" ]; then
+            VERSION="${{ github.event.inputs.tag }}"
+          else
+            VERSION="${GITHUB_REF#refs/tags/}"
+          fi
+
+          VERSION="${VERSION#refs/tags/}"
+
+          if [ -z "${VERSION}" ]; then
+            echo "Release version is empty" >&2
+            exit 1
+          fi
+
+          if [[ "${VERSION}" == *-* ]]; then
+            PRERELEASE=true
+          else
+            PRERELEASE=false
+          fi
+
+          echo "version=${VERSION}" >> "${GITHUB_OUTPUT}"
+          echo "prerelease=${PRERELEASE}" >> "${GITHUB_OUTPUT}"
+
+  # ==========================
+  # GNU / glibc
+  # ==========================
+  build-gnu:
+    name: GNU ${{ matrix.asset }}
+    runs-on: ubuntu-latest
+    needs: prepare
+
+    container:
+      image: rust:slim-bookworm
 
     strategy:
       fail-fast: false
       matrix:
         include:
           - target: x86_64-unknown-linux-gnu
-            artifact_name: telemt
-            asset_name: telemt-x86_64-linux-gnu
+            asset: telemt-x86_64-linux-gnu
+            cpu: baseline
+
+          - target: x86_64-unknown-linux-gnu
+            asset: telemt-x86_64-v3-linux-gnu
+            cpu: v3
+
           - target: aarch64-unknown-linux-gnu
-            artifact_name: telemt
-            asset_name: telemt-aarch64-linux-gnu
-          - target: x86_64-unknown-linux-musl
-            artifact_name: telemt
-            asset_name: telemt-x86_64-linux-musl
-          - target: aarch64-unknown-linux-musl
-            artifact_name: telemt
-            asset_name: telemt-aarch64-linux-musl
+            asset: telemt-aarch64-linux-gnu
+            cpu: generic
 
     steps:
       - uses: actions/checkout@v4
@@ -43,47 +93,261 @@ jobs:
       - uses: dtolnay/rust-toolchain@v1
         with:
           toolchain: stable
-          targets: ${{ matrix.target }}
+          targets: |
+            x86_64-unknown-linux-gnu
+            aarch64-unknown-linux-gnu
 
-      - name: Install cross-compilation tools
+      - name: Install deps
         run: |
-          sudo apt-get update
-          sudo apt-get install -y gcc-aarch64-linux-gnu
+          apt-get update
+          apt-get install -y \
+            build-essential \
+            clang \
+            lld \
+            pkg-config \
+            gcc-aarch64-linux-gnu \
+            g++-aarch64-linux-gnu
 
       - uses: actions/cache@v4
         with:
           path: |
-            ~/.cargo/registry
-            ~/.cargo/git
+            /usr/local/cargo/registry
+            /usr/local/cargo/git
             target
-          key: ${{ runner.os }}-${{ matrix.target }}-cargo-${{ hashFiles('**/Cargo.lock') }}
+          key: gnu-${{ matrix.asset }}-${{ hashFiles('**/Cargo.lock') }}
           restore-keys: |
-            ${{ runner.os }}-${{ matrix.target }}-cargo-
+            gnu-${{ matrix.asset }}-
+            gnu-
 
-      - name: Install cross
-        run: cargo install cross --git https://github.com/cross-rs/cross
-
-      - name: Build Release
-        env:
-          RUSTFLAGS: ${{ contains(matrix.target, 'musl') && '-C target-feature=+crt-static' || '' }}
-        run: cross build --release --target ${{ matrix.target }}
-
-      - name: Package binary
+      - name: Build
+        shell: bash
         run: |
-          cd target/${{ matrix.target }}/release
-          tar -czvf ${{ matrix.asset_name }}.tar.gz ${{ matrix.artifact_name }}
-          sha256sum ${{ matrix.asset_name }}.tar.gz > ${{ matrix.asset_name }}.sha256
+          set -euo pipefail
+
+          if [ "${{ matrix.target }}" = "aarch64-unknown-linux-gnu" ]; then
+            export CC=aarch64-linux-gnu-gcc
+            export CXX=aarch64-linux-gnu-g++
+            export RUSTFLAGS="-C linker=aarch64-linux-gnu-gcc -C lto=fat -C panic=abort"
+          else
+            export CC=clang
+            export CXX=clang++
+
+            if [ "${{ matrix.cpu }}" = "v3" ]; then
+              CPU_FLAGS="-C target-cpu=x86-64-v3"
+            else
+              CPU_FLAGS="-C target-cpu=x86-64"
+            fi
+
+            export RUSTFLAGS="-C linker=clang -C link-arg=-fuse-ld=lld -C lto=fat -C panic=abort ${CPU_FLAGS}"
+          fi
+
+          cargo build --release --target ${{ matrix.target }} -j "$(nproc)"
+
+      - name: Package
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          mkdir -p dist
+          cp "target/${{ matrix.target }}/release/${{ env.BINARY_NAME }}" dist/telemt
+
+          if [ "${{ matrix.target }}" = "aarch64-unknown-linux-gnu" ]; then
+            STRIP_BIN=aarch64-linux-gnu-strip
+          else
+            STRIP_BIN=strip
+          fi
+
+          "${STRIP_BIN}" dist/telemt
+
+          cd dist
+          tar -czf "${{ matrix.asset }}.tar.gz" \
+            --owner=0 --group=0 --numeric-owner \
+            telemt
+
+          sha256sum "${{ matrix.asset }}.tar.gz" > "${{ matrix.asset }}.tar.gz.sha256"
 
       - uses: actions/upload-artifact@v4
         with:
-          name: ${{ matrix.asset_name }}
-          path: |
-            target/${{ matrix.target }}/release/${{ matrix.asset_name }}.tar.gz
-            target/${{ matrix.target }}/release/${{ matrix.asset_name }}.sha256
+          name: ${{ matrix.asset }}
+          path: dist/*
 
-  build-docker-image:
-    needs: build
+  # ==========================
+  # MUSL
+  # ==========================
+  build-musl:
+    name: MUSL ${{ matrix.asset }}
     runs-on: ubuntu-latest
+    needs: prepare
+
+    container:
+      image: rust:slim-bookworm
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - target: x86_64-unknown-linux-musl
+            asset: telemt-x86_64-linux-musl
+            cpu: baseline
+
+          - target: x86_64-unknown-linux-musl
+            asset: telemt-x86_64-v3-linux-musl
+            cpu: v3
+
+          - target: aarch64-unknown-linux-musl
+            asset: telemt-aarch64-linux-musl
+            cpu: generic
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install deps
+        run: |
+          apt-get update
+          apt-get install -y \
+            musl-tools \
+            pkg-config \
+            curl
+
+      - uses: actions/cache@v4
+        if: matrix.target == 'aarch64-unknown-linux-musl'
+        with:
+          path: ~/.musl-aarch64
+          key: musl-toolchain-aarch64-v1
+
+      - name: Install aarch64 musl toolchain
+        if: matrix.target == 'aarch64-unknown-linux-musl'
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          TOOLCHAIN_DIR="$HOME/.musl-aarch64"
+          ARCHIVE="aarch64-linux-musl-cross.tgz"
+          URL="https://github.com/telemt/telemt/releases/download/toolchains/${ARCHIVE}"
+
+          if [ -x "${TOOLCHAIN_DIR}/bin/aarch64-linux-musl-gcc" ]; then
+            echo "MUSL toolchain cached"
+          else
+            curl -fL \
+              --retry 5 \
+              --retry-delay 3 \
+              --connect-timeout 10 \
+              --max-time 120 \
+              -o "${ARCHIVE}" "${URL}"
+
+            mkdir -p "${TOOLCHAIN_DIR}"
+            tar -xzf "${ARCHIVE}" --strip-components=1 -C "${TOOLCHAIN_DIR}"
+          fi
+
+          echo "${TOOLCHAIN_DIR}/bin" >> "${GITHUB_PATH}"
+
+      - name: Add rust target
+        run: rustup target add ${{ matrix.target }}
+
+      - uses: actions/cache@v4
+        with:
+          path: |
+            /usr/local/cargo/registry
+            /usr/local/cargo/git
+            target
+          key: musl-${{ matrix.asset }}-${{ hashFiles('**/Cargo.lock') }}
+          restore-keys: |
+            musl-${{ matrix.asset }}-
+            musl-
+
+      - name: Build
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          if [ "${{ matrix.target }}" = "aarch64-unknown-linux-musl" ]; then
+            export CC=aarch64-linux-musl-gcc
+            export CC_aarch64_unknown_linux_musl=aarch64-linux-musl-gcc
+            export RUSTFLAGS="-C target-feature=+crt-static -C linker=aarch64-linux-musl-gcc -C lto=fat -C panic=abort"
+          else
+            export CC=musl-gcc
+            export CC_x86_64_unknown_linux_musl=musl-gcc
+
+            if [ "${{ matrix.cpu }}" = "v3" ]; then
+              CPU_FLAGS="-C target-cpu=x86-64-v3"
+            else
+              CPU_FLAGS="-C target-cpu=x86-64"
+            fi
+
+            export RUSTFLAGS="-C target-feature=+crt-static -C lto=fat -C panic=abort ${CPU_FLAGS}"
+          fi
+
+          cargo build --release --target ${{ matrix.target }} -j "$(nproc)"
+
+      - name: Package
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          mkdir -p dist
+          cp "target/${{ matrix.target }}/release/${{ env.BINARY_NAME }}" dist/telemt
+
+          if [ "${{ matrix.target }}" = "aarch64-unknown-linux-musl" ]; then
+            STRIP_BIN=aarch64-linux-musl-strip
+          else
+            STRIP_BIN=strip
+          fi
+
+          "${STRIP_BIN}" dist/telemt
+
+          cd dist
+          tar -czf "${{ matrix.asset }}.tar.gz" \
+            --owner=0 --group=0 --numeric-owner \
+            telemt
+
+          sha256sum "${{ matrix.asset }}.tar.gz" > "${{ matrix.asset }}.tar.gz.sha256"
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.asset }}
+          path: dist/*
+
+  # ==========================
+  # Release
+  # ==========================
+  release:
+    name: Release
+    runs-on: ubuntu-latest
+    needs: [prepare, build-gnu, build-musl]
+
+    permissions:
+      contents: write
+
+    steps:
+      - uses: actions/download-artifact@v4
+        with:
+          path: artifacts
+
+      - name: Flatten artifacts
+        shell: bash
+        run: |
+          set -euo pipefail
+          mkdir -p dist
+          find artifacts -type f -exec cp {} dist/ \;
+
+      - name: Create GitHub Release
+        uses: softprops/action-gh-release@v2
+        with:
+          tag_name: ${{ needs.prepare.outputs.version }}
+          target_commitish: ${{ github.sha }}
+          files: dist/*
+          generate_release_notes: true
+          prerelease: ${{ needs.prepare.outputs.prerelease == 'true' }}
+          overwrite_files: true
+
+  # ==========================
+  # Docker
+  # ==========================
+  docker:
+    name: Docker
+    runs-on: ubuntu-latest
+    needs: [prepare, release]
+
     permissions:
       contents: read
       packages: write
@@ -92,48 +356,66 @@ jobs:
       - uses: actions/checkout@v4
 
       - uses: docker/setup-qemu-action@v3
+
       - uses: docker/setup-buildx-action@v3
 
-      - name: Login to GHCR
-        uses: docker/login-action@v3
+      - uses: docker/login-action@v3
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
-      - name: Extract version
-        id: vars
-        run: echo "VERSION=${GITHUB_REF#refs/tags/}" >> $GITHUB_OUTPUT
+      - name: Probe release assets
+        shell: bash
+        env:
+          VERSION: ${{ needs.prepare.outputs.version }}
+        run: |
+          set -euo pipefail
 
-      - name: Build and push
+          for asset in \
+            telemt-x86_64-linux-musl.tar.gz \
+            telemt-x86_64-linux-musl.tar.gz.sha256 \
+            telemt-aarch64-linux-musl.tar.gz \
+            telemt-aarch64-linux-musl.tar.gz.sha256
+          do
+            curl -fsIL \
+              --retry 10 \
+              --retry-delay 3 \
+              "https://github.com/${GITHUB_REPOSITORY}/releases/download/${VERSION}/${asset}" \
+              > /dev/null
+          done
+
+      - name: Compute image tags
+        id: meta
+        shell: bash
+        env:
+          VERSION: ${{ needs.prepare.outputs.version }}
+        run: |
+          set -euo pipefail
+
+          IMAGE="$(echo "ghcr.io/${GITHUB_REPOSITORY}" | tr '[:upper:]' '[:lower:]')"
+          TAGS="${IMAGE}:${VERSION}"
+
+          if [[ "${VERSION}" != *-* ]]; then
+            TAGS="${TAGS}"$'\n'"${IMAGE}:latest"
+          fi
+
+          {
+            echo "tags<<EOF"
+            printf '%s\n' "${TAGS}"
+            echo "EOF"
+          } >> "${GITHUB_OUTPUT}"
+
+      - name: Build & Push
         uses: docker/build-push-action@v6
         with:
           context: .
           push: true
-          tags: |
-            ghcr.io/${{ github.repository }}:${{ steps.vars.outputs.VERSION }}
-            ghcr.io/${{ github.repository }}:latest
-
-  release:
-    name: Create Release
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - uses: actions/download-artifact@v4
-        with:
-          path: artifacts
-
-      - name: Create Release
-        uses: softprops/action-gh-release@v2
-        with:
-          files: artifacts/**/*
-          generate_release_notes: true
-          draft: false
-          prerelease: ${{ contains(github.ref, '-rc') || contains(github.ref, '-beta') || contains(github.ref, '-alpha') }}
+          pull: true
+          platforms: linux/amd64,linux/arm64
+          tags: ${{ steps.meta.outputs.tags }}
+          build-args: |
+            TELEMT_REPOSITORY=${{ github.repository }}
+            TELEMT_VERSION=${{ needs.prepare.outputs.version }}
+          cache-from: type=gha
+          cache-to: type=gha,mode=max

.github/workflows/rust.yml

@@ -1,54 +0,0 @@
-name: Rust
-
-on:
-  push:
-    branches: [ "*" ]
-  pull_request:
-    branches: [ "*" ]
-
-env:
-  CARGO_TERM_COLOR: always
-
-jobs:
-  build:
-    name: Build
-    runs-on: ubuntu-latest
-
-    permissions:
-      contents: read
-      actions: write
-      checks: write
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-
-    - name: Install latest stable Rust toolchain
-      uses: dtolnay/rust-toolchain@stable
-      with:
-        components: rustfmt, clippy
-
-    - name: Cache cargo registry & build artifacts
-      uses: actions/cache@v4
-      with:
-        path: |
-          ~/.cargo/registry
-          ~/.cargo/git
-          target
-        key: ${{ runner.os }}-cargo-${{ hashFiles('**/Cargo.lock') }}
-        restore-keys: |
-          ${{ runner.os }}-cargo-
-
-    - name: Build Release
-      run: cargo build --release --verbose
-
-    - name: Run tests
-      run: cargo test --verbose
-
-# clippy dont fail on warnings because of active development of telemt 
-# and many warnings
-    - name: Run clippy
-      run: cargo clippy -- --cap-lints warn
-
-    - name: Check for unused dependencies
-      run: cargo udeps || true

.gitignore

@@ -21,3 +21,4 @@ target
 #.idea/
 
 proxy-secret
+coverage-html/

.kilocode/rules-architect/AGENTS.md

@@ -1,58 +0,0 @@
-# Architect Mode Rules for Telemt
-
-## Architecture Overview
-
-```mermaid
-graph TB
-    subgraph Entry
-        Client[Clients] --> Listener[TCP/Unix Listener]
-    end
-    
-    subgraph Proxy Layer
-        Listener --> ClientHandler[ClientHandler]
-        ClientHandler --> Handshake[Handshake Validator]
-        Handshake --> |Valid| Relay[Relay Layer]
-        Handshake --> |Invalid| Masking[Masking/TLS Fronting]
-    end
-    
-    subgraph Transport
-        Relay --> MiddleProxy[Middle-End Proxy Pool]
-        Relay --> DirectRelay[Direct DC Relay]
-        MiddleProxy --> TelegramDC[Telegram DCs]
-        DirectRelay --> TelegramDC
-    end
-```
-
-## Module Dependencies
-- [`src/main.rs`](src/main.rs) - Entry point, spawns all async tasks
-- [`src/config/`](src/config/) - Configuration loading with auto-migration
-- [`src/error.rs`](src/error.rs) - Error types, must be used by all modules
-- [`src/crypto/`](src/crypto/) - AES, SHA, random number generation
-- [`src/protocol/`](src/protocol/) - MTProto constants, frame encoding, obfuscation
-- [`src/stream/`](src/stream/) - Stream wrappers, buffer pool, frame codecs
-- [`src/proxy/`](src/proxy/) - Client handling, handshake, relay logic
-- [`src/transport/`](src/transport/) - Upstream management, middle-proxy, SOCKS support
-- [`src/stats/`](src/stats/) - Statistics and replay protection
-- [`src/ip_tracker.rs`](src/ip_tracker.rs) - Per-user IP tracking
-
-## Key Architectural Constraints
-
-### Middle-End Proxy Mode
-- Requires public IP on interface OR 1:1 NAT with STUN probing
-- Uses separate `proxy-secret` from Telegram (NOT user secrets)
-- Falls back to direct mode automatically on STUN mismatch
-
-### TLS Fronting
-- Invalid handshakes are transparently proxied to `mask_host`
-- This is critical for DPI evasion - do not change this behavior
-- `mask_unix_sock` and `mask_host` are mutually exclusive
-
-### Stream Architecture
-- Buffer pool is shared globally via Arc - prevents allocation storms
-- Frame codecs implement tokio-util Encoder/Decoder traits
-- State machine in [`src/stream/state.rs`](src/stream/state.rs) manages stream transitions
-
-### Configuration Migration
-- [`ProxyConfig::load()`](src/config/mod.rs:641) mutates config in-place
-- New fields must have sensible defaults
-- DC203 override is auto-injected for CDN/media support

.kilocode/rules-code/AGENTS.md

@@ -1,23 +0,0 @@
-# Code Mode Rules for Telemt
-
-## Error Handling
-- Always use [`ProxyError`](src/error.rs:168) from [`src/error.rs`](src/error.rs) for proxy operations
-- [`HandshakeResult<T,R,W>`](src/error.rs:292) returns streams on bad client - these MUST be returned for masking, never dropped
-- Use [`Recoverable`](src/error.rs:110) trait to check if errors are retryable
-
-## Configuration Changes
-- [`ProxyConfig::load()`](src/config/mod.rs:641) auto-mutates config - new fields should have defaults
-- DC203 override is auto-injected if missing - do not remove this behavior
-- When adding config fields, add migration logic in [`ProxyConfig::load()`](src/config/mod.rs:641)
-
-## Crypto Code
-- [`SecureRandom`](src/crypto/random.rs) from [`src/crypto/random.rs`](src/crypto/random.rs) must be used for all crypto operations
-- Never use `rand::thread_rng()` directly - use the shared `Arc<SecureRandom>`
-
-## Stream Handling
-- Buffer pool [`BufferPool`](src/stream/buffer_pool.rs) is shared via Arc - always use it instead of allocating
-- Frame codecs in [`src/stream/frame_codec.rs`](src/stream/frame_codec.rs) implement tokio-util's Encoder/Decoder traits
-
-## Testing
-- Tests are inline in modules using `#[cfg(test)]`
-- Use `cargo test --lib <module_name>` to run tests for specific modules

.kilocode/rules-debug/AGENTS.md

@@ -1,27 +0,0 @@
-# Debug Mode Rules for Telemt
-
-## Logging
-- `RUST_LOG` environment variable takes absolute priority over all config log levels
-- Log levels: `trace`, `debug`, `info`, `warn`, `error`
-- Use `RUST_LOG=debug cargo run` for detailed operational logs
-- Use `RUST_LOG=trace cargo run` for full protocol-level debugging
-
-## Middle-End Proxy Debugging
-- Set `ME_DIAG=1` environment variable for high-precision cryptography diagnostics
-- STUN probe results are logged at startup - check for mismatch between local and reflected IP
-- If Middle-End fails, check `proxy_secret_path` points to valid file from https://core.telegram.org/getProxySecret
-
-## Connection Issues
-- DC connectivity is logged at startup with RTT measurements
-- If DC ping fails, check `dc_overrides` for custom addresses
-- Use `prefer_ipv6=false` in config if IPv6 is unreliable
-
-## TLS Fronting Issues
-- Invalid handshakes are proxied to `mask_host` - check this host is reachable
-- `mask_unix_sock` and `mask_host` are mutually exclusive - only one can be set
-- If `mask_unix_sock` is set, socket must exist before connections arrive
-
-## Common Errors
-- `ReplayAttack` - client replayed a handshake nonce, potential attack
-- `TimeSkew` - client clock is off, can disable with `ignore_time_skew=true`
-- `TgHandshakeTimeout` - upstream DC connection failed, check network

AGENTS.md

@@ -5,6 +5,22 @@ Your responses are precise, minimal, and architecturally sound. You are working
 
 ---
 
+### Context: The Telemt Project
+
+You are working on **Telemt**, a high-performance, production-grade Telegram MTProxy implementation written in Rust. It is explicitly designed to operate in highly hostile network environments and evade advanced network censorship.
+
+**Adversarial Threat Model:**
+The proxy operates under constant surveillance by DPI (Deep Packet Inspection) systems and active scanners (state firewalls, mobile operator fraud controls). These entities actively probe IPs, analyze protocol handshakes, and look for known proxy signatures to block or throttle traffic.
+
+**Core Architectural Pillars:**
+1. **TLS-Fronting (TLS-F) & TCP-Splitting (TCP-S):** To the outside world, Telemt looks like a standard TLS server. If a client presents a valid MTProxy key, the connection is handled internally. If a censor's scanner, web browser, or unauthorized crawler connects, Telemt seamlessly splices the TCP connection (L4) to a real, legitimate HTTPS fallback server (e.g., Nginx) without modifying the `ClientHello` or terminating the TLS handshake.
+2. **Middle-End (ME) Orchestration:** A highly concurrent, generation-based pool managing upstream connections to Telegram Datacenters (DCs). It utilizes an **Adaptive Floor** (dynamically scaling writer connections based on traffic), **Hardswaps** (zero-downtime pool reconfiguration), and **STUN/NAT** reflection mechanisms. 
+3. **Strict KDF Routing:** Cryptographic Key Derivation Functions (KDF) in this protocol strictly rely on the exact pairing of Source IP/Port and Destination IP/Port. Deviations or missing port logic will silently break the MTProto handshake.
+4. **Data Plane vs. Control Plane Isolation:** The Data Plane (readers, writers, payload relay, TCP splicing) must remain strictly non-blocking, zero-allocation in hot paths, and highly resilient to network backpressure. The Control Plane (API, metrics, pool generation swaps, config reloads) orchestrates the state asynchronously without stalling the Data Plane.
+
+Any modification you make must preserve Telemt's invisibility to censors, its strict memory-safety invariants, and its hot-path throughput.
+
+
 ### 0. Priority Resolution — Scope Control
 
 This section resolves conflicts between code quality enforcement and scope limitation.
@@ -374,6 +390,12 @@ you MUST explain why existing invariants remain valid.
 - Do not modify existing tests unless the task explicitly requires it.
 - Do not weaken assertions.
 - Preserve determinism in testable components.
+- Bug-first forces the discipline of proving you understand a bug before you fix it. Tests written after a fix almost always pass trivially and catch nothing new.
+- Invariants over scenarios is the core shift. The route_mode table alone would have caught both BUG-1 and BUG-2 before they were written — "snapshot equals watch state after any transition burst" is a two-line property test that fails immediately on the current diverged-atomics code.
+- Differential/model catches logic drift over time.
+- Scheduler pressure is specifically aimed at the concurrent state bugs that keep reappearing. A single-threaded happy-path test of set_mode will never find subtle bugs; 10,000 concurrent calls will find it on the first run.
+- Mutation gate answers your original complaint directly. It measures test power. If you can remove a bounds check and nothing breaks, the suite isn't covering that branch yet — it just says so explicitly.
+- Dead parameter is a code smell rule. 
 
 ### 15. Security Constraints
 

CODE_OF_CONDUCT.md

@@ -0,0 +1,212 @@
+# Code of Conduct
+
+## Purpose
+
+**Telemt exists to solve technical problems.**
+
+Telemt is open to contributors who want to learn, improve and build meaningful systems together.
+
+It is a place for building, testing, reasoning, documenting, and improving systems.
+
+Discussions that advance this work are in scope. Discussions that divert it are not.
+
+Technology has consequences. Responsibility is inherent.
+
+> **Zweck bestimmt die Form.**
+
+> Purpose defines form.
+
+---
+
+## Principles
+
+* **Technical over emotional**
+
+  Arguments are grounded in data, logs, reproducible cases, or clear reasoning.
+
+* **Clarity over noise**
+
+  Communication is structured, concise, and relevant.
+
+* **Openness with standards**
+
+  Participation is open. The work remains disciplined.
+
+* **Independence of judgment**
+
+  Claims are evaluated on technical merit, not affiliation or posture.
+
+* **Responsibility over capability**
+
+  Capability does not justify careless use.
+
+* **Cooperation over friction**
+
+  Progress depends on coordination, mutual support, and honest review.
+
+* **Good intent, rigorous method**
+
+  Assume good intent, but require rigor.
+
+> **Aussagen gelten nach ihrer Begründung.**
+
+> Claims are weighed by evidence.
+
+---
+
+## Expected Behavior
+
+Participants are expected to:
+
+* Communicate directly and respectfully
+* Support claims with evidence
+* Stay within technical scope
+* Accept critique and provide it constructively
+* Reduce noise, duplication, and ambiguity
+* Help others reach correct and reproducible outcomes
+* Act in a way that improves the system as a whole
+
+Precision is learned.
+
+New contributors are welcome. They are expected to grow into these standards. Existing contributors are expected to make that growth possible.
+
+> **Wer behauptet, belegt.**
+
+> Whoever claims, proves.
+
+---
+
+## Unacceptable Behavior
+
+The following is not allowed:
+
+* Personal attacks, insults, harassment, or intimidation
+* Repeatedly derailing discussion away from Telemt’s purpose
+* Spam, flooding, or repeated low-quality input
+* Misinformation presented as fact
+* Attempts to degrade, destabilize, or exhaust Telemt or its participants
+* Use of Telemt or its spaces to enable harm
+
+Telemt is not a venue for disputes that displace technical work.
+Such discussions may be closed, removed, or redirected.
+
+> **Störung ist kein Beitrag.**
+
+> Disruption is not contribution.
+
+---
+
+## Security and Misuse
+
+Telemt is intended for responsible use.
+
+* Do not use it to plan, coordinate, or execute harm
+* Do not publish vulnerabilities without responsible disclosure
+* Report security issues privately where possible
+
+Security is both technical and behavioral.
+
+> **Verantwortung endet nicht am Code.**
+
+> Responsibility does not end at the code.
+
+---
+
+## 6. Openness
+
+Telemt is open to contributors of different backgrounds, experience levels, and working styles.
+
+- Standards are public, legible, and applied to the work itself.
+- Questions are welcome. Careful disagreement is welcome. Honest correction is welcome.
+- Gatekeeping by obscurity, status signaling, or hostility is not.
+
+---
+
+## Scope
+
+This Code of Conduct applies to all official spaces:
+
+* Source repositories (issues, pull requests, discussions)
+* Documentation
+* Communication channels associated with Telemt
+
+---
+
+## Maintainer Stewardship
+
+Maintainers are responsible for final decisions in matters of conduct, scope, and direction.
+
+This responsibility is stewardship: 
+- preserving continuity, 
+- protecting signal, 
+- maintaining standards, 
+- keeping Telemt workable for others.
+
+Judgment should be exercised with restraint, consistency, and institutional responsibility.
+- Not every decision requires extended debate.
+- Not every intervention requires public explanation.
+
+All decisions are expected to serve the durability, clarity, and integrity of Telemt.
+
+> **Ordnung ist Voraussetzung der Funktion.**
+
+> Order is the precondition of function.
+
+---
+
+## Enforcement
+
+Maintainers may act to preserve the integrity of Telemt, including by:
+
+* Removing content
+* Locking discussions
+* Rejecting contributions
+* Restricting or banning participants
+
+Actions are taken to maintain function, continuity, and signal quality.
+- Where possible, correction is preferred to exclusion.
+- Where necessary, exclusion is preferred to decay.
+
+---
+
+## Final
+
+Telemt is built on discipline, structure, and shared intent.
+- Signal over noise.
+- Facts over opinion.
+- Systems over rhetoric.
+
+- Work is collective.
+- Outcomes are shared.
+- Responsibility is distributed.
+
+- Precision is learned.
+- Rigor is expected.
+- Help is part of the work.
+
+> **Ordnung ist Voraussetzung der Freiheit.**
+
+- If you contribute — contribute with care.
+- If you speak — speak with substance.
+- If you engage — engage constructively.
+
+---
+
+## After All
+
+Systems outlive intentions.
+- What is built will be used.
+- What is released will propagate.
+- What is maintained will define the future state.
+
+There is no neutral infrastructure, only infrastructure shaped well or poorly.
+
+> **Jedes System trägt Verantwortung.**
+
+> Every system carries responsibility.
+
+- Stability requires discipline.
+- Freedom requires structure.
+- Trust requires honesty.
+
+In the end: the system reflects its contributors.

CONTRIBUTING.md

@@ -1,19 +1,82 @@
-# Issues - Rules
+# Issues
+## Warnung
+Before opening Issue, if it is more question than problem or bug - ask about that [in our chat](https://t.me/telemtrs)
+
 ## What it is not
 - NOT Question and Answer
 - NOT Helpdesk
 
-# Pull Requests - Rules
+***Each of your Issues triggers attempts to reproduce problems and analyze them, which are done manually by people***
+
+---
+
+# Pull Requests
+
 ## General
 - ONLY signed and verified commits
 - ONLY from your name
-- DO NOT commit with `codex` or `claude` as author/commiter
+- DO NOT commit with `codex`, `claude`, or other AI tools as author/committer
 - PREFER `flow` branch for development, not `main`
 
-## AI
-We are not against modern tools, like AI, where you act as a principal or architect, but we consider it important:
+---
 
-- you really understand what you're doing
-- you understand the relationships and dependencies of the components being modified
-- you understand the architecture of Telegram MTProto, MTProxy, Middle-End KDF at least generically
-- you DO NOT commit for the sake of commits, but to help the community, core-developers and ordinary users
+## Definition of Ready (MANDATORY)
+
+A Pull Request WILL be ignored or closed if:
+
+- it does NOT build
+- it does NOT pass tests
+- it does NOT follow formatting rules
+- it contains unrelated or excessive changes
+- the author cannot clearly explain the change
+
+---
+
+## Blessed Principles
+- PR must build
+- PR must pass tests
+- PR must be understood by author
+
+---
+
+## AI Usage Policy
+
+AI tools (Claude, ChatGPT, Codex, DeepSeek, etc.) are allowed as **assistants**, NOT as decision-makers.
+
+By submitting a PR, you confirm that:
+
+- you fully understand the code you submit
+- you verified correctness manually
+- you reviewed architecture and dependencies
+- you take full responsibility for the change
+
+AI-generated code is treated as **draft** and must be validated like any other external contribution.
+
+PRs that look like unverified AI dumps WILL be closed
+
+---
+
+## Maintainer Policy
+
+Maintainers reserve the right to:
+
+- close PRs that do not meet basic quality requirements
+- request explanations before review
+- ignore low-effort contributions
+
+Respect the reviewers time
+
+---
+
+## Enforcement
+
+Pull Requests that violate project standards may be closed without review.
+
+This includes (but is not limited to):
+
+- non-building code
+- failing tests
+- unverified or low-effort changes
+- inability to explain the change
+
+These actions follow the Code of Conduct and are intended to preserve signal, quality, and Telemt's integrity

Cargo.toml

@@ -1,8 +1,11 @@
 [package]
 name = "telemt"
-version = "3.3.1"
+version = "3.3.39"
 edition = "2024"
 
+[features]
+redteam_offline_expected_fail = []
+
 [dependencies]
 # C
 libc = "0.2"
@@ -22,26 +25,37 @@ hmac = "0.12"
 crc32fast = "1.4"
 crc32c = "0.6"
 zeroize = { version = "1.8", features = ["derive"] }
+subtle = "2.6"
+static_assertions = "1.1"
 
 # Network
-socket2 = { version = "0.5", features = ["all"] }
-nix = { version = "0.28", default-features = false, features = ["net"] }
+socket2 = { version = "0.6", features = ["all"] }
+nix = { version = "0.31", default-features = false, features = [
+  "net",
+  "user",
+  "process",
+  "fs",
+  "signal",
+] }
+shadowsocks = { version = "1.24", features = ["aead-cipher-2022"] }
 
 # Serialization
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1.0"
-toml = "0.8"
-x509-parser = "0.15"
+toml = "1.0"
+x509-parser = "0.18"
 
 # Utils
 bytes = "1.9"
 thiserror = "2.0"
 tracing = "0.1"
 tracing-subscriber = { version = "0.3", features = ["env-filter"] }
+tracing-appender = "0.2"
 parking_lot = "0.12"
-dashmap = "5.5"
+dashmap = "6.1"
+arc-swap = "1.7"
 lru = "0.16"
-rand = "0.9"
+rand = "0.10"
 chrono = { version = "0.4", features = ["serde"] }
 hex = "0.4"
 base64 = "0.22"
@@ -50,26 +64,38 @@ regex = "1.11"
 crossbeam-queue = "0.3"
 num-bigint = "0.4"
 num-traits = "0.2"
+x25519-dalek = "2"
 anyhow = "1.0"
 
 # HTTP
-reqwest = { version = "0.12", features = ["rustls-tls"], default-features = false }
-notify = { version = "6", features = ["macos_fsevent"] }
-ipnetwork = "0.20"
+reqwest = { version = "0.13", features = ["rustls"], default-features = false }
+notify = "8.2"
+ipnetwork = { version = "0.21", features = ["serde"] }
 hyper = { version = "1", features = ["server", "http1"] }
 hyper-util = { version = "0.1", features = ["tokio", "server-auto"] }
 http-body-util = "0.1"
 httpdate = "1.0"
-tokio-rustls = { version = "0.26", default-features = false, features = ["tls12"] }
-rustls = { version = "0.23", default-features = false, features = ["std", "tls12", "ring"] }
-webpki-roots = "0.26"
+tokio-rustls = { version = "0.26", default-features = false, features = [
+  "tls12",
+] }
+rustls = { version = "0.23", default-features = false, features = [
+  "std",
+  "tls12",
+  "ring",
+] }
+webpki-roots = "1.0"
 
 [dev-dependencies]
 tokio-test = "0.4"
-criterion = "0.5"
+criterion = "0.8"
 proptest = "1.4"
 futures = "0.3"
 
 [[bench]]
 name = "crypto_bench"
 harness = false
+
+[profile.release]
+lto = "fat"
+codegen-units = 1
+

Dockerfile

@@ -1,43 +1,98 @@
-# ==========================
-# Stage 1: Build
-# ==========================
-FROM rust:1.88-slim-bookworm AS builder
+# syntax=docker/dockerfile:1
 
-RUN apt-get update && apt-get install -y --no-install-recommends \
-    pkg-config \
-    && rm -rf /var/lib/apt/lists/*
-
-WORKDIR /build
-
-COPY Cargo.toml Cargo.lock* ./
-RUN mkdir src && echo 'fn main() {}' > src/main.rs && \
-    cargo build --release 2>/dev/null || true && \
-    rm -rf src
-
-COPY . .
-RUN cargo build --release && strip target/release/telemt
+ARG TELEMT_REPOSITORY=telemt/telemt
+ARG TELEMT_VERSION=latest
 
 # ==========================
-# Stage 2: Runtime
+# Minimal Image
 # ==========================
-FROM debian:bookworm-slim
+FROM debian:12-slim AS minimal
 
-RUN apt-get update && apt-get install -y --no-install-recommends \
+ARG TARGETARCH
+ARG TELEMT_REPOSITORY
+ARG TELEMT_VERSION
+
+RUN set -eux; \
+    apt-get update; \
+    apt-get install -y --no-install-recommends \
+        binutils \
         ca-certificates \
-    && rm -rf /var/lib/apt/lists/*
+        curl \
+        tar; \
+    rm -rf /var/lib/apt/lists/*
 
-RUN useradd -r -s /usr/sbin/nologin telemt
+RUN set -eux; \
+    case "${TARGETARCH}" in \
+        amd64) ASSET="telemt-x86_64-linux-musl.tar.gz" ;; \
+        arm64) ASSET="telemt-aarch64-linux-musl.tar.gz" ;; \
+        *) echo "Unsupported TARGETARCH: ${TARGETARCH}" >&2; exit 1 ;; \
+    esac; \
+    VERSION="${TELEMT_VERSION#refs/tags/}"; \
+    if [ -z "${VERSION}" ] || [ "${VERSION}" = "latest" ]; then \
+        BASE_URL="https://github.com/${TELEMT_REPOSITORY}/releases/latest/download"; \
+    else \
+        BASE_URL="https://github.com/${TELEMT_REPOSITORY}/releases/download/${VERSION}"; \
+    fi; \
+    curl -fL \
+        --retry 5 \
+        --retry-delay 3 \
+        --connect-timeout 10 \
+        --max-time 120 \
+        -o "/tmp/${ASSET}" \
+        "${BASE_URL}/${ASSET}"; \
+    curl -fL \
+        --retry 5 \
+        --retry-delay 3 \
+        --connect-timeout 10 \
+        --max-time 120 \
+        -o "/tmp/${ASSET}.sha256" \
+        "${BASE_URL}/${ASSET}.sha256"; \
+    cd /tmp; \
+    sha256sum -c "${ASSET}.sha256"; \
+    tar -xzf "${ASSET}" -C /tmp; \
+    test -f /tmp/telemt; \
+    install -m 0755 /tmp/telemt /telemt; \
+    strip --strip-unneeded /telemt || true; \
+    rm -f "/tmp/${ASSET}" "/tmp/${ASSET}.sha256" /tmp/telemt
+
+# ==========================
+# Debug Image
+# ==========================
+FROM debian:12-slim AS debug
+
+RUN set -eux; \
+    apt-get update; \
+    apt-get install -y --no-install-recommends \
+        ca-certificates \
+        tzdata \
+        curl \
+        iproute2 \
+        busybox; \
+    rm -rf /var/lib/apt/lists/*
 
 WORKDIR /app
 
-COPY --from=builder /build/target/release/telemt /app/telemt
+COPY --from=minimal /telemt /app/telemt
 COPY config.toml /app/config.toml
 
-RUN chown -R telemt:telemt /app
-USER telemt
-
-EXPOSE 443
-EXPOSE 9090
+EXPOSE 443 9090 9091
+
+ENTRYPOINT ["/app/telemt"]
+CMD ["config.toml"]
+
+# ==========================
+# Production Distroless on MUSL
+# ==========================
+FROM gcr.io/distroless/static-debian12 AS prod
+
+WORKDIR /app
+
+COPY --from=minimal /telemt /app/telemt
+COPY config.toml /app/config.toml
+
+USER nonroot:nonroot
+
+EXPOSE 443 9090 9091
 
 ENTRYPOINT ["/app/telemt"]
 CMD ["config.toml"]

LICENSE

@@ -0,0 +1,169 @@
+######## TELEMT LICENSE 3.3 #########
+##### Copyright (c) 2026 Telemt #####
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this Software and associated documentation files (the "Software"),
+to use, reproduce, modify, prepare derivative works of, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to permit
+persons to whom the Software is furnished to do so, provided that all
+copyright notices, license terms, and conditions set forth in this License
+are preserved and complied with.
+
+### Official Translations
+
+The canonical version of this License is the English version.
+Official translations are provided for informational purposes only
+and for convenience, and do not have legal force. In case of any
+discrepancy, the English version of this License shall prevail
+
+/----------------------------------------------------------\
+| Language    | Location                                   |
+|-------------|--------------------------------------------|
+| English     | docs/LICENSE/TELEMT-LICENSE.en.md          |
+| German      | docs/LICENSE/TELEMT-LICENSE.de.md          |
+| Russian     | docs/LICENSE/TELEMT-LICENSE.ru.md          |
+\----------------------------------------------------------/
+
+### License Versioning Policy
+
+This License is version 3 of the TELEMT Public License.
+Each version of the Software is licensed under the License that
+accompanies its corresponding source code distribution.
+
+Future versions of the Software may be distributed under a different
+version of the TELEMT Public License or under a different license,
+as determined by the Telemt maintainers.
+
+Any such change of license applies only to the versions of the
+Software distributed with the new license and SHALL NOT retroactively
+affect any previously released versions of the Software.
+
+Recipients of the Software are granted rights only under the License
+provided with the version of the Software they received.
+
+Redistributions of the Software, including Modified Versions, MUST
+preserve the copyright notices, license text, and conditions of this
+License for all portions of the Software derived from Telemt.
+
+Additional terms or licenses may be applied to modifications or
+additional code added by a redistributor, provided that such terms
+do not restrict or alter the rights granted under this License for
+the original Telemt Software.
+
+Nothing in this section limits the rights granted under this License
+for versions of the Software already released.
+
+### Definitions
+
+For the purposes of this License:
+- "Software" means the Telemt software, including source code, documentation,
+and any associated files distributed under this License.
+- "Contributor" means any person or entity that submits code, patches,
+documentation, or other contributions to the Software that are accepted
+into the Software by the maintainers.
+- "Contribution" means any work of authorship intentionally submitted
+to the Software for inclusion in the Software.
+- "Modified Version" means any version of the Software that has been
+changed, adapted, extended, or otherwise modified from the original
+Software.
+- "Maintainers" means the individuals or entities responsible for
+the official Telemt project and its releases.
+
+#### 1 Attribution
+
+Redistributions of the Software, in source or binary form, MUST RETAIN the
+above copyright notice, this license text, and any existing attribution
+notices.
+
+#### 2 Modification Notice
+
+If you modify the Software, you MUST clearly state that the Software has been
+modified and include a brief description of the changes made.
+
+Modified versions MUST NOT be presented as the original Telemt.
+
+#### 3 Trademark and Branding
+
+This license DOES NOT grant permission to use the name "Telemt", 
+the Telemt logo, or any Telemt trademarks or branding.
+
+Redistributed or modified versions of the Software MAY NOT use the Telemt
+name in a way that suggests endorsement or official origin without explicit
+permission from the Telemt maintainers.
+
+Use of the name "Telemt" to describe a modified version of the Software
+is permitted only if the modified version is clearly identified as a
+modified or unofficial version.
+
+Any distribution that could reasonably confuse users into believing that
+the software is an official Telemt release is prohibited.
+
+#### 4 Binary Distribution Transparency
+
+If you distribute compiled binaries of the Software,
+you are ENCOURAGED to provide access to the corresponding
+source code and build instructions where reasonably possible.
+
+This helps preserve transparency and allows recipients to verify the
+integrity and reproducibility of distributed builds.
+
+#### 5 Patent Grant and Defensive Termination Clause
+
+Each contributor grants you a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable patent license to make, have made,
+use, offer to sell, sell, import, and otherwise transfer the Software.
+
+This patent license applies only to those patent claims necessarily
+infringed by the contributor’s contribution alone or by combination of
+their contribution with the Software.
+
+If you initiate or participate in any patent litigation, including
+cross-claims or counterclaims, alleging that the Software or any
+contribution incorporated within the Software constitutes patent
+infringement, then **all rights granted to you under this license shall
+terminate immediately** as of the date such litigation is filed.
+
+Additionally, if you initiate legal action alleging that the
+Software itself infringes your patent or other intellectual
+property rights, then all rights granted to you under this
+license SHALL TERMINATE automatically.
+
+#### 6 Contributions
+
+Unless you explicitly state otherwise, any Contribution intentionally
+submitted for inclusion in the Software shall be licensed under the terms
+of this License.
+
+By submitting a Contribution, you grant the Telemt maintainers and all
+recipients of the Software the rights described in this License with
+respect to that Contribution.
+
+#### 7 Network Use Attribution
+
+If the Software is used to provide a publicly accessible network service,
+the operator of such service SHOULD provide attribution to Telemt in at least
+one of the following locations:
+
+- service documentation
+- service description
+- an "About" or similar informational page
+- other user-visible materials reasonably associated with the service
+
+Such attribution MUST NOT imply endorsement by the Telemt project or its
+maintainers.
+
+#### 8 Disclaimer of Warranty and Severability Clause
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE
+
+IF ANY PROVISION OF THIS LICENSE IS HELD TO BE INVALID OR UNENFORCEABLE,
+SUCH PROVISION SHALL BE INTERPRETED TO REFLECT THE ORIGINAL INTENT
+OF THE PARTIES AS CLOSELY AS POSSIBLE, AND THE REMAINING PROVISIONS
+SHALL REMAIN IN FULL FORCE AND EFFECT

LICENSING.md

@@ -1,17 +1,12 @@
 # LICENSING
 ## Licenses for Versions
-| Version | License       |
-|---------|---------------|
-| 1.0     | NO LICNESE    |
-| 1.1     | NO LICENSE    |
-| 1.2     | NO LICENSE    |
-| 2.0     | NO LICENSE    |
-| 3.0     | TELEMT UL 1   |
+| Version ≥ | Version ≤ | License       |
+|-----------|-----------|---------------|
+| 1.0       | 3.3.17    | NO LICNESE    |
+| 3.3.18    | 3.4.0     | TELEMT PL 3   |
 
 ### License Types
 - **NO LICENSE** = ***ALL RIGHT RESERVED***
-- **TELEMT UL1** - work in progress license for source code of `telemt`, which encourages:
-  - fair use, 
-  - contributions, 
-  - distribution, 
-  - but prohibits NOT mentioning the authors
+- **TELEMT PL** - special Telemt Public License based on Apache License 2 principles
+
+## [Telemt Public License 3](https://github.com/telemt/telemt/blob/main/LICENSE)

README.md

@@ -2,300 +2,60 @@
 
 ***Löst Probleme, bevor andere überhaupt wissen, dass sie existieren*** / ***It solves problems before others even realize they exist***
 
+> [!NOTE]
+>
+> Fixed TLS ClientHello is now available:
+> - in **Telegram Desktop** starting from version **6.7.2**
+> - in **Telegram Android Client** starting from version **12.6.4**
+> - **release for iOS is "work in progress"**
+>
+> To work with EE-MTProxy, please update your client!
+
+<p align="center">
+  <a href="https://t.me/telemtrs">
+    <img src="docs/assets/telegram_button.png" alt="Join us in Telegram" width="200" />
+  </a>
+</p>
+
 **Telemt** is a fast, secure, and feature-rich server written in Rust: it fully implements the official Telegram proxy algo and adds many production-ready improvements such as:
-- ME Pool + Reader/Writer + Registry + Refill + Adaptive Floor + Trio-State + Generation Lifecycle
-- [Full-covered API w/ management](https://github.com/telemt/telemt/blob/main/docs/API.md)
-- Anti-Replay on Sliding Window
-- Prometheus-format Metrics
-- TLS-Fronting and TCP-Splicing for masking from "prying" eyes
+- [ME Pool + Reader/Writer + Registry + Refill + Adaptive Floor + Trio-State + Generation Lifecycle](https://github.com/telemt/telemt/blob/main/docs/Architecture/Model/MODEL.en.md);
+- [Full-covered API w/ management](https://github.com/telemt/telemt/blob/main/docs/Architecture/API/API.md);
+- Anti-Replay on Sliding Window;
+- Prometheus-format Metrics;
+- TLS-Fronting and TCP-Splicing for masking from "prying" eyes.
 
-[**Telemt Chat in Telegram**](https://t.me/telemtrs)
-
-## NEWS and EMERGENCY
-### ✈️ Telemt 3 is released!
-<table>
-<tr>
-<td width="50%" valign="top">
-
-### 🇷🇺 RU
-
-#### Релиз 3.0.15 — 25 февраля
-
-25 февраля мы выпустили версию **3.0.15**
-
-Мы предполагаем, что она станет завершающей версией поколения 3.0 и уже сейчас мы рассматриваем её как **LTS-кандидата** для версии **3.1.0**!
-
-После нескольких дней детального анализа особенностей работы Middle-End мы спроектировали и реализовали продуманный режим **ротации ME Writer**. Данный режим позволяет поддерживать стабильно высокую производительность в long-run сценариях без возникновения ошибок, связанных с некорректной конфигурацией прокси
-
-Будем рады вашему фидбеку и предложениям по улучшению — особенно в части **статистики** и **UX**
-
-Релиз:  
-[3.0.15](https://github.com/telemt/telemt/releases/tag/3.0.15)
-
----
-
-Если у вас есть компетенции в:
-
-- Асинхронных сетевых приложениях  
-- Анализе трафика  
-- Реверс-инжиниринге  
-- Сетевых расследованиях  
-
-Мы открыты к архитектурным предложениям, идеям и pull requests
-</td>
-<td width="50%" valign="top">
-
-### 🇬🇧 EN
-
-#### Release 3.0.15 — February 25
-
-On February 25, we released version **3.0.15**
-
-We expect this to become the final release of the 3.0 generation and at this point, we already see it as a strong **LTS candidate** for the upcoming **3.1.0** release!
-
-After several days of deep analysis of Middle-End behavior, we designed and implemented a well-engineered **ME Writer rotation mode**. This mode enables sustained high throughput in long-run scenarios while preventing proxy misconfiguration errors
-
-We are looking forward to your feedback and improvement proposals — especially regarding **statistics** and **UX**
-
-Release:  
-[3.0.15](https://github.com/telemt/telemt/releases/tag/3.0.15)
-
----
-
-If you have expertise in:
-
-- Asynchronous network applications  
-- Traffic analysis  
-- Reverse engineering  
-- Network forensics  
-
-We welcome ideas, architectural feedback, and pull requests.
-</td>
-</tr>
-</table>
-
-# Features
-💥 The configuration structure has changed since version 1.1.0.0. change it in your environment!
+![telemt_scheme](docs/assets/telemt.png)
 
 ⚓ Our implementation of **TLS-fronting** is one of the most deeply debugged, focused, advanced and *almost* **"behaviorally consistent to real"**:  we are confident we have it right - [see evidence on our validation and traces](#recognizability-for-dpi-and-crawler)
 
 ⚓ Our ***Middle-End Pool*** is fastest by design in standard scenarios, compared to other implementations of connecting to the Middle-End Proxy: non dramatically, but usual
 
+- Full support for all official MTProto proxy modes:
+  - Classic;
+  - Secure - with `dd` prefix;
+  - Fake TLS - with `ee` prefix + SNI fronting;
+- Replay attack protection;
+- Optional traffic masking: forward unrecognized connections to a real web server, e.g. GitHub 🤪;
+- Configurable keepalives + timeouts + IPv6 and "Fast Mode";
+- Graceful shutdown on Ctrl+C;
+- Extensive logging via `trace` and `debug` with `RUST_LOG` method.
+
 # GOTO
-- [Features](#features)
-- [Quick Start Guide](#quick-start-guide)
-- [How to use?](#how-to-use)
-  - [Systemd Method](#telemt-via-systemd)
-- [Configuration](#configuration)
-  - [Minimal Configuration](#minimal-configuration-for-first-start)
-  - [Advanced](#advanced)
-    - [Adtag](#adtag)
-    - [Listening and Announce IPs](#listening-and-announce-ips)
-    - [Upstream Manager](#upstream-manager)
-      - [IP](#bind-on-ip)
-      - [SOCKS](#socks45-as-upstream)
 - [FAQ](#faq)
-  - [Recognizability for DPI + crawler](#recognizability-for-dpi-and-crawler)
-  - [Telegram Calls](#telegram-calls-via-mtproxy)
-  - [DPI](#how-does-dpi-see-mtproxy-tls)
-  - [Whitelist on Network Level](#whitelist-on-ip)
-  - [Too many open files](#too-many-open-files)
+- [Architecture](docs/Architecture)
+- [Quick Start Guide](#quick-start-guide)
+- [Config parameters](docs/Config_params)
 - [Build](#build)
-- [Docker](#docker)
 - [Why Rust?](#why-rust)
 
-## Features
-
-- Full support for all official MTProto proxy modes:
-  - Classic
-  - Secure - with `dd` prefix
-  - Fake TLS - with `ee` prefix + SNI fronting
-- Replay attack protection
-- Optional traffic masking: forward unrecognized connections to a real web server, e.g. GitHub 🤪
-- Configurable keepalives + timeouts + IPv6 and "Fast Mode"
-- Graceful shutdown on Ctrl+C
-- Extensive logging via `trace` and `debug` with `RUST_LOG` method
-
 ## Quick Start Guide
-
-### [Quick Start Guide RU](docs/QUICK_START_GUIDE.ru.md)  
-### [Quick Start Guide EN](docs/QUICK_START_GUIDE.en.md)
-
-
-### Advanced
-#### Adtag (per-user)
-To use channel advertising and usage statistics from Telegram, get an Adtag from [@mtproxybot](https://t.me/mtproxybot). Set it per user in `[access.user_ad_tags]` (32 hex chars):
-```toml
-[access.user_ad_tags]
-username1 = "11111111111111111111111111111111"  # Replace with your tag from @mtproxybot
-username2 = "22222222222222222222222222222222"
-```
-#### Listening and Announce IPs
-To specify listening address and/or address in links, add to section `[[server.listeners]]` of config.toml:
-```toml
-[[server.listeners]]
-ip = "0.0.0.0"          # 0.0.0.0 = all IPs; your IP = specific listening
-announce_ip = "1.2.3.4" # IP in links; comment with # if not used
-```
-#### Upstream Manager
-To specify upstream, add to section `[[upstreams]]` of config.toml:
-##### Bind on IP
-```toml
-[[upstreams]]
-type = "direct"
-weight = 1
-enabled = true
-interface = "192.168.1.100" # Change to your outgoing IP
-```
-##### SOCKS4/5 as Upstream
-- Without Auth:
-```toml
-[[upstreams]]
-type = "socks5"            # Specify SOCKS4 or SOCKS5
-address = "1.2.3.4:1234"   # SOCKS-server Address
-weight = 1                 # Set Weight for Scenarios
-enabled = true
-```
-
-- With Auth:
-```toml
-[[upstreams]]
-type = "socks5"            # Specify SOCKS4 or SOCKS5
-address = "1.2.3.4:1234"   # SOCKS-server Address
-username = "user"          # Username for Auth on SOCKS-server
-password = "pass"          # Password for Auth on SOCKS-server
-weight = 1                 # Set Weight for Scenarios
-enabled = true
-```
+- [Quick Start Guide RU](docs/Quick_start/QUICK_START_GUIDE.ru.md)
+- [Quick Start Guide EN](docs/Quick_start/QUICK_START_GUIDE.en.md)
 
 ## FAQ
-### Recognizability for DPI and crawler
-Since version 1.1.0.0, we have debugged masking perfectly: for all clients without "presenting" a key, 
-we transparently direct traffic to the target host!
-
-- We consider this a breakthrough aspect, which has no stable analogues today
-- Based on this: if `telemt` configured correctly, **TLS mode is completely identical to real-life handshake + communication** with a specified host
-- Here is our evidence:
-    - 212.220.88.77 - "dummy" host, running `telemt`
-    - `petrovich.ru` - `tls` + `masking` host, in HEX: `706574726f766963682e7275`
-    - **No MITM + No Fake Certificates/Crypto** = pure transparent *TCP Splice* to "best" upstream: MTProxy or tls/mask-host:
-      - DPI see legitimate HTTPS to `tls_host`, including *valid chain-of-trust* and entropy
-      - Crawlers completely satisfied receiving responses from `mask_host`
-  #### Client WITH secret-key accesses the MTProxy resource:
-  
-  <img width="360" height="439" alt="telemt" src="https://github.com/user-attachments/assets/39352afb-4a11-4ecc-9d91-9e8cfb20607d" />
-  
-  #### Client WITHOUT secret-key gets transparent access to the specified resource:
-    - with trusted certificate
-    - with original handshake
-    - with full request-response way
-    - with low-latency overhead
-```bash
-root@debian:~/telemt# curl -v -I --resolve petrovich.ru:443:212.220.88.77 https://petrovich.ru/
-* Added petrovich.ru:443:212.220.88.77 to DNS cache
-* Hostname petrovich.ru was found in DNS cache
-*   Trying 212.220.88.77:443...
-* Connected to petrovich.ru (212.220.88.77) port 443 (#0)
-* ALPN: offers h2,http/1.1
-* TLSv1.3 (OUT), TLS handshake, Client hello (1):
-*  CAfile: /etc/ssl/certs/ca-certificates.crt
-*  CApath: /etc/ssl/certs
-* TLSv1.3 (IN), TLS handshake, Server hello (2):
-* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
-* TLSv1.3 (IN), TLS handshake, Certificate (11):
-* TLSv1.3 (IN), TLS handshake, CERT verify (15):
-* TLSv1.3 (IN), TLS handshake, Finished (20):
-* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
-* TLSv1.3 (OUT), TLS handshake, Finished (20):
-* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384
-* ALPN: server did not agree on a protocol. Uses default.
-* Server certificate:
-*  subject: C=RU; ST=Saint Petersburg; L=Saint Petersburg; O=STD Petrovich; CN=*.petrovich.ru
-*  start date: Jan 28 11:21:01 2025 GMT
-*  expire date: Mar  1 11:21:00 2026 GMT
-*  subjectAltName: host "petrovich.ru" matched cert's "petrovich.ru"
-*  issuer: C=BE; O=GlobalSign nv-sa; CN=GlobalSign RSA OV SSL CA 2018
-*  SSL certificate verify ok.
-* using HTTP/1.x
-> HEAD / HTTP/1.1
-> Host: petrovich.ru
-> User-Agent: curl/7.88.1
-> Accept: */*
-> 
-* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
-* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
-* old SSL session ID is stale, removing
-< HTTP/1.1 200 OK
-HTTP/1.1 200 OK
-< Server: Variti/0.9.3a
-Server: Variti/0.9.3a
-< Date: Thu, 01 Jan 2026 00:0000 GMT
-Date: Thu, 01 Jan 2026 00:0000 GMT
-< Access-Control-Allow-Origin: *
-Access-Control-Allow-Origin: *
-< Content-Type: text/html
-Content-Type: text/html
-< Cache-Control: no-store
-Cache-Control: no-store
-< Expires: Thu, 01 Jan 2026 00:0000 GMT
-Expires: Thu, 01 Jan 2026 00:0000 GMT
-< Pragma: no-cache
-Pragma: no-cache
-< Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
-Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
-< Content-Type: text/html
-Content-Type: text/html
-< Content-Length: 31253
-Content-Length: 31253
-< Connection: keep-alive
-Connection: keep-alive
-< Keep-Alive: timeout=60
-Keep-Alive: timeout=60
-
-< 
-* Connection #0 to host petrovich.ru left intact
-
-```
-- We challenged ourselves, we kept trying and we didn't only *beat the air*: now, we have something to show you
-  - Do not just take our word for it? - This is great and we respect that: you can build your own `telemt` or download a build and check it right now
-### Telegram Calls via MTProxy
-- Telegram architecture **does NOT allow calls via MTProxy**, but only via SOCKS5, which cannot be obfuscated
-### How does DPI see MTProxy TLS?
-- DPI sees MTProxy in Fake TLS (ee) mode as TLS 1.3
-- the SNI you specify sends both the client and the server;
-- ALPN is similar to HTTP 1.1/2;
-- high entropy, which is normal for AES-encrypted traffic;
-### Whitelist on IP
-- MTProxy cannot work when there is: 
-  - no IP connectivity to the target host: Russian Whitelist on Mobile Networks - "Белый список"
-  - OR all TCP traffic is blocked
-  - OR high entropy/encrypted traffic is blocked: content filters at universities and critical infrastructure
-  - OR all TLS traffic is blocked
-  - OR specified port is blocked: use 443 to make it "like real"
-  - OR provided SNI is blocked: use "officially approved"/innocuous name
-- like most protocols on the Internet; 
-- these situations are observed:
-  - in China behind the Great Firewall
-  - in Russia on mobile networks, less in wired networks
-  - in Iran during "activity"
-### Too many open files
-- On a fresh Linux install the default open file limit is low; under load `telemt` may fail with `Accept error: Too many open files`
-- **Systemd**: add `LimitNOFILE=65536` to the `[Service]` section (already included in the example above)
-- **Docker**: add `--ulimit nofile=65536:65536` to your `docker run` command, or in `docker-compose.yml`:
-```yaml
-ulimits:
-  nofile:
-    soft: 65536
-    hard: 65536
-```
-- **System-wide** (optional): add to `/etc/security/limits.conf`:
-```
-*       soft    nofile  1048576
-*       hard    nofile  1048576
-root    soft    nofile  1048576
-root    hard    nofile  1048576
-```
 
+- [FAQ RU](docs/FAQ.ru.md)
+- [FAQ EN](docs/FAQ.en.md)
 
 ## Build
 ```bash
@@ -305,6 +65,11 @@ git clone https://github.com/telemt/telemt
 cd telemt
 # Starting Release Build
 cargo build --release
+
+# Low-RAM devices (1 GB, e.g. NanoPi Neo3 / Raspberry Pi Zero 2):
+# release profile uses lto = "thin" to reduce peak linker memory.
+# If your custom toolchain overrides profiles, avoid enabling fat LTO.
+
 # Move to /bin
 mv ./target/release/telemt /bin
 # Make executable
@@ -313,40 +78,11 @@ chmod +x /bin/telemt
 telemt config.toml
 ```
 
-## Docker
-**Quick start (Docker Compose)**
+### OpenBSD
+- Build and service setup guide: [OpenBSD Guide (EN)](docs/Quick_start/OPENBSD_QUICK_START_GUIDE.en.md)
+- Example rc.d script: [contrib/openbsd/telemt.rcd](contrib/openbsd/telemt.rcd)
+- Status: OpenBSD sandbox hardening with `pledge(2)` and `unveil(2)` is not implemented yet.
 
-1. Edit `config.toml` in repo root (at least: port, users secrets, tls_domain)
-2. Start container:
-```bash
-docker compose up -d --build
-```
-3. Check logs:
-```bash
-docker compose logs -f telemt
-```
-4. Stop:
-```bash
-docker compose down
-```
-
-**Notes**
-- `docker-compose.yml` maps `./config.toml` to `/app/config.toml` (read-only)
-- By default it publishes `443:443` and runs with dropped capabilities (only `NET_BIND_SERVICE` is added)
-- If you really need host networking (usually only for some IPv6 setups) uncomment `network_mode: host`
-
-**Run without Compose**
-```bash
-docker build -t telemt:local .
-docker run --name telemt --restart unless-stopped \
-  -p 443:443 \
-  -e RUST_LOG=info \
-  -v "$PWD/config.toml:/app/config.toml:ro" \
-  --read-only \
-  --cap-drop ALL --cap-add NET_BIND_SERVICE \
-  --ulimit nofile=65536:65536 \
-  telemt:local
-```
 
 ## Why Rust?
 - Long-running reliability and idempotent behavior
@@ -354,24 +90,3 @@ docker run --name telemt --restart unless-stopped \
 - No garbage collector
 - Memory safety and reduced attack surface
 - Tokio's asynchronous architecture
-
-## Issues
-- ✅ [SOCKS5 as Upstream](https://github.com/telemt/telemt/issues/1) -> added Upstream Management
-- ✅ [iOS - Media Upload Hanging-in-Loop](https://github.com/telemt/telemt/issues/2)
-
-## Roadmap
-- Public IP in links
-- Config Reload-on-fly
-- Bind to device or IP for outbound/inbound connections
-- Adtag Support per SNI / Secret
-- Fail-fast on start + Fail-soft on runtime (only WARN/ERROR)
-- Zero-copy, minimal allocs on hotpath
-- DC Healthchecks + global fallback
-- No global mutable state
-- Client isolation + Fair Bandwidth
-- Backpressure-aware IO
-- "Secret Policy" - SNI / Secret Routing :D
-- Multi-upstream Balancer and Failover
-- Strict FSM per handshake
-- Session-based Antireplay with Sliding window, non-broking reconnects
-- Web Control: statistic, state of health, latency, client experience...

README.ru.md

@@ -0,0 +1,123 @@
+# Telemt — MTProxy на Rust + Tokio
+
+***Решает проблемы раньше, чем другие узнают об их существовании***
+
+> [!Примечание]
+>
+> Исправленный TLS ClientHello доступен в **Telegram Desktop** начиная с версии **6.7.2**: для работы с EE-MTProxy обновите клиент.
+>
+> Исправленный TLS ClientHello доступен в **Telegram Android** начиная с версии **12.6.4**; **официальный релиз для iOS находится в процессе разработки**.
+
+<p align="center">
+  <a href="https://t.me/telemtrs">
+    <img src="docs/assets/telegram_button.png" alt="Мы в Telegram" width="200" />
+  </a>
+</p>
+
+**Telemt** — это быстрый, безопасный и функциональный сервер, написанный на Rust. Он полностью реализует официальный алгоритм прокси Telegram и добавляет множество улучшений для продакшена:
+
+- [ME Pool + Reader/Writer + Registry + Refill + Adaptive Floor + Trio-State + жизненный цикл генераций](https://github.com/telemt/telemt/blob/main/docs/model/MODEL.en.md);
+- [Полноценный API с управлением](https://github.com/telemt/telemt/blob/main/docs/API.md);
+- Защита от повторных атак (Anti-Replay on Sliding Window);
+- Метрики в формате Prometheus;
+- TLS-fronting и TCP-splicing для маскировки от DPI.
+
+![telemt_scheme](docs/assets/telemt.png)
+
+## Особенности
+
+⚓ Реализация **TLS-fronting** максимально приближена к поведению реального HTTPS-трафика.
+
+⚓ ***Middle-End Pool*** оптимизирован для высокой производительности.
+
+- Поддержка всех режимов MTProto proxy:
+  - Classic;
+  - Secure (префикс `dd`);
+  - Fake TLS (префикс `ee` + SNI fronting);
+- Защита от replay-атак;
+- Маскировка трафика (перенаправление неизвестных подключений на реальные сайты);
+- Настраиваемые keepalive, таймауты, IPv6 и «быстрый режим»;
+- Корректное завершение работы (Ctrl+C);
+- Подробное логирование через `trace` и `debug`.
+
+# Навигация
+- [FAQ](#faq)
+- [Архитектура](docs/Architecture)
+- [Быстрый старт](#quick-start-guide)
+- [Параметры конфигурационного файла](docs/Config_params)
+- [Сборка](#build)
+- [Почему Rust?](#why-rust)
+- [Известные проблемы](#issues)
+- [Планы](#roadmap)
+
+## Быстрый старт
+- [Quick Start Guide RU](docs/Quick_start/QUICK_START_GUIDE.ru.md)
+- [Quick Start Guide EN](docs/Quick_start/QUICK_START_GUIDE.en.md)
+
+## FAQ
+
+- [FAQ RU](docs/FAQ.ru.md)
+- [FAQ EN](docs/FAQ.en.md)
+
+## Сборка
+
+```bash
+# Клонируйте репозиторий
+git clone https://github.com/telemt/telemt 
+# Смените каталог на telemt
+cd telemt
+# Начните процесс сборки
+cargo build --release
+
+# Устройства с небольшим объёмом оперативной памяти (1 ГБ, например NanoPi Neo3 / Raspberry Pi Zero 2):
+# используется параметр lto = «thin» для уменьшения пикового потребления памяти.
+# Если ваш пользовательский набор инструментов переопределяет профили, не используйте Fat LTO.
+
+# Перейдите в каталог /bin
+mv ./target/release/telemt /bin
+# Сделайте файл исполняемым
+chmod +x /bin/telemt
+# Запустите!
+telemt config.toml
+```
+
+### Устройства с малым объемом RAM
+Для устройств с ~1 ГБ RAM (например Raspberry Pi):
+- используется облегчённая оптимизация линковщика (thin LTO);
+- не рекомендуется включать fat LTO.
+
+## OpenBSD
+
+- Руководство по сборке и настройке на английском языке [OpenBSD Guide (EN)](docs/Quick_start/OPENBSD_QUICK_START_GUIDE.en.md);
+- Пример rc.d скрипта: [contrib/openbsd/telemt.rcd](contrib/openbsd/telemt.rcd);
+- Поддержка sandbox с `pledge(2)` и `unveil(2)` пока не реализована.
+
+## Почему Rust?
+
+- Надёжность для долгоживущих процессов;
+- Детерминированное управление ресурсами (RAII);
+- Отсутствие сборщика мусора;
+- Безопасность памяти;
+- Асинхронная архитектура Tokio.
+
+## Известные проблемы
+
+- ✅ [Поддержка SOCKS5 как upstream](https://github.com/telemt/telemt/issues/1) -> добавлен Upstream Management;
+- ✅ [Проблема зависания загрузки медиа на iOS](https://github.com/telemt/telemt/issues/2).
+
+## Планы
+
+- Публичный IP в ссылках;
+- Перезагрузка конфигурации на лету;
+- Привязка к устройству или IP для входящих и исходящих соединений;
+- Поддержка рекламных тегов по SNI / секретному ключу;
+- Улучшенная обработка ошибок;
+- Zero-copy оптимизации;
+- Проверка состояния дата-центров;
+- Отсутствие глобального изменяемого состояния;
+- Изоляция клиентов и справедливое распределение трафика;
+- «Политика секретов» — маршрутизация по SNI / секрету;
+- Балансировщик с несколькими источниками и отработка отказов;
+- Строгие FSM для handshake;
+- Улучшенная защита от replay-атак;
+- Веб-интерфейс: статистика, состояние работоспособности, задержка, пользовательский опыт...

benches/crypto_bench.rs

@@ -1,5 +1,5 @@
 // Cryptobench
-use criterion::{black_box, criterion_group, Criterion};
+use criterion::{Criterion, black_box, criterion_group};
 
 fn bench_aes_ctr(c: &mut Criterion) {
     c.bench_function("aes_ctr_encrypt_64kb", |b| {

config.full.toml

@@ -1,697 +0,0 @@
-# ==============================================================================
-#
-#   TELEMT — Advanced Rust-based Telegram MTProto Proxy
-#   Full Configuration Reference
-#
-#   This file is both a working config and a complete documentation.
-#   Every parameter is explained. Read it top to bottom before deploying.
-#
-#   Quick Start:
-#     1. Set [server].port to your desired port (443 recommended)
-#     2. Generate a secret: openssl rand -hex 16
-#     3. Put it in [access.users] under a name you choose
-#     4. Set [censorship].tls_domain to a popular unblocked HTTPS site
-#     5. Set your public IP in [general].middle_proxy_nat_ip
-#        and [general.links].public_host
-#     6. Set announce IP in [[server.listeners]]
-#     7. Run Telemt. It prints a tg:// link. Send it to your users.
-#
-#   Modes of Operation:
-#     Direct Mode  (use_middle_proxy = false)
-#       Connects straight to Telegram DCs via TCP. Simple, fast, low overhead.
-#       No ad_tag support. No CDN DC support (203, etc).
-#
-#     Middle-Proxy Mode  (use_middle_proxy = true)
-#       Connects to Telegram Middle-End servers via RPC protocol.
-#       Required for ad_tag monetization and CDN support.
-#       Requires proxy_secret_path and a valid public IP.
-#
-# ==============================================================================
-
-
-# ==============================================================================
-# LEGACY TOP-LEVEL FIELDS
-# ==============================================================================
-
-# Deprecated. Use [general.links].show instead.
-# Accepts "*" for all users, or an array like ["alice", "bob"].
-show_link = ["0"]
-
-# Fallback Datacenter index (1-5) when a client requests an unknown DC ID.
-# DC 2 is Amsterdam (Europe), closest for most CIS users.
-# default_dc = 2
-
-
-# ==============================================================================
-# GENERAL SETTINGS
-# ==============================================================================
-
-[general]
-
-# ------------------------------------------------------------------------------
-# Core Protocol
-# ------------------------------------------------------------------------------
-
-# Coalesce the MTProto handshake and first data payload into a single TCP packet.
-# Significantly reduces connection latency. No reason to disable.
-fast_mode = true
-
-# How the proxy connects to Telegram servers.
-# false = Direct TCP to Telegram DCs (simple, low overhead)
-# true  = Middle-End RPC protocol (required for ad_tag and CDN DCs)
-use_middle_proxy = true
-
-# 32-char hex Ad-Tag from @MTProxybot for sponsored channel injection.
-# Only works when use_middle_proxy = true.
-# Obtain yours: message @MTProxybot on Telegram, register your proxy.
-# ad_tag = "00000000000000000000000000000000"
-
-# ------------------------------------------------------------------------------
-# Middle-End Authentication
-# ------------------------------------------------------------------------------
-
-# Path to the Telegram infrastructure AES key file.
-# Auto-downloaded from https://core.telegram.org/getProxySecret on first run.
-# This key authenticates your proxy with Middle-End servers.
-proxy_secret_path = "proxy-secret"
-
-# ------------------------------------------------------------------------------
-# Public IP Configuration (Critical for Middle-Proxy Mode)
-# ------------------------------------------------------------------------------
-
-# Your server's PUBLIC IPv4 address.
-# Middle-End servers need this for the cryptographic Key Derivation Function.
-# If your server has a direct public IP, set it here.
-# If behind NAT (AWS, Docker, etc.), this MUST be your external IP.
-# If omitted, Telemt uses STUN to auto-detect (see middle_proxy_nat_probe).
-# middle_proxy_nat_ip = "203.0.113.10"
-
-# Auto-detect public IP via STUN servers defined in [network].
-# Set to false if you hardcoded middle_proxy_nat_ip above.
-# Set to true if you want automatic detection.
-middle_proxy_nat_probe = true
-
-# ------------------------------------------------------------------------------
-# Middle-End Connection Pool
-# ------------------------------------------------------------------------------
-
-# Number of persistent multiplexed RPC connections to ME servers.
-# All client traffic is routed through these "fat pipes".
-# 8 handles thousands of concurrent users comfortably.
-middle_proxy_pool_size = 8
-
-# Legacy field. Connections kept initialized but idle as warm standby.
-middle_proxy_warm_standby = 16
-
-# ------------------------------------------------------------------------------
-# Middle-End Keepalive
-# Telegram ME servers aggressively kill idle TCP connections.
-# These settings send periodic RPC_PING frames to keep pipes alive.
-# ------------------------------------------------------------------------------
-
-me_keepalive_enabled = true
-
-# Base interval between pings in seconds.
-me_keepalive_interval_secs = 25
-
-# Random jitter added to interval to prevent all connections pinging simultaneously.
-me_keepalive_jitter_secs = 5
-
-# Randomize ping payload bytes to prevent DPI from fingerprinting ping patterns.
-me_keepalive_payload_random = true
-
-# ------------------------------------------------------------------------------
-# Client-Side Limits
-# ------------------------------------------------------------------------------
-
-# Max buffered ciphertext per client (bytes) when upstream is slow.
-# Acts as backpressure to prevent memory exhaustion. 256KB is safe.
-crypto_pending_buffer = 262144
-
-# Maximum single MTProto frame size from client. 16MB is protocol standard.
-max_client_frame = 16777216
-
-# ------------------------------------------------------------------------------
-# Crypto Desynchronization Logging
-# Desync errors usually mean DPI/GFW is tampering with connections.
-# ------------------------------------------------------------------------------
-
-# true  = full forensics (trace ID, IP hash, hex dumps) for EVERY desync event
-# false = deduplicated logging, one entry per time window (prevents log spam)
-# Set true if you are actively debugging DPI interference.
-desync_all_full = true
-
-# ------------------------------------------------------------------------------
-# Beobachten — Built-in Honeypot / Active Probe Tracker
-# Tracks IPs that fail handshakes or behave like TLS scanners.
-# Output file can be fed into fail2ban or iptables for auto-blocking.
-# ------------------------------------------------------------------------------
-
-beobachten = true
-
-# How long (minutes) to remember a suspicious IP before expiring it.
-beobachten_minutes = 30
-
-# How often (seconds) to flush tracker state to disk.
-beobachten_flush_secs = 15
-
-# File path for the tracker output.
-beobachten_file = "cache/beobachten.txt"
-
-# ------------------------------------------------------------------------------
-# Hardswap — Zero-Downtime ME Pool Rotation
-# When Telegram updates ME server IPs, Hardswap creates a completely new pool,
-# waits until it is fully ready, migrates traffic, then kills the old pool.
-# Users experience zero interruption.
-# ------------------------------------------------------------------------------
-
-hardswap = true
-
-# ------------------------------------------------------------------------------
-# ME Pool Warmup Staggering
-# When creating a new pool, connections are opened one by one with delays
-# to avoid a burst of SYN packets that could trigger ISP flood protection.
-# ------------------------------------------------------------------------------
-
-me_warmup_stagger_enabled = true
-
-# Delay between each connection creation (milliseconds).
-me_warmup_step_delay_ms = 500
-
-# Random jitter added to the delay (milliseconds).
-me_warmup_step_jitter_ms = 300
-
-# ------------------------------------------------------------------------------
-# ME Reconnect Backoff
-# If an ME server drops the connection, Telemt retries with this strategy.
-# ------------------------------------------------------------------------------
-
-# Max simultaneous reconnect attempts per DC.
-me_reconnect_max_concurrent_per_dc = 8
-
-# Exponential backoff base (milliseconds).
-me_reconnect_backoff_base_ms = 500
-
-# Backoff ceiling (milliseconds). Will never wait longer than this.
-me_reconnect_backoff_cap_ms = 30000
-
-# Number of instant retries before switching to exponential backoff.
-me_reconnect_fast_retry_count = 12
-
-# ------------------------------------------------------------------------------
-# NAT Mismatch Behavior
-# If STUN-detected IP differs from local interface IP (you are behind NAT).
-# false = abort ME mode (safe default)
-# true  = force ME mode anyway (use if you know your NAT setup is correct)
-# ------------------------------------------------------------------------------
-
-stun_iface_mismatch_ignore = false
-
-# ------------------------------------------------------------------------------
-# Logging
-# ------------------------------------------------------------------------------
-
-# File to log unknown DC requests (DC IDs outside standard 1-5).
-unknown_dc_log_path = "unknown-dc.txt"
-
-# Verbosity: "debug" | "verbose" | "normal" | "silent"
-log_level = "normal"
-
-# Disable ANSI color codes in log output (useful for file logging).
-disable_colors = false
-
-# ------------------------------------------------------------------------------
-# FakeTLS Record Sizing
-# Buffer small MTProto packets into larger TLS records to mimic real HTTPS.
-# Real HTTPS servers send records close to MTU size (~1400 bytes).
-# A stream of tiny TLS records is a strong DPI signal.
-# Set to 0 to disable. Set to 1400 for realistic HTTPS emulation.
-# ------------------------------------------------------------------------------
-
-fast_mode_min_tls_record = 1400
-
-# ------------------------------------------------------------------------------
-# Periodic Updates
-# ------------------------------------------------------------------------------
-
-# How often (seconds) to re-fetch ME server lists and proxy secrets
-# from core.telegram.org. Keeps your proxy in sync with Telegram infrastructure.
-update_every = 300
-
-# How often (seconds) to force a Hardswap even if the ME map is unchanged.
-# Shorter intervals mean shorter-lived TCP flows, harder for DPI to profile.
-me_reinit_every_secs = 600
-
-# ------------------------------------------------------------------------------
-# Hardswap Warmup Tuning
-# Fine-grained control over how the new pool is warmed up before traffic switch.
-# ------------------------------------------------------------------------------
-
-me_hardswap_warmup_delay_min_ms = 1000
-me_hardswap_warmup_delay_max_ms = 2000
-me_hardswap_warmup_extra_passes = 3
-me_hardswap_warmup_pass_backoff_base_ms = 500
-
-# ------------------------------------------------------------------------------
-# Config Update Debouncing
-# Telegram sometimes pushes transient/broken configs. Debouncing requires
-# N consecutive identical fetches before applying a change.
-# ------------------------------------------------------------------------------
-
-# ME server list must be identical for this many fetches before applying.
-me_config_stable_snapshots = 2
-
-# Minimum seconds between config applications.
-me_config_apply_cooldown_secs = 300
-
-# Proxy secret must be identical for this many fetches before applying.
-proxy_secret_stable_snapshots = 2
-
-# ------------------------------------------------------------------------------
-# Proxy Secret Rotation
-# ------------------------------------------------------------------------------
-
-# Apply newly downloaded secrets at runtime without restart.
-proxy_secret_rotate_runtime = true
-
-# Maximum acceptable secret length (bytes). Rejects abnormally large secrets.
-proxy_secret_len_max = 256
-
-# ------------------------------------------------------------------------------
-# Hardswap Drain Settings
-# Controls graceful shutdown of old ME connections during pool rotation.
-# ------------------------------------------------------------------------------
-
-# Seconds to keep old connections alive for in-flight data before force-closing.
-me_pool_drain_ttl_secs = 90
-
-# Minimum ratio of healthy connections in new pool before draining old pool.
-# 0.8 = at least 80% of new pool must be ready.
-me_pool_min_fresh_ratio = 0.8
-
-# Maximum seconds to wait for drain to complete before force-killing.
-me_reinit_drain_timeout_secs = 120
-
-# ------------------------------------------------------------------------------
-# NTP Clock Check
-# MTProto uses timestamps. Clock drift > 30 seconds breaks handshakes.
-# Telemt checks on startup and warns if out of sync.
-# ------------------------------------------------------------------------------
-
-ntp_check = true
-ntp_servers = ["pool.ntp.org"]
-
-# ------------------------------------------------------------------------------
-# Auto-Degradation
-# If ME servers become completely unreachable (ISP blocking),
-# automatically fall back to Direct Mode so users stay connected.
-# ------------------------------------------------------------------------------
-
-auto_degradation_enabled = true
-
-# Number of DC groups that must be unreachable before triggering fallback.
-degradation_min_unavailable_dc_groups = 2
-
-
-# ==============================================================================
-# ALLOWED CLIENT PROTOCOLS
-# Only enable what you need. In censored regions, TLS-only is safest.
-# ==============================================================================
-
-[general.modes]
-
-# Classic MTProto. Unobfuscated length prefixes. Trivially detected by DPI.
-# No reason to enable unless you have ancient clients.
-classic = false
-
-# Obfuscated MTProto with randomized padding. Better than classic, but
-# still detectable by statistical analysis of packet sizes.
-secure = false
-
-# FakeTLS (ee-secrets). Wraps MTProto in TLS 1.3 framing.
-# To DPI, it looks like a normal HTTPS connection.
-# This should be the ONLY enabled mode in censored environments.
-tls = true
-
-
-# ==============================================================================
-# STARTUP LINK GENERATION
-# Controls what tg:// invite links are printed to console on startup.
-# ==============================================================================
-
-[general.links]
-
-# Which users to generate links for.
-# "*" = all users, or an array like ["alice", "bob"].
-show = "*"
-
-# IP or domain to embed in the tg:// link.
-# If omitted, Telemt uses STUN to auto-detect.
-# Set this to your server's public IP or domain for reliable links.
-# public_host = "proxy.example.com"
-
-# Port to embed in the tg:// link.
-# If omitted, uses [server].port.
-# public_port = 443
-
-
-# ==============================================================================
-# NETWORK & IP RESOLUTION
-# ==============================================================================
-
-[network]
-
-# Enable IPv4 for outbound connections to Telegram.
-ipv4 = true
-
-# Enable IPv6 for outbound connections to Telegram.
-ipv6 = false
-
-# Prefer IPv4 (4) or IPv6 (6) when both are available.
-prefer = 4
-
-# Experimental: use both IPv4 and IPv6 ME servers simultaneously.
-# May improve reliability but doubles connection count.
-multipath = false
-
-# STUN servers for external IP discovery.
-# Used for Middle-Proxy KDF (if nat_probe=true) and link generation.
-stun_servers = [
-    "stun.l.google.com:5349",
-    "stun1.l.google.com:3478",
-    "stun.gmx.net:3478",
-    "stun.l.google.com:19302"
-]
-
-# If UDP STUN is blocked, attempt TCP-based STUN as fallback.
-stun_tcp_fallback = true
-
-# If all STUN fails, use HTTP APIs to discover public IP.
-http_ip_detect_urls = [
-    "https://ifconfig.me/ip",
-    "https://api.ipify.org"
-]
-
-# Cache discovered public IP to this file to survive restarts.
-cache_public_ip_path = "cache/public_ip.txt"
-
-
-# ==============================================================================
-# SERVER BINDING & METRICS
-# ==============================================================================
-
-[server]
-
-# TCP port to listen on.
-# 443 is recommended (looks like normal HTTPS traffic).
-port = 443
-
-# IPv4 bind address. "0.0.0.0" = all interfaces.
-listen_addr_ipv4 = "0.0.0.0"
-
-# IPv6 bind address. "::" = all interfaces.
-listen_addr_ipv6 = "::"
-
-# Unix socket listener (for reverse proxy setups with Nginx/HAProxy).
-# listen_unix_sock = "/var/run/telemt.sock"
-# listen_unix_sock_perm = "0660"
-
-# Enable PROXY protocol header parsing.
-# Set true ONLY if Telemt is behind HAProxy/Nginx that injects PROXY headers.
-# If enabled without a proxy in front, clients will fail to connect.
-proxy_protocol = false
-
-# Prometheus metrics HTTP endpoint port.
-# Uncomment to enable. Access at http://your-server:9090/metrics
-# metrics_port = 9090
-
-# IP ranges allowed to access the metrics endpoint.
-metrics_whitelist = [
-    "127.0.0.1/32",
-    "::1/128"
-]
-
-# ------------------------------------------------------------------------------
-# Listener Overrides
-# Define explicit listeners with specific bind IPs and announce IPs.
-# The announce IP is what gets embedded in tg:// links and sent to ME servers.
-# You MUST set announce to your server's public IP for ME mode to work.
-# ------------------------------------------------------------------------------
-
-# [[server.listeners]]
-# ip = "0.0.0.0"
-# announce = "203.0.113.10"
-# reuse_allow = false
-
-
-# ==============================================================================
-# TIMEOUTS (seconds unless noted)
-# ==============================================================================
-
-[timeouts]
-
-# Maximum time for client to complete FakeTLS + MTProto handshake.
-client_handshake = 15
-
-# Maximum time to establish TCP connection to upstream Telegram DC.
-tg_connect = 10
-
-# TCP keepalive interval for client connections.
-client_keepalive = 60
-
-# Maximum client inactivity before dropping the connection.
-client_ack = 300
-
-# Instant retry count for a single ME endpoint before giving up on it.
-me_one_retry = 3
-
-# Timeout (milliseconds) for a single ME endpoint connection attempt.
-me_one_timeout_ms = 1500
-
-
-# ==============================================================================
-# ANTI-CENSORSHIP / FAKETLS / MASKING
-# This is where Telemt becomes invisible to Deep Packet Inspection.
-# ==============================================================================
-
-[censorship]
-
-# ------------------------------------------------------------------------------
-# TLS Domain Fronting
-# The SNI (Server Name Indication) your proxy presents to connecting clients.
-# Must be a popular, unblocked HTTPS website in your target country.
-# DPI sees traffic to this domain. Choose carefully.
-# Good choices: major CDNs, banks, government sites, search engines.
-# Bad choices: obscure sites, already-blocked domains.
-# ------------------------------------------------------------------------------
-
-tls_domain = "www.google.com"
-
-# ------------------------------------------------------------------------------
-# Active Probe Masking
-# When someone connects but fails the MTProto handshake (wrong secret),
-# they might be an ISP active prober testing if this is a proxy.
-#
-# mask = false: drop the connection (prober knows something is here)
-# mask = true:  transparently proxy them to mask_host (prober sees a real website)
-#
-# With mask enabled, your server is indistinguishable from a real web server
-# to anyone who doesn't have the correct secret.
-# ------------------------------------------------------------------------------
-
-mask = true
-
-# The real web server to forward failed handshakes to.
-# If omitted, defaults to tls_domain.
-# mask_host = "www.google.com"
-
-# Port on the mask host to connect to.
-mask_port = 443
-
-# Inject PROXY protocol header when forwarding to mask host.
-# 0 = disabled, 1 = v1, 2 = v2. Leave disabled unless mask_host expects it.
-# mask_proxy_protocol = 0
-
-# ------------------------------------------------------------------------------
-# TLS Certificate Emulation
-# ------------------------------------------------------------------------------
-
-# Size (bytes) of the locally generated fake TLS certificate.
-# Only used when tls_emulation is disabled.
-fake_cert_len = 2048
-
-# KILLER FEATURE: Real-Time TLS Emulation.
-# Telemt connects to tls_domain, fetches its actual TLS 1.3 certificate chain,
-# and exactly replicates the byte sizes of ServerHello and Certificate records.
-# Defeats DPI that uses TLS record length heuristics to detect proxies.
-# Strongly recommended in censored environments.
-tls_emulation = true
-
-# Directory to cache fetched TLS certificates.
-tls_front_dir = "tlsfront"
-
-# ------------------------------------------------------------------------------
-# ServerHello Timing
-# Real web servers take 30-150ms to respond to ClientHello due to network
-# latency and crypto processing. A proxy responding in <1ms is suspicious.
-# These settings add realistic delay to mimic genuine server behavior.
-# ------------------------------------------------------------------------------
-
-# Minimum delay before sending ServerHello (milliseconds).
-server_hello_delay_min_ms = 50
-
-# Maximum delay before sending ServerHello (milliseconds).
-server_hello_delay_max_ms = 150
-
-# ------------------------------------------------------------------------------
-# TLS Session Tickets
-# Real TLS 1.3 servers send 1-2 NewSessionTicket messages after handshake.
-# A server that sends zero tickets is anomalous and may trigger DPI flags.
-# Set this to match your tls_domain's behavior (usually 2).
-# ------------------------------------------------------------------------------
-
-# tls_new_session_tickets = 0
-
-# ------------------------------------------------------------------------------
-# Full Certificate Frequency
-# When tls_emulation is enabled, this controls how often (per client IP)
-# to send the complete emulated certificate chain.
-#
-# > 0: Subsequent connections within TTL seconds get a smaller cached version.
-#       Saves bandwidth but creates a detectable size difference between
-#       first and repeat connections.
-#
-# = 0: Every connection gets the full certificate. More bandwidth but
-#       perfectly consistent behavior, no anomalies for DPI to detect.
-# ------------------------------------------------------------------------------
-
-tls_full_cert_ttl_secs = 0
-
-# ------------------------------------------------------------------------------
-# ALPN Enforcement
-# Ensure ServerHello responds with the exact ALPN protocol the client requested.
-# Mismatched ALPN (e.g., client asks h2, server says http/1.1) is a DPI red flag.
-# ------------------------------------------------------------------------------
-
-alpn_enforce = true
-
-
-# ==============================================================================
-# ACCESS CONTROL & USERS
-# ==============================================================================
-
-[access]
-
-# ------------------------------------------------------------------------------
-# Replay Attack Protection
-# DPI can record a legitimate user's handshake and replay it later to probe
-# whether the server is a proxy. Telemt remembers recent handshake nonces
-# and rejects duplicates.
-# ------------------------------------------------------------------------------
-
-# Number of nonce slots in the replay detection buffer.
-replay_check_len = 65536
-
-# How long (seconds) to remember nonces before expiring them.
-replay_window_secs = 1800
-
-# Allow clients with incorrect system clocks to connect.
-# false = reject clients with significant time skew (more secure)
-# true  = accept anyone regardless of clock (more permissive)
-ignore_time_skew = false
-
-# ------------------------------------------------------------------------------
-# User Secrets
-# Each user needs a unique 32-character hex string as their secret.
-# Generate with: openssl rand -hex 16
-#
-# This secret is embedded in the tg:// link. Anyone with it can connect.
-# Format: username = "hex_secret"
-# ------------------------------------------------------------------------------
-
-[access.users]
-# alice = "0123456789abcdef0123456789abcdef"
-# bob = "fedcba9876543210fedcba9876543210"
-
-# ------------------------------------------------------------------------------
-# Per-User Connection Limits
-# Limits concurrent TCP connections per user to prevent secret sharing.
-# Uncomment and set for each user as needed.
-# ------------------------------------------------------------------------------
-
-[access.user_max_tcp_conns]
-# alice = 100
-# bob = 50
-
-# ------------------------------------------------------------------------------
-# Per-User Expiration Dates
-# Automatically revoke access after the specified date (ISO 8601 format).
-# ------------------------------------------------------------------------------
-
-[access.user_expirations]
-# alice = "2025-12-31T23:59:59Z"
-# bob = "2026-06-15T00:00:00Z"
-
-# ------------------------------------------------------------------------------
-# Per-User Data Quotas
-# Maximum total bytes transferred per user. Connection refused after limit.
-# ------------------------------------------------------------------------------
-
-[access.user_data_quota]
-# alice = 107374182400
-# bob = 53687091200
-
-# ------------------------------------------------------------------------------
-# Per-User Unique IP Limits
-# Maximum number of different IP addresses that can use this secret
-# at the same time. Highly effective against secret leaking/sharing.
-# Set to 1 for single-device, 2-3 for phone+desktop, etc.
-# ------------------------------------------------------------------------------
-
-[access.user_max_unique_ips]
-# alice = 3
-# bob = 2
-
-
-# ==============================================================================
-# UPSTREAM ROUTING
-# Controls how Telemt connects to Telegram servers (or ME servers).
-# If omitted entirely, uses the OS default route.
-# ==============================================================================
-
-# ------------------------------------------------------------------------------
-# Direct upstream: use the server's own network interface.
-# You can optionally bind to a specific interface or local IP.
-# ------------------------------------------------------------------------------
-
-# [[upstreams]]
-# type = "direct"
-# interface = "eth0"
-# bind_addresses = ["192.0.2.10"]
-# weight = 1
-# enabled = true
-# scopes = "*"
-
-# ------------------------------------------------------------------------------
-# SOCKS5 upstream: route Telegram traffic through a SOCKS5 proxy.
-# Useful if your server's IP is blocked from reaching Telegram DCs.
-# ------------------------------------------------------------------------------
-
-# [[upstreams]]
-# type = "socks5"
-# address = "198.51.100.30:1080"
-# username = "proxy-user"
-# password = "proxy-pass"
-# weight = 1
-# enabled = true
-
-
-# ==============================================================================
-# DATACENTER OVERRIDES
-# Force specific DC IDs to route to specific IP:Port combinations.
-# DC 203 (CDN) is auto-injected by Telemt if not specified here.
-# ==============================================================================
-
-# [dc_overrides]
-# "201" = "149.154.175.50:443"
-# "202" = ["149.154.167.51:443", "149.154.175.100:443"]

config.toml

@@ -4,7 +4,7 @@
 
 # === General Settings ===
 [general]
-use_middle_proxy = false
+use_middle_proxy = true
 # Global ad_tag fallback when user has no per-user tag in [access.user_ad_tags]
 # ad_tag = "00000000000000000000000000000000"
 # Per-user ad_tag in [access.user_ad_tags] (32 hex from @MTProxybot)
@@ -32,6 +32,7 @@ show = "*"
 port = 443
 # proxy_protocol = false           # Enable if behind HAProxy/nginx with PROXY protocol
 # metrics_port = 9090
+# metrics_listen = "0.0.0.0:9090"  # Listen address for metrics (overrides metrics_port)
 # metrics_whitelist = ["127.0.0.1", "::1", "0.0.0.0/0"]
 
 [server.api]

contrib/openbsd/telemt.rcd

@@ -0,0 +1,16 @@
+#!/bin/ksh
+# /etc/rc.d/telemt
+#
+# rc.d(8) script for Telemt MTProxy daemon.
+# Tokio runtime does not daemonize itself, so rc_bg=YES is used.
+
+daemon="/usr/local/bin/telemt"
+daemon_user="_telemt"
+daemon_flags="/etc/telemt/config.toml"
+
+. /etc/rc.d/rc.subr
+
+rc_bg=YES
+rc_reload=NO
+
+rc_cmd $1

contrib/systemd/system-user-telemt.conf

@@ -0,0 +1,3 @@
+u telemt - "telemt user" /var/lib/telemt -
+g telemt - -
+m telemt telemt

contrib/systemd/telemt.service

@@ -0,0 +1,21 @@
+[Unit]
+Description=Telemt
+Wants=network-online.target
+After=multi-user.target network.target network-online.target
+
+[Service]
+Type=simple
+User=telemt
+Group=telemt
+WorkingDirectory=/var/lib/telemt
+ExecStart=/usr/bin/telemt /etc/telemt/telemt.toml
+Restart=on-failure
+RestartSec=10
+LimitNOFILE=65536
+AmbientCapabilities=CAP_NET_BIND_SERVICE
+CapabilityBoundingSet=CAP_NET_BIND_SERVICE
+NoNewPrivileges=true
+
+
+[Install]
+WantedBy=multi-user.target

contrib/systemd/tmpfiles-telemt.conf

@@ -0,0 +1 @@
+d /var/lib/telemt 700 telemt telemt

docker-compose.yml

@@ -7,6 +7,7 @@ services:
     ports:
       - "443:443"
       - "127.0.0.1:9090:9090"
+      - "127.0.0.1:9091:9091"
     # Allow caching 'proxy-secret' in read-only container
     working_dir: /run/telemt
     volumes:

docs/API.md

@@ -1,548 +0,0 @@
-# Telemt Control API
-
-## Purpose
-Control-plane HTTP API for runtime visibility and user/config management.
-Data-plane MTProto traffic is out of scope.
-
-## Runtime Configuration
-API runtime is configured in `[server.api]`.
-
-| Field | Type | Default | Description |
-| --- | --- | --- | --- |
-| `enabled` | `bool` | `false` | Enables REST API listener. |
-| `listen` | `string` (`IP:PORT`) | `127.0.0.1:9091` | API bind address. |
-| `whitelist` | `CIDR[]` | `127.0.0.1/32, ::1/128` | Source IP allowlist. Empty list means allow all. |
-| `auth_header` | `string` | `""` | Exact value for `Authorization` header. Empty disables header auth. |
-| `request_body_limit_bytes` | `usize` | `65536` | Maximum request body size. Must be `> 0`. |
-| `minimal_runtime_enabled` | `bool` | `false` | Enables runtime snapshot endpoints requiring ME pool read-lock aggregation. |
-| `minimal_runtime_cache_ttl_ms` | `u64` | `1000` | Cache TTL for minimal snapshots. `0` disables cache; valid range is `[0, 60000]`. |
-| `read_only` | `bool` | `false` | Disables mutating endpoints. |
-
-`server.admin_api` is accepted as an alias for backward compatibility.
-
-Runtime validation for API config:
-- `server.api.listen` must be a valid `IP:PORT`.
-- `server.api.request_body_limit_bytes` must be `> 0`.
-- `server.api.minimal_runtime_cache_ttl_ms` must be within `[0, 60000]`.
-
-## Protocol Contract
-
-| Item | Value |
-| --- | --- |
-| Transport | HTTP/1.1 |
-| Content type | `application/json; charset=utf-8` |
-| Prefix | `/v1` |
-| Optimistic concurrency | `If-Match: <revision>` on mutating requests (optional) |
-| Revision format | SHA-256 hex of current `config.toml` content |
-
-### Success Envelope
-```json
-{
-  "ok": true,
-  "data": {},
-  "revision": "sha256-hex"
-}
-```
-
-### Error Envelope
-```json
-{
-  "ok": false,
-  "error": {
-    "code": "machine_code",
-    "message": "human-readable"
-  },
-  "request_id": 1
-}
-```
-
-## Request Processing Order
-
-Requests are processed in this order:
-1. `api_enabled` gate (`503 api_disabled` if disabled).
-2. Source IP whitelist gate (`403 forbidden`).
-3. `Authorization` header gate when configured (`401 unauthorized`).
-4. Route and method matching (`404 not_found` or `405 method_not_allowed`).
-5. `read_only` gate for mutating routes (`403 read_only`).
-6. Request body read/limit/JSON decode (`413 payload_too_large`, `400 bad_request`).
-7. Business validation and config write path.
-
-Notes:
-- Whitelist is evaluated against the direct TCP peer IP (`SocketAddr::ip`), without `X-Forwarded-For` support.
-- `Authorization` check is exact string equality against configured `auth_header`.
-
-## Endpoint Matrix
-
-| Method | Path | Body | Success | `data` contract |
-| --- | --- | --- | --- | --- |
-| `GET` | `/v1/health` | none | `200` | `HealthData` |
-| `GET` | `/v1/stats/summary` | none | `200` | `SummaryData` |
-| `GET` | `/v1/stats/zero/all` | none | `200` | `ZeroAllData` |
-| `GET` | `/v1/stats/upstreams` | none | `200` | `UpstreamsData` |
-| `GET` | `/v1/stats/minimal/all` | none | `200` | `MinimalAllData` |
-| `GET` | `/v1/stats/me-writers` | none | `200` | `MeWritersData` |
-| `GET` | `/v1/stats/dcs` | none | `200` | `DcStatusData` |
-| `GET` | `/v1/stats/users` | none | `200` | `UserInfo[]` |
-| `GET` | `/v1/users` | none | `200` | `UserInfo[]` |
-| `POST` | `/v1/users` | `CreateUserRequest` | `201` | `CreateUserResponse` |
-| `GET` | `/v1/users/{username}` | none | `200` | `UserInfo` |
-| `PATCH` | `/v1/users/{username}` | `PatchUserRequest` | `200` | `UserInfo` |
-| `DELETE` | `/v1/users/{username}` | none | `200` | `string` (deleted username) |
-| `POST` | `/v1/users/{username}/rotate-secret` | `RotateSecretRequest` or empty body | `404` | `ErrorResponse` (`not_found`, current runtime behavior) |
-
-## Common Error Codes
-
-| HTTP | `error.code` | Trigger |
-| --- | --- | --- |
-| `400` | `bad_request` | Invalid JSON, validation failures, malformed request body. |
-| `401` | `unauthorized` | Missing/invalid `Authorization` when `auth_header` is configured. |
-| `403` | `forbidden` | Source IP is not allowed by whitelist. |
-| `403` | `read_only` | Mutating endpoint called while `read_only=true`. |
-| `404` | `not_found` | Unknown route, unknown user, or unsupported sub-route (including current `rotate-secret` route). |
-| `405` | `method_not_allowed` | Unsupported method for `/v1/users/{username}` route shape. |
-| `409` | `revision_conflict` | `If-Match` revision mismatch. |
-| `409` | `user_exists` | User already exists on create. |
-| `409` | `last_user_forbidden` | Attempt to delete last configured user. |
-| `413` | `payload_too_large` | Body exceeds `request_body_limit_bytes`. |
-| `500` | `internal_error` | Internal error (I/O, serialization, config load/save). |
-| `503` | `api_disabled` | API disabled in config. |
-
-## Routing and Method Edge Cases
-
-| Case | Behavior |
-| --- | --- |
-| Path matching | Exact match on `req.uri().path()`. Query string does not affect route matching. |
-| Trailing slash | Not normalized. Example: `/v1/users/` is `404`. |
-| Username route with extra slash | `/v1/users/{username}/...` is not treated as user route and returns `404`. |
-| `PUT /v1/users/{username}` | `405 method_not_allowed`. |
-| `POST /v1/users/{username}` | `404 not_found`. |
-| `POST /v1/users/{username}/rotate-secret` | `404 not_found` in current release due route matcher limitation. |
-
-## Body and JSON Semantics
-
-- Request body is read only for mutating routes that define a body contract.
-- Body size limit is enforced during streaming read (`413 payload_too_large`).
-- Invalid transport body frame returns `400 bad_request` (`Invalid request body`).
-- Invalid JSON returns `400 bad_request` (`Invalid JSON body`).
-- `Content-Type` is not required for JSON parsing.
-- Unknown JSON fields are ignored by deserialization.
-- `PATCH` updates only provided fields and does not support explicit clearing of optional fields.
-- `If-Match` supports both quoted and unquoted values; surrounding whitespace is trimmed.
-
-## Request Contracts
-
-### `CreateUserRequest`
-| Field | Type | Required | Description |
-| --- | --- | --- | --- |
-| `username` | `string` | yes | `[A-Za-z0-9_.-]`, length `1..64`. |
-| `secret` | `string` | no | Exactly 32 hex chars. If missing, generated automatically. |
-| `user_ad_tag` | `string` | no | Exactly 32 hex chars. |
-| `max_tcp_conns` | `usize` | no | Per-user concurrent TCP limit. |
-| `expiration_rfc3339` | `string` | no | RFC3339 expiration timestamp. |
-| `data_quota_bytes` | `u64` | no | Per-user traffic quota. |
-| `max_unique_ips` | `usize` | no | Per-user unique source IP limit. |
-
-### `PatchUserRequest`
-| Field | Type | Required | Description |
-| --- | --- | --- | --- |
-| `secret` | `string` | no | Exactly 32 hex chars. |
-| `user_ad_tag` | `string` | no | Exactly 32 hex chars. |
-| `max_tcp_conns` | `usize` | no | Per-user concurrent TCP limit. |
-| `expiration_rfc3339` | `string` | no | RFC3339 expiration timestamp. |
-| `data_quota_bytes` | `u64` | no | Per-user traffic quota. |
-| `max_unique_ips` | `usize` | no | Per-user unique source IP limit. |
-
-### `RotateSecretRequest`
-| Field | Type | Required | Description |
-| --- | --- | --- | --- |
-| `secret` | `string` | no | Exactly 32 hex chars. If missing, generated automatically. |
-
-Note: the request contract is defined, but the corresponding route currently returns `404` (see routing edge cases).
-
-## Response Data Contracts
-
-### `HealthData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `status` | `string` | Always `"ok"`. |
-| `read_only` | `bool` | Mirrors current API `read_only` mode. |
-
-### `SummaryData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `uptime_seconds` | `f64` | Process uptime in seconds. |
-| `connections_total` | `u64` | Total accepted client connections. |
-| `connections_bad_total` | `u64` | Failed/invalid client connections. |
-| `handshake_timeouts_total` | `u64` | Handshake timeout count. |
-| `configured_users` | `usize` | Number of configured users in config. |
-
-### `ZeroAllData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `generated_at_epoch_secs` | `u64` | Snapshot time (Unix epoch seconds). |
-| `core` | `ZeroCoreData` | Core counters and telemetry policy snapshot. |
-| `upstream` | `ZeroUpstreamData` | Upstream connect counters/histogram buckets. |
-| `middle_proxy` | `ZeroMiddleProxyData` | ME protocol/health counters. |
-| `pool` | `ZeroPoolData` | ME pool lifecycle counters. |
-| `desync` | `ZeroDesyncData` | Frame desync counters. |
-
-#### `ZeroCoreData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `uptime_seconds` | `f64` | Process uptime. |
-| `connections_total` | `u64` | Total accepted connections. |
-| `connections_bad_total` | `u64` | Failed/invalid connections. |
-| `handshake_timeouts_total` | `u64` | Handshake timeouts. |
-| `configured_users` | `usize` | Configured user count. |
-| `telemetry_core_enabled` | `bool` | Core telemetry toggle. |
-| `telemetry_user_enabled` | `bool` | User telemetry toggle. |
-| `telemetry_me_level` | `string` | ME telemetry level (`off|normal|verbose`). |
-
-#### `ZeroUpstreamData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `connect_attempt_total` | `u64` | Total upstream connect attempts. |
-| `connect_success_total` | `u64` | Successful upstream connects. |
-| `connect_fail_total` | `u64` | Failed upstream connects. |
-| `connect_failfast_hard_error_total` | `u64` | Fail-fast hard errors. |
-| `connect_attempts_bucket_1` | `u64` | Connect attempts resolved in 1 try. |
-| `connect_attempts_bucket_2` | `u64` | Connect attempts resolved in 2 tries. |
-| `connect_attempts_bucket_3_4` | `u64` | Connect attempts resolved in 3-4 tries. |
-| `connect_attempts_bucket_gt_4` | `u64` | Connect attempts requiring more than 4 tries. |
-| `connect_duration_success_bucket_le_100ms` | `u64` | Successful connects <=100 ms. |
-| `connect_duration_success_bucket_101_500ms` | `u64` | Successful connects 101-500 ms. |
-| `connect_duration_success_bucket_501_1000ms` | `u64` | Successful connects 501-1000 ms. |
-| `connect_duration_success_bucket_gt_1000ms` | `u64` | Successful connects >1000 ms. |
-| `connect_duration_fail_bucket_le_100ms` | `u64` | Failed connects <=100 ms. |
-| `connect_duration_fail_bucket_101_500ms` | `u64` | Failed connects 101-500 ms. |
-| `connect_duration_fail_bucket_501_1000ms` | `u64` | Failed connects 501-1000 ms. |
-| `connect_duration_fail_bucket_gt_1000ms` | `u64` | Failed connects >1000 ms. |
-
-### `UpstreamsData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `enabled` | `bool` | Runtime upstream snapshot availability according to API config. |
-| `reason` | `string?` | `feature_disabled` or `source_unavailable` when runtime snapshot is unavailable. |
-| `generated_at_epoch_secs` | `u64` | Snapshot generation time. |
-| `zero` | `ZeroUpstreamData` | Always available zero-cost upstream counters block. |
-| `summary` | `UpstreamSummaryData?` | Runtime upstream aggregate view, null when unavailable. |
-| `upstreams` | `UpstreamStatus[]?` | Per-upstream runtime status rows, null when unavailable. |
-
-#### `UpstreamSummaryData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `configured_total` | `usize` | Total configured upstream entries. |
-| `healthy_total` | `usize` | Upstreams currently marked healthy. |
-| `unhealthy_total` | `usize` | Upstreams currently marked unhealthy. |
-| `direct_total` | `usize` | Number of direct upstream entries. |
-| `socks4_total` | `usize` | Number of SOCKS4 upstream entries. |
-| `socks5_total` | `usize` | Number of SOCKS5 upstream entries. |
-
-#### `UpstreamStatus`
-| Field | Type | Description |
-| --- | --- | --- |
-| `upstream_id` | `usize` | Runtime upstream index. |
-| `route_kind` | `string` | Upstream route kind: `direct`, `socks4`, `socks5`. |
-| `address` | `string` | Upstream address (`direct` for direct route kind). Authentication fields are intentionally omitted. |
-| `weight` | `u16` | Selection weight. |
-| `scopes` | `string` | Configured scope selector string. |
-| `healthy` | `bool` | Current health flag. |
-| `fails` | `u32` | Consecutive fail counter. |
-| `last_check_age_secs` | `u64` | Seconds since the last health-check update. |
-| `effective_latency_ms` | `f64?` | Effective upstream latency used by selector. |
-| `dc` | `UpstreamDcStatus[]` | Per-DC latency/IP preference snapshot. |
-
-#### `UpstreamDcStatus`
-| Field | Type | Description |
-| --- | --- | --- |
-| `dc` | `i16` | Telegram DC id. |
-| `latency_ema_ms` | `f64?` | Per-DC latency EMA value. |
-| `ip_preference` | `string` | Per-DC IP family preference: `unknown`, `prefer_v4`, `prefer_v6`, `both_work`, `unavailable`. |
-
-#### `ZeroMiddleProxyData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `keepalive_sent_total` | `u64` | ME keepalive packets sent. |
-| `keepalive_failed_total` | `u64` | ME keepalive send failures. |
-| `keepalive_pong_total` | `u64` | Keepalive pong responses received. |
-| `keepalive_timeout_total` | `u64` | Keepalive timeout events. |
-| `rpc_proxy_req_signal_sent_total` | `u64` | RPC proxy activity signals sent. |
-| `rpc_proxy_req_signal_failed_total` | `u64` | RPC proxy activity signal failures. |
-| `rpc_proxy_req_signal_skipped_no_meta_total` | `u64` | Signals skipped due to missing metadata. |
-| `rpc_proxy_req_signal_response_total` | `u64` | RPC proxy signal responses received. |
-| `rpc_proxy_req_signal_close_sent_total` | `u64` | RPC proxy close signals sent. |
-| `reconnect_attempt_total` | `u64` | ME reconnect attempts. |
-| `reconnect_success_total` | `u64` | Successful reconnects. |
-| `handshake_reject_total` | `u64` | ME handshake rejects. |
-| `handshake_error_codes` | `ZeroCodeCount[]` | Handshake rejects grouped by code. |
-| `reader_eof_total` | `u64` | ME reader EOF events. |
-| `idle_close_by_peer_total` | `u64` | Idle closes initiated by peer. |
-| `route_drop_no_conn_total` | `u64` | Route drops due to missing bound connection. |
-| `route_drop_channel_closed_total` | `u64` | Route drops due to closed channel. |
-| `route_drop_queue_full_total` | `u64` | Route drops due to full queue (total). |
-| `route_drop_queue_full_base_total` | `u64` | Route drops in base queue mode. |
-| `route_drop_queue_full_high_total` | `u64` | Route drops in high queue mode. |
-| `socks_kdf_strict_reject_total` | `u64` | SOCKS KDF strict rejects. |
-| `socks_kdf_compat_fallback_total` | `u64` | SOCKS KDF compat fallbacks. |
-| `endpoint_quarantine_total` | `u64` | Endpoint quarantine activations. |
-| `kdf_drift_total` | `u64` | KDF drift detections. |
-| `kdf_port_only_drift_total` | `u64` | KDF port-only drift detections. |
-| `hardswap_pending_reuse_total` | `u64` | Pending hardswap reused events. |
-| `hardswap_pending_ttl_expired_total` | `u64` | Pending hardswap TTL expiry events. |
-| `single_endpoint_outage_enter_total` | `u64` | Entered single-endpoint outage mode. |
-| `single_endpoint_outage_exit_total` | `u64` | Exited single-endpoint outage mode. |
-| `single_endpoint_outage_reconnect_attempt_total` | `u64` | Reconnect attempts in outage mode. |
-| `single_endpoint_outage_reconnect_success_total` | `u64` | Reconnect successes in outage mode. |
-| `single_endpoint_quarantine_bypass_total` | `u64` | Quarantine bypasses in outage mode. |
-| `single_endpoint_shadow_rotate_total` | `u64` | Shadow writer rotations. |
-| `single_endpoint_shadow_rotate_skipped_quarantine_total` | `u64` | Shadow rotations skipped because of quarantine. |
-| `floor_mode_switch_total` | `u64` | Total floor mode switches. |
-| `floor_mode_switch_static_to_adaptive_total` | `u64` | Static -> adaptive switches. |
-| `floor_mode_switch_adaptive_to_static_total` | `u64` | Adaptive -> static switches. |
-
-#### `ZeroCodeCount`
-| Field | Type | Description |
-| --- | --- | --- |
-| `code` | `i32` | Handshake error code. |
-| `total` | `u64` | Events with this code. |
-
-#### `ZeroPoolData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `pool_swap_total` | `u64` | Pool swap count. |
-| `pool_drain_active` | `u64` | Current active draining pools. |
-| `pool_force_close_total` | `u64` | Forced pool closes by timeout. |
-| `pool_stale_pick_total` | `u64` | Stale writer picks for binding. |
-| `writer_removed_total` | `u64` | Writer removals total. |
-| `writer_removed_unexpected_total` | `u64` | Unexpected writer removals. |
-| `refill_triggered_total` | `u64` | Refill triggers. |
-| `refill_skipped_inflight_total` | `u64` | Refill skipped because refill already in-flight. |
-| `refill_failed_total` | `u64` | Refill failures. |
-| `writer_restored_same_endpoint_total` | `u64` | Restores on same endpoint. |
-| `writer_restored_fallback_total` | `u64` | Restores on fallback endpoint. |
-
-#### `ZeroDesyncData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `secure_padding_invalid_total` | `u64` | Invalid secure padding events. |
-| `desync_total` | `u64` | Desync events total. |
-| `desync_full_logged_total` | `u64` | Fully logged desync events. |
-| `desync_suppressed_total` | `u64` | Suppressed desync logs. |
-| `desync_frames_bucket_0` | `u64` | Desync frames bucket 0. |
-| `desync_frames_bucket_1_2` | `u64` | Desync frames bucket 1-2. |
-| `desync_frames_bucket_3_10` | `u64` | Desync frames bucket 3-10. |
-| `desync_frames_bucket_gt_10` | `u64` | Desync frames bucket >10. |
-
-### `MinimalAllData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `enabled` | `bool` | Whether minimal runtime snapshots are enabled by config. |
-| `reason` | `string?` | `feature_disabled` or `source_unavailable` when applicable. |
-| `generated_at_epoch_secs` | `u64` | Snapshot generation time. |
-| `data` | `MinimalAllPayload?` | Null when disabled; fallback payload when source unavailable. |
-
-#### `MinimalAllPayload`
-| Field | Type | Description |
-| --- | --- | --- |
-| `me_writers` | `MeWritersData` | ME writer status block. |
-| `dcs` | `DcStatusData` | DC aggregate status block. |
-| `me_runtime` | `MinimalMeRuntimeData?` | Runtime ME control snapshot. |
-| `network_path` | `MinimalDcPathData[]` | Active IP path selection per DC. |
-
-#### `MinimalMeRuntimeData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `active_generation` | `u64` | Active pool generation. |
-| `warm_generation` | `u64` | Warm pool generation. |
-| `pending_hardswap_generation` | `u64` | Pending hardswap generation. |
-| `pending_hardswap_age_secs` | `u64?` | Pending hardswap age in seconds. |
-| `hardswap_enabled` | `bool` | Hardswap mode toggle. |
-| `floor_mode` | `string` | Writer floor mode. |
-| `adaptive_floor_idle_secs` | `u64` | Idle threshold for adaptive floor. |
-| `adaptive_floor_min_writers_single_endpoint` | `u8` | Minimum writers for single-endpoint DC in adaptive mode. |
-| `adaptive_floor_recover_grace_secs` | `u64` | Grace period for floor recovery. |
-| `me_keepalive_enabled` | `bool` | ME keepalive toggle. |
-| `me_keepalive_interval_secs` | `u64` | Keepalive period. |
-| `me_keepalive_jitter_secs` | `u64` | Keepalive jitter. |
-| `me_keepalive_payload_random` | `bool` | Randomized keepalive payload toggle. |
-| `rpc_proxy_req_every_secs` | `u64` | Period for RPC proxy request signal. |
-| `me_reconnect_max_concurrent_per_dc` | `u32` | Reconnect concurrency per DC. |
-| `me_reconnect_backoff_base_ms` | `u64` | Base reconnect backoff. |
-| `me_reconnect_backoff_cap_ms` | `u64` | Max reconnect backoff. |
-| `me_reconnect_fast_retry_count` | `u32` | Fast retry attempts before normal backoff. |
-| `me_pool_drain_ttl_secs` | `u64` | Pool drain TTL. |
-| `me_pool_force_close_secs` | `u64` | Hard close timeout for draining writers. |
-| `me_pool_min_fresh_ratio` | `f32` | Minimum fresh ratio before swap. |
-| `me_bind_stale_mode` | `string` | Stale writer bind policy. |
-| `me_bind_stale_ttl_secs` | `u64` | Stale writer TTL. |
-| `me_single_endpoint_shadow_writers` | `u8` | Shadow writers for single-endpoint DCs. |
-| `me_single_endpoint_outage_mode_enabled` | `bool` | Outage mode toggle for single-endpoint DCs. |
-| `me_single_endpoint_outage_disable_quarantine` | `bool` | Quarantine behavior in outage mode. |
-| `me_single_endpoint_outage_backoff_min_ms` | `u64` | Outage mode min reconnect backoff. |
-| `me_single_endpoint_outage_backoff_max_ms` | `u64` | Outage mode max reconnect backoff. |
-| `me_single_endpoint_shadow_rotate_every_secs` | `u64` | Shadow rotation interval. |
-| `me_deterministic_writer_sort` | `bool` | Deterministic writer ordering toggle. |
-| `me_socks_kdf_policy` | `string` | Current SOCKS KDF policy mode. |
-| `quarantined_endpoints_total` | `usize` | Total quarantined endpoints. |
-| `quarantined_endpoints` | `MinimalQuarantineData[]` | Quarantine details. |
-
-#### `MinimalQuarantineData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `endpoint` | `string` | Endpoint (`ip:port`). |
-| `remaining_ms` | `u64` | Remaining quarantine duration. |
-
-#### `MinimalDcPathData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `dc` | `i16` | Telegram DC identifier. |
-| `ip_preference` | `string?` | Runtime IP family preference. |
-| `selected_addr_v4` | `string?` | Selected IPv4 endpoint for this DC. |
-| `selected_addr_v6` | `string?` | Selected IPv6 endpoint for this DC. |
-
-### `MeWritersData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `middle_proxy_enabled` | `bool` | `false` when minimal runtime is disabled or source unavailable. |
-| `reason` | `string?` | `feature_disabled` or `source_unavailable` when not fully available. |
-| `generated_at_epoch_secs` | `u64` | Snapshot generation time. |
-| `summary` | `MeWritersSummary` | Coverage/availability summary. |
-| `writers` | `MeWriterStatus[]` | Per-writer statuses. |
-
-#### `MeWritersSummary`
-| Field | Type | Description |
-| --- | --- | --- |
-| `configured_dc_groups` | `usize` | Number of configured DC groups. |
-| `configured_endpoints` | `usize` | Total configured ME endpoints. |
-| `available_endpoints` | `usize` | Endpoints currently available. |
-| `available_pct` | `f64` | `available_endpoints / configured_endpoints * 100`. |
-| `required_writers` | `usize` | Required writers based on current floor policy. |
-| `alive_writers` | `usize` | Writers currently alive. |
-| `coverage_pct` | `f64` | `alive_writers / required_writers * 100`. |
-
-#### `MeWriterStatus`
-| Field | Type | Description |
-| --- | --- | --- |
-| `writer_id` | `u64` | Runtime writer identifier. |
-| `dc` | `i16?` | DC id if mapped. |
-| `endpoint` | `string` | Endpoint (`ip:port`). |
-| `generation` | `u64` | Pool generation owning this writer. |
-| `state` | `string` | Writer state (`warm`, `active`, `draining`). |
-| `draining` | `bool` | Draining flag. |
-| `degraded` | `bool` | Degraded flag. |
-| `bound_clients` | `usize` | Number of currently bound clients. |
-| `idle_for_secs` | `u64?` | Idle age in seconds if idle. |
-| `rtt_ema_ms` | `f64?` | RTT exponential moving average. |
-
-### `DcStatusData`
-| Field | Type | Description |
-| --- | --- | --- |
-| `middle_proxy_enabled` | `bool` | `false` when minimal runtime is disabled or source unavailable. |
-| `reason` | `string?` | `feature_disabled` or `source_unavailable` when not fully available. |
-| `generated_at_epoch_secs` | `u64` | Snapshot generation time. |
-| `dcs` | `DcStatus[]` | Per-DC status rows. |
-
-#### `DcStatus`
-| Field | Type | Description |
-| --- | --- | --- |
-| `dc` | `i16` | Telegram DC id. |
-| `endpoints` | `string[]` | Endpoints in this DC (`ip:port`). |
-| `available_endpoints` | `usize` | Endpoints currently available in this DC. |
-| `available_pct` | `f64` | `available_endpoints / endpoints_total * 100`. |
-| `required_writers` | `usize` | Required writer count for this DC. |
-| `alive_writers` | `usize` | Alive writers in this DC. |
-| `coverage_pct` | `f64` | `alive_writers / required_writers * 100`. |
-| `rtt_ms` | `f64?` | Aggregated RTT for DC. |
-| `load` | `usize` | Active client sessions bound to this DC. |
-
-### `UserInfo`
-| Field | Type | Description |
-| --- | --- | --- |
-| `username` | `string` | Username. |
-| `user_ad_tag` | `string?` | Optional ad tag (32 hex chars). |
-| `max_tcp_conns` | `usize?` | Optional max concurrent TCP limit. |
-| `expiration_rfc3339` | `string?` | Optional expiration timestamp. |
-| `data_quota_bytes` | `u64?` | Optional data quota. |
-| `max_unique_ips` | `usize?` | Optional unique IP limit. |
-| `current_connections` | `u64` | Current live connections. |
-| `active_unique_ips` | `usize` | Current active unique source IPs. |
-| `total_octets` | `u64` | Total traffic octets for this user. |
-| `links` | `UserLinks` | Active connection links derived from current config. |
-
-#### `UserLinks`
-| Field | Type | Description |
-| --- | --- | --- |
-| `classic` | `string[]` | Active `tg://proxy` links for classic mode. |
-| `secure` | `string[]` | Active `tg://proxy` links for secure/DD mode. |
-| `tls` | `string[]` | Active `tg://proxy` links for EE-TLS mode (for each host+TLS domain). |
-
-Link generation uses active config and enabled modes:
-- `[general.links].public_host/public_port` have priority.
-- If `public_host` is not set, startup-detected public IPs are used (`IPv4`, `IPv6`, or both when available).
-- Fallback host sources: listener `announce`, `announce_ip`, explicit listener `ip`.
-- Legacy fallback: `listen_addr_ipv4` and `listen_addr_ipv6` when routable.
-- Startup-detected IPs are fixed for process lifetime and refreshed on restart.
-- User rows are sorted by `username` in ascending lexical order.
-
-### `CreateUserResponse`
-| Field | Type | Description |
-| --- | --- | --- |
-| `user` | `UserInfo` | Created or updated user view. |
-| `secret` | `string` | Effective user secret. |
-
-## Mutation Semantics
-
-| Endpoint | Notes |
-| --- | --- |
-| `POST /v1/users` | Creates user and validates resulting config before atomic save. |
-| `PATCH /v1/users/{username}` | Partial update of provided fields only. Missing fields remain unchanged. |
-| `POST /v1/users/{username}/rotate-secret` | Currently returns `404` in runtime route matcher; request schema is reserved for intended behavior. |
-| `DELETE /v1/users/{username}` | Deletes user and related optional settings. Last user deletion is blocked. |
-
-All mutating endpoints:
-- Respect `read_only` mode.
-- Accept optional `If-Match` for optimistic concurrency.
-- Return new `revision` after successful write.
-- Use process-local mutation lock + atomic write (`tmp + rename`) for config persistence.
-
-## Runtime State Matrix
-
-| Endpoint | `minimal_runtime_enabled=false` | `minimal_runtime_enabled=true` + source unavailable | `minimal_runtime_enabled=true` + source available |
-| --- | --- | --- | --- |
-| `/v1/stats/minimal/all` | `enabled=false`, `reason=feature_disabled`, `data=null` | `enabled=true`, `reason=source_unavailable`, fallback `data` with disabled ME blocks | `enabled=true`, `reason` omitted, full payload |
-| `/v1/stats/me-writers` | `middle_proxy_enabled=false`, `reason=feature_disabled` | `middle_proxy_enabled=false`, `reason=source_unavailable` | `middle_proxy_enabled=true`, runtime snapshot |
-| `/v1/stats/dcs` | `middle_proxy_enabled=false`, `reason=feature_disabled` | `middle_proxy_enabled=false`, `reason=source_unavailable` | `middle_proxy_enabled=true`, runtime snapshot |
-| `/v1/stats/upstreams` | `enabled=false`, `reason=feature_disabled`, `summary/upstreams` omitted, `zero` still present | `enabled=true`, `reason=source_unavailable`, `summary/upstreams` omitted, `zero` present | `enabled=true`, `reason` omitted, `summary/upstreams` present, `zero` present |
-
-`source_unavailable` conditions:
-- ME endpoints: ME pool is absent (for example direct-only mode or failed ME initialization).
-- Upstreams endpoint: non-blocking upstream snapshot lock is unavailable at request time.
-
-## Serialization Rules
-
-- Success responses always include `revision`.
-- Error responses never include `revision`; they include `request_id`.
-- Optional fields with `skip_serializing_if` are omitted when absent.
-- Nullable payload fields may still be `null` where contract uses `?` (for example `UserInfo` option fields).
-- For `/v1/stats/upstreams`, authentication details of SOCKS upstreams are intentionally omitted.
-
-## Operational Notes
-
-| Topic | Details |
-| --- | --- |
-| API startup | API listener is spawned only when `[server.api].enabled=true`. |
-| `listen` port `0` | API spawn is skipped when parsed listen port is `0` (treated as disabled bind target). |
-| Bind failure | Failed API bind logs warning and API task exits (no auto-retry loop). |
-| ME runtime status endpoints | `/v1/stats/me-writers`, `/v1/stats/dcs`, `/v1/stats/minimal/all` require `[server.api].minimal_runtime_enabled=true`; otherwise they return disabled payload with `reason=feature_disabled`. |
-| Upstream runtime endpoint | `/v1/stats/upstreams` always returns `zero`, but runtime fields (`summary`, `upstreams`) require `[server.api].minimal_runtime_enabled=true`. |
-| Restart requirements | `server.api` changes are restart-required for predictable behavior. |
-| Hot-reload nuance | A pure `server.api`-only config change may not propagate through watcher broadcast; a mixed change (with hot fields) may propagate API flags while still warning that restart is required. |
-| Runtime apply path | Successful writes are picked up by existing config watcher/hot-reload path. |
-| Exposure | Built-in TLS/mTLS is not provided. Use loopback bind + reverse proxy if needed. |
-| Pagination | User list currently has no pagination/filtering. |
-| Serialization side effect | Config comments/manual formatting are not preserved on write. |
-
-## Known Limitations (Current Release)
-
-- `POST /v1/users/{username}/rotate-secret` is currently unreachable in route matcher and returns `404`.
-- API runtime controls under `server.api` are documented as restart-required; hot-reload behavior for these fields is not strictly uniform in all change combinations.

docs/Advanced_settings/TUNING.de.md

@@ -82,7 +82,7 @@ Die unten angegebenen `Default`-Werte sind Code-Defaults (bei fehlendem Schlüss
 
 | Feld | Gilt für | Typ | Pflicht | Default | Bedeutung |
 |---|---|---|---|---|---|
-| `[[upstreams]].type` | alle Upstreams | `"direct" \| "socks4" \| "socks5"` | ja | n/a | Upstream-Transporttyp. |
+| `[[upstreams]].type` | alle Upstreams | `"direct" \| "socks4" \| "socks5" \| "shadowsocks"` | ja | n/a | Upstream-Transporttyp. |
 | `[[upstreams]].weight` | alle Upstreams | `u16` | nein | `1` | Basisgewicht für weighted-random Auswahl. |
 | `[[upstreams]].enabled` | alle Upstreams | `bool` | nein | `true` | Deaktivierte Einträge werden beim Start ignoriert. |
 | `[[upstreams]].scopes` | alle Upstreams | `String` | nein | `""` | Komma-separierte Scope-Tags für Request-Routing. |
@@ -95,6 +95,8 @@ Die unten angegebenen `Default`-Werte sind Code-Defaults (bei fehlendem Schlüss
 | `interface` | `socks5` | `Option<String>` | nein | `null` | Wird nur genutzt, wenn `address` als `ip:port` angegeben ist. |
 | `username` | `socks5` | `Option<String>` | nein | `null` | SOCKS5 Benutzername. |
 | `password` | `socks5` | `Option<String>` | nein | `null` | SOCKS5 Passwort. |
+| `url` | `shadowsocks` | `String` | ja | n/a | Shadowsocks-SIP002-URL (`ss://...`). In Runtime-APIs wird nur `host:port` offengelegt. |
+| `interface` | `shadowsocks` | `Option<String>` | nein | `null` | Optionales ausgehendes Bind-Interface oder lokale Literal-IP. |
 
 ### Runtime-Regeln (wichtig)
 
@@ -115,6 +117,7 @@ Die unten angegebenen `Default`-Werte sind Code-Defaults (bei fehlendem Schlüss
 8. Im ME-Modus wird der gewählte Upstream auch für den ME-TCP-Dial-Pfad verwendet.
 9. Im ME-Modus ist bei `direct` mit bind/interface die STUN-Reflection bind-aware für KDF-Adressmaterial.
 10. Im ME-Modus werden bei SOCKS-Upstream `BND.ADDR/BND.PORT` für KDF verwendet, wenn gültig/öffentlich und gleiche IP-Familie.
+11. `shadowsocks`-Upstreams erfordern `general.use_middle_proxy = false`. Mit aktiviertem ME-Modus schlägt das Laden der Config sofort fehl.
 
 ## Upstream-Konfigurationsbeispiele
 
@@ -150,7 +153,20 @@ weight = 2
 enabled = true
 ```
 
-### Beispiel 4: Gemischte Upstreams mit Scopes
+### Beispiel 4: Shadowsocks-Upstream
+
+```toml
+[general]
+use_middle_proxy = false
+
+[[upstreams]]
+type = "shadowsocks"
+url = "ss://2022-blake3-aes-256-gcm:BASE64_KEY@198.51.100.50:8388"
+weight = 2
+enabled = true
+```
+
+### Beispiel 5: Gemischte Upstreams mit Scopes
 
 ```toml
 [[upstreams]]

docs/Advanced_settings/TUNING.en.md

@@ -82,7 +82,7 @@ Defaults below are code defaults (used when a key is omitted), not necessarily v
 
 | Field | Applies to | Type | Required | Default | Meaning |
 |---|---|---|---|---|---|
-| `[[upstreams]].type` | all upstreams | `"direct" \| "socks4" \| "socks5"` | yes | n/a | Upstream transport type. |
+| `[[upstreams]].type` | all upstreams | `"direct" \| "socks4" \| "socks5" \| "shadowsocks"` | yes | n/a | Upstream transport type. |
 | `[[upstreams]].weight` | all upstreams | `u16` | no | `1` | Base weight for weighted-random selection. |
 | `[[upstreams]].enabled` | all upstreams | `bool` | no | `true` | Disabled entries are ignored at startup. |
 | `[[upstreams]].scopes` | all upstreams | `String` | no | `""` | Comma-separated scope tags for request-level routing. |
@@ -95,6 +95,8 @@ Defaults below are code defaults (used when a key is omitted), not necessarily v
 | `interface` | `socks5` | `Option<String>` | no | `null` | Used only for SOCKS server `ip:port` dial path. |
 | `username` | `socks5` | `Option<String>` | no | `null` | SOCKS5 username auth. |
 | `password` | `socks5` | `Option<String>` | no | `null` | SOCKS5 password auth. |
+| `url` | `shadowsocks` | `String` | yes | n/a | Shadowsocks SIP002 URL (`ss://...`). Only `host:port` is exposed in runtime APIs. |
+| `interface` | `shadowsocks` | `Option<String>` | no | `null` | Optional outgoing bind interface or literal local IP. |
 
 ### Runtime rules (important)
 
@@ -115,6 +117,7 @@ Defaults below are code defaults (used when a key is omitted), not necessarily v
 8. In ME mode, the selected upstream is also used for ME TCP dial path.
 9. In ME mode for `direct` upstream with bind/interface, STUN reflection logic is bind-aware for KDF source material.
 10. In ME mode for SOCKS upstream, SOCKS `BND.ADDR/BND.PORT` is used for KDF when it is valid/public for the same family.
+11. `shadowsocks` upstreams require `general.use_middle_proxy = false`. Config load fails fast if ME mode is enabled.
 
 ## Upstream Configuration Examples
 
@@ -150,7 +153,20 @@ weight = 2
 enabled = true
 ```
 
-### Example 4: Mixed upstreams with scopes
+### Example 4: Shadowsocks upstream
+
+```toml
+[general]
+use_middle_proxy = false
+
+[[upstreams]]
+type = "shadowsocks"
+url = "ss://2022-blake3-aes-256-gcm:BASE64_KEY@198.51.100.50:8388"
+weight = 2
+enabled = true
+```
+
+### Example 5: Mixed upstreams with scopes
 
 ```toml
 [[upstreams]]

docs/Advanced_settings/TUNING.ru.md

@@ -82,7 +82,7 @@
 
 | Поле | Применимость | Тип | Обязательно | Default | Назначение |
 |---|---|---|---|---|---|
-| `[[upstreams]].type` | все upstream | `"direct" \| "socks4" \| "socks5"` | да | n/a | Тип upstream транспорта. |
+| `[[upstreams]].type` | все upstream | `"direct" \| "socks4" \| "socks5" \| "shadowsocks"` | да | n/a | Тип upstream транспорта. |
 | `[[upstreams]].weight` | все upstream | `u16` | нет | `1` | Базовый вес в weighted-random выборе. |
 | `[[upstreams]].enabled` | все upstream | `bool` | нет | `true` | Выключенные записи игнорируются на старте. |
 | `[[upstreams]].scopes` | все upstream | `String` | нет | `""` | Список scope-токенов через запятую для маршрутизации. |
@@ -95,6 +95,8 @@
 | `interface` | `socks5` | `Option<String>` | нет | `null` | Используется только если `address` задан как `ip:port`. |
 | `username` | `socks5` | `Option<String>` | нет | `null` | Логин SOCKS5 auth. |
 | `password` | `socks5` | `Option<String>` | нет | `null` | Пароль SOCKS5 auth. |
+| `url` | `shadowsocks` | `String` | да | n/a | Shadowsocks SIP002 URL (`ss://...`). В runtime API раскрывается только `host:port`. |
+| `interface` | `shadowsocks` | `Option<String>` | нет | `null` | Необязательный исходящий bind-интерфейс или literal локальный IP. |
 
 ### Runtime-правила
 
@@ -115,6 +117,7 @@
 8. В ME-режиме выбранный upstream также используется для ME TCP dial path.
 9. В ME-режиме для `direct` upstream с bind/interface STUN-рефлексия выполняется bind-aware для KDF материала.
 10. В ME-режиме для SOCKS upstream используются `BND.ADDR/BND.PORT` для KDF, если адрес валиден/публичен и соответствует IP family.
+11. `shadowsocks` upstream требует `general.use_middle_proxy = false`. При включенном ME-режиме конфиг отклоняется при загрузке.
 
 ## Примеры конфигурации Upstreams
 
@@ -150,7 +153,20 @@ weight = 2
 enabled = true
 ```
 
-### Пример 4: смешанные upstream с scopes
+### Пример 4: Shadowsocks upstream
+
+```toml
+[general]
+use_middle_proxy = false
+
+[[upstreams]]
+type = "shadowsocks"
+url = "ss://2022-blake3-aes-256-gcm:BASE64_KEY@198.51.100.50:8388"
+weight = 2
+enabled = true
+```
+
+### Пример 5: смешанные upstream с scopes
 
 ```toml
 [[upstreams]]

docs/Architecture/Fronting-splitting/TLS-F-TCP-S.ru.md

@@ -0,0 +1,278 @@
+# TLS-F и TCP-S в Telemt
+
+## Общая архитектура
+
+**Telemt** - это прежде всего реализация **MTProxy**, через которую проходит payload Telegram
+
+Подсистема **TLS-Fronting / TCP-Splitting** служит **маскировочным транспортным слоем**, задача которого - сделать MTProxy-соединение внешне похожим на обычное TLS-подключение к легитимному сайту
+
+Таким образом:
+
+- **MTProxy** - основной функциональный слой Telemt для обработки Telegram-трафика
+- **TLS-Fronting / TCP-Splitting** - подсистема маскировки транспорта
+
+С точки зрения сети Telemt ведёт себя как **TLS-сервер**, но фактически:
+
+- валидные MTProxy-клиенты остаются внутри контура Telemt
+- любые другие TLS-клиенты проксируются на обычный HTTPS-сервер-заглушку
+
+# Базовый сценарий / Best-practice
+
+Предположим, у вас есть домен:
+
+```
+umweltschutz.de
+```
+
+### 1 DNS
+
+Вы создаёте A-запись:
+
+```
+umweltschutz.de -> A-запись 198.18.88.88
+```
+
+где `198.18.88.88` - IP вашего сервера с telemt
+
+### 2 TLS-домен
+
+В конфигурации Telemt:
+
+```toml
+[censorship]
+tls_domain = "umweltschutz.de"
+```
+
+Этот домен используется клиентом как SNI в ClientHello
+
+### 3 Сервер-заглушка
+
+Вы поднимаете обычный HTTPS-сервер, например **nginx**, с сертификатом для этого домена.
+
+Он может работать:
+
+- на том же сервере
+- на другом сервере
+- на другом порту
+
+В конфигурации Telemt:
+
+```toml
+[censorship]
+mask_host = "127.0.0.1"
+mask_port = 8443
+```
+
+где `127.0.0.1` - IP сервера-заглушки, а 8443 - порт, который он слушает
+
+Этот сервер нужен **для обработки любых non-MTProxy запросов**
+
+### 4 Работа Telemt
+
+После запуска Telemt действует следующим образом:
+
+1) принимает входящее TCP-соединение
+2) анализирует TLS-ClientHello
+3) пытается определить, является ли соединение валидным **MTProxy FakeTLS**
+
+Далее работают два варианта логики:
+
+---
+
+# Сценарий 1 - MTProxy клиент с валидным ключом
+
+Если клиент предъявил **валидный MTProxy-ключ**:
+
+- соединение **остаётся внутри Telemt**
+- TLS используется только как **транспортная маскировка**
+- далее запускается обычная логика **MTProxy**
+
+Для внешнего наблюдателя это выглядит как:
+
+```
+TLS connection -> umweltschutz.de
+```
+
+Хотя внутри передаётся **MTProto-трафик Telegram**
+
+# Сценарий 2 - обычный TLS-клиент - crawler / scanner / browser
+
+Если Telemt не обнаруживает валидный MTProxy-ключ:
+
+соединение **переключается в режим TCP-Splitting / TCP-Splicing**.
+
+В этом режиме Telemt:
+
+1. открывает новое TCP-соединение к
+
+```
+mask_host:mask_port
+```
+
+2. начинает **проксировать TCP-трафик**
+
+Важно:
+
+* клиентский TLS-запрос **НЕ модифицируется**
+* **ClientHello передаётся "как есть", без изменений**
+* **SNI остаётся неизменным**
+* Telemt **не завершает TLS-рукопожатие**, а только перенаправляет его на более низком уровне сетевого стека - L4
+
+Таким образом upstream-сервер получает **оригинальное TLS-соединение клиента**:
+
+- если это nginx-заглушка, он просто отдаёт обычный сайт
+- для внешнего наблюдателя это выглядит как обычный HTTPS-сервер
+
+# TCP-S / TCP-Splitting / TCP-Splicing
+
+Ключевые свойства механизма:
+
+**Telemt работает как TCP-переключатель:**
+
+1) принимает соединение
+2️) определяет тип клиента
+3) либо:
+
+- обрабатывает MTProxy внутри
+- либо проксирует TCP-поток
+
+При проксировании:
+
+- Telemt **разрешает `mask_host` в IP**
+- устанавливает TCP-соединение
+- начинает **bidirectional TCP relay**
+
+При этом:
+
+- TLS-рукопожатие происходит **между клиентом и `mask_host`**
+- Telemt выступает только **на уровне L4 - как TCP-релей**, такой же как HAProxy в TCP-режиме
+
+# Использование чужого домена
+
+Можно использовать и внешний сайт.
+
+Например:
+
+```toml
+[censorship]
+tls_domain = "github.com"
+mask_host = "github.com"
+mask_port = 443
+```
+
+или
+
+```toml
+[censorship]
+mask_host = "140.82.121.4"
+```
+
+В этом случае:
+
+- цензор видит **TLS-подключение к github.com**
+- обычные клиенты/краулер действительно получают **настоящий GitHub**
+
+Telemt просто **проксирует TCP-соединение на GitHub**
+
+# Что видит анализатор трафика?
+
+Для DPI это выглядит так:
+
+```
+client -> TLS -> github.com
+```
+
+или
+
+```
+client -> TLS -> umweltschutz.de
+```
+
+TLS-handshake выглядит валидным, SNI соответствует домену, сертификат корректный - от целевого `mask_host:mask_port`
+
+# Что видит сканер / краулер?
+
+Если сканер попытается подключиться:
+
+```
+openssl s_client -connect 198.18.88.88:443 -servername umweltschutz.de
+```
+
+он получит **обычный HTTPS-сайт-заглушку**
+
+Потому что:
+
+- он не предъявил MTProxy-ключ
+- Telemt отправил соединение на `mask_host:mask_port`, на котором находится nginx 
+
+# Какую проблему решает TLS-Fronting / TCP-Splitting?
+
+Эта архитектура решает сразу несколько проблем обхода цензуры.
+
+## 1 Закрытие плоскости MTProxy от активного сканирования
+
+Многие цензоры:
+
+- сканируют IP-адреса
+- проверяют известные сигнатуры прокси
+
+Telemt отвечает на такие проверки **обычным HTTPS-сайтом**, поэтому прокси невозможно обнаружить простым сканированием
+
+---
+
+## 2 Маскировка трафика под легитимный TLS
+
+Для DPI-систем соединение выглядит как:
+
+```
+обычный TLS-трафик к популярному домену
+```
+
+Это делает блокировку значительно сложнее и непредсказуемее
+
+---
+
+## 3 Устойчивость к протокольному анализу
+
+MTProxy трафик проходит **внутри TLS-like-потока**, поэтому:
+
+- не видны характерные сигнатуры MTProto
+- соединение выглядит как обычный HTTPS
+
+---
+
+## 4 Правдоподобное поведение сервера
+
+Даже если краулер:
+
+- подключится сам
+- выполнит TLS-handshake
+- попытается получить HTTP-ответ
+
+он увидит **реальный сайт**, а не telemt
+
+Это устраняет один из главных признаков для антифрод-краулеров мобильных операторов
+
+# Схема
+
+```text
+			Client
+			  │
+			  │ TCP
+			  │
+			  V
+			Telemt
+			  │
+			  ├── valid MTProxy key
+			  │        │
+			  │        V
+			  │     MTProxy logic
+			  │
+			  └── обычный TLS клиент
+			  │
+			  V
+		 TCP-Splitting
+			  │
+			  V
+	  mask_host:mask_port
+```

docs/Architecture/Model/MODEL.en.md

@@ -0,0 +1,285 @@
+# Telemt Runtime Model
+
+## Scope
+This document defines runtime concepts used by the Middle-End (ME) transport pipeline and the orchestration logic around it.
+
+It focuses on:
+- `ME Pool / Reader / Writer / Refill / Registry`
+- `Adaptive Floor`
+- `Trio-State`
+- `Generation Lifecycle`
+
+## Core Entities
+
+### ME Pool
+`ME Pool` is the runtime orchestrator for all Middle-End writers.
+
+Responsibilities:
+- Holds writer inventory by DC/family/endpoint.
+- Maintains routing primitives and writer selection policy.
+- Tracks generation state (`active`, `warm`, `draining` context).
+- Applies runtime policies (floor mode, refill, reconnect, reinit, fallback behavior).
+- Exposes readiness gates used by admission logic (for conditional accept/cast behavior).
+
+Non-goals:
+- It does not own client protocol decoding.
+- It does not own per-client business policy (quotas/limits).
+
+### ME Writer
+`ME Writer` is a long-lived ME RPC tunnel bound to one concrete ME endpoint (`ip:port`), with:
+- Outbound command channel (send path).
+- Associated reader loop (inbound path).
+- Health/degraded flags.
+- Contour/state and generation metadata.
+
+A writer is the actual data plane carrier for client sessions once bound.
+
+### ME Reader
+`ME Reader` is the inbound parser/dispatcher for one writer:
+- Reads/decrypts ME RPC frames.
+- Validates sequence/checksum.
+- Routes payloads to client-connection channels via `Registry`.
+- Emits close/ack/data events and updates telemetry.
+
+Design intent:
+- Reader must stay non-blocking as much as possible.
+- Backpressure on a single client route must not stall the whole writer stream.
+
+### Refill
+`Refill` is the recovery mechanism that restores writer coverage when capacity drops:
+- Per-endpoint restore (same endpoint first).
+- Per-DC restore to satisfy required floor.
+- Optional outage-mode/shadow behavior for fragile single-endpoint DCs.
+
+Refill works asynchronously and should not block hot routing paths.
+
+### Registry
+`Registry` is the routing index between ME and client sessions:
+- `conn_id -> client response channel`
+- `conn_id <-> writer_id` binding map
+- writer activity snapshots and idle tracking
+
+Main invariants:
+- A `conn_id` routes to at most one active response channel.
+- Writer loss triggers safe unbind/cleanup and close propagation.
+- Registry state is the source of truth for active ME-bound session mapping.
+
+## Adaptive Floor
+
+### What it is
+`Adaptive Floor` is a runtime policy that changes target writer count per DC based on observed activity, instead of always holding static peak floor.
+
+### Why it exists
+Goals:
+- Reduce idle writer churn under low traffic.
+- Keep enough warm capacity to avoid client-visible stalls on burst recovery.
+- Limit needless reconnect storms on unstable endpoints.
+
+### Behavioral model
+- Under activity: floor converges toward configured static requirement.
+- Under prolonged idle: floor can shrink to a safe minimum.
+- Recovery/grace windows prevent aggressive oscillation.
+
+### Safety constraints
+- Never violate minimal survivability floor for a DC group.
+- Refill must still restore quickly on demand.
+- Floor adaptation must not force-drop already bound healthy sessions.
+
+## Trio-State
+
+`Trio-State` is writer contouring:
+- `Warm`
+- `Active`
+- `Draining`
+
+### State semantics
+- `Warm`: connected and validated, not primary for new binds.
+- `Active`: preferred for new binds and normal traffic.
+- `Draining`: no new regular binds; existing sessions continue until graceful retirement rules apply.
+
+### Transition intent
+- `Warm -> Active`: when coverage/readiness conditions are satisfied.
+- `Active -> Draining`: on generation swap, endpoint replacement, or controlled retirement.
+- `Draining -> removed`: after drain TTL/force-close policy (or when naturally empty).
+
+This separation reduces SPOF and keeps cutovers predictable.
+
+## Generation Lifecycle
+
+Generation isolates pool epochs during reinit/reconfiguration.
+
+### Lifecycle phases
+1. `Bootstrap`: initial writers are established.
+2. `Warmup`: next generation writers are created and validated.
+3. `Activation`: generation promoted to active when coverage gate passes.
+4. `Drain`: previous generation becomes draining, existing sessions are allowed to finish.
+5. `Retire`: old generation writers are removed after graceful rules.
+
+### Operational guarantees
+- No partial generation activation without minimum coverage.
+- Existing healthy client sessions should not be dropped just because a new generation appears.
+- Draining generation exists to absorb in-flight traffic during swap.
+
+### Readiness and admission
+Pool readiness is not equivalent to “all endpoints fully saturated”.
+Typical gating strategy:
+- Open admission when per-DC minimal alive coverage exists.
+- Continue background saturation for multi-endpoint DCs.
+
+This keeps startup latency low while preserving eventual full capacity.
+
+## Interactions Between Concepts
+
+- `Generation` defines pool epochs.
+- `Trio-State` defines per-writer role inside/around those epochs.
+- `Adaptive Floor` defines how much capacity should be maintained right now.
+- `Refill` is the actuator that closes the gap between desired and current capacity.
+- `Registry` keeps per-session routing correctness while all of the above changes over time.
+
+## Architectural Approach
+
+### Layered Design
+The runtime is intentionally split into two planes:
+- `Control Plane`: decides desired topology and policy (`floor`, `generation swap`, `refill`, `fallback`).
+- `Data Plane`: executes packet/session transport (`reader`, `writer`, routing, acks, close propagation).
+
+Architectural rule:
+- Control Plane may change writer inventory and policy.
+- Data Plane must remain stable and low-latency while those changes happen.
+
+### Ownership Model
+Ownership is centered around explicit state domains:
+- `MePool` owns writer lifecycle and policy state.
+- `Registry` owns per-connection routing bindings.
+- `Writer task` owns outbound ME socket send progression.
+- `Reader task` owns inbound ME socket parsing and event dispatch.
+
+This prevents accidental cross-layer mutation and keeps invariants local.
+
+### Control Plane Responsibilities
+Control Plane is event-driven and policy-driven:
+- Startup initialization and readiness gates.
+- Runtime reinit (periodic or config-triggered).
+- Coverage checks per DC/family/endpoint group.
+- Floor enforcement (static/adaptive).
+- Refill scheduling and retry orchestration.
+- Generation transition (`warm -> active`, previous `active -> draining`).
+
+Control Plane must prioritize determinism over short-term aggressiveness.
+
+### Data Plane Responsibilities
+Data Plane is throughput-first and allocation-sensitive:
+- Session bind to writer.
+- Per-frame parsing/validation and dispatch.
+- Ack and close signal propagation.
+- Route drop behavior under missing connection or closed channel.
+- Minimal critical logging in hot path.
+
+Data Plane should avoid waiting on operations that are not strictly required for frame correctness.
+
+## Concurrency and Synchronization
+
+### Concurrency Principles
+- Per-writer isolation: each writer has independent send/read task loops.
+- Per-connection isolation: client channel state is scoped by `conn_id`.
+- Asynchronous recovery: refill/reconnect runs outside the packet hot path.
+
+### Synchronization Strategy
+- Shared maps use fine-grained, short-lived locking.
+- Read-mostly paths avoid broad write-lock windows.
+- Backpressure decisions are localized at route/channel boundary.
+
+Design target:
+- A slow consumer should degrade only itself (or its route), not global writer progress.
+
+### Cancellation and Shutdown
+Writer and reader loops are cancellation-aware:
+- explicit cancel token / close command support;
+- safe unbind and cleanup via registry;
+- deterministic order: stop admission -> drain/close -> release resources.
+
+## Consistency Model
+
+### Session Consistency
+For one `conn_id`:
+- exactly one active route target at a time;
+- close and unbind must be idempotent;
+- writer loss must not leave dangling bindings.
+
+### Generation Consistency
+Generational consistency guarantees:
+- New generation is not promoted before minimum coverage gate.
+- Previous generation remains available in `draining` state during handover.
+- Forced retirement is policy-bound (`drain ttl`, optional force-close), not immediate.
+
+### Policy Consistency
+Policy changes (`adaptive/static floor`, fallback mode, retries) should apply without violating established active-session routing invariants.
+
+## Backpressure and Flow Control
+
+### Route-Level Backpressure
+Route channels are bounded by design.
+When pressure increases:
+- short burst absorption is allowed;
+- prolonged congestion triggers controlled drop semantics;
+- drop accounting is explicit via metrics/counters.
+
+### Reader Non-Blocking Priority
+Inbound ME reader path should never be serialized behind one congested client route.
+Practical implication:
+- prefer non-blocking route attempt in the parser loop;
+- move heavy recovery to async side paths.
+
+## Failure Domain Strategy
+
+### Endpoint-Level Failure
+Failure of one endpoint should trigger endpoint-scoped recovery first:
+- same endpoint reconnect;
+- endpoint replacement within same DC group if applicable.
+
+### DC-Level Degradation
+If a DC group cannot satisfy floor:
+- keep service via remaining coverage if policy allows;
+- continue asynchronous refill saturation in background.
+
+### Whole-Pool Readiness Loss
+If no sufficient ME coverage exists:
+- admission gate can hold new accepts (conditional policy);
+- existing sessions should continue when their path remains healthy.
+
+## Performance Architecture Notes
+
+### Hotpath Discipline
+Allowed in hotpath:
+- fixed-size parsing and cheap validation;
+- bounded channel operations;
+- precomputed or low-allocation access patterns.
+
+Avoid in hotpath:
+- repeated expensive decoding;
+- broad locks with awaits inside critical sections;
+- verbose high-frequency logging.
+
+### Throughput Stability Over Peak Spikes
+Architecture prefers stable throughput and predictable latency over short peak gains that increase churn or long-tail reconnect times.
+
+## Evolution and Extension Rules
+
+To evolve this model safely:
+- Add new policy knobs in Control Plane first.
+- Keep Data Plane contracts stable (`conn_id`, route semantics, close semantics).
+- Validate generation and registry invariants before enabling by default.
+- Introduce new retry/recovery strategies behind explicit config.
+
+## Failure and Recovery Notes
+
+- Single-endpoint DC failure is a normal degraded mode case; policy should prioritize fast reconnect and optional shadow/probing strategies.
+- Idle close by peer should be treated as expected when upstream enforces idle timeout.
+- Reconnect backoff must protect against synchronized churn while still allowing fast first retries.
+- Fallback (`ME -> direct DC`) is a policy switch, not a transport bug by itself.
+
+## Terminology Summary
+- `Coverage`: enough live writers to satisfy per-DC acceptance policy.
+- `Floor`: target minimum writer count policy.
+- `Churn`: frequent writer reconnect/remove cycles.
+- `Hotpath`: per-packet/per-connection data path where extra waits/allocations are expensive.

docs/Architecture/Model/MODEL.ru.md

@@ -0,0 +1,285 @@
+# Runtime-модель Telemt
+
+## Область описания
+Документ фиксирует ключевые runtime-понятия пайплайна Middle-End (ME) и оркестрации вокруг него.
+
+Фокус:
+- `ME Pool / Reader / Writer / Refill / Registry`
+- `Adaptive Floor`
+- `Trio-State`
+- `Generation Lifecycle`
+
+## Базовые сущности
+
+### ME Pool
+`ME Pool` — центральный оркестратор всех Middle-End writer-ов.
+
+Зона ответственности:
+- хранит инвентарь writer-ов по DC/family/endpoint;
+- управляет выбором writer-а и маршрутизацией;
+- ведёт состояние поколений (`active`, `warm`, `draining` контекст);
+- применяет runtime-политики (floor, refill, reconnect, reinit, fallback);
+- отдаёт сигналы готовности для admission-логики (conditional accept/cast).
+
+Что не делает:
+- не декодирует клиентский протокол;
+- не реализует бизнес-политику пользователя (квоты/лимиты).
+
+### ME Writer
+`ME Writer` — долгоживущий ME RPC-канал к конкретному endpoint (`ip:port`), у которого есть:
+- канал команд на отправку;
+- связанный reader loop для входящего потока;
+- флаги состояния/деградации;
+- метаданные contour/state и generation.
+
+Writer — это фактический data-plane носитель клиентских сессий после бинда.
+
+### ME Reader
+`ME Reader` — входной parser/dispatcher одного writer-а:
+- читает и расшифровывает ME RPC-фреймы;
+- проверяет sequence/checksum;
+- маршрутизирует payload в client-каналы через `Registry`;
+- обрабатывает close/ack/data и обновляет телеметрию.
+
+Инженерный принцип:
+- Reader должен оставаться неблокирующим.
+- Backpressure одной клиентской сессии не должен останавливать весь поток writer-а.
+
+### Refill
+`Refill` — механизм восстановления покрытия writer-ов при просадке:
+- восстановление на том же endpoint в первую очередь;
+- восстановление по DC до требуемого floor;
+- опциональные outage/shadow-режимы для хрупких single-endpoint DC.
+
+Refill работает асинхронно и не должен блокировать hotpath.
+
+### Registry
+`Registry` — маршрутизационный индекс между ME и клиентскими сессиями:
+- `conn_id -> канал ответа клиенту`;
+- map биндов `conn_id <-> writer_id`;
+- снимки активности writer-ов и idle-трекинг.
+
+Ключевые инварианты:
+- один `conn_id` маршрутизируется максимум в один активный канал ответа;
+- потеря writer-а приводит к безопасному unbind/cleanup и отправке close;
+- именно `Registry` является источником истины по активным ME-биндам.
+
+## Adaptive Floor
+
+### Что это
+`Adaptive Floor` — runtime-политика, которая динамически меняет целевое число writer-ов на DC в зависимости от активности, а не держит всегда фиксированный статический floor.
+
+### Зачем
+Цели:
+- уменьшить churn на idle-трафике;
+- сохранить достаточную прогретую ёмкость для быстрых всплесков;
+- снизить лишние reconnect-штормы на нестабильных endpoint.
+
+### Модель поведения
+- при активности floor стремится к статическому требованию;
+- при длительном idle floor может снижаться до безопасного минимума;
+- grace/recovery окна не дают системе "флапать" слишком резко.
+
+### Ограничения безопасности
+- нельзя нарушать минимальный floor выживаемости DC-группы;
+- refill обязан быстро нарастить покрытие по запросу;
+- адаптация не должна принудительно ронять уже привязанные healthy-сессии.
+
+## Trio-State
+
+`Trio-State` — контурная роль writer-а:
+- `Warm`
+- `Active`
+- `Draining`
+
+### Семантика состояний
+- `Warm`: writer подключён и валиден, но не основной для новых биндов.
+- `Active`: приоритетный для новых биндов и обычного трафика.
+- `Draining`: новые обычные бинды не назначаются; текущие сессии живут до правил graceful-вывода.
+
+### Логика переходов
+- `Warm -> Active`: когда достигнуты условия покрытия/готовности.
+- `Active -> Draining`: при swap поколения, замене endpoint или контролируемом выводе.
+- `Draining -> removed`: после drain TTL/force-close политики (или естественного опустошения).
+
+Такое разделение снижает SPOF-риски и делает cutover предсказуемым.
+
+## Generation Lifecycle
+
+Generation изолирует эпохи пула при reinit/reconfiguration.
+
+### Фазы жизненного цикла
+1. `Bootstrap`: поднимается начальный набор writer-ов.
+2. `Warmup`: создаётся и валидируется новое поколение.
+3. `Activation`: новое поколение становится active после прохождения coverage-gate.
+4. `Drain`: предыдущее поколение переводится в draining, текущим сессиям дают завершиться.
+5. `Retire`: старое поколение удаляется по graceful-правилам.
+
+### Операционные гарантии
+- нельзя активировать поколение частично без минимального покрытия;
+- healthy-клиенты не должны теряться только из-за появления нового поколения;
+- draining-поколение служит буфером для in-flight трафика во время swap.
+
+### Готовность и приём клиентов
+Готовность пула не равна "все endpoint полностью насыщены".
+Типичная стратегия:
+- открыть admission при минимально достаточном alive-покрытии по DC;
+- параллельно продолжать saturation для multi-endpoint DC.
+
+Это уменьшает startup latency и сохраняет выход на полную ёмкость.
+
+## Как понятия связаны между собой
+
+- `Generation` задаёт эпохи пула.
+- `Trio-State` задаёт роль каждого writer-а внутри/между эпохами.
+- `Adaptive Floor` задаёт, сколько ёмкости нужно сейчас.
+- `Refill` — исполнитель, который закрывает разницу между desired и current capacity.
+- `Registry` гарантирует корректную маршрутизацию сессий, пока всё выше меняется.
+
+## Архитектурный подход
+
+### Слоистая модель
+Runtime специально разделён на две плоскости:
+- `Control Plane`: принимает решения о целевой топологии и политиках (`floor`, `generation swap`, `refill`, `fallback`).
+- `Data Plane`: исполняет транспорт сессий и пакетов (`reader`, `writer`, маршрутизация, ack, close).
+
+Ключевое правило:
+- Control Plane может менять состав writer-ов и policy.
+- Data Plane должен оставаться стабильным и низколатентным в момент этих изменений.
+
+### Модель владения состоянием
+Владение разделено по доменам:
+- `MePool` владеет жизненным циклом writer-ов и policy-state.
+- `Registry` владеет routing-биндами клиентских сессий.
+- `Writer task` владеет исходящей прогрессией ME-сокета.
+- `Reader task` владеет входящим парсингом и dispatch-событиями.
+
+Это ограничивает побочные мутации и локализует инварианты.
+
+### Обязанности Control Plane
+Control Plane работает событийно и policy-ориентированно:
+- стартовая инициализация и readiness-gate;
+- runtime reinit (периодический и/или по изменению конфигурации);
+- проверки покрытия по DC/family/endpoint group;
+- применение floor-политики (static/adaptive);
+- планирование refill и orchestration retry;
+- переходы поколений (`warm -> active`, прежний `active -> draining`).
+
+Для него важнее детерминизм, чем агрессивная краткосрочная реакция.
+
+### Обязанности Data Plane
+Data Plane ориентирован на пропускную способность и предсказуемую задержку:
+- bind клиентской сессии к writer-у;
+- per-frame parsing/validation/dispatch;
+- распространение ack/close;
+- корректная реакция на missing conn/closed channel;
+- минимальный лог-шум в hotpath.
+
+Data Plane не должен ждать операций, не критичных для корректности текущего фрейма.
+
+## Конкурентность и синхронизация
+
+### Принципы конкурентности
+- Изоляция по writer-у: у каждого writer-а независимые send/read loop.
+- Изоляция по сессии: состояние канала локально для `conn_id`.
+- Асинхронное восстановление: refill/reconnect выполняются вне пакетного hotpath.
+
+### Стратегия синхронизации
+- Для shared map используются короткие и узкие lock-секции.
+- Read-heavy пути избегают длительных write-lock окон.
+- Решения по backpressure локализованы на границе route/channel.
+
+Цель:
+- медленный consumer должен деградировать локально, не останавливая глобальный прогресс writer-а.
+
+### Cancellation и shutdown
+Reader/Writer loop должны быть cancellation-aware:
+- явные cancel token / close command;
+- безопасный unbind/cleanup через registry;
+- детерминированный порядок: stop admission -> drain/close -> release resources.
+
+## Модель согласованности
+
+### Согласованность сессии
+Для одного `conn_id`:
+- одновременно ровно один активный route-target;
+- close/unbind операции идемпотентны;
+- потеря writer-а не оставляет dangling-бинды.
+
+### Согласованность поколения
+Гарантии generation:
+- новое поколение не активируется до прохождения минимального coverage-gate;
+- предыдущее поколение остаётся в `draining` на время handover;
+- принудительный вывод writer-ов ограничен policy (`drain ttl`, optional force-close), а не мгновенный.
+
+### Согласованность политик
+Изменение policy (`adaptive/static floor`, fallback mode, retries) не должно ломать инварианты маршрутизации уже активных сессий.
+
+## Backpressure и управление потоком
+
+### Route-level backpressure
+Route-каналы намеренно bounded.
+При росте нагрузки:
+- кратковременный burst поглощается;
+- длительная перегрузка переходит в контролируемую drop-семантику;
+- все drop-сценарии должны быть прозрачно видны в метриках.
+
+### Приоритет неблокирующего Reader
+Входящий ME-reader path не должен сериализоваться из-за одной перегруженной клиентской сессии.
+Практически это означает:
+- использовать неблокирующую попытку route в parser loop;
+- выносить тяжёлое восстановление в асинхронные side-path.
+
+## Стратегия доменов отказа
+
+### Отказ отдельного endpoint
+Сначала применяется endpoint-local recovery:
+- reconnect в тот же endpoint;
+- затем замена endpoint внутри той же DC-группы (если доступно).
+
+### Деградация уровня DC
+Если DC-группа не набирает floor:
+- сервис сохраняется на остаточном покрытии (если policy разрешает);
+- saturation refill продолжается асинхронно в фоне.
+
+### Потеря готовности всего пула
+Если достаточного ME-покрытия нет:
+- admission gate может временно закрыть приём новых подключений (conditional policy);
+- уже активные сессии продолжают работать, пока их маршрут остаётся healthy.
+
+## Архитектурные заметки по производительности
+
+### Дисциплина hotpath
+Допустимо в hotpath:
+- фиксированный и дешёвый parsing/validation;
+- bounded channel operations;
+- precomputed/low-allocation доступ к данным.
+
+Нежелательно в hotpath:
+- повторные дорогие decode;
+- широкие lock-секции с `await` внутри;
+- высокочастотный подробный logging.
+
+### Стабильность важнее пиков
+Архитектура приоритетно выбирает стабильную пропускную способность и предсказуемую latency, а не краткосрочные пики ценой churn и long-tail reconnect.
+
+## Правила эволюции модели
+
+Чтобы расширять модель безопасно:
+- новые policy knobs сначала внедрять в Control Plane;
+- контракты Data Plane (`conn_id`, route/close семантика) держать стабильными;
+- перед дефолтным включением проверять generation/registry инварианты;
+- новые recovery/retry стратегии вводить через явный config-флаг.
+
+## Нюансы отказов и восстановления
+
+- падение single-endpoint DC — штатный деградированный сценарий; приоритет: быстрый reconnect и, при необходимости, shadow/probing;
+- idle-close со стороны peer должен считаться нормальным событием при upstream idle-timeout;
+- backoff reconnect-логики должен ограничивать синхронный churn, но сохранять быстрые первые попытки;
+- fallback (`ME -> direct DC`) — это переключаемая policy-ветка, а не автоматический признак бага транспорта.
+
+## Краткий словарь
+- `Coverage`: достаточное число живых writer-ов для политики приёма по DC.
+- `Floor`: целевая минимальная ёмкость writer-ов.
+- `Churn`: частые циклы reconnect/remove writer-ов.
+- `Hotpath`: пер-пакетный/пер-коннектный путь, где любые лишние ожидания и аллокации особенно дороги.

docs/FAQ.en.md

@@ -0,0 +1,285 @@
+## How to set up a "proxy sponsor" channel and statistics via the @MTProxybot
+1. Go to the @MTProxybot.
+2. Enter the `/newproxy` command.
+3. Send your server's IP address and port. For example: `1.2.3.4:443`.
+4. Open the configuration file: `nano /etc/telemt/telemt.toml`.
+5. Copy and send the user secret from the `[access.users]` section to the bot.
+6. Copy the tag provided by the bot. For example: `1234567890abcdef1234567890abcdef`.
+> [!WARNING]
+> The link provided by the bot will not work. Do not copy or use it!
+7. Uncomment the `ad_tag` parameter and enter the tag received from the bot.
+8. Uncomment or add the `use_middle_proxy = true` parameter.
+
+Configuration example:
+```toml
+[general]
+ad_tag = "1234567890abcdef1234567890abcdef"
+use_middle_proxy = true
+```
+9. Save the changes (in nano: Ctrl+S -> Ctrl+X).
+10. Restart the telemt service: `systemctl restart telemt`.
+11. Send the `/myproxies` command to the bot and select the added server.
+12. Click the "Set promotion" button.
+13. Send a **public link** to the channel. Private channels cannot be added!
+14. Wait for about 1 hour for the information to update on Telegram servers.
+> [!WARNING]
+> The sponsored channel will not be displayed to you if you are already subscribed to it.
+
+**You can also configure different sponsored channels for different users:**
+```toml
+[access.user_ad_tags]
+hello = "ad_tag"
+hello2 = "ad_tag2"
+```
+## Recognizability for DPI and crawler
+
+On April 1, 2026, we became aware of a method for detecting MTProxy Fake-TLS, 
+based on the ECH extension and the ordering of cipher suites, 
+as well as an overall unique JA3/JA4 fingerprint 
+that does not occur in modern browsers: 
+we have already submitted initial changes to the Telegram Desktop developers and are working on updates for other clients.
+
+- We consider this a breakthrough aspect, which has no stable analogues today
+- Based on this: if `telemt` configured correctly, **TLS mode is completely identical to real-life handshake + communication** with a specified host
+- Here is our evidence:
+    - 212.220.88.77 - "dummy" host, running `telemt`
+    - `petrovich.ru` - `tls` + `masking` host, in HEX: `706574726f766963682e7275`
+    - **No MITM + No Fake Certificates/Crypto** = pure transparent *TCP Splice* to "best" upstream: MTProxy or tls/mask-host:
+      - DPI see legitimate HTTPS to `tls_host`, including *valid chain-of-trust* and entropy
+      - Crawlers completely satisfied receiving responses from `mask_host`
+  ### Client WITH secret-key accesses the MTProxy resource:
+  
+  <img width="360" height="439" alt="telemt" src="https://github.com/user-attachments/assets/39352afb-4a11-4ecc-9d91-9e8cfb20607d" />
+  
+  ### Client WITHOUT secret-key gets transparent access to the specified resource:
+    - with trusted certificate
+    - with original handshake
+    - with full request-response way
+    - with low-latency overhead
+```bash
+root@debian:~/telemt# curl -v -I --resolve petrovich.ru:443:212.220.88.77 https://petrovich.ru/
+* Added petrovich.ru:443:212.220.88.77 to DNS cache
+* Hostname petrovich.ru was found in DNS cache
+*   Trying 212.220.88.77:443...
+* Connected to petrovich.ru (212.220.88.77) port 443 (#0)
+* ALPN: offers h2,http/1.1
+* TLSv1.3 (OUT), TLS handshake, Client hello (1):
+*  CAfile: /etc/ssl/certs/ca-certificates.crt
+*  CApath: /etc/ssl/certs
+* TLSv1.3 (IN), TLS handshake, Server hello (2):
+* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
+* TLSv1.3 (IN), TLS handshake, Certificate (11):
+* TLSv1.3 (IN), TLS handshake, CERT verify (15):
+* TLSv1.3 (IN), TLS handshake, Finished (20):
+* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
+* TLSv1.3 (OUT), TLS handshake, Finished (20):
+* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384
+* ALPN: server did not agree on a protocol. Uses default.
+* Server certificate:
+*  subject: C=RU; ST=Saint Petersburg; L=Saint Petersburg; O=STD Petrovich; CN=*.petrovich.ru
+*  start date: Jan 28 11:21:01 2025 GMT
+*  expire date: Mar  1 11:21:00 2026 GMT
+*  subjectAltName: host "petrovich.ru" matched cert's "petrovich.ru"
+*  issuer: C=BE; O=GlobalSign nv-sa; CN=GlobalSign RSA OV SSL CA 2018
+*  SSL certificate verify ok.
+* using HTTP/1.x
+> HEAD / HTTP/1.1
+> Host: petrovich.ru
+> User-Agent: curl/7.88.1
+> Accept: */*
+> 
+* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
+* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
+* old SSL session ID is stale, removing
+< HTTP/1.1 200 OK
+HTTP/1.1 200 OK
+< Server: Variti/0.9.3a
+Server: Variti/0.9.3a
+< Date: Thu, 01 Jan 2026 00:0000 GMT
+Date: Thu, 01 Jan 2026 00:0000 GMT
+< Access-Control-Allow-Origin: *
+Access-Control-Allow-Origin: *
+< Content-Type: text/html
+Content-Type: text/html
+< Cache-Control: no-store
+Cache-Control: no-store
+< Expires: Thu, 01 Jan 2026 00:0000 GMT
+Expires: Thu, 01 Jan 2026 00:0000 GMT
+< Pragma: no-cache
+Pragma: no-cache
+< Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
+Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
+< Content-Type: text/html
+Content-Type: text/html
+< Content-Length: 31253
+Content-Length: 31253
+< Connection: keep-alive
+Connection: keep-alive
+< Keep-Alive: timeout=60
+Keep-Alive: timeout=60
+
+< 
+* Connection #0 to host petrovich.ru left intact
+
+```
+- We challenged ourselves, we kept trying and we didn't only *beat the air*: now, we have something to show you
+  - Do not just take our word for it? - This is great and we respect that: you can build your own `telemt` or download a build and check it right now
+
+
+## F.A.Q.
+
+### Telegram Calls via MTProxy
+- Telegram architecture **does NOT allow calls via MTProxy**, but only via SOCKS5, which cannot be obfuscated
+
+### How does DPI see MTProxy TLS?
+- DPI sees MTProxy in Fake TLS (ee) mode as TLS 1.3
+- the SNI you specify sends both the client and the server;
+- ALPN is similar to HTTP 1.1/2;
+- high entropy, which is normal for AES-encrypted traffic;
+
+### Whitelist on IP
+- MTProxy cannot work when there is: 
+  - no IP connectivity to the target host: Russian Whitelist on Mobile Networks - "Белый список"
+  - OR all TCP traffic is blocked
+  - OR high entropy/encrypted traffic is blocked: content filters at universities and critical infrastructure
+  - OR all TLS traffic is blocked
+  - OR specified port is blocked: use 443 to make it "like real"
+  - OR provided SNI is blocked: use "officially approved"/innocuous name
+- like most protocols on the Internet; 
+- these situations are observed:
+  - in China behind the Great Firewall
+  - in Russia on mobile networks, less in wired networks
+  - in Iran during "activity"
+
+### Why do you need a middle proxy (ME)
+https://github.com/telemt/telemt/discussions/167
+
+### How many people can use one link
+By default, an unlimited number of people can use a single link.  
+However, you can limit the number of unique IP addresses for each user:
+```toml
+[access.user_max_unique_ips]
+hello = 1
+```
+This parameter sets the maximum number of unique IP addresses from which a single link can be used simultaneously. If the first user disconnects, a second one can connect. At the same time, multiple users can connect from a single IP address simultaneously (for example, devices on the same Wi-Fi network).
+
+### How to create multiple different links
+1. Generate the required number of secrets using the command: `openssl rand -hex 16`.
+2. Open the configuration file: `nano /etc/telemt/telemt.toml`.
+3. Add new users to the `[access.users]` section:
+```toml
+[access.users]
+user1 = "00000000000000000000000000000001"
+user2 = "00000000000000000000000000000002"
+user3 = "00000000000000000000000000000003"
+```
+4. Save the configuration (Ctrl+S -> Ctrl+X). There is no need to restart the telemt service.
+5. Get the ready-to-use links using the command:
+```bash
+curl -s http://127.0.0.1:9091/v1/users | jq
+```
+
+### "Unknown TLS SNI" error
+Usually, this error occurs if you have changed the `tls_domain` parameter, but users continue to connect using old links with the previous domain.
+
+If you need to allow connections with any domains (ignoring SNI mismatches), add the following parameters:
+```toml
+[censorship]
+unknown_sni_action = "mask"
+```
+
+### How to view metrics
+
+1. Open the configuration file: `nano /etc/telemt/telemt.toml`.
+2. Add the following parameters:
+```toml
+[server]
+metrics_port = 9090
+metrics_whitelist = ["127.0.0.1/32", "::1/128", "0.0.0.0/0"]
+```
+3. Save the changes (Ctrl+S -> Ctrl+X).
+4. After that, metrics will be available at: `SERVER_IP:9090/metrics`. 
+> [!WARNING]
+> The value `"0.0.0.0/0"` in `metrics_whitelist` opens access to metrics from any IP address. It is recommended to replace it with your personal IP, for example: `"1.2.3.4/32"`.
+
+### Too many open files
+- On a fresh Linux install the default open file limit is low; under load `telemt` may fail with `Accept error: Too many open files`
+- **Systemd**: add `LimitNOFILE=65536` to the `[Service]` section (already included in the example above)
+- **Docker**: add `--ulimit nofile=65536:65536` to your `docker run` command, or in `docker-compose.yml`:
+```yaml
+ulimits:
+  nofile:
+    soft: 65536
+    hard: 65536
+```
+- **System-wide** (optional): add to `/etc/security/limits.conf`:
+```
+*       soft    nofile  1048576
+*       hard    nofile  1048576
+root    soft    nofile  1048576
+root    hard    nofile  1048576
+```
+
+
+## Additional parameters
+
+### Domain in the link instead of IP
+To display a domain instead of an IP address in the connection links, add the following lines to the configuration file:
+```toml
+[general.links]
+public_host = "proxy.example.com"
+```
+
+### Total server connection limit
+This parameter limits the total number of active connections to the server:
+```toml
+[server]
+max_connections = 10000    # 0 - unlimited, 10000 - default
+```
+
+### Upstream Manager
+To configure outbound connections (upstreams), add the corresponding parameters to the `[[upstreams]]` section of the configuration file:
+
+#### Binding to an outbound IP address
+```toml
+[[upstreams]]
+type = "direct"
+weight = 1
+enabled = true
+interface = "192.168.1.100" # Replace with your outbound IP
+```
+
+#### Using SOCKS4/5 as an Upstream
+- Without authorization:
+```toml
+[[upstreams]]
+type = "socks5"            # Specify SOCKS4 or SOCKS5
+address = "1.2.3.4:1234"   # SOCKS-server Address
+weight = 1                 # Set Weight for Scenarios
+enabled = true
+```
+
+- With authorization:
+```toml
+[[upstreams]]
+type = "socks5"            # Specify SOCKS4 or SOCKS5
+address = "1.2.3.4:1234"   # SOCKS-server Address
+username = "user"          # Username for Auth on SOCKS-server
+password = "pass"          # Password for Auth on SOCKS-server
+weight = 1                 # Set Weight for Scenarios
+enabled = true
+```
+
+#### Using Shadowsocks as an Upstream
+For this method to work, the `use_middle_proxy = false` parameter must be set.
+
+```toml
+[general]
+use_middle_proxy = false
+
+[[upstreams]]
+type = "shadowsocks"
+url = "ss://2022-blake3-aes-256-gcm:BASE64_KEY@1.2.3.4:8388"
+weight = 1
+enabled = true
+```

docs/FAQ.ru.md

@@ -1,65 +1,285 @@
-## Как настроить канал "спонсор прокси"
+## Как настроить канал "спонсор прокси" и статистику через бота @MTProxybot
 
-1. Зайти в бота @MTProxybot.
-2. Ввести команду `/newproxy`
-3. Отправить IP и порт сервера. Например: 1.2.3.4:443
-4. Открыть конфиг `nano /etc/telemt.toml`.
-5. Скопировать и отправить боту секрет пользователя из раздела [access.users].
-6. Скопировать полученный tag у бота. Например 1234567890abcdef1234567890abcdef.
+1. Зайдите в бота @MTProxybot.
+2. Введите команду `/newproxy`.
+3. Отправьте IP-адрес и порт сервера. Например: `1.2.3.4:443`.
+4. Откройте файл конфигурации: `nano /etc/telemt/telemt.toml`.
+5. Скопируйте и отправьте боту секрет пользователя из раздела `[access.users]`.
+6. Скопируйте тег (tag), который выдаст бот. Например: `1234567890abcdef1234567890abcdef`.
 > [!WARNING]
-> Ссылка, которую выдает бот, не будет работать. Не копируйте и не используйте её!
-7. Раскомментировать параметр ad_tag и вписать tag, полученный у бота.
-8. Раскомментировать/добавить параметр use_middle_proxy = true.
+> Ссылка, которую выдает бот, работать не будет. Не копируйте и не используйте её!
+7. Раскомментируйте параметр `ad_tag` и впишите тег, полученный от бота.
+8. Раскомментируйте или добавьте параметр `use_middle_proxy = true`.
 
-Пример конфига:
+Пример конфигурации:
 ```toml
 [general]
 ad_tag = "1234567890abcdef1234567890abcdef"
 use_middle_proxy = true
 ```
-9.  Сохранить конфиг. Ctrl+S -> Ctrl+X.
-10. Перезапустить telemt `systemctl restart telemt`.
-11. В боте отправить команду /myproxies и выбрать добавленный сервер.
-12. Нажать кнопку "Set promotion".
-13. Отправить **публичную ссылку** на канал. Приватный канал добавить нельзя!
-14. Подождать примерно 1 час, пока информация обновится на серверах Telegram.
+9. Сохраните изменения (в nano: Ctrl+S -> Ctrl+X).
+10. Перезапустите службу telemt: `systemctl restart telemt`.
+11. В боте отправьте команду `/myproxies` и выберите добавленный сервер.
+12. Нажмите кнопку «Set promotion».
+13. Отправьте **публичную ссылку** на канал. Приватные каналы добавлять нельзя!
+14. Подождите примерно 1 час, пока информация обновится на серверах Telegram.
 > [!WARNING]
-> У вас не будет отображаться "спонсор прокси" если вы уже подписаны на канал.
+> Спонсорский канал не будет у вас отображаться, если вы уже на него подписаны.
 
-## Сколько человек может пользоваться 1 ссылкой
+**Вы также можете настроить разные спонсорские каналы для разных пользователей:**
+```toml
+[access.user_ad_tags]
+hello = "ad_tag"
+hello2 = "ad_tag2"
+```
+## Распознаваемость для DPI и сканеров
 
-По умолчанию 1 ссылкой может пользоваться сколько угодно человек.  
-Вы можете ограничить число IP, использующих прокси.
+1 апреля 2026 года нам стало известно о методе обнаружения MTProxy Fake-TLS, основанном на расширении ECH и порядке набора шифров, 
+а также об общем уникальном отпечатке JA3/JA4, который не встречается в современных браузерах: мы уже отправили первоначальные изменения разработчикам Telegram Desktop и работаем над обновлениями для других клиентов.
+
+- Мы считаем это прорывом, которому на сегодняшний день нет стабильных аналогов;
+- Исходя из этого: если `telemt` настроен правильно, **режим TLS полностью идентичен реальному «рукопожатию» + обмену данными** с указанным хостом;
+- Вот наши доказательства:
+    - 212.220.88.77 — «фиктивный» хост, на котором запущен `telemt`;
+    - `petrovich.ru` — хост с `tls` + `masking`, в HEX: `706574726f766963682e7275`;
+    - **Без MITM + без поддельных сертификатов/шифрования** = чистое прозрачное *TCP Splice* к «лучшему» исходному серверу: MTProxy или tls/mask-host:
+      - DPI видит легитимный HTTPS к `tls_host`, включая *достоверную цепочку доверия* и энтропию;
+      - Краулеры полностью удовлетворены получением ответов от `mask_host`.
+ 
+  ### Клиент С секретным ключом получает доступ к ресурсу MTProxy:
+  
+  <img width="360" height="439" alt="telemt" src="https://github.com/user-attachments/assets/39352afb-4a11-4ecc-9d91-9e8cfb20607d" />
+  
+  ### Клиент БЕЗ секретного ключа получает прозрачный доступ к указанному ресурсу:
+    - с доверенным сертификатом;
+    - с исходным «рукопожатием»;
+    - с полным циклом запрос-ответ;
+    - с низкой задержкой.
+
+```bash
+root@debian:~/telemt# curl -v -I --resolve petrovich.ru:443:212.220.88.77 https://petrovich.ru/
+* Added petrovich.ru:443:212.220.88.77 to DNS cache
+* Hostname petrovich.ru was found in DNS cache
+*   Trying 212.220.88.77:443...
+* Connected to petrovich.ru (212.220.88.77) port 443 (#0)
+* ALPN: offers h2,http/1.1
+* TLSv1.3 (OUT), TLS handshake, Client hello (1):
+*  CAfile: /etc/ssl/certs/ca-certificates.crt
+*  CApath: /etc/ssl/certs
+* TLSv1.3 (IN), TLS handshake, Server hello (2):
+* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
+* TLSv1.3 (IN), TLS handshake, Certificate (11):
+* TLSv1.3 (IN), TLS handshake, CERT verify (15):
+* TLSv1.3 (IN), TLS handshake, Finished (20):
+* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
+* TLSv1.3 (OUT), TLS handshake, Finished (20):
+* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384
+* ALPN: server did not agree on a protocol. Uses default.
+* Server certificate:
+*  subject: C=RU; ST=Saint Petersburg; L=Saint Petersburg; O=STD Petrovich; CN=*.petrovich.ru
+*  start date: Jan 28 11:21:01 2025 GMT
+*  expire date: Mar  1 11:21:00 2026 GMT
+*  subjectAltName: host "petrovich.ru" matched cert's "petrovich.ru"
+*  issuer: C=BE; O=GlobalSign nv-sa; CN=GlobalSign RSA OV SSL CA 2018
+*  SSL certificate verify ok.
+* using HTTP/1.x
+> HEAD / HTTP/1.1
+> Host: petrovich.ru
+> User-Agent: curl/7.88.1
+> Accept: */*
+> 
+* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
+* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
+* old SSL session ID is stale, removing
+< HTTP/1.1 200 OK
+HTTP/1.1 200 OK
+< Server: Variti/0.9.3a
+Server: Variti/0.9.3a
+< Date: Thu, 01 Jan 2026 00:0000 GMT
+Date: Thu, 01 Jan 2026 00:0000 GMT
+< Access-Control-Allow-Origin: *
+Access-Control-Allow-Origin: *
+< Content-Type: text/html
+Content-Type: text/html
+< Cache-Control: no-store
+Cache-Control: no-store
+< Expires: Thu, 01 Jan 2026 00:0000 GMT
+Expires: Thu, 01 Jan 2026 00:0000 GMT
+< Pragma: no-cache
+Pragma: no-cache
+< Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
+Set-Cookie: ipp_uid=XXXXX/XXXXX/XXXXX==; Expires=Tue, 31 Dec 2040 23:59:59 GMT; Domain=.petrovich.ru; Path=/
+< Content-Type: text/html
+Content-Type: text/html
+< Content-Length: 31253
+Content-Length: 31253
+< Connection: keep-alive
+Connection: keep-alive
+< Keep-Alive: timeout=60
+Keep-Alive: timeout=60
+
+< 
+* Connection #0 to host petrovich.ru left intact
+
+```
+- Мы поставили перед собой задачу, не сдавались и не просто «бились в пустоту»: теперь у нас есть что вам показать.
+- Не верите нам на слово? — Это прекрасно, и мы уважаем ваше решение: вы можете собрать свой собственный `telemt` или скачать готовую сборку и проверить её прямо сейчас.
+
+### Звонки в Telegram через MTProxy
+- Архитектура Telegram **НЕ поддерживает звонки через MTProxy**, а только через SOCKS5, который невозможно замаскировать
+
+### Как DPI распознает TLS-соединение MTProxy?
+- DPI распознает MTProxy в режиме Fake TLS (ee) как TLS 1.3
+- указанный вами SNI отправляется как клиентом, так и сервером;
+- ALPN аналогичен HTTP 1.1/2;
+- высокая энтропия, что нормально для трафика, зашифрованного AES;
+
+### Белый список по IP
+- MTProxy не может работать, если: 
+  - отсутствует IP-связь с целевым хостом: российский белый список в мобильных сетях — «Белый список»;
+  - ИЛИ весь TCP-трафик заблокирован;
+  - ИЛИ трафик с высокой энтропией/зашифрованный трафик заблокирован: контент-фильтры в университетах и критически важной инфраструктуре;
+  - ИЛИ весь TLS-трафик заблокирован;
+  - ИЛИ заблокирован указанный порт: используйте 443, чтобы сделать его «как настоящий»;
+  - ИЛИ заблокирован предоставленный SNI: используйте «официально одобренное»/безобидное имя;
+- как и большинство протоколов в Интернете; 
+- такие ситуации наблюдаются:
+  - в Китае за Великим файрволом;
+  - в России в мобильных сетях, реже в проводных сетях;
+  - в Иране во время «активности».
+
+
+## Зачем нужен middle proxy (ME)
+https://github.com/telemt/telemt/discussions/167
+
+
+## Что такое dd и ee в контексте MTProxy?
+
+Это два разных режима работы прокси. Понять, какой режим используется, можно взглянув на начало секрета — там будет dd или ee, вот пример:
+tg://proxy?server=s1.dimasssss.space&port=443&secret=eebe3007e927acd147dde12bee8b1a7c9364726976652e676f6f676c652e636f6d
+
+dd — режим с мусорным трафиком, обфускацией данных, похожий на shadowsocks. У такого трафика есть заметный паттерн, который DPI умеют распознавать и впоследствии блокировать. Использовать этот режим на текущий момент не рекомендуется.
+
+ee — режим маскировки под существующий домен (FakeTLS), словно вы сёрфите в интернете через браузер. На текущий момент не попадает под блокировку.
+
+### Где эти режимы настраиваются?
+
+```toml
+В конфиге telemt.toml в разделе [general.modes]:
+classic = false # классический режим, давно стал бесполезным
+secure = false # переменная dd-режима
+tls = true # переменная ee-режима
+```
+
+## Сколько человек может пользоваться одной ссылкой
+
+По умолчанию одной ссылкой может пользоваться неограниченное число людей.  
+Однако вы можете ограничить количество уникальных IP-адресов для каждого пользователя:
 ```toml
 [access.user_max_unique_ips]
 hello = 1
 ```
-Этот параметр ограничивает, сколько уникальных IP может использовать 1 ссылку одновременно. Если один пользователь отключится, второй сможет подключиться. Также с одного IP может сидеть несколько пользователей.
+Этот параметр задает максимальное количество уникальных IP-адресов, с которых можно одновременно использовать одну ссылку. Если первый пользователь отключится, второй сможет подключиться. При этом с одного IP-адреса могут подключаться несколько пользователей одновременно (например, устройства в одной Wi-Fi сети).
 
-## Как сделать несколько разных ссылок
+## Как создать несколько разных ссылок
 
-1. Сгенерируйте нужное число секретов `openssl rand -hex 16`
-2. Открыть конфиг `nano /etc/telemt.toml`
-3. Добавить новых пользователей.
+1. Сгенерируйте необходимое количество секретов с помощью команды: `openssl rand -hex 16`.
+2. Откройте файл конфигурации: `nano /etc/telemt/telemt.toml`.
+3. Добавьте новых пользователей в секцию `[access.users]`:
 ```toml
 [access.users]
 user1 = "00000000000000000000000000000001"
 user2 = "00000000000000000000000000000002"
 user3 = "00000000000000000000000000000003"
 ```
-4. Сохранить конфиг. Ctrl+S -> Ctrl+X. Перезапускать telemt не нужно.
-5. Получить ссылки через `journalctl -u telemt -n -g "links" --no-pager -o cat | tac`
+4. Сохраните конфигурацию (Ctrl+S -> Ctrl+X). Перезапускать службу telemt не нужно.
+5. Получите готовые ссылки с помощью команды:
+```bash
+curl -s http://127.0.0.1:9091/v1/users | jq
+```
+
+## Ошибка "Unknown TLS SNI"
+Обычно эта ошибка возникает, если вы изменили параметр `tls_domain`, но пользователи продолжают подключаться по старым ссылкам с прежним доменом.
+
+Если необходимо разрешить подключение с любыми доменами (игнорируя несовпадения SNI), добавьте следующие параметры:
+```toml
+[censorship]
+unknown_sni_action = "mask"
+```
 
 ## Как посмотреть метрики
 
-1. Открыть конфиг `nano /etc/telemt.toml`
-2. Добавить следующие параметры
+1. Откройте файл конфигурации: `nano /etc/telemt/telemt.toml`.
+2. Добавьте следующие параметры:
 ```toml
 [server]
 metrics_port = 9090
 metrics_whitelist = ["127.0.0.1/32", "::1/128", "0.0.0.0/0"]
 ```
-3. Сохранить конфиг. Ctrl+S -> Ctrl+X.
-4. Метрики доступны по адресу SERVER_IP:9090/metrics. 
+3. Сохраните изменения (Ctrl+S -> Ctrl+X).
+4. После этого метрики будут доступны по адресу: `SERVER_IP:9090/metrics`. 
 > [!WARNING]
-> "0.0.0.0/0" в metrics_whitelist открывает доступ с любого IP. Замените на свой ip. Например "1.2.3.4"
+> Значение `"0.0.0.0/0"` в `metrics_whitelist` открывает доступ к метрикам с любого IP-адреса. Рекомендуется заменить его на ваш личный IP, например: `"1.2.3.4/32"`.
+
+## Дополнительные параметры
+
+### Домен в ссылке вместо IP
+Чтобы в ссылках для подключения отображался домен вместо IP-адреса, добавьте следующие строки в файл конфигурации:
+```toml
+[general.links]
+public_host = "proxy.example.com"
+```
+
+### Общий лимит подключений к серверу
+Этот параметр ограничивает общее количество активных подключений к серверу:
+```toml
+[server]
+max_connections = 10000    # 0 - без ограничений, 10000 - по умолчанию
+```
+
+### Upstream Manager
+Для настройки исходящих подключений (Upstreams) добавьте соответствующие параметры в секцию `[[upstreams]]` файла конфигурации:
+
+#### Привязка к исходящему IP-адресу
+```toml
+[[upstreams]]
+type = "direct"
+weight = 1
+enabled = true
+interface = "192.168.1.100" # Замените на ваш исходящий IP
+```
+
+#### Использование SOCKS4/5 в качестве Upstream
+- Без авторизации:
+```toml
+[[upstreams]]
+type = "socks5"            # выбор типа SOCKS4 или SOCKS5
+address = "1.2.3.4:1234"   # адрес сервера SOCKS
+weight = 1                 # вес
+enabled = true
+```
+
+- С авторизацией:
+```toml
+[[upstreams]]
+type = "socks5"            # выбор типа SOCKS4 или SOCKS5
+address = "1.2.3.4:1234"   # адрес сервера SOCKS
+username = "user"          # имя пользователя
+password = "pass"          # пароль
+weight = 1                 # вес
+enabled = true
+```
+
+#### Использование Shadowsocks в качестве Upstream
+Для работы этого метода требуется установить параметр `use_middle_proxy = false`.
+
+```toml
+[general]
+use_middle_proxy = false
+
+[[upstreams]]
+type = "shadowsocks"
+url = "ss://2022-blake3-aes-256-gcm:BASE64_KEY@1.2.3.4:8388"
+weight = 1
+enabled = true
+```

docs/LICENSE/TELEMT-LICENSE.en.md

@@ -0,0 +1,120 @@
+# TELEMT License 3.3
+
+***Copyright (c) 2026 Telemt***
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this Software and associated documentation files (the "Software"), to use, reproduce, modify, prepare derivative works of, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that all copyright notices, license terms, and conditions set forth in this License are preserved and complied with.
+
+### Official Translations
+
+The canonical version of this License is the English version.
+Official translations are provided for informational purposes only and for convenience, and do not have legal force. In case of any discrepancy, the English version of this License shall prevail.
+
+| Language    | Location |
+|-------------|----------|
+| English     | [docs/LICENSE/TELEMT-LICENSE.en.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.en.md)|
+| German      | [docs/LICENSE/TELEMT-LICENSE.de.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.de.md)|
+| Russian     | [docs/LICENSE/TELEMT-LICENSE.ru.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.ru.md)|
+
+### License Versioning Policy
+
+This License is version 3.3 of the TELEMT License.
+Each version of the Software is licensed under the License that accompanies its corresponding source code distribution.
+
+Future versions of the Software may be distributed under a different version of the TELEMT Public License or under a different license, as determined by the Telemt maintainers.
+
+Any such change of license applies only to the versions of the Software distributed with the new license and SHALL NOT retroactively affect any previously released versions of the Software.
+
+Recipients of the Software are granted rights only under the License provided with the version of the Software they received.
+
+Redistributions of the Software, including Modified Versions, MUST preserve the copyright notices, license text, and conditions of this License for all portions of the Software derived from Telemt.
+
+Additional terms or licenses may be applied to modifications or additional code added by a redistributor, provided that such terms do not restrict or alter the rights granted under this License for the original Telemt Software.
+
+Nothing in this section limits the rights granted under this License for versions of the Software already released.
+
+### Definitions
+
+For the purposes of this License:
+
+**"Software"** means the Telemt software, including source code, documentation, and any associated files distributed under this License.
+
+**"Contributor"** means any person or entity that submits code, patches, documentation, or other contributions to the Software that are accepted into the Software by the maintainers.
+
+**"Contribution"** means any work of authorship intentionally submitted to the Software for inclusion in the Software.
+
+**"Modified Version"** means any version of the Software that has been changed, adapted, extended, or otherwise modified from the original Software.
+
+**"Maintainers"** means the individuals or entities responsible for the official Telemt project and its releases.
+
+### 1 Attribution
+
+Redistributions of the Software, in source or binary form, MUST RETAIN:
+
+- the above copyright notice;
+- this license text;
+- any existing attribution notices.
+
+### 2 Modification Notice
+
+If you modify the Software, you MUST clearly state that the Software has been modified and include a brief description of the changes made.
+
+Modified versions MUST NOT be presented as the original Telemt.
+
+### 3 Trademark and Branding
+
+This license DOES NOT grant permission to use the name "Telemt", the Telemt logo, or any Telemt trademarks or branding.
+
+Redistributed or modified versions of the Software MAY NOT use the Telemt name in a way that suggests endorsement or official origin without explicit permission from the Telemt maintainers.
+
+Use of the name "Telemt" to describe a modified version of the Software is permitted only if the modified version is clearly identified as a modified or unofficial version.
+
+Any distribution that could reasonably confuse users into believing that the software is an official Telemt release is prohibited.
+
+### 4 Binary Distribution Transparency
+
+If you distribute compiled binaries of the Software, you are ENCOURAGED to provide access to the corresponding source code and build instructions where reasonably possible.
+
+This helps preserve transparency and allows recipients to verify the integrity and reproducibility of distributed builds.
+
+### 5 Patent Grant and Defensive Termination Clause
+
+Each contributor grants you a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable patent license to:
+
+- make,
+- have made,
+- use,
+- offer to sell,
+- sell,
+- import,
+- and otherwise transfer the Software.
+
+This patent license applies only to those patent claims necessarily infringed by the contributor’s contribution alone or by combination of their contribution with the Software.
+
+If you initiate or participate in any patent litigation, including cross-claims or counterclaims, alleging that the Software or any contribution incorporated within the Software constitutes patent infringement, then **all rights granted to you under this license shall terminate immediately** as of the date such litigation is filed.
+
+Additionally, if you initiate legal action alleging that the Software itself infringes your patent or other intellectual property rights, then all rights granted to you under this license SHALL TERMINATE automatically.
+
+### 6 Contributions
+
+Unless you explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Software shall be licensed under the terms of this License.
+
+By submitting a Contribution, you grant the Telemt maintainers and all recipients of the Software the rights described in this License with respect to that Contribution.
+
+### 7 Network Use Attribution
+
+If the Software is used to provide a publicly accessible network service, the operator of such service SHOULD provide attribution to Telemt in at least one of the following locations:
+
+- service documentation;
+- service description;
+- an "About" or similar informational page;
+- other user-visible materials reasonably associated with the service.
+
+Such attribution MUST NOT imply endorsement by the Telemt project or its maintainers.
+
+### 8 Disclaimer of Warranty and Severability Clause
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+IF ANY PROVISION OF THIS LICENSE IS HELD TO BE INVALID OR UNENFORCEABLE, SUCH PROVISION SHALL BE INTERPRETED TO REFLECT THE ORIGINAL INTENT OF THE PARTIES AS CLOSELY AS POSSIBLE, AND THE REMAINING PROVISIONS SHALL REMAIN IN FULL FORCE AND EFFECT.

docs/LICENSE/TELEMT-LICENSE.ru.md

@@ -0,0 +1,120 @@
+# TELEMT Лицензия 3.3
+
+***Copyright (c) 2026 Telemt***
+
+Настоящим безвозмездно предоставляется разрешение любому лицу, получившему копию данного программного обеспечения и сопутствующей документации (далее — "Программное обеспечение"), использовать, воспроизводить, изменять, создавать производные произведения, объединять, публиковать, распространять, сублицензировать и/или продавать копии Программного обеспечения, а также разрешать лицам, которым предоставляется Программное обеспечение, осуществлять указанные действия при условии соблюдения и сохранения всех уведомлений об авторском праве, условий и положений настоящей Лицензии.
+
+### Официальные переводы
+
+Канонической версией настоящей Лицензии является версия на английском языке.  
+Официальные переводы предоставляются исключительно в информационных целях и для удобства и не имеют юридической силы. В случае любых расхождений приоритет имеет английская версия.
+
+| Язык       | Расположение |
+|------------|--------------|
+| Русский    | [docs/LICENSE/TELEMT-LICENSE.ru.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.ru.md)|
+| Английский | [docs/LICENSE/TELEMT-LICENSE.en.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.en.md)|
+| Немецкий   | [docs/LICENSE/TELEMT-LICENSE.de.md](https://github.com/telemt/telemt/tree/main/docs/LICENSE/TELEMT-LICENSE.de.md)|
+
+### Политика версионирования лицензии
+
+Настоящая Лицензия является версией 3.3 Лицензии TELEMT.  
+Каждая версия Программного обеспечения лицензируется в соответствии с Лицензией, сопровождающей соответствующее распространение исходного кода.
+
+Будущие версии Программного обеспечения могут распространяться в соответствии с иной версией Лицензии TELEMT Public License либо под иной лицензией, определяемой мейнтейнерами Telemt.
+
+Любое такое изменение лицензии применяется исключительно к версиям Программного обеспечения, распространяемым с новой лицензией, и НЕ распространяется ретроактивно на ранее выпущенные версии Программного обеспечения.
+
+Получатели Программного обеспечения приобретают права исключительно в соответствии с Лицензией, предоставленной вместе с полученной ими версией Программного обеспечения.
+
+При распространении Программного обеспечения, включая Модифицированные версии, ОБЯЗАТЕЛЬНО сохранение уведомлений об авторском праве, текста лицензии и условий настоящей Лицензии в отношении всех частей Программного обеспечения, производных от Telemt.
+
+Дополнительные условия или лицензии могут применяться к модификациям или дополнительному коду, добавленному распространителем, при условии, что такие условия не ограничивают и не изменяют права, предоставленные настоящей Лицензией в отношении оригинального Программного обеспечения Telemt.
+
+Ничто в настоящем разделе не ограничивает права, предоставленные настоящей Лицензией в отношении уже выпущенных версий Программного обеспечения.
+
+### Определения
+
+Для целей настоящей Лицензии:
+
+**"Программное обеспечение"** означает программное обеспечение Telemt, включая исходный код, документацию и любые сопутствующие файлы, распространяемые в соответствии с настоящей Лицензией.
+
+**"Контрибьютор"** означает любое физическое или юридическое лицо, которое предоставляет код, исправления, документацию или иные материалы в качестве вклада в Программное обеспечение, принятые мейнтейнерами для включения в Программное обеспечение.
+
+**"Вклад"** означает любое произведение, сознательно представленное для включения в Программное обеспечение.
+
+**"Модифицированная версия"** означает любую версию Программного обеспечения, которая была изменена, адаптирована, расширена или иным образом модифицирована по сравнению с оригинальным Программным обеспечением.
+
+**"Мейнтейнеры"** означает физических или юридических лиц, ответственных за официальный проект Telemt и его релизы.
+
+### 1. Атрибуция
+
+При распространении Программного обеспечения, как в виде исходного кода, так и в бинарной форме, ОБЯЗАТЕЛЬНО СОХРАНЕНИЕ:
+
+- указанного выше уведомления об авторском праве;
+- текста настоящей Лицензии;
+- всех существующих уведомлений об атрибуции.
+
+### 2. Уведомление о модификациях
+
+В случае внесения изменений в Программное обеспечение вы ОБЯЗАНЫ явно указать факт модификации Программного обеспечения и включить краткое описание внесённых изменений.
+
+Модифицированные версии НЕ ДОЛЖНЫ представляться как оригинальное Программное обеспечение Telemt.
+
+### 3. Товарные знаки и брендинг
+
+Настоящая Лицензия НЕ предоставляет право на использование наименования "Telemt", логотипа Telemt или любых товарных знаков и элементов брендинга Telemt.
+
+Распространяемые или модифицированные версии Программного обеспечения НЕ МОГУТ использовать наименование Telemt таким образом, который может создавать впечатление одобрения или официального происхождения без явного разрешения мейнтейнеров Telemt.
+
+Использование наименования "Telemt" для описания модифицированной версии Программного обеспечения допускается только при условии, что такая версия чётко обозначена как модифицированная или неофициальная.
+
+Запрещается любое распространение, способное разумно ввести пользователей в заблуждение относительно того, что программное обеспечение является официальным релизом Telemt.
+
+### 4. Прозрачность распространения бинарных файлов
+
+В случае распространения скомпилированных бинарных файлов Программного обеспечения рекомендуется (ENCOURAGED) предоставлять доступ к соответствующему исходному коду и инструкциям по сборке, если это разумно возможно.
+
+Это способствует обеспечению прозрачности и позволяет получателям проверять целостность и воспроизводимость распространяемых сборок.
+
+### 5. Патентная лицензия и условие защитного прекращения
+
+Каждый контрибьютор предоставляет вам бессрочную, всемирную, неисключительную, безвозмездную, без лицензионных отчислений, безотзывную патентную лицензию на:
+
+- изготовление,
+- поручение изготовления,
+- использование,
+- предложение к продаже,
+- продажу,
+- импорт,
+- а также иные формы передачи Программного обеспечения.
+
+Данная патентная лицензия распространяется исключительно на те патентные притязания, которые неизбежно нарушаются вкладом контрибьютора отдельно либо в сочетании его вклада с Программным обеспечением.
+
+Если вы инициируете или участвуете в любом патентном судебном разбирательстве, включая встречные иски или требования, утверждая, что Программное обеспечение или любой Вклад, включённый в Программное обеспечение, нарушает патент, то **все предоставленные вам настоящей Лицензией права немедленно прекращаются** с даты подачи такого иска.
+
+Дополнительно, если вы инициируете судебное разбирательство, утверждая, что само Программное обеспечение нарушает ваш патент или иные права интеллектуальной собственности, все права, предоставленные вам настоящей Лицензией, ПРЕКРАЩАЮТСЯ автоматически.
+
+### 6. Вклады
+
+Если вы прямо не указали иное, любой Вклад, сознательно представленный для включения в Программное обеспечение, лицензируется на условиях настоящей Лицензии.
+
+Предоставляя Вклад, вы предоставляете мейнтейнерам Telemt и всем получателям Программного обеспечения права, предусмотренные настоящей Лицензией, в отношении такого Вклада.
+
+### 7. Атрибуция при сетевом использовании
+
+Если Программное обеспечение используется для предоставления общедоступного сетевого сервиса, оператор такого сервиса ДОЛЖЕН (SHOULD) обеспечить указание атрибуции Telemt как минимум в одном из следующих мест:
+
+- документация сервиса;
+- описание сервиса;
+- раздел "О программе" или аналогичная информационная страница;
+- иные материалы, доступные пользователю и разумно связанные с сервисом.
+
+Такая атрибуция НЕ ДОЛЖНА подразумевать одобрение со стороны проекта Telemt или его мейнтейнеров.
+
+### 8. Отказ от гарантий и оговорка о делимости
+
+ПРОГРАММНОЕ ОБЕСПЕЧЕНИЕ ПРЕДОСТАВЛЯЕТСЯ "КАК ЕСТЬ", БЕЗ КАКИХ-ЛИБО ГАРАНТИЙ, ЯВНЫХ ИЛИ ПОДРАЗУМЕВАЕМЫХ, ВКЛЮЧАЯ, В ЧАСТНОСТИ, ГАРАНТИИ ТОВАРНОЙ ПРИГОДНОСТИ, СООТВЕТСТВИЯ ОПРЕДЕЛЁННОЙ ЦЕЛИ И ОТСУТСТВИЯ НАРУШЕНИЙ ПРАВ.
+
+НИ ПРИ КАКИХ ОБСТОЯТЕЛЬСТВАХ АВТОРЫ ИЛИ ПРАВООБЛАДАТЕЛИ НЕ НЕСУТ ОТВЕТСТВЕННОСТИ ПО КАКИМ-ЛИБО ТРЕБОВАНИЯМ, УБЫТКАМ ИЛИ ИНОЙ ОТВЕТСТВЕННОСТИ, ВОЗНИКАЮЩИМ В РАМКАХ ДОГОВОРА, ДЕЛИКТА ИЛИ ИНЫМ ОБРАЗОМ, ИЗ, В СВЯЗИ С ИЛИ В РЕЗУЛЬТАТЕ ИСПОЛЬЗОВАНИЯ ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ИЛИ ИНЫХ ДЕЙСТВИЙ С НИМ.
+
+ЕСЛИ ЛЮБОЕ ПОЛОЖЕНИЕ НАСТОЯЩЕЙ ЛИЦЕНЗИИ ПРИЗНАЁТСЯ НЕДЕЙСТВИТЕЛЬНЫМ ИЛИ НЕПРИМЕНИМЫМ, ТАКОЕ ПОЛОЖЕНИЕ ПОДЛЕЖИТ ТОЛКОВАНИЮ МАКСИМАЛЬНО БЛИЗКО К ИСХОДНОМУ НАМЕРЕНИЮ СТОРОН, А ОСТАЛЬНЫЕ ПОЛОЖЕНИЯ СОХРАНЯЮТ ПОЛНУЮ СИЛУ И ДЕЙСТВИЕ.

docs/Quick_start/OPENBSD_QUICK_START_GUIDE.en.md

@@ -0,0 +1,132 @@
+# Telemt on OpenBSD (Build, Run, and rc.d)
+
+This guide covers a practical OpenBSD deployment flow for Telemt:
+- build from source,
+- install binary and config,
+- run as an rc.d daemon,
+- verify basic runtime behavior.
+
+## 1. Prerequisites
+
+Install required packages:
+
+```sh
+doas pkg_add rust git
+```
+
+Notes:
+- Telemt release installer (`install.sh`) is Linux-only.
+- On OpenBSD, use source build with `cargo`.
+
+## 2. Build from source
+
+```sh
+git clone https://github.com/telemt/telemt
+cd telemt
+cargo build --release
+./target/release/telemt --version
+```
+
+For low-RAM systems, this repository already uses `lto = "thin"` in release profile.
+
+## 3. Install binary and config
+
+```sh
+doas install -d -m 0755 /usr/local/bin
+doas install -m 0755 ./target/release/telemt /usr/local/bin/telemt
+
+doas install -d -m 0750 /etc/telemt
+doas install -m 0640 ./config.toml /etc/telemt/config.toml
+```
+
+## 4. Create runtime user
+
+```sh
+doas useradd -L daemon -s /sbin/nologin -d /var/empty _telemt
+```
+
+If `_telemt` already exists, continue.
+
+## 5. Install rc.d service
+
+Install the provided script:
+
+```sh
+doas install -m 0555 ./contrib/openbsd/telemt.rcd /etc/rc.d/telemt
+```
+
+Enable and start:
+
+```sh
+doas rcctl enable telemt
+# Optional: send daemon output to syslog
+#doas rcctl set telemt logger daemon.info
+
+doas rcctl start telemt
+```
+
+Service controls:
+
+```sh
+doas rcctl check telemt
+doas rcctl restart telemt
+doas rcctl stop telemt
+```
+
+## 6. Resource limits (recommended)
+
+OpenBSD rc.d can apply limits via login class. Add class `telemt` and assign it to `_telemt`.
+
+Example class entry:
+
+```text
+telemt:\
+    :openfiles-cur=8192:openfiles-max=16384:\
+    :datasize-cur=768M:datasize-max=1024M:\
+    :coredumpsize=0:\
+    :tc=daemon:
+```
+
+These values are conservative defaults for small and medium deployments.
+Increase `openfiles-*` only if logs show descriptor exhaustion under load.
+
+Then rebuild database and assign class:
+
+```sh
+doas cap_mkdb /etc/login.conf
+#doas usermod -L telemt _telemt
+```
+
+Uncomment `usermod` if you want this class bound to the Telemt user.
+
+## 7. Functional smoke test
+
+1. Validate service state:
+
+```sh
+doas rcctl check telemt
+```
+
+2. Check listener is present (replace 443 if needed):
+
+```sh
+netstat -n -f inet -p tcp | grep LISTEN | grep '\.443'
+```
+
+3. Verify process user:
+
+```sh
+ps -o user,pid,command -ax | grep telemt | grep -v grep
+```
+
+4. If startup fails, debug in foreground:
+
+```sh
+RUST_LOG=debug /usr/local/bin/telemt /etc/telemt/config.toml
+```
+
+## 8. OpenBSD-specific caveats
+
+- OpenBSD does not support per-socket keepalive retries/interval tuning in the same way as Linux.
+- Telemt source already uses target-aware cfg gates for keepalive setup.
+- Use rc.d/rcctl, not systemd.

docs/Quick_start/QUICK_START_GUIDE.en.md

@@ -1,3 +1,19 @@
+# Very quick start
+
+### One-command installation / update on re-run
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh
+```
+### Installing a specific version
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh -s -- 3.3.39
+```
+
+### Uninstall with full cleanup
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh -s -- purge
+```
+
 # Telemt via Systemd
 
 ## Installation
@@ -27,12 +43,12 @@ chmod +x /bin/telemt
 
 **0. Check port and generate secrets**
 
-The port you have selected for use should be MISSING from the list, when:
+The port you have selected for use should not be in the list:
 ```bash
 netstat -lnp
 ```
 
-Generate 16 bytes/32 characters HEX with OpenSSL or another way:
+Generate 16 bytes/32 characters in HEX format with OpenSSL or another way:
 ```bash
 openssl rand -hex 16
 ```
@@ -48,13 +64,18 @@ Save the obtained result somewhere. You will need it later!
 
 ---
 
-**1. Place your config to /etc/telemt.toml**
+**1. Place your config to /etc/telemt/telemt.toml**
+
+Create the config directory:
+```bash
+mkdir /etc/telemt
+```
 
 Open nano
 ```bash
-nano /etc/telemt.toml
+nano /etc/telemt/telemt.toml
 ```
-paste your config
+Insert your configuration:
 
 ```toml
 # === General Settings ===
@@ -67,6 +88,15 @@ classic = false
 secure = false
 tls = true
 
+[server]
+port = 443
+
+[server.api]
+enabled = true
+# listen = "127.0.0.1:9091"
+# whitelist = ["127.0.0.1/32"]
+# read_only = true
+
 # === Anti-Censorship & Masking ===
 [censorship]
 tls_domain = "petrovich.ru"
@@ -75,47 +105,74 @@ tls_domain = "petrovich.ru"
 # format: "username" = "32_hex_chars_secret"
 hello = "00000000000000000000000000000000"
 ```
+
 then Ctrl+S -> Ctrl+X to save
 
 > [!WARNING]
 > Replace the value of the hello parameter with the value you obtained in step 0.  
-> Replace the value of the tls_domain parameter with another website.
+> Additionally, change the value of the tls_domain parameter to a different website.
+> Changing the tls_domain parameter will break all links that use the old domain!
 
 ---
 
-**2. Create service on /etc/systemd/system/telemt.service**
+**2. Create telemt user**
+
+```bash
+useradd -d /opt/telemt -m -r -U telemt
+chown -R telemt:telemt /etc/telemt
+```
+
+**3. Create service in /etc/systemd/system/telemt.service**
 
 Open nano
 ```bash
 nano /etc/systemd/system/telemt.service
 ```
 
-paste this Systemd Module
+Insert this Systemd module:
 ```bash
 [Unit]
 Description=Telemt
-After=network.target
+After=network-online.target
+Wants=network-online.target
 
 [Service]
 Type=simple
-WorkingDirectory=/bin
-ExecStart=/bin/telemt /etc/telemt.toml
+User=telemt
+Group=telemt
+WorkingDirectory=/opt/telemt
+ExecStart=/bin/telemt /etc/telemt/telemt.toml
 Restart=on-failure
 LimitNOFILE=65536
+AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+NoNewPrivileges=true
 
 [Install]
 WantedBy=multi-user.target
 ```
 then Ctrl+S -> Ctrl+X to save
 
+reload systemd units
+```bash
+systemctl daemon-reload
+```
 
-**3.** To start it, enter the command `systemctl start telemt`
+**4.** To start it, enter the command `systemctl start telemt`
 
-**4.** To get status information, enter `systemctl status telemt`
+**5.** To get status information, enter `systemctl status telemt`
 
-**5.** For automatic startup at system boot, enter `systemctl enable telemt`
+**6.** For automatic startup at system boot, enter `systemctl enable telemt`
 
-**6.** To get the links, enter `journalctl -u telemt -n -g "links" --no-pager -o cat | tac`
+**7.** To get the link(s), enter:
+```bash
+curl -s http://127.0.0.1:9091/v1/users | jq -r '.data[] | "[\(.username)]", (.links.classic[]? | "classic: \(.)"), (.links.secure[]? | "secure: \(.)"), (.links.tls[]? | "tls: \(.)"), ""'
+```
+
+> Any number of people can use one link.
+
+> [!WARNING]
+> Only the command from step 7 can provide a working link. Do not try to create it yourself or copy it from anywhere if you are not sure what you are doing!
 
 ---
 
@@ -144,6 +201,8 @@ docker compose down
 docker build -t telemt:local .
 docker run --name telemt --restart unless-stopped \
   -p 443:443 \
+  -p 9090:9090 \
+  -p 9091:9091 \
   -e RUST_LOG=info \
   -v "$PWD/config.toml:/app/config.toml:ro" \
   --read-only \

docs/Quick_start/QUICK_START_GUIDE.ru.md

@@ -1,4 +1,20 @@
-# Telemt через Systemd
+# Очень быстрый старт
+
+### Установка одной командой / обновление при повторном запуске
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh
+```
+### Установка нужной версии
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh -s -- 3.3.39
+```
+
+### Удаление с полной очисткой
+```bash
+curl -fsSL https://raw.githubusercontent.com/telemt/telemt/main/install.sh | sh -s -- purge
+```
+
+# Telemt через Systemd вручную
 
 ## Установка
 
@@ -48,11 +64,16 @@ python3 -c 'import os; print(os.urandom(16).hex())'
 
 ---
 
-**1. Поместите свою конфигурацию в файл /etc/telemt.toml**
+**1. Поместите свою конфигурацию в файл /etc/telemt/telemt.toml**
+
+Создаём директорию для конфига:
+```bash
+mkdir /etc/telemt
+```
 
 Открываем nano
 ```bash
-nano /etc/telemt.toml
+nano /etc/telemt/telemt.toml
 ```
 Вставьте свою конфигурацию
 
@@ -67,6 +88,15 @@ classic = false
 secure = false
 tls = true
 
+[server]
+port = 443
+
+[server.api]
+enabled = true
+# listen = "127.0.0.1:9091"
+# whitelist = ["127.0.0.1/32"]
+# read_only = true
+
 # === Anti-Censorship & Masking ===
 [censorship]
 tls_domain = "petrovich.ru"
@@ -75,15 +105,24 @@ tls_domain = "petrovich.ru"
 # format: "username" = "32_hex_chars_secret"
 hello = "00000000000000000000000000000000"
 ```
+
 Затем нажмите Ctrl+S -> Ctrl+X, чтобы сохранить
 
 > [!WARNING]
 > Замените значение параметра hello на значение, которое вы получили в пункте 0.  
 > Так же замените значение параметра tls_domain на другой сайт.
+> Изменение параметра tls_domain сделает нерабочими все ссылки, использующие старый домен!
 
 ---
 
-**2. Создайте службу в /etc/systemd/system/telemt.service**
+**2. Создайте пользователя для telemt**
+
+```bash
+useradd -d /opt/telemt -m -r -U telemt
+chown -R telemt:telemt /etc/telemt
+```
+
+**3. Создайте службу в /etc/systemd/system/telemt.service**
 
 Открываем nano
 ```bash
@@ -94,30 +133,45 @@ nano /etc/systemd/system/telemt.service
 ```bash
 [Unit]
 Description=Telemt
-After=network.target
+After=network-online.target
+Wants=network-online.target
 
 [Service]
 Type=simple
-WorkingDirectory=/bin
-ExecStart=/bin/telemt /etc/telemt.toml
+User=telemt
+Group=telemt
+WorkingDirectory=/opt/telemt
+ExecStart=/bin/telemt /etc/telemt/telemt.toml
 Restart=on-failure
 LimitNOFILE=65536
+AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+NoNewPrivileges=true
 
 [Install]
 WantedBy=multi-user.target
 ```
 Затем нажмите Ctrl+S -> Ctrl+X, чтобы сохранить
 
+перезагрузите конфигурацию systemd
+```bash
+systemctl daemon-reload
+```
 
-**3.** Для запуска введите команду `systemctl start telemt`
+**4.** Для запуска введите команду `systemctl start telemt`
 
-**4.** Для получения информации о статусе введите `systemctl status telemt`
+**5.** Для получения информации о статусе введите `systemctl status telemt`
 
-**5.** Для автоматического запуска при запуске системы в введите `systemctl enable telemt`
+**6.** Для автоматического запуска при запуске системы в введите `systemctl enable telemt`
+
+**7.** Для получения ссылки/ссылок введите 
+```bash
+curl -s http://127.0.0.1:9091/v1/users | jq -r '.data[] | "[\(.username)]", (.links.classic[]? | "classic: \(.)"), (.links.secure[]? | "secure: \(.)"), (.links.tls[]? | "tls: \(.)"), ""'
+```
+> Одной ссылкой может пользоваться сколько угодно человек.
 
-**6.** Для получения ссылки введите `journalctl -u telemt -n -g "links" --no-pager -o cat | tac`
 > [!WARNING]
-> Рабочую ссылку может выдать только команда из 6 пункта. Не пытайтесь делать ее самостоятельно или копировать откуда-либо!
+> Рабочую ссылку может выдать только команда из 7 пункта. Не пытайтесь делать ее самостоятельно или копировать откуда-либо если вы не уверены в том, что делаете!
 
 ---
 
@@ -141,11 +195,13 @@ docker compose down
 > - По умолчанию публикуются порты 443:443, а контейнер запускается со сброшенными привилегиями (добавлена только `NET_BIND_SERVICE`)  
 > - Если вам действительно нужна сеть хоста (обычно это требуется только для некоторых конфигураций IPv6), раскомментируйте `network_mode: host`
 
-**Запуск в Docker Compose**
+**Запуск без Docker Compose**
 ```bash
 docker build -t telemt:local .
 docker run --name telemt --restart unless-stopped \
   -p 443:443 \
+  -p 9090:9090 \
+  -p 9091:9091 \
   -e RUST_LOG=info \
   -v "$PWD/config.toml:/app/config.toml:ro" \
   --read-only \

docs/Setup_examples/VPS_DOUBLE_HOP.en.md

@@ -0,0 +1,287 @@
+<img src="https://gist.githubusercontent.com/avbor/1f8a128e628f47249aae6e058a57610b/raw/19013276c035e91058e0a9799ab145f8e70e3ff5/scheme.svg">
+
+## Concept
+- **Server A** (__conditionally Russian Federation_):\
+  Entry point, receives Telegram proxy user traffic via **HAProxy** (port `443`)\
+  and sends it to the tunnel to Server **B**.\
+  Internal IP in the tunnel — `10.10.10.2`\
+  Port for HAProxy clients — `443\tcp`
+- **Server B** (_conditionally Netherlands_):\
+  Exit point, runs **telemt** and accepts client connections through Server **A**.\
+  The server must have unrestricted access to Telegram servers.\
+  Internal IP in the tunnel — `10.10.10.1`\
+  AmneziaWG port — `8443\udp`\
+  Port for telemt clients — `443\tcp`
+
+---
+
+## Step 1. Setting up the AmneziaWG tunnel (A <-> B)
+[AmneziaWG](https://github.com/amnezia-vpn/amneziawg-linux-kernel-module) must be installed on all servers.\
+All following commands are given for **Ubuntu 24.04**.\
+For RHEL-based distributions, installation instructions are available at the link above.
+
+### Installing AmneziaWG (Servers A and B)
+The following steps must be performed on each server:
+
+#### 1. Adding the AmneziaWG repository and installing required packages:
+```bash
+sudo apt install -y software-properties-common python3-launchpadlib gnupg2 linux-headers-$(uname -r) && \
+sudo add-apt-repository ppa:amnezia/ppa && \
+sudo apt-get install -y amneziawg
+```
+
+#### 2. Generating a unique key pair:
+```bash
+cd /etc/amnezia/amneziawg && \
+awg genkey | tee private.key | awg pubkey > public.key
+```
+
+As a result, you will get two files in the `/etc/amnezia/amneziawg` folder:\
+`private.key` - private, and\
+`public.key` - public server keys
+
+#### 3. Configuring network interfaces:
+Obfuscation parameters `S1`, `S2`, `H1`, `H2`, `H3`, `H4` must be strictly identical on both servers.\
+Parameters `Jc`, `Jmin` and `Jmax` can differ.\
+Parameters `I1-I5` ([Custom Protocol Signature](https://docs.amnezia.org/documentation/amnezia-wg/)) must be specified on the client side (Server **A**).
+
+Recommendations for choosing values:
+
+```text
+Jc — 1 ≤ Jc ≤ 128; from 4 to 12 inclusive
+Jmin — Jmax > Jmin < 1280*; recommended 8
+Jmax — Jmin < Jmax ≤ 1280*; recommended 80
+S1 — S1 ≤ 1132* (1280* - 148 = 1132); S1 + 56 ≠ S2;
+recommended range from 15 to 150 inclusive
+S2 — S2 ≤ 1188* (1280* - 92 = 1188);
+recommended range from 15 to 150 inclusive
+H1/H2/H3/H4 — must be unique and differ from each other;
+recommended range from 5 to 2147483647 inclusive
+
+* It is assumed that the Internet connection has an MTU of 1280.
+```
+
+> [!IMPORTANT]
+> It is recommended to use your own, unique values.\
+> You can use the [generator](https://htmlpreview.github.io/?https://gist.githubusercontent.com/avbor/955782b5c37b06240b243aa375baeac5/raw/13f5517ca473b47c412b9a99407066de973732bd/awg-gen.html) to select parameters.
+
+#### Server B Configuration (Netherlands):
+
+Create the interface configuration file (`awg0`)
+```bash
+nano /etc/amnezia/amneziawg/awg0.conf
+```
+
+File content
+```ini
+[Interface]
+Address = 10.10.10.1/24
+ListenPort = 8443
+PrivateKey = <PRIVATE_KEY_SERVER_B>
+SaveConfig = true
+Jc = 4
+Jmin = 8
+Jmax = 80
+S1 = 29
+S2 = 15
+S3 = 18
+S4 = 0
+H1 = 2087563914
+H2 = 188817757
+H3 = 101784570
+H4 = 432174303
+
+[Peer]
+PublicKey = <PUBLIC_KEY_SERVER_A>
+AllowedIPs = 10.10.10.2/32
+```
+`ListenPort` - the port on which the server will wait for connections, you can choose any free one.\
+`<PRIVATE_KEY_SERVER_B>` - the content of the `private.key` file from Server **B**.\
+`<PUBLIC_KEY_SERVER_A>` - the content of the `public.key` file from Server **A**.
+
+Open the port on the firewall (if enabled):
+```bash
+sudo ufw allow from <PUBLIC_IP_SERVER_A> to any port 8443 proto udp
+```
+
+`<PUBLIC_IP_SERVER_A>` - the external IP address of Server **A**.
+
+#### Server A Configuration (Russian Federation):
+Create the interface configuration file (awg0)
+
+```bash
+nano /etc/amnezia/amneziawg/awg0.conf
+```
+
+File content
+```ini
+[Interface]
+Address = 10.10.10.2/24
+PrivateKey = <PRIVATE_KEY_SERVER_A>
+Jc = 4
+Jmin = 8
+Jmax = 80
+S1 = 29
+S2 = 15
+S3 = 18
+S4 = 0
+H1 = 2087563914
+H2 = 188817757
+H3 = 101784570
+H4 = 432174303
+I1 = <b 0xc10000000108981eba846e21f74e00>
+I2 = <b 0xc20000000108981eba846e21f74e00>
+I3 = <b 0xc30000000108981eba846e21f74e00>
+I4 = <b 0x43981eba846e21f74e>
+I5 = <b 0x43981eba846e21f74e>
+
+[Peer]
+PublicKey = <PUBLIC_KEY_SERVER_B>
+Endpoint = <PUBLIC_IP_SERVER_B>:8443
+AllowedIPs = 10.10.10.1/32
+PersistentKeepalive = 25
+```
+
+`<PRIVATE_KEY_SERVER_A>` - the content of the `private.key` file from Server **A**.\
+`<PUBLIC_KEY_SERVER_B>` - the content of the `public.key` file from Server **B**.\
+`<PUBLIC_IP_SERVER_B>` - the public IP address of Server **B**.
+
+Enable the tunnel on both servers:
+```bash
+sudo systemctl enable --now awg-quick@awg0
+```
+
+Make sure Server B is accessible from Server A through the tunnel.
+```bash
+ping 10.10.10.1
+PING 10.10.10.1 (10.10.10.1) 56(84) bytes of data.
+64 bytes from 10.10.10.1: icmp_seq=1 ttl=64 time=35.1 ms
+64 bytes from 10.10.10.1: icmp_seq=2 ttl=64 time=35.0 ms
+64 bytes from 10.10.10.1: icmp_seq=3 ttl=64 time=35.1 ms
+^C
+```
+---
+
+## Step 2. Installing telemt on Server B (conditionally Netherlands)
+Installation and configuration are described [here](https://github.com/telemt/telemt/blob/main/docs/QUICK_START_GUIDE.ru.md) or [here](https://gitlab.com/An0nX/telemt-docker#-quick-start-docker-compose).\
+It is assumed that telemt expects connections on port `443\tcp`.
+
+In the telemt config, you must enable the `Proxy` protocol and restrict connections to it only through the tunnel.
+```toml
+[server]
+port = 443
+listen_addr_ipv4 = "10.10.10.1"
+proxy_protocol = true
+```
+
+Also, for correct link generation, specify the FQDN or IP address and port of Server `A`
+```toml
+[general.links]
+show = "*"
+public_host = "<FQDN_OR_IP_SERVER_A>"
+public_port = 443
+```
+
+Open the port on the firewall (if enabled):
+```bash
+sudo ufw allow from 10.10.10.2 to any port 443 proto tcp
+```
+
+---
+
+## Step 3. Configuring HAProxy on Server A (Russian Federation)
+Since the version in the standard Ubuntu repository is relatively old, it makes sense to use the official Docker image.\
+[Instructions](https://docs.docker.com/engine/install/ubuntu/) for installing Docker on Ubuntu.
+
+> [!WARNING]
+> By default, regular users do not have rights to use ports < 1024.
+> Attempts to run HAProxy on port 443 can lead to errors:
+> ```
+> [ALERT] (8) : Binding [/usr/local/etc/haproxy/haproxy.cfg:17] for frontend tcp_in_443: 
+> protocol tcpv4: cannot bind socket (Permission denied) for [0.0.0.0:443].
+> ```
+> There are two simple ways to bypass this restriction, choose one:
+> 1. At the OS level, change the net.ipv4.ip_unprivileged_port_start setting to allow users to use all ports:
+> ```
+> echo "net.ipv4.ip_unprivileged_port_start = 0" | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
+> ```
+> or
+> 
+> 2. Run HAProxy as root:
+> Uncomment the `user: "root"` parameter in docker-compose.yaml.
+
+#### Create a folder for HAProxy:
+```bash
+mkdir -p /opt/docker-compose/haproxy && cd $_
+```
+
+#### Create the docker-compose.yaml file
+`nano docker-compose.yaml`
+
+File content
+```yaml
+services:
+  haproxy:
+    image: haproxy:latest
+    container_name: haproxy
+    restart: unless-stopped
+    # user: "root"
+    network_mode: "host"
+    volumes:
+      - ./haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg:ro
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "1m"
+        max-file: "1"
+```
+
+#### Create the haproxy.cfg config file
+Accept connections on port 443\tcp and send them through the tunnel to Server `B` 10.10.10.1:443
+
+`nano haproxy.cfg`
+
+File content
+
+```haproxy
+global
+    log stdout format raw local0
+    maxconn 10000
+
+defaults
+    log     global
+    mode    tcp
+    option  tcplog
+    option  clitcpka
+    option  srvtcpka
+    timeout connect 5s
+    timeout client  2h
+    timeout server  2h
+    timeout check   5s
+
+frontend tcp_in_443
+    bind *:443
+    maxconn 8000
+    option tcp-smart-accept
+    default_backend telemt_nodes
+
+backend telemt_nodes
+    option tcp-smart-connect
+    server server_a 10.10.10.1:443 check inter 5s rise 2 fall 3 send-proxy-v2
+
+
+```
+> [!WARNING]
+> **The file must end with an empty line, otherwise HAProxy will not start!**
+
+#### Allow port 443\tcp in the firewall (if enabled)
+```bash
+sudo ufw allow 443/tcp
+```
+
+#### Start the HAProxy container
+```bash
+docker compose up -d
+```
+
+If everything is configured correctly, you can now try connecting Telegram clients using links from the telemt log\api.

docs/Setup_examples/VPS_DOUBLE_HOP.ru.md

@@ -0,0 +1,291 @@
+<img src="https://gist.githubusercontent.com/avbor/1f8a128e628f47249aae6e058a57610b/raw/19013276c035e91058e0a9799ab145f8e70e3ff5/scheme.svg">
+
+## Концепция
+- **Сервер A** (_РФ_):\
+  Точка входа, принимает трафик пользователей Telegram-прокси через **HAProxy** (порт `443`)\
+  и отправляет в туннель на Сервер **B**.\
+  Внутренний IP в туннеле — `10.10.10.2`\
+  Порт для клиентов HAProxy — `443\tcp`
+- **Сервер B** (_условно Нидерланды_):\
+  Точка выхода, на нем работает **telemt** и принимает подключения клиентов через Сервер **A**.\
+  На сервере должен быть неограниченный доступ до серверов Telegram.\
+  Внутренний IP в туннеле — `10.10.10.1`\
+  Порт AmneziaWG — `8443\udp`\
+  Порт для клиентов telemt — `443\tcp`
+
+---
+
+## Шаг 1. Настройка туннеля AmneziaWG (A <-> B)
+
+На всех серверах необходимо установить [amneziawg](https://github.com/amnezia-vpn/amneziawg-linux-kernel-module).\
+Далее все команды даны для **Ununtu 24.04**.\
+Для RHEL-based дистрибутивов инструкция по установке есть по ссылке выше.
+
+### Установка AmneziaWG (Сервера A и B)
+На каждом из серверов необходимо выполнить следующие шаги:
+
+#### 1. Добавление репозитория AmneziaWG и установка необходимых пакетов:
+```bash
+sudo apt install -y software-properties-common python3-launchpadlib gnupg2 linux-headers-$(uname -r) && \
+sudo add-apt-repository ppa:amnezia/ppa && \
+sudo apt-get install -y amneziawg
+```
+ 
+#### 2. Генерация уникальной пары ключей:
+```bash
+cd /etc/amnezia/amneziawg && \
+awg genkey | tee private.key | awg pubkey > public.key
+```
+В результате вы получите в папке `/etc/amnezia/amneziawg` два файла:\
+`private.key` - приватный и\
+`public.key` - публичный ключи сервера
+
+#### 3. Настройка сетевых интерфейсов:
+
+Параметры обфускации `S1`, `S2`, `H1`, `H2`, `H3`, `H4` должны быть строго идентичными на обоих серверах.\
+Параметры `Jc`, `Jmin` и `Jmax` могут отличатся.\
+Параметры `I1-I5` ([Custom Protocol Signature](https://docs.amnezia.org/documentation/amnezia-wg/)) нужно указывать на стороне _клиента_ (Сервер **А**).
+
+Рекомендации по выбору значений:
+```text
+Jc — 1 ≤ Jc ≤ 128; от 4 до 12 включительно
+Jmin — Jmax > Jmin < 1280*; рекомендовано 8
+Jmax — Jmin < Jmax ≤ 1280*; рекомендовано 80
+S1 — S1 ≤ 1132* (1280* - 148 = 1132); S1 + 56 ≠ S2;
+рекомендованный диапазон от 15 до 150 включительно
+S2 — S2 ≤ 1188* (1280* - 92 = 1188);
+рекомендованный диапазон от 15 до 150 включительно
+H1/H2/H3/H4 — должны быть уникальны и отличаться друг от друга;
+рекомендованный диапазон от 5 до 2147483647 включительно
+
+* Предполагается, что подключение к Интернету имеет MTU 1280.
+```
+> [!IMPORTANT]
+> Рекомендуется использовать собственные, уникальные значения.\
+> Для выбора параметров можете воспользоваться [генератором](https://htmlpreview.github.io/?https://gist.githubusercontent.com/avbor/955782b5c37b06240b243aa375baeac5/raw/13f5517ca473b47c412b9a99407066de973732bd/awg-gen.html).
+
+#### Конфигурация Сервера B (_Нидерланды_):
+
+Создаем файл конфигурации интерфейса (`awg0`)
+```bash
+nano /etc/amnezia/amneziawg/awg0.conf
+```
+
+Содержимое файла
+```ini
+[Interface]
+Address = 10.10.10.1/24
+ListenPort = 8443
+PrivateKey = <PRIVATE_KEY_SERVER_B>
+SaveConfig = true
+Jc = 4
+Jmin = 8
+Jmax = 80
+S1 = 29
+S2 = 15
+S3 = 18
+S4 = 0
+H1 = 2087563914
+H2 = 188817757
+H3 = 101784570
+H4 = 432174303
+
+[Peer]
+PublicKey = <PUBLIC_KEY_SERVER_A>
+AllowedIPs = 10.10.10.2/32
+```
+
+`ListenPort` - порт, на котором сервер будет ждать подключения, можете выбрать любой свободный.\
+`<PRIVATE_KEY_SERVER_B>` - содержимое файла `private.key` с сервера **B**.\
+`<PUBLIC_KEY_SERVER_A>` - содержимое файла `public.key` с сервера **A**.
+
+Открываем порт на фаерволе (если включен):
+```bash
+sudo ufw allow from <PUBLIC_IP_SERVER_A> to any port 8443 proto udp
+```
+
+`<PUBLIC_IP_SERVER_A>` - внешний IP адрес Сервера **A**.
+
+#### Конфигурация Сервера A (_РФ_):
+
+Создаем файл конфигурации интерфейса (`awg0`)
+```bash
+nano /etc/amnezia/amneziawg/awg0.conf
+```
+
+Содержимое файла
+```ini
+[Interface]
+Address = 10.10.10.2/24
+PrivateKey = <PRIVATE_KEY_SERVER_A>
+Jc = 4
+Jmin = 8
+Jmax = 80
+S1 = 29
+S2 = 15
+S3 = 18
+S4 = 0
+H1 = 2087563914
+H2 = 188817757
+H3 = 101784570
+H4 = 432174303
+I1 = <b 0xc10000000108981eba846e21f74e00>
+I2 = <b 0xc20000000108981eba846e21f74e00>
+I3 = <b 0xc30000000108981eba846e21f74e00>
+I4 = <b 0x43981eba846e21f74e>
+I5 = <b 0x43981eba846e21f74e>
+
+[Peer]
+PublicKey = <PUBLIC_KEY_SERVER_B>
+Endpoint = <PUBLIC_IP_SERVER_B>:8443
+AllowedIPs = 10.10.10.1/32
+PersistentKeepalive = 25
+```
+
+`<PRIVATE_KEY_SERVER_A>` - содержимое файла `private.key` с сервера **A**.\
+`<PUBLIC_KEY_SERVER_B>` - содержимое файла `public.key` с сервера **B**.\
+`<PUBLIC_IP_SERVER_B>` - публичный IP адресс сервера **B**.
+
+#### Включаем туннель на обоих серверах:
+```bash
+sudo systemctl enable --now awg-quick@awg0 
+```
+
+Убедитесь, что с Сервера `A` доступен Сервер `B` через туннель.
+```bash
+ping 10.10.10.1
+PING 10.10.10.1 (10.10.10.1) 56(84) bytes of data.
+64 bytes from 10.10.10.1: icmp_seq=1 ttl=64 time=35.1 ms
+64 bytes from 10.10.10.1: icmp_seq=2 ttl=64 time=35.0 ms
+64 bytes from 10.10.10.1: icmp_seq=3 ttl=64 time=35.1 ms
+^C
+
+```
+
+---
+
+## Шаг 2. Установка telemt на Сервере B (_условно Нидерланды_)
+
+Установка и настройка описаны [здесь](https://github.com/telemt/telemt/blob/main/docs/QUICK_START_GUIDE.ru.md) или [здесь](https://gitlab.com/An0nX/telemt-docker#-quick-start-docker-compose).\
+Подразумевается что telemt ожидает подключения на порту `443\tcp`.
+
+В конфиге telemt необходимо включить протокол `Proxy` и ограничить подключения к нему только через туннель.
+
+```toml
+[server]
+port = 443
+listen_addr_ipv4 = "10.10.10.1"
+proxy_protocol = true
+```
+
+А также, для правильной генерации ссылок, указать FQDN или IP адрес и порт Сервера `A` 
+
+```toml
+[general.links]
+show = "*"
+public_host = "<FQDN_OR_IP_SERVER_A>"
+public_port = 443
+```
+
+Открываем порт на фаерволе (если включен):
+```bash
+sudo ufw allow from 10.10.10.2 to any port 443 proto tcp
+```
+
+---
+
+### Шаг 3. Настройка HAProxy на Сервере A (_РФ_)
+
+Т.к. в стандартном репозитории Ubuntu версия относительно старая, имеет смысл воспользоваться официальным образом Docker.\
+[Инструкция](https://docs.docker.com/engine/install/ubuntu/) по установке Docker на Ubuntu.
+
+> [!WARNING]
+> По умолчанию у обычных пользователей нет прав на использование портов < 1024.\
+> Попытки запустить HAProxy на 443 порту могут приводить к ошибкам:
+> ```
+> [ALERT] (8) : Binding [/usr/local/etc/haproxy/haproxy.cfg:17] for frontend tcp_in_443: 
+> protocol tcpv4: cannot bind socket (Permission denied) for [0.0.0.0:443].
+> ```
+> Есть два простых способа обойти это ограничение, выберите что-то одно:
+> 1. На уровне ОС изменить настройку net.ipv4.ip_unprivileged_port_start, разрешив пользователям использовать все порты:
+> ```
+> echo "net.ipv4.ip_unprivileged_port_start = 0" | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
+> ```
+> или
+> 
+> 2. Запустить HAProxy под root:\
+> Раскомментируйте в docker-compose.yaml параметр `user: "root"`.
+
+#### Создаем папку для HAProxy:
+```bash
+mkdir -p /opt/docker-compose/haproxy && cd $_
+```
+#### Создаем файл docker-compose.yaml
+
+`nano docker-compose.yaml`
+
+Содержимое файла
+```yaml
+services:
+  haproxy:
+    image: haproxy:latest
+    container_name: haproxy
+    restart: unless-stopped
+    # user: "root"
+    network_mode: "host"
+    volumes:
+      - ./haproxy.cfg:/usr/local/etc/haproxy/haproxy.cfg:ro
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "1m"
+        max-file: "1"
+```
+#### Создаем файл конфига haproxy.cfg
+Принимаем подключения на порту 443\tcp и отправляем их через туннель на Сервер `B` 10.10.10.1:443
+
+`nano haproxy.cfg`
+
+Содержимое файла
+```haproxy
+global
+    log stdout format raw local0
+    maxconn 10000
+
+defaults
+    log     global
+    mode    tcp
+    option  tcplog
+    option  clitcpka
+    option  srvtcpka
+    timeout connect 5s
+    timeout client  2h
+    timeout server  2h
+    timeout check   5s
+
+frontend tcp_in_443
+    bind *:443
+    maxconn 8000
+    option tcp-smart-accept
+    default_backend telemt_nodes
+
+backend telemt_nodes
+    option tcp-smart-connect
+    server server_a 10.10.10.1:443 check inter 5s rise 2 fall 3 send-proxy-v2
+
+
+```
+>[!WARNING]
+>**Файл должен заканчиваться пустой строкой, иначе HAProxy не запустится!**
+
+#### Разрешаем порт 443\tcp в фаерволе (если включен)
+```bash
+sudo ufw allow 443/tcp
+```
+
+#### Запускаем контейнер HAProxy
+```bash
+docker compose up -d
+```
+
+Если все настроено верно, то теперь можно пробовать подключить клиентов Telegram с использованием ссылок из лога\api telemt.

install.sh

@@ -1,73 +1,925 @@
-sudo bash -c '
-set -e
+#!/bin/sh
+set -eu
 
-# --- Проверка на существующую установку ---
-if systemctl list-unit-files | grep -q telemt.service; then
-    # --- РЕЖИМ ОБНОВЛЕНИЯ ---
-    echo "--- Обнаружена существующая установка Telemt. Запускаю обновление... ---"
+REPO="${REPO:-telemt/telemt}"
+BIN_NAME="${BIN_NAME:-telemt}"
+INSTALL_DIR="${INSTALL_DIR:-/bin}"
+CONFIG_DIR="${CONFIG_DIR:-/etc/telemt}"
+CONFIG_FILE="${CONFIG_FILE:-${CONFIG_DIR}/telemt.toml}"
+WORK_DIR="${WORK_DIR:-/opt/telemt}"
+TLS_DOMAIN="${TLS_DOMAIN:-petrovich.ru}"
+SERVER_PORT="${SERVER_PORT:-443}"
+USER_SECRET=""
+AD_TAG=""
+SERVICE_NAME="telemt"
+TEMP_DIR=""
+SUDO=""
+CONFIG_PARENT_DIR=""
+SERVICE_START_FAILED=0
 
-    echo "[*] Остановка службы telemt..."
-    systemctl stop telemt || true # Игнорируем ошибку, если служба уже остановлена
+PORT_PROVIDED=0
+SECRET_PROVIDED=0
+AD_TAG_PROVIDED=0
+DOMAIN_PROVIDED=0
+LANG_PROVIDED=0
 
-    echo "[1/2] Скачивание последней версии Telemt..."
-    wget -qO- "https://github.com/telemt/telemt/releases/latest/download/telemt-$(uname -m)-linux-$(ldd --version 2>&1 | grep -iq musl && echo musl || echo gnu).tar.gz" | tar -xz
+ACTION="install"
+TARGET_VERSION="${VERSION:-latest}"
+LANG_CHOICE="en"
 
-    echo "[1/2] Замена исполняемого файла в /usr/local/bin..."
-    mv telemt /usr/local/bin/telemt
-    chmod +x /usr/local/bin/telemt
+set_language() {
+    case "$1" in
+        ru)
+            L_ERR_DOMAIN_REQ="требует аргумент (домен)."
+            L_ERR_PORT_REQ="требует аргумент (порт)."
+            L_ERR_PORT_NUM="Порт должен быть числом."
+            L_ERR_PORT_RANGE="Порт должен быть от 1 до 65535."
+            L_ERR_SECRET_REQ="требует аргумент (секрет)."
+            L_ERR_SECRET_HEX="Секрет должен содержать только HEX символы."
+            L_ERR_SECRET_LEN="Секрет должен состоять ровно из 32 символов."
+            L_ERR_ADTAG_REQ="требует аргумент (ad_tag)."
+            L_ERR_UNKNOWN_OPT="Неизвестная опция:"
+            L_WARN_EXTRA_ARG="Игнорируется лишний аргумент:"
+            L_ERR_REQ_ARG="требует аргумент (1, 2, en или ru)."
+            L_ERR_EMPTY_VAR="не может быть пустым."
+            L_ERR_INV_VER="Недопустимые символы в версии."
+            L_ERR_INV_BIN="Недопустимые символы в BIN_NAME."
+            L_ERR_ROOT="Для работы скрипта требуются права root или sudo."
+            L_ERR_SUDO_TTY="sudo требует пароль, но терминал (TTY) не обнаружен."
+            L_ERR_DIR_CHECK="Ошибка: конфиг является директорией."
+            L_ERR_CMD_NOT_FOUND="Необходимая команда не найдена:"
+            L_ERR_NO_DL_TOOL="Не установлен curl или wget."
+            L_ERR_NO_CP_TOOL="Необходима утилита cp или install."
+            L_WARN_NO_NET_TOOL="Утилиты сети не найдены. Проверка порта пропущена."
+            L_INFO_PORT_IGNORE="Порт занят текущим процессом телеметрии. Игнорируем."
+            L_ERR_PORT_IN_USE="Порт уже занят другим процессом:"
+            L_ERR_PORT_FREE="Освободите порт или укажите другой и попробуйте снова."
+            L_ERR_UNSUP_ARCH="Неподдерживаемая архитектура:"
+            L_ERR_CREATE_GRP="Не удалось создать группу"
+            L_ERR_CREATE_USR="Не удалось создать пользователя"
+            L_ERR_MKDIR="Не удалось создать директории"
+            L_ERR_INSTALL_DIR="не является директорией."
+            L_ERR_BIN_INSTALL="Не удалось установить бинарный файл"
+            L_ERR_BIN_COPY="Не удалось скопировать бинарный файл"
+            L_ERR_BIN_EXEC="Бинарный файл не исполняемый."
+            L_ERR_GEN_SEC="Не удалось сгенерировать секрет."
+            L_INFO_CONF_EXISTS="Конфиг уже существует. Обновление параметров..."
+            L_INFO_UPD_PORT="Обновлен порт:"
+            L_INFO_UPD_SEC="Обновлен секрет для пользователя 'hello'"
+            L_INFO_UPD_DOM="Обновлен tls_domain:"
+            L_INFO_UPD_TAG="Обновлен ad_tag"
+            L_ERR_CONF_INST="Не удалось установить конфиг"
+            L_INFO_CONF_OK="Конфиг успешно создан."
+            L_INFO_CONF_SEC="Настроен секрет для пользователя 'hello':"
+            L_WARN_SVC_FAIL="Не удалось запустить службу"
+            L_INFO_MANUAL_START="Менеджер служб не найден. Запустите вручную:"
+            L_INFO_UNINST_START="Начинается удаление"
+            L_U_STAGE_1=">>> Этап 1: Остановка служб"
+            L_U_STAGE_2=">>> Этап 2: Удаление конфигурации службы"
+            L_U_STAGE_3=">>> Этап 3: Завершение процессов пользователя"
+            L_U_STAGE_4=">>> Этап 4: Удаление бинарного файла"
+            L_U_STAGE_5=">>> Этап 5: Полная очистка (конфиг, данные, пользователь)"
+            L_INFO_KEEP_CONF="Примечание: Конфигурация сохранена. Используйте 'purge' для очистки."
+            L_INFO_I_START="Начинается установка"
+            L_I_STAGE_1=">>> Этап 1: Проверка окружения и зависимостей"
+            L_I_STAGE_1_5=">>> Этап 1.5: Интерактивная настройка"
+            L_I_PROMPT_DOM="\nПожалуйста, укажите домен TLS\nНажмите Enter, чтобы оставить по умолчанию [%s]: "
+            L_WARN_NO_TTY="Интерактивный режим недоступен (нет TTY). Используется:"
+            L_I_STAGE_2=">>> Этап 2: Загрузка архива"
+            L_ERR_TMP_DIR="Не удалось создать временную директорию"
+            L_ERR_TMP_INV="Временная директория недействительна"
+            L_INFO_FALLBACK="Сборка x86_64-v3 не найдена, откат к стандартной x86_64..."
+            L_ERR_DL_FAIL="Ошибка загрузки архива"
+            L_I_STAGE_3=">>> Этап 3: Распаковка архива"
+            L_ERR_EXTRACT="Ошибка распаковки архива."
+            L_ERR_BIN_NOT_FOUND="Бинарный файл не найден в архиве"
+            L_I_STAGE_4=">>> Этап 4: Настройка окружения (Юзер, Группа, Папки)"
+            L_I_STAGE_5=">>> Этап 5: Установка бинарного файла"
+            L_I_STAGE_6=">>> Этап 6: Генерация/Обновление конфигурации"
+            L_I_STAGE_7=">>> Этап 7: Установка и запуск службы"
+            L_OUT_WARN_H="УСТАНОВКА ЗАВЕРШЕНА С ПРЕДУПРЕЖДЕНИЯМИ"
+            L_OUT_WARN_D="Служба установлена, но не запустилась.\nПожалуйста, проверьте логи.\n"
+            L_OUT_SUCC_H="УСТАНОВКА УСПЕШНО ЗАВЕРШЕНА"
+            L_OUT_UNINST_H="УДАЛЕНИЕ ЗАВЕРШЕНО"
+            L_OUT_LINK="Ваша ссылка для подключения к Telegram Proxy:\n"
+            ;;
+        *)
+            L_ERR_DOMAIN_REQ="requires a domain argument."
+            L_ERR_PORT_REQ="requires a port argument."
+            L_ERR_PORT_NUM="Port must be a valid number."
+            L_ERR_PORT_RANGE="Port must be between 1 and 65535."
+            L_ERR_SECRET_REQ="requires a secret argument."
+            L_ERR_SECRET_HEX="Secret must contain only hex characters."
+            L_ERR_SECRET_LEN="Secret must be exactly 32 chars."
+            L_ERR_ADTAG_REQ="requires an ad_tag argument."
+            L_ERR_UNKNOWN_OPT="Unknown option:"
+            L_WARN_EXTRA_ARG="Ignoring extra argument:"
+            L_ERR_REQ_ARG="requires an argument (1, 2, en, ru)."
+            L_ERR_EMPTY_VAR="cannot be empty."
+            L_ERR_INV_VER="Invalid characters in version."
+            L_ERR_INV_BIN="Invalid characters in BIN_NAME."
+            L_ERR_ROOT="This script requires root or sudo."
+            L_ERR_SUDO_TTY="sudo requires a password, but no TTY detected."
+            L_ERR_DIR_CHECK="Safety check failed: Config is a directory."
+            L_ERR_CMD_NOT_FOUND="Required command not found:"
+            L_ERR_NO_DL_TOOL="Neither curl nor wget is installed."
+            L_ERR_NO_CP_TOOL="Need cp or install."
+            L_WARN_NO_NET_TOOL="Network tools not found. Skipping port check."
+            L_INFO_PORT_IGNORE="Port is in use by telemt. Ignoring as it will be restarted."
+            L_ERR_PORT_IN_USE="Port is already in use by another process:"
+            L_ERR_PORT_FREE="Please free the port or change it and try again."
+            L_ERR_UNSUP_ARCH="Unsupported architecture:"
+            L_ERR_CREATE_GRP="Cannot create group"
+            L_ERR_CREATE_USR="Cannot create user"
+            L_ERR_MKDIR="Failed to create directories"
+            L_ERR_INSTALL_DIR="is not a directory."
+            L_ERR_BIN_INSTALL="Failed to install binary"
+            L_ERR_BIN_COPY="Failed to copy binary"
+            L_ERR_BIN_EXEC="Binary not executable."
+            L_ERR_GEN_SEC="Failed to generate secret."
+            L_INFO_CONF_EXISTS="Config already exists. Updating parameters..."
+            L_INFO_UPD_PORT="Updated port:"
+            L_INFO_UPD_SEC="Updated secret for user 'hello'"
+            L_INFO_UPD_DOM="Updated tls_domain:"
+            L_INFO_UPD_TAG="Updated ad_tag"
+            L_ERR_CONF_INST="Failed to install config"
+            L_INFO_CONF_OK="Config created successfully."
+            L_INFO_CONF_SEC="Configured secret for user 'hello':"
+            L_WARN_SVC_FAIL="Failed to start service"
+            L_INFO_MANUAL_START="Service manager not found. Start manually:"
+            L_INFO_UNINST_START="Starting uninstallation of"
+            L_U_STAGE_1=">>> Stage 1: Stopping services"
+            L_U_STAGE_2=">>> Stage 2: Removing service configuration"
+            L_U_STAGE_3=">>> Stage 3: Terminating user processes"
+            L_U_STAGE_4=">>> Stage 4: Removing binary"
+            L_U_STAGE_5=">>> Stage 5: Purging configuration, data, and user"
+            L_INFO_KEEP_CONF="Note: Configuration kept. Run with 'purge' to remove completely."
+            L_INFO_I_START="Starting installation of"
+            L_I_STAGE_1=">>> Stage 1: Verifying environment and dependencies"
+            L_I_STAGE_1_5=">>> Stage 1.5: Interactive Setup"
+            L_I_PROMPT_DOM="\nPlease specify the TLS Domain\nPress Enter to keep default [%s]: "
+            L_WARN_NO_TTY="Interactive mode unavailable (no TTY). Using:"
+            L_I_STAGE_2=">>> Stage 2: Downloading archive"
+            L_ERR_TMP_DIR="Temp directory creation failed"
+            L_ERR_TMP_INV="Temp directory is invalid or was not created"
+            L_INFO_FALLBACK="x86_64-v3 build not found, falling back to standard x86_64..."
+            L_ERR_DL_FAIL="Download failed"
+            L_I_STAGE_3=">>> Stage 3: Extracting archive"
+            L_ERR_EXTRACT="Extraction failed."
+            L_ERR_BIN_NOT_FOUND="Binary not found in archive"
+            L_I_STAGE_4=">>> Stage 4: Setting up environment (User, Group, Directories)"
+            L_I_STAGE_5=">>> Stage 5: Installing binary"
+            L_I_STAGE_6=">>> Stage 6: Generating/Updating configuration"
+            L_I_STAGE_7=">>> Stage 7: Installing and starting service"
+            L_OUT_WARN_H="INSTALLATION COMPLETED WITH WARNINGS"
+            L_OUT_WARN_D="The service was installed but failed to start.\nPlease check the logs to determine the issue.\n"
+            L_OUT_SUCC_H="INSTALLATION SUCCESS"
+            L_OUT_UNINST_H="UNINSTALLATION COMPLETE"
+            L_OUT_LINK="Your Telegram Proxy connection link:\n"
+            ;;
+    esac
+}
 
-    echo "[2/2] Запуск службы..."
-    systemctl start telemt
+set_language "$LANG_CHOICE"
 
-    echo "--- Обновление Telemt успешно завершено! ---"
-    echo
-    echo "Для проверки статуса службы выполните:"
-    echo "   systemctl status telemt"
+while [ $# -gt 0 ]; do
+    case "$1" in
+        -h|--help) ACTION="help"; shift ;;
+        -l|--lang)
+            if [ "$#" -lt 2 ] || [ -z "$2" ]; then
+                printf '[ERROR] %s %s\n' "$1" "$L_ERR_REQ_ARG" >&2; exit 1
+            fi
+            case "$2" in
+                ru|2) LANG_CHOICE="ru"; set_language "$LANG_CHOICE"; LANG_PROVIDED=1 ;;
+                en|1) LANG_CHOICE="en"; set_language "$LANG_CHOICE"; LANG_PROVIDED=1 ;;
+                *) printf '[ERROR] %s %s\n' "$1" "$L_ERR_REQ_ARG" >&2; exit 1 ;;
+            esac
+            shift 2 ;;
+        -d|--domain)
+            if [ "$#" -lt 2 ] || [ -z "$2" ]; then
+                printf '[ERROR] %s %s\n' "$1" "$L_ERR_DOMAIN_REQ" >&2; exit 1
+            fi
+            TLS_DOMAIN="$2"; DOMAIN_PROVIDED=1; shift 2 ;;
+        -p|--port)
+            if [ "$#" -lt 2 ] || [ -z "$2" ]; then
+                printf '[ERROR] %s %s\n' "$1" "$L_ERR_PORT_REQ" >&2; exit 1
+            fi
+            case "$2" in
+                *[!0-9]*) printf '[ERROR] %s\n' "$L_ERR_PORT_NUM" >&2; exit 1 ;;
+            esac
+            port_num="$(printf '%s\n' "$2" | sed 's/^0*//')"
+            [ -z "$port_num" ] && port_num="0"
+            if [ "${#port_num}" -gt 5 ] || [ "$port_num" -lt 1 ] || [ "$port_num" -gt 65535 ]; then
+                printf '[ERROR] %s\n' "$L_ERR_PORT_RANGE" >&2; exit 1
+            fi
+            SERVER_PORT="$port_num"; PORT_PROVIDED=1; shift 2 ;;
+        -s|--secret)
+            if [ "$#" -lt 2 ] || [ -z "$2" ]; then
+                printf '[ERROR] %s %s\n' "$1" "$L_ERR_SECRET_REQ" >&2; exit 1
+            fi
+            case "$2" in
+                *[!0-9a-fA-F]*) printf '[ERROR] %s\n' "$L_ERR_SECRET_HEX" >&2; exit 1 ;;
+            esac
+            if [ "${#2}" -ne 32 ]; then
+                printf '[ERROR] %s\n' "$L_ERR_SECRET_LEN" >&2; exit 1
+            fi
+            USER_SECRET="$2"; SECRET_PROVIDED=1; shift 2 ;;
+        -a|--ad-tag|--ad_tag)
+            if [ "$#" -lt 2 ] || [ -z "$2" ]; then
+                printf '[ERROR] %s %s\n' "$1" "$L_ERR_ADTAG_REQ" >&2; exit 1
+            fi
+            AD_TAG="$2"; AD_TAG_PROVIDED=1; shift 2 ;;
+        uninstall|--uninstall)
+            if [ "$ACTION" != "purge" ]; then ACTION="uninstall"; fi
+            shift ;;
+        purge|--purge) ACTION="purge"; shift ;;
+        install|--install) ACTION="install"; shift ;;
+        -*) printf '[ERROR] %s %s\n' "$L_ERR_UNKNOWN_OPT" "$1" >&2; exit 1 ;;
+        *)
+            if [ "$ACTION" = "install" ]; then TARGET_VERSION="$1"
+            else printf '[WARNING] %s %s\n' "$L_WARN_EXTRA_ARG" "$1" >&2; fi
+            shift ;;
+    esac
+done
 
-else
-    # --- РЕЖИМ НОВОЙ УСТАНОВКИ ---
-    echo "--- Начало автоматической установки Telemt ---"
-
-    # Шаг 1: Скачивание и установка бинарного файла
-    echo "[1/5] Скачивание последней версии Telemt..."
-    wget -qO- "https://github.com/telemt/telemt/releases/latest/download/telemt-$(uname -m)-linux-$(ldd --version 2>&1 | grep -iq musl && echo musl || echo gnu).tar.gz" | tar -xz
-
-    echo "[1/5] Перемещение исполняемого файла в /usr/local/bin и установка прав..."
-    mv telemt /usr/local/bin/telemt
-    chmod +x /usr/local/bin/telemt
-
-    # Шаг 2: Генерация секрета
-    echo "[2/5] Генерация секретного ключа..."
-    SECRET=$(openssl rand -hex 16)
-
-    # Шаг 3: Создание файла конфигурации
-    echo "[3/5] Создание файла конфигурации /etc/telemt.toml..."
-    printf "# === General Settings ===\n[general]\n[general.modes]\nclassic = false\nsecure = false\ntls = true\n\n# === Anti-Censorship & Masking ===\n[censorship]\n# !!! ВАЖНО: Замените на ваш домен или домен, который вы хотите использовать для маскировки !!!\ntls_domain = \"petrovich.ru\"\n\n[access.users]\nhello = \"%s\"\n" "$SECRET" > /etc/telemt.toml
-
-    # Шаг 4: Создание службы Systemd
-    echo "[4/5] Создание службы systemd..."
-    printf "[Unit]\nDescription=Telemt Proxy\nAfter=network.target\n\n[Service]\nType=simple\nExecStart=/usr/local/bin/telemt /etc/telemt.toml\nRestart=on-failure\nRestartSec=5\nLimitNOFILE=65536\n\n[Install]\nWantedBy=multi-user.target\n" > /etc/systemd/system/telemt.service
-
-    # Шаг 5: Запуск службы
-    echo "[5/5] Перезагрузка systemd, запуск и включение службы telemt..."
-    systemctl daemon-reload
-    systemctl start telemt
-    systemctl enable telemt
-
-    echo "--- Установка и запуск Telemt успешно завершены! ---"
-    echo
-    echo "ВАЖНАЯ ИНФОРМАЦИЯ:"
-    echo "==================="
-    echo "1. Вам НЕОБХОДИМО отредактировать файл /etc/telemt.toml и заменить '\''petrovich.ru'\'' на другой домен"
-    echo "   с помощью команды:"
-    echo "   nano /etc/telemt.toml"
-    echo "   После редактирования файла перезапустите службу командой:"
-    echo "   sudo systemctl restart telemt"
-    echo
-    echo "2. Для проверки статуса службы выполните команду:"
-    echo "   systemctl status telemt"
-    echo
-    echo "3. Для получения ссылок на подключение выполните команду:"
-    echo "   journalctl -u telemt -n -g '\''links'\'' --no-pager -o cat | tac"
+if [ "$ACTION" != "help" ] && [ "$LANG_PROVIDED" -eq 0 ]; then
+    if [ -t 0 ] || [ -c /dev/tty ]; then
+        printf "\nSelect language / Выберите язык:\n"
+        printf "  1) English (default)\n"
+        printf "  2) Русский\n"
+        printf "Your choice / Ваш выбор [1/2]: "
+        read -r input_lang </dev/tty || input_lang=""
+        case "$input_lang" in
+            2) LANG_CHOICE="ru" ;;
+            *) LANG_CHOICE="en" ;;
+        esac
+    else
+        LANG_CHOICE="en"
+    fi
+    set_language "$LANG_CHOICE"
 fi
-'
+
+say() {
+    if [ "$#" -eq 0 ] || [ -z "${1:-}" ]; then
+        printf '\n'
+    else
+        printf '[INFO] %s\n' "$*"
+    fi
+}
+die() { printf '[ERROR] %s\n' "$*" >&2; exit 1; }
+
+write_root() { $SUDO sh -c 'cat > "$1"' _ "$1"; }
+
+cleanup() {
+    if [ -n "${TEMP_DIR:-}" ] && [ -d "$TEMP_DIR" ]; then
+        rm -rf -- "$TEMP_DIR"
+    fi
+}
+trap cleanup EXIT INT TERM
+
+show_help() {
+    if [ "$LANG_CHOICE" = "ru" ]; then
+        say "Использование: $0 [ <версия> | install | uninstall | purge ] [ опции ]"
+        say "  <версия>     Установить конкретную версию (например, 3.3.15, по умолчанию: latest)"
+        say "  install      Установить последнюю версию"
+        say "  uninstall    Удалить бинарный файл и службу"
+        say "  purge        Полностью удалить вместе с конфигурацией, данными и пользователем"
+        say ""
+        say "Опции:"
+        say "  -d, --domain Указать домен TLS (по умолчанию: petrovich.ru)"
+        say "  -p, --port   Указать порт сервера (по умолчанию: 443)"
+        say "  -s, --secret Указать секрет пользователя (32 hex символа)"
+        say "  -a, --ad-tag Указать ad_tag"
+        say "  -l, --lang   Выбрать язык вывода (1/en или 2/ru)"
+    else
+        say "Usage: $0 [ <version> | install | uninstall | purge ] [ options ]"
+        say "  <version>    Install specific version (e.g. 3.3.15, default: latest)"
+        say "  install      Install the latest version"
+        say "  uninstall    Remove the binary and service"
+        say "  purge        Remove everything including configuration, data, and user"
+        say ""
+        say "Options:"
+        say "  -d, --domain Set TLS domain (default: petrovich.ru)"
+        say "  -p, --port   Set server port (default: 443)"
+        say "  -s, --secret Set specific user secret (32 hex characters)"
+        say "  -a, --ad-tag Set ad_tag"
+        say "  -l, --lang   Set output language (1/en or 2/ru)"
+    fi
+    exit 0
+}
+
+check_os_entity() {
+    if command -v getent >/dev/null 2>&1; then getent "$1" "$2" >/dev/null 2>&1
+    else grep -q "^${2}:" "/etc/$1" 2>/dev/null; fi
+}
+
+normalize_path() {
+    printf '%s\n' "$1" | tr -s '/' | sed 's|/$||; s|^$|/|'
+}
+
+get_realpath() {
+    path_in="$1"
+    case "$path_in" in /*) ;; *) path_in="$(pwd)/$path_in" ;; esac
+
+    if command -v realpath >/dev/null 2>&1; then
+        if realpath_out="$(realpath -m "$path_in" 2>/dev/null)"; then
+            printf '%s\n' "$realpath_out"
+            return
+        fi
+    fi
+
+    if command -v readlink >/dev/null 2>&1; then
+        resolved_path="$(readlink -f "$path_in" 2>/dev/null || true)"
+        if [ -n "$resolved_path" ]; then
+            printf '%s\n' "$resolved_path"
+            return
+        fi
+    fi
+
+    d="${path_in%/*}"; b="${path_in##*/}"
+    if [ -z "$d" ]; then d="/"; fi
+    if [ "$d" = "$path_in" ]; then d="/"; b="$path_in"; fi
+
+    if [ -d "$d" ]; then
+        abs_d="$(cd "$d" >/dev/null 2>&1 && pwd || true)"
+        if [ -n "$abs_d" ]; then
+            if [ "$b" = "." ] || [ -z "$b" ]; then printf '%s\n' "$abs_d"
+            elif [ "$abs_d" = "/" ]; then printf '/%s\n' "$b"
+            else printf '%s/%s\n' "$abs_d" "$b"; fi
+        else
+            normalize_path "$path_in"
+        fi
+    else
+        normalize_path "$path_in"
+    fi
+}
+
+get_svc_mgr() {
+    if command -v systemctl >/dev/null 2>&1 && [ -d /run/systemd/system ]; then echo "systemd"
+    elif command -v rc-service >/dev/null 2>&1; then echo "openrc"
+    else echo "none"; fi
+}
+
+is_config_exists() {
+    if [ -n "$SUDO" ]; then
+        $SUDO sh -c '[ -f "$1" ]' _ "$CONFIG_FILE"
+    else
+        [ -f "$CONFIG_FILE" ]
+    fi
+}
+
+verify_common() {
+    [ -n "$BIN_NAME" ] || die "BIN_NAME $L_ERR_EMPTY_VAR"
+    [ -n "$INSTALL_DIR" ] || die "INSTALL_DIR $L_ERR_EMPTY_VAR"
+    [ -n "$CONFIG_DIR" ] || die "CONFIG_DIR $L_ERR_EMPTY_VAR"
+    [ -n "$CONFIG_FILE" ] || die "CONFIG_FILE $L_ERR_EMPTY_VAR"
+
+    case "$TARGET_VERSION" in *[!a-zA-Z0-9_.-]*) die "$L_ERR_INV_VER" ;; esac
+    case "$BIN_NAME" in *[!a-zA-Z0-9_-]*) die "$L_ERR_INV_BIN" ;; esac
+
+    INSTALL_DIR="$(get_realpath "$INSTALL_DIR")"
+    CONFIG_DIR="$(get_realpath "$CONFIG_DIR")"
+    WORK_DIR="$(get_realpath "$WORK_DIR")"
+    CONFIG_FILE="$(get_realpath "$CONFIG_FILE")"
+
+    CONFIG_PARENT_DIR="${CONFIG_FILE%/*}"
+    if [ -z "$CONFIG_PARENT_DIR" ]; then CONFIG_PARENT_DIR="/"; fi
+    if [ "$CONFIG_PARENT_DIR" = "$CONFIG_FILE" ]; then CONFIG_PARENT_DIR="."; fi
+
+    if [ "$(id -u)" -eq 0 ]; then
+        SUDO=""
+    else
+        command -v sudo >/dev/null 2>&1 || die "$L_ERR_ROOT"
+        SUDO="sudo"
+        if ! sudo -n true 2>/dev/null; then
+            if ! [ -t 0 ]; then
+                die "$L_ERR_SUDO_TTY"
+            fi
+        fi
+    fi
+
+    if [ -n "$SUDO" ]; then
+        if $SUDO sh -c '[ -d "$1" ]' _ "$CONFIG_FILE"; then
+            die "$L_ERR_DIR_CHECK"
+        fi
+    elif [ -d "$CONFIG_FILE" ]; then
+        die "$L_ERR_DIR_CHECK"
+    fi
+
+    for cmd in id uname awk grep find rm chown chmod mv mktemp mkdir tr dd sed ps head sleep cat tar gzip; do
+        command -v "$cmd" >/dev/null 2>&1 || die "$L_ERR_CMD_NOT_FOUND $cmd"
+    done
+}
+
+verify_install_deps() {
+    command -v curl >/dev/null 2>&1 || command -v wget >/dev/null 2>&1 || die "$L_ERR_NO_DL_TOOL"
+    command -v cp >/dev/null 2>&1 || command -v install >/dev/null 2>&1 || die "$L_ERR_NO_CP_TOOL"
+
+    if ! command -v setcap >/dev/null 2>&1; then
+        if command -v apk >/dev/null 2>&1; then
+            $SUDO apk add --no-cache libcap-utils libcap >/dev/null 2>&1 || true
+        elif command -v apt-get >/dev/null 2>&1; then
+            $SUDO env DEBIAN_FRONTEND=noninteractive apt-get install -y -q libcap2-bin >/dev/null 2>&1 || {
+                $SUDO env DEBIAN_FRONTEND=noninteractive apt-get update -q >/dev/null 2>&1 || true
+                $SUDO env DEBIAN_FRONTEND=noninteractive apt-get install -y -q libcap2-bin >/dev/null 2>&1 || true
+            }
+        elif command -v dnf >/dev/null 2>&1; then $SUDO dnf install -y -q libcap >/dev/null 2>&1 || true
+        elif command -v yum >/dev/null 2>&1; then $SUDO yum install -y -q libcap >/dev/null 2>&1 || true
+        fi
+    fi
+}
+
+check_port_availability() {
+    port_info=""
+
+    if command -v ss >/dev/null 2>&1; then
+        port_info=$($SUDO ss -tulnp 2>/dev/null | grep -E ":${SERVER_PORT}([[:space:]]|$)" || true)
+    elif command -v netstat >/dev/null 2>&1; then
+        port_info=$($SUDO netstat -tulnp 2>/dev/null | grep -E ":${SERVER_PORT}([[:space:]]|$)" || true)
+    elif command -v lsof >/dev/null 2>&1; then
+        port_info=$($SUDO lsof -i :${SERVER_PORT} 2>/dev/null | grep LISTEN || true)
+    else
+        say "[WARNING] $L_WARN_NO_NET_TOOL"
+        return 0
+    fi
+
+    if [ -n "$port_info" ]; then
+        if printf '%s\n' "$port_info" | grep -q "${BIN_NAME}"; then
+            say "  -> $L_INFO_PORT_IGNORE"
+        else
+            say "[ERROR] $L_ERR_PORT_IN_USE $SERVER_PORT:"
+            printf '  %s\n' "$port_info"
+            die "$L_ERR_PORT_FREE"
+        fi
+    fi
+}
+
+detect_arch() {
+    sys_arch="$(uname -m)"
+    case "$sys_arch" in
+        x86_64|amd64)
+            if [ -r /proc/cpuinfo ] && grep -q "avx2" /proc/cpuinfo 2>/dev/null && grep -q "bmi2" /proc/cpuinfo 2>/dev/null; then
+                echo "x86_64-v3"
+            else
+                echo "x86_64"
+            fi
+            ;;
+        aarch64|arm64) echo "aarch64" ;;
+        *) die "$L_ERR_UNSUP_ARCH $sys_arch" ;;
+    esac
+}
+
+detect_libc() {
+    for f in /lib/ld-musl-*.so.* /lib64/ld-musl-*.so.*; do
+        if [ -e "$f" ]; then echo "musl"; return 0; fi
+    done
+    if grep -qE '^ID="?alpine"?' /etc/os-release 2>/dev/null; then echo "musl"; return 0; fi
+    if command -v ldd >/dev/null 2>&1 && (ldd --version 2>&1 || true) | grep -qi musl; then echo "musl"; return 0; fi
+    echo "gnu"
+}
+
+fetch_file() {
+    if command -v curl >/dev/null 2>&1; then curl -fsSL "$1" -o "$2"
+    else wget -q -O "$2" "$1"; fi
+}
+
+ensure_user_group() {
+    nologin_bin="$(command -v nologin 2>/dev/null || command -v false 2>/dev/null || echo /bin/false)"
+
+    if ! check_os_entity group telemt; then
+        if command -v groupadd >/dev/null 2>&1; then $SUDO groupadd -r telemt
+        elif command -v addgroup >/dev/null 2>&1; then $SUDO addgroup -S telemt
+        else die "$L_ERR_CREATE_GRP" ; fi
+    fi
+
+    if ! check_os_entity passwd telemt; then
+        if command -v useradd >/dev/null 2>&1; then
+            $SUDO useradd -r -g telemt -d "$WORK_DIR" -s "$nologin_bin" -c "Telemt Proxy" telemt
+        elif command -v adduser >/dev/null 2>&1; then
+            if adduser --help 2>&1 | grep -q -- '-S'; then
+                $SUDO adduser -S -D -H -h "$WORK_DIR" -s "$nologin_bin" -G telemt telemt
+            else
+                $SUDO adduser --system --home "$WORK_DIR" --shell "$nologin_bin" --no-create-home --ingroup telemt --disabled-password telemt
+            fi
+        else die "$L_ERR_CREATE_USR"; fi
+    fi
+}
+
+setup_dirs() {
+    $SUDO mkdir -p "$WORK_DIR" "$CONFIG_DIR" "$CONFIG_PARENT_DIR" || die "$L_ERR_MKDIR"
+
+    $SUDO chown telemt:telemt "$WORK_DIR" && $SUDO chmod 750 "$WORK_DIR"
+    $SUDO chown telemt:telemt "$CONFIG_DIR" && $SUDO chmod 750 "$CONFIG_DIR"
+
+    if [ "$CONFIG_PARENT_DIR" != "$CONFIG_DIR" ] && [ "$CONFIG_PARENT_DIR" != "." ] && [ "$CONFIG_PARENT_DIR" != "/" ]; then
+        $SUDO chown root:telemt "$CONFIG_PARENT_DIR" && $SUDO chmod 750 "$CONFIG_PARENT_DIR"
+    fi
+}
+
+stop_service() {
+    svc="$(get_svc_mgr)"
+    if [ "$svc" = "systemd" ] && systemctl is-active --quiet "$SERVICE_NAME" 2>/dev/null; then
+        $SUDO systemctl stop "$SERVICE_NAME" 2>/dev/null || true
+    elif [ "$svc" = "openrc" ] && rc-service "$SERVICE_NAME" status >/dev/null 2>&1; then
+        $SUDO rc-service "$SERVICE_NAME" stop 2>/dev/null || true
+    fi
+}
+
+install_binary() {
+    bin_src="$1"; bin_dst="$2"
+    if [ -e "$INSTALL_DIR" ] && [ ! -d "$INSTALL_DIR" ]; then
+        die "'$INSTALL_DIR' $L_ERR_INSTALL_DIR"
+    fi
+
+    $SUDO mkdir -p "$INSTALL_DIR" || die "$L_ERR_MKDIR"
+    
+    $SUDO rm -f "$bin_dst" 2>/dev/null || true
+
+    if command -v install >/dev/null 2>&1; then
+        $SUDO install -m 0755 "$bin_src" "$bin_dst" || die "$L_ERR_BIN_INSTALL"
+    else
+        $SUDO cp "$bin_src" "$bin_dst" && $SUDO chmod 0755 "$bin_dst" || die "$L_ERR_BIN_COPY"
+    fi
+
+    $SUDO sh -c '[ -x "$1" ]' _ "$bin_dst" || die "$L_ERR_BIN_EXEC $bin_dst"
+
+    if command -v setcap >/dev/null 2>&1; then
+        $SUDO setcap cap_net_bind_service,cap_net_admin=+ep "$bin_dst" 2>/dev/null || true
+    fi
+}
+
+generate_secret() {
+    secret="$(command -v openssl >/dev/null 2>&1 && openssl rand -hex 16 2>/dev/null || true)"
+    if [ -z "$secret" ] || [ "${#secret}" -ne 32 ]; then
+        if command -v od >/dev/null 2>&1; then secret="$(dd if=/dev/urandom bs=16 count=1 2>/dev/null | od -An -tx1 | tr -d ' \n')"
+        elif command -v hexdump >/dev/null 2>&1; then secret="$(dd if=/dev/urandom bs=16 count=1 2>/dev/null | hexdump -e '1/1 "%02x"')"
+        elif command -v xxd >/dev/null 2>&1; then secret="$(dd if=/dev/urandom bs=16 count=1 2>/dev/null | xxd -p | tr -d '\n')"
+        fi
+    fi
+    if [ "${#secret}" -eq 32 ]; then echo "$secret"; else return 1; fi
+}
+
+generate_config_content() {
+    conf_secret="$1"
+    conf_tag="$2"
+    escaped_tls_domain="$(printf '%s\n' "$TLS_DOMAIN" | tr -d '[:cntrl:]' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+
+    cat <<EOF
+[general]
+use_middle_proxy = true
+EOF
+
+    if [ -n "$conf_tag" ]; then
+        echo "ad_tag = \"${conf_tag}\""
+    fi
+
+    cat <<EOF
+
+[general.modes]
+classic = false
+secure = false
+tls = true
+
+[server]
+port = ${SERVER_PORT}
+
+[server.api]
+enabled = true
+listen = "127.0.0.1:9091"
+whitelist = ["127.0.0.1/32"]
+
+[censorship]
+tls_domain = "${escaped_tls_domain}"
+
+[access.users]
+hello = "${conf_secret}"
+EOF
+}
+
+install_config() {
+    if is_config_exists; then
+        say "  -> $L_INFO_CONF_EXISTS"
+
+        tmp_conf="${TEMP_DIR}/config.tmp"
+        $SUDO cat "$CONFIG_FILE" > "$tmp_conf"
+        
+        escaped_domain="$(printf '%s\n' "$TLS_DOMAIN" | tr -d '[:cntrl:]' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+
+        awk -v port="$SERVER_PORT" -v secret="$USER_SECRET" -v domain="$escaped_domain" -v ad_tag="$AD_TAG" \
+            -v flag_p="$PORT_PROVIDED" -v flag_s="$SECRET_PROVIDED" -v flag_d="$DOMAIN_PROVIDED" -v flag_a="$AD_TAG_PROVIDED" '
+        BEGIN { ad_tag_handled = 0 }
+        
+        flag_p == "1" && /^[ \t]*port[ \t]*=/ { print "port = " port; next }
+        flag_s == "1" && /^[ \t]*hello[ \t]*=/ { print "hello = \"" secret "\""; next }
+        flag_d == "1" && /^[ \t]*tls_domain[ \t]*=/ { print "tls_domain = \"" domain "\""; next }
+        
+        flag_a == "1" && /^[ \t]*ad_tag[ \t]*=/ { 
+            if (!ad_tag_handled) { 
+                print "ad_tag = \"" ad_tag "\""; 
+                ad_tag_handled = 1; 
+            } 
+            next 
+        }
+        flag_a == "1" && /^\[general\]/ { 
+            print; 
+            if (!ad_tag_handled) { 
+                print "ad_tag = \"" ad_tag "\""; 
+                ad_tag_handled = 1; 
+            } 
+            next 
+        }
+        
+        { print }
+        ' "$tmp_conf" > "${tmp_conf}.new" && mv "${tmp_conf}.new" "$tmp_conf"
+
+        [ "$PORT_PROVIDED" -eq 1 ] && say "  -> $L_INFO_UPD_PORT $SERVER_PORT"
+        [ "$SECRET_PROVIDED" -eq 1 ] && say "  -> $L_INFO_UPD_SEC"
+        [ "$DOMAIN_PROVIDED" -eq 1 ] && say "  -> $L_INFO_UPD_DOM $TLS_DOMAIN"
+        [ "$AD_TAG_PROVIDED" -eq 1 ] && say "  -> $L_INFO_UPD_TAG"
+
+        write_root "$CONFIG_FILE" < "$tmp_conf"
+        rm -f "$tmp_conf"
+        return 0
+    fi
+
+    if [ -z "$USER_SECRET" ]; then
+        USER_SECRET="$(generate_secret)" || die "$L_ERR_GEN_SEC"
+    fi
+
+    generate_config_content "$USER_SECRET" "$AD_TAG" | write_root "$CONFIG_FILE" || die "$L_ERR_CONF_INST"
+    $SUDO chown root:telemt "$CONFIG_FILE" && $SUDO chmod 640 "$CONFIG_FILE"
+
+    say "  -> $L_INFO_CONF_OK"
+    say "  -> $L_INFO_CONF_SEC $USER_SECRET"
+}
+
+generate_systemd_content() {
+    cat <<EOF
+[Unit]
+Description=Telemt
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Type=simple
+User=telemt
+Group=telemt
+WorkingDirectory=$WORK_DIR
+ExecStart="${INSTALL_DIR}/${BIN_NAME}" "${CONFIG_FILE}"
+Restart=on-failure
+RestartSec=5
+LimitNOFILE=65536
+AmbientCapabilities=CAP_NET_BIND_SERVICE CAP_NET_ADMIN
+CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_ADMIN
+
+[Install]
+WantedBy=multi-user.target
+EOF
+}
+
+generate_openrc_content() {
+    cat <<EOF
+#!/sbin/openrc-run
+name="$SERVICE_NAME"
+description="Telemt Proxy Service"
+command="${INSTALL_DIR}/${BIN_NAME}"
+command_args="${CONFIG_FILE}"
+command_background=true
+command_user="telemt:telemt"
+pidfile="/run/\${RC_SVCNAME}.pid"
+directory="${WORK_DIR}"
+rc_ulimit="-n 65536"
+depend() { need net; use logger; }
+EOF
+}
+
+install_service() {
+    svc="$(get_svc_mgr)"
+    if [ "$svc" = "systemd" ]; then
+        generate_systemd_content | write_root "/etc/systemd/system/${SERVICE_NAME}.service"
+        $SUDO chown root:root "/etc/systemd/system/${SERVICE_NAME}.service" && $SUDO chmod 644 "/etc/systemd/system/${SERVICE_NAME}.service"
+
+        $SUDO systemctl daemon-reload || true
+        $SUDO systemctl enable "$SERVICE_NAME" || true
+
+        if ! $SUDO systemctl start "$SERVICE_NAME"; then
+            say "[WARNING] $L_WARN_SVC_FAIL"
+            SERVICE_START_FAILED=1
+        fi
+    elif [ "$svc" = "openrc" ]; then
+        generate_openrc_content | write_root "/etc/init.d/${SERVICE_NAME}"
+        $SUDO chown root:root "/etc/init.d/${SERVICE_NAME}" && $SUDO chmod 0755 "/etc/init.d/${SERVICE_NAME}"
+
+        $SUDO rc-update add "$SERVICE_NAME" default 2>/dev/null || true
+
+        if ! $SUDO rc-service "$SERVICE_NAME" start 2>/dev/null; then
+            say "[WARNING] $L_WARN_SVC_FAIL"
+            SERVICE_START_FAILED=1
+        fi
+    else
+        cmd="\"${INSTALL_DIR}/${BIN_NAME}\" \"${CONFIG_FILE}\""
+        if [ -n "$SUDO" ]; then
+            say "  -> $L_INFO_MANUAL_START sudo -u telemt $cmd"
+        else
+            say "  -> $L_INFO_MANUAL_START su -s /bin/sh telemt -c '$cmd'"
+        fi
+    fi
+}
+
+kill_user_procs() {
+    if command -v pkill >/dev/null 2>&1; then
+        $SUDO pkill -u telemt "$BIN_NAME" 2>/dev/null || true
+        sleep 1
+        $SUDO pkill -9 -u telemt "$BIN_NAME" 2>/dev/null || true
+    else
+        if command -v pgrep >/dev/null 2>&1; then
+            pids="$(pgrep -u telemt 2>/dev/null || true)"
+        else
+            pids="$(ps -ef 2>/dev/null | awk '$1=="telemt"{print $2}' || true)"
+            [ -z "$pids" ] && pids="$(ps 2>/dev/null | awk '$2=="telemt"{print $1}' || true)"
+        fi
+
+        if [ -n "$pids" ]; then
+            for pid in $pids; do
+                case "$pid" in ''|*[!0-9]*) continue ;; *) $SUDO kill "$pid" 2>/dev/null || true ;; esac
+            done
+            sleep 1
+            for pid in $pids; do
+                case "$pid" in ''|*[!0-9]*) continue ;; *) $SUDO kill -9 "$pid" 2>/dev/null || true ;; esac
+            done
+        fi
+    fi
+}
+
+uninstall() {
+    say "$L_INFO_UNINST_START $BIN_NAME..."
+
+    say "$L_U_STAGE_1"
+    stop_service
+
+    say "$L_U_STAGE_2"
+    svc="$(get_svc_mgr)"
+    if [ "$svc" = "systemd" ]; then
+        $SUDO systemctl disable "$SERVICE_NAME" 2>/dev/null || true
+        $SUDO rm -f "/etc/systemd/system/${SERVICE_NAME}.service"
+        $SUDO systemctl daemon-reload 2>/dev/null || true
+    elif [ "$svc" = "openrc" ]; then
+        $SUDO rc-update del "$SERVICE_NAME" 2>/dev/null || true
+        $SUDO rm -f "/etc/init.d/${SERVICE_NAME}"
+    fi
+
+    say "$L_U_STAGE_3"
+    kill_user_procs
+
+    say "$L_U_STAGE_4"
+    $SUDO rm -f "${INSTALL_DIR}/${BIN_NAME}"
+
+    if [ "$ACTION" = "purge" ]; then
+        say "$L_U_STAGE_5"
+        $SUDO rm -rf "$CONFIG_DIR" "$WORK_DIR"
+        $SUDO rm -f "$CONFIG_FILE"
+        
+        if check_os_entity passwd telemt; then
+            $SUDO userdel telemt 2>/dev/null || $SUDO deluser telemt 2>/dev/null || true
+        fi
+        
+        if check_os_entity group telemt; then
+            $SUDO groupdel telemt 2>/dev/null || $SUDO delgroup telemt 2>/dev/null || true
+        fi
+    else
+        say "$L_INFO_KEEP_CONF"
+    fi
+
+    printf '\n====================================================================\n'
+    printf '                    %s\n' "$L_OUT_UNINST_H"
+    printf '====================================================================\n\n'
+    exit 0
+}
+
+case "$ACTION" in
+    help) show_help ;;
+    uninstall|purge) verify_common; uninstall ;;
+    install)
+        say "$L_INFO_I_START $BIN_NAME (Version: $TARGET_VERSION)"
+
+        say "$L_I_STAGE_1"
+        verify_common
+        verify_install_deps
+
+        if is_config_exists; then
+            ext_port="$($SUDO awk -F'=' '/^[ \t]*port[ \t]*=/ {gsub(/[^0-9]/, "", $2); print $2; exit}' "$CONFIG_FILE" 2>/dev/null || true)"
+            if [ -n "$ext_port" ] && [ "$PORT_PROVIDED" -eq 0 ]; then
+                SERVER_PORT="$ext_port"
+            fi
+
+            ext_secret="$($SUDO awk -F'"' '/^[ \t]*hello[ \t]*=/ {print $2; exit}' "$CONFIG_FILE" 2>/dev/null || true)"
+            if [ -n "$ext_secret" ] && [ "$SECRET_PROVIDED" -eq 0 ]; then
+                USER_SECRET="$ext_secret"
+            fi
+
+            ext_domain="$($SUDO awk -F'"' '/^[ \t]*tls_domain[ \t]*=/ {print $2; exit}' "$CONFIG_FILE" 2>/dev/null || true)"
+            if [ -n "$ext_domain" ] && [ "$DOMAIN_PROVIDED" -eq 0 ]; then
+                TLS_DOMAIN="$ext_domain"
+            fi
+        fi
+
+        check_port_availability
+
+        if [ "$DOMAIN_PROVIDED" -eq 0 ]; then
+            say "$L_I_STAGE_1_5"
+            if [ -t 0 ] || [ -c /dev/tty ]; then
+                printf "$L_I_PROMPT_DOM" "$TLS_DOMAIN"
+                read -r input_domain </dev/tty || input_domain=""
+                if [ -n "$input_domain" ]; then
+                    TLS_DOMAIN="$input_domain"
+                fi
+            else
+                say "[WARNING] $L_WARN_NO_TTY $TLS_DOMAIN"
+            fi
+            DOMAIN_PROVIDED=1
+        fi
+
+        if [ "$TARGET_VERSION" != "latest" ]; then
+            TARGET_VERSION="${TARGET_VERSION#v}"
+        fi
+
+        ARCH="$(detect_arch)"; LIBC="$(detect_libc)"
+        FILE_NAME="${BIN_NAME}-${ARCH}-linux-${LIBC}.tar.gz"
+
+        if [ "$TARGET_VERSION" = "latest" ]; then
+            DL_URL="https://github.com/${REPO}/releases/latest/download/${FILE_NAME}"
+        else
+            DL_URL="https://github.com/${REPO}/releases/download/${TARGET_VERSION}/${FILE_NAME}"
+        fi
+
+        say "$L_I_STAGE_2"
+        TEMP_DIR="$(mktemp -d)" || die "$L_ERR_TMP_DIR"
+        if [ -z "$TEMP_DIR" ] || [ ! -d "$TEMP_DIR" ]; then
+            die "$L_ERR_TMP_INV"
+        fi
+
+        if ! fetch_file "$DL_URL" "${TEMP_DIR}/${FILE_NAME}"; then
+            if [ "$ARCH" = "x86_64-v3" ]; then
+                say "  -> $L_INFO_FALLBACK"
+                ARCH="x86_64"
+                FILE_NAME="${BIN_NAME}-${ARCH}-linux-${LIBC}.tar.gz"
+                if [ "$TARGET_VERSION" = "latest" ]; then
+                    DL_URL="https://github.com/${REPO}/releases/latest/download/${FILE_NAME}"
+                else
+                    DL_URL="https://github.com/${REPO}/releases/download/${TARGET_VERSION}/${FILE_NAME}"
+                fi
+                fetch_file "$DL_URL" "${TEMP_DIR}/${FILE_NAME}" || die "$L_ERR_DL_FAIL"
+            else
+                die "$L_ERR_DL_FAIL"
+            fi
+        fi
+
+        say "$L_I_STAGE_3"
+        if ! gzip -dc "${TEMP_DIR}/${FILE_NAME}" | tar -xf - -C "$TEMP_DIR" 2>/dev/null; then
+            die "$L_ERR_EXTRACT"
+        fi
+
+        EXTRACTED_BIN="$(find "$TEMP_DIR" -type f -name "$BIN_NAME" -print 2>/dev/null | head -n 1 || true)"
+        [ -n "$EXTRACTED_BIN" ] || die "$L_ERR_BIN_NOT_FOUND"
+
+        say "$L_I_STAGE_4"
+        ensure_user_group; setup_dirs; stop_service
+
+        say "$L_I_STAGE_5"
+        install_binary "$EXTRACTED_BIN" "${INSTALL_DIR}/${BIN_NAME}"
+
+        say "$L_I_STAGE_6"
+        install_config
+
+        say "$L_I_STAGE_7"
+        install_service
+
+        if [ "${SERVICE_START_FAILED:-0}" -eq 1 ]; then
+            printf '\n====================================================================\n'
+            printf '               %s\n' "$L_OUT_WARN_H"
+            printf '====================================================================\n\n'
+            printf '%b' "$L_OUT_WARN_D"
+        else
+            printf '\n====================================================================\n'
+            printf '                      %s\n' "$L_OUT_SUCC_H"
+            printf '====================================================================\n\n'
+        fi
+
+        SERVER_IP=""
+        if command -v curl >/dev/null 2>&1; then SERVER_IP="$(curl -s4 -m 3 ifconfig.me 2>/dev/null || curl -s4 -m 3 api.ipify.org 2>/dev/null || true)"
+        elif command -v wget >/dev/null 2>&1; then SERVER_IP="$(wget -qO- -T 3 ifconfig.me 2>/dev/null || wget -qO- -T 3 api.ipify.org 2>/dev/null || true)"; fi
+        [ -z "$SERVER_IP" ] && SERVER_IP="<YOUR_SERVER_IP>"
+        
+        if command -v xxd >/dev/null 2>&1; then HEX_DOMAIN="$(printf '%s' "$TLS_DOMAIN" | xxd -p | tr -d '\n')"
+        elif command -v hexdump >/dev/null 2>&1; then HEX_DOMAIN="$(printf '%s' "$TLS_DOMAIN" | hexdump -v -e '/1 "%02x"')"
+        elif command -v od >/dev/null 2>&1; then HEX_DOMAIN="$(printf '%s' "$TLS_DOMAIN" | od -A n -t x1 | tr -d ' \n')"
+        else HEX_DOMAIN=""; fi
+
+        CLIENT_SECRET="ee${USER_SECRET}${HEX_DOMAIN}"
+
+        printf '%b\n' "$L_OUT_LINK"
+        printf '  tg://proxy?server=%s&port=%s&secret=%s\n\n' "$SERVER_IP" "$SERVER_PORT" "$CLIENT_SECRET"
+
+        printf '====================================================================\n'
+        ;;
+esac

src/api/config_store.rs

@@ -1,13 +1,39 @@
+use std::collections::BTreeMap;
 use std::io::Write;
 use std::path::{Path, PathBuf};
 
+use chrono::{DateTime, Utc};
 use hyper::header::IF_MATCH;
+use serde::Serialize;
 use sha2::{Digest, Sha256};
 
 use crate::config::ProxyConfig;
 
 use super::model::ApiFailure;
 
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub(super) enum AccessSection {
+    Users,
+    UserAdTags,
+    UserMaxTcpConns,
+    UserExpirations,
+    UserDataQuota,
+    UserMaxUniqueIps,
+}
+
+impl AccessSection {
+    fn table_name(self) -> &'static str {
+        match self {
+            Self::Users => "access.users",
+            Self::UserAdTags => "access.user_ad_tags",
+            Self::UserMaxTcpConns => "access.user_max_tcp_conns",
+            Self::UserExpirations => "access.user_expirations",
+            Self::UserDataQuota => "access.user_data_quota",
+            Self::UserMaxUniqueIps => "access.user_max_unique_ips",
+        }
+    }
+}
+
 pub(super) fn parse_if_match(headers: &hyper::HeaderMap) -> Option<String> {
     headers
         .get(IF_MATCH)
@@ -66,6 +92,142 @@ pub(super) async fn save_config_to_disk(
     Ok(compute_revision(&serialized))
 }
 
+pub(super) async fn save_access_sections_to_disk(
+    config_path: &Path,
+    cfg: &ProxyConfig,
+    sections: &[AccessSection],
+) -> Result<String, ApiFailure> {
+    let mut content = tokio::fs::read_to_string(config_path)
+        .await
+        .map_err(|e| ApiFailure::internal(format!("failed to read config: {}", e)))?;
+
+    let mut applied = Vec::new();
+    for section in sections {
+        if applied.contains(section) {
+            continue;
+        }
+        let rendered = render_access_section(cfg, *section)?;
+        content = upsert_toml_table(&content, section.table_name(), &rendered);
+        applied.push(*section);
+    }
+
+    write_atomic(config_path.to_path_buf(), content.clone()).await?;
+    Ok(compute_revision(&content))
+}
+
+fn render_access_section(cfg: &ProxyConfig, section: AccessSection) -> Result<String, ApiFailure> {
+    let body = match section {
+        AccessSection::Users => {
+            let rows: BTreeMap<String, String> = cfg
+                .access
+                .users
+                .iter()
+                .map(|(key, value)| (key.clone(), value.clone()))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+        AccessSection::UserAdTags => {
+            let rows: BTreeMap<String, String> = cfg
+                .access
+                .user_ad_tags
+                .iter()
+                .map(|(key, value)| (key.clone(), value.clone()))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+        AccessSection::UserMaxTcpConns => {
+            let rows: BTreeMap<String, usize> = cfg
+                .access
+                .user_max_tcp_conns
+                .iter()
+                .map(|(key, value)| (key.clone(), *value))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+        AccessSection::UserExpirations => {
+            let rows: BTreeMap<String, DateTime<Utc>> = cfg
+                .access
+                .user_expirations
+                .iter()
+                .map(|(key, value)| (key.clone(), *value))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+        AccessSection::UserDataQuota => {
+            let rows: BTreeMap<String, u64> = cfg
+                .access
+                .user_data_quota
+                .iter()
+                .map(|(key, value)| (key.clone(), *value))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+        AccessSection::UserMaxUniqueIps => {
+            let rows: BTreeMap<String, usize> = cfg
+                .access
+                .user_max_unique_ips
+                .iter()
+                .map(|(key, value)| (key.clone(), *value))
+                .collect();
+            serialize_table_body(&rows)?
+        }
+    };
+
+    let mut out = format!("[{}]\n", section.table_name());
+    if !body.is_empty() {
+        out.push_str(&body);
+    }
+    if !out.ends_with('\n') {
+        out.push('\n');
+    }
+    Ok(out)
+}
+
+fn serialize_table_body<T: Serialize>(value: &T) -> Result<String, ApiFailure> {
+    toml::to_string(value)
+        .map_err(|e| ApiFailure::internal(format!("failed to serialize access section: {}", e)))
+}
+
+fn upsert_toml_table(source: &str, table_name: &str, replacement: &str) -> String {
+    if let Some((start, end)) = find_toml_table_bounds(source, table_name) {
+        let mut out = String::with_capacity(source.len() + replacement.len());
+        out.push_str(&source[..start]);
+        out.push_str(replacement);
+        out.push_str(&source[end..]);
+        return out;
+    }
+
+    let mut out = source.to_string();
+    if !out.is_empty() && !out.ends_with('\n') {
+        out.push('\n');
+    }
+    if !out.is_empty() {
+        out.push('\n');
+    }
+    out.push_str(replacement);
+    out
+}
+
+fn find_toml_table_bounds(source: &str, table_name: &str) -> Option<(usize, usize)> {
+    let target = format!("[{}]", table_name);
+    let mut offset = 0usize;
+    let mut start = None;
+
+    for line in source.split_inclusive('\n') {
+        let trimmed = line.trim();
+        if let Some(start_offset) = start {
+            if trimmed.starts_with('[') {
+                return Some((start_offset, offset));
+            }
+        } else if trimmed == target {
+            start = Some(offset);
+        }
+        offset = offset.saturating_add(line.len());
+    }
+
+    start.map(|start_offset| (start_offset, source.len()))
+}
+
 async fn write_atomic(path: PathBuf, contents: String) -> Result<(), ApiFailure> {
     tokio::task::spawn_blocking(move || write_atomic_sync(&path, &contents))
         .await

src/api/events.rs

@@ -0,0 +1,90 @@
+use std::collections::VecDeque;
+use std::sync::Mutex;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+use serde::Serialize;
+
+#[derive(Clone, Serialize)]
+pub(super) struct ApiEventRecord {
+    pub(super) seq: u64,
+    pub(super) ts_epoch_secs: u64,
+    pub(super) event_type: String,
+    pub(super) context: String,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct ApiEventSnapshot {
+    pub(super) capacity: usize,
+    pub(super) dropped_total: u64,
+    pub(super) events: Vec<ApiEventRecord>,
+}
+
+struct ApiEventsInner {
+    capacity: usize,
+    dropped_total: u64,
+    next_seq: u64,
+    events: VecDeque<ApiEventRecord>,
+}
+
+/// Bounded ring-buffer for control-plane API/runtime events.
+pub(crate) struct ApiEventStore {
+    inner: Mutex<ApiEventsInner>,
+}
+
+impl ApiEventStore {
+    pub(super) fn new(capacity: usize) -> Self {
+        let bounded = capacity.max(16);
+        Self {
+            inner: Mutex::new(ApiEventsInner {
+                capacity: bounded,
+                dropped_total: 0,
+                next_seq: 1,
+                events: VecDeque::with_capacity(bounded),
+            }),
+        }
+    }
+
+    pub(super) fn record(&self, event_type: &str, context: impl Into<String>) {
+        let now_epoch_secs = SystemTime::now()
+            .duration_since(UNIX_EPOCH)
+            .unwrap_or_default()
+            .as_secs();
+        let mut context = context.into();
+        if context.len() > 256 {
+            context.truncate(256);
+        }
+
+        let mut guard = self.inner.lock().expect("api event store mutex poisoned");
+        if guard.events.len() == guard.capacity {
+            guard.events.pop_front();
+            guard.dropped_total = guard.dropped_total.saturating_add(1);
+        }
+        let seq = guard.next_seq;
+        guard.next_seq = guard.next_seq.saturating_add(1);
+        guard.events.push_back(ApiEventRecord {
+            seq,
+            ts_epoch_secs: now_epoch_secs,
+            event_type: event_type.to_string(),
+            context,
+        });
+    }
+
+    pub(super) fn snapshot(&self, limit: usize) -> ApiEventSnapshot {
+        let guard = self.inner.lock().expect("api event store mutex poisoned");
+        let bounded_limit = limit.clamp(1, guard.capacity.max(1));
+        let mut items: Vec<ApiEventRecord> = guard
+            .events
+            .iter()
+            .rev()
+            .take(bounded_limit)
+            .cloned()
+            .collect();
+        items.reverse();
+
+        ApiEventSnapshot {
+            capacity: guard.capacity,
+            dropped_total: guard.dropped_total,
+            events: items,
+        }
+    }
+}

src/api/http_utils.rs

@@ -0,0 +1,88 @@
+use http_body_util::{BodyExt, Full};
+use hyper::StatusCode;
+use hyper::body::{Bytes, Incoming};
+use serde::Serialize;
+use serde::de::DeserializeOwned;
+
+use super::model::{ApiFailure, ErrorBody, ErrorResponse, SuccessResponse};
+
+pub(super) fn success_response<T: Serialize>(
+    status: StatusCode,
+    data: T,
+    revision: String,
+) -> hyper::Response<Full<Bytes>> {
+    let payload = SuccessResponse {
+        ok: true,
+        data,
+        revision,
+    };
+    let body = serde_json::to_vec(&payload).unwrap_or_else(|_| b"{\"ok\":false}".to_vec());
+    hyper::Response::builder()
+        .status(status)
+        .header("content-type", "application/json; charset=utf-8")
+        .body(Full::new(Bytes::from(body)))
+        .unwrap()
+}
+
+pub(super) fn error_response(request_id: u64, failure: ApiFailure) -> hyper::Response<Full<Bytes>> {
+    let payload = ErrorResponse {
+        ok: false,
+        error: ErrorBody {
+            code: failure.code,
+            message: failure.message,
+        },
+        request_id,
+    };
+    let body = serde_json::to_vec(&payload).unwrap_or_else(|_| {
+        format!(
+            "{{\"ok\":false,\"error\":{{\"code\":\"internal_error\",\"message\":\"serialization failed\"}},\"request_id\":{}}}",
+            request_id
+        )
+        .into_bytes()
+    });
+    hyper::Response::builder()
+        .status(failure.status)
+        .header("content-type", "application/json; charset=utf-8")
+        .body(Full::new(Bytes::from(body)))
+        .unwrap()
+}
+
+pub(super) async fn read_json<T: DeserializeOwned>(
+    body: Incoming,
+    limit: usize,
+) -> Result<T, ApiFailure> {
+    let bytes = read_body_with_limit(body, limit).await?;
+    serde_json::from_slice(&bytes).map_err(|_| ApiFailure::bad_request("Invalid JSON body"))
+}
+
+pub(super) async fn read_optional_json<T: DeserializeOwned>(
+    body: Incoming,
+    limit: usize,
+) -> Result<Option<T>, ApiFailure> {
+    let bytes = read_body_with_limit(body, limit).await?;
+    if bytes.is_empty() {
+        return Ok(None);
+    }
+    serde_json::from_slice(&bytes)
+        .map(Some)
+        .map_err(|_| ApiFailure::bad_request("Invalid JSON body"))
+}
+
+async fn read_body_with_limit(body: Incoming, limit: usize) -> Result<Vec<u8>, ApiFailure> {
+    let mut collected = Vec::new();
+    let mut body = body;
+    while let Some(frame_result) = body.frame().await {
+        let frame = frame_result.map_err(|_| ApiFailure::bad_request("Invalid request body"))?;
+        if let Some(chunk) = frame.data_ref() {
+            if collected.len().saturating_add(chunk.len()) > limit {
+                return Err(ApiFailure::new(
+                    StatusCode::PAYLOAD_TOO_LARGE,
+                    "payload_too_large",
+                    format!("Body exceeds {} bytes", limit),
+                ));
+            }
+            collected.extend_from_slice(chunk);
+        }
+    }
+    Ok(collected)
+}

src/api/mod.rs

@@ -1,73 +1,119 @@
+#![allow(clippy::too_many_arguments)]
+
 use std::convert::Infallible;
 use std::net::{IpAddr, SocketAddr};
 use std::path::PathBuf;
 use std::sync::Arc;
-use std::sync::atomic::{AtomicU64, Ordering};
+use std::sync::atomic::{AtomicBool, AtomicU64, Ordering};
 
-use http_body_util::{BodyExt, Full};
+use http_body_util::Full;
 use hyper::body::{Bytes, Incoming};
 use hyper::header::AUTHORIZATION;
 use hyper::server::conn::http1;
 use hyper::service::service_fn;
 use hyper::{Method, Request, Response, StatusCode};
-use serde::Serialize;
-use serde::de::DeserializeOwned;
 use tokio::net::TcpListener;
-use tokio::sync::{Mutex, watch};
+use tokio::sync::{Mutex, RwLock, watch};
 use tracing::{debug, info, warn};
 
 use crate::config::ProxyConfig;
 use crate::ip_tracker::UserIpTracker;
+use crate::proxy::route_mode::RouteRuntimeController;
+use crate::startup::StartupTracker;
 use crate::stats::Stats;
-use crate::transport::middle_proxy::MePool;
 use crate::transport::UpstreamManager;
+use crate::transport::middle_proxy::MePool;
 
 mod config_store;
+mod events;
+mod http_utils;
 mod model;
+mod runtime_edge;
+mod runtime_init;
+mod runtime_min;
+mod runtime_selftest;
 mod runtime_stats;
+mod runtime_watch;
+mod runtime_zero;
 mod users;
 
-use config_store::{current_revision, parse_if_match};
+use config_store::{current_revision, load_config_from_disk, parse_if_match};
+use events::ApiEventStore;
+use http_utils::{error_response, read_json, read_optional_json, success_response};
 use model::{
-    ApiFailure, CreateUserRequest, ErrorBody, ErrorResponse, HealthData, PatchUserRequest,
-    RotateSecretRequest, SuccessResponse, SummaryData,
+    ApiFailure, CreateUserRequest, DeleteUserResponse, HealthData, PatchUserRequest,
+    RotateSecretRequest, SummaryData, UserActiveIps,
 };
+use runtime_edge::{
+    EdgeConnectionsCacheEntry, build_runtime_connections_summary_data,
+    build_runtime_events_recent_data,
+};
+use runtime_init::build_runtime_initialization_data;
+use runtime_min::{
+    build_runtime_me_pool_state_data, build_runtime_me_quality_data, build_runtime_nat_stun_data,
+    build_runtime_upstream_quality_data, build_security_whitelist_data,
+};
+use runtime_selftest::build_runtime_me_selftest_data;
 use runtime_stats::{
     MinimalCacheEntry, build_dcs_data, build_me_writers_data, build_minimal_all_data,
     build_upstreams_data, build_zero_all_data,
 };
+use runtime_watch::spawn_runtime_watchers;
+use runtime_zero::{
+    build_limits_effective_data, build_runtime_gates_data, build_security_posture_data,
+    build_system_info_data,
+};
 use users::{create_user, delete_user, patch_user, rotate_secret, users_from_config};
 
+pub(super) struct ApiRuntimeState {
+    pub(super) process_started_at_epoch_secs: u64,
+    pub(super) config_reload_count: AtomicU64,
+    pub(super) last_config_reload_epoch_secs: AtomicU64,
+    pub(super) admission_open: AtomicBool,
+}
+
 #[derive(Clone)]
 pub(super) struct ApiShared {
     pub(super) stats: Arc<Stats>,
     pub(super) ip_tracker: Arc<UserIpTracker>,
-    pub(super) me_pool: Option<Arc<MePool>>,
+    pub(super) me_pool: Arc<RwLock<Option<Arc<MePool>>>>,
     pub(super) upstream_manager: Arc<UpstreamManager>,
     pub(super) config_path: PathBuf,
-    pub(super) startup_detected_ip_v4: Option<IpAddr>,
-    pub(super) startup_detected_ip_v6: Option<IpAddr>,
+    pub(super) detected_ips_rx: watch::Receiver<(Option<IpAddr>, Option<IpAddr>)>,
     pub(super) mutation_lock: Arc<Mutex<()>>,
     pub(super) minimal_cache: Arc<Mutex<Option<MinimalCacheEntry>>>,
+    pub(super) runtime_edge_connections_cache: Arc<Mutex<Option<EdgeConnectionsCacheEntry>>>,
+    pub(super) runtime_edge_recompute_lock: Arc<Mutex<()>>,
+    pub(super) runtime_events: Arc<ApiEventStore>,
     pub(super) request_id: Arc<AtomicU64>,
+    pub(super) runtime_state: Arc<ApiRuntimeState>,
+    pub(super) startup_tracker: Arc<StartupTracker>,
+    pub(super) route_runtime: Arc<RouteRuntimeController>,
 }
 
 impl ApiShared {
     fn next_request_id(&self) -> u64 {
         self.request_id.fetch_add(1, Ordering::Relaxed)
     }
+
+    fn detected_link_ips(&self) -> (Option<IpAddr>, Option<IpAddr>) {
+        *self.detected_ips_rx.borrow()
+    }
 }
 
 pub async fn serve(
     listen: SocketAddr,
     stats: Arc<Stats>,
     ip_tracker: Arc<UserIpTracker>,
-    me_pool: Option<Arc<MePool>>,
+    me_pool: Arc<RwLock<Option<Arc<MePool>>>>,
+    route_runtime: Arc<RouteRuntimeController>,
     upstream_manager: Arc<UpstreamManager>,
     config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    admission_rx: watch::Receiver<bool>,
     config_path: PathBuf,
-    startup_detected_ip_v4: Option<IpAddr>,
-    startup_detected_ip_v6: Option<IpAddr>,
+    detected_ips_rx: watch::Receiver<(Option<IpAddr>, Option<IpAddr>)>,
+    process_started_at_epoch_secs: u64,
+    startup_tracker: Arc<StartupTracker>,
 ) {
     let listener = match TcpListener::bind(listen).await {
         Ok(listener) => listener,
@@ -83,19 +129,40 @@ pub async fn serve(
 
     info!("API endpoint: http://{}/v1/*", listen);
 
+    let runtime_state = Arc::new(ApiRuntimeState {
+        process_started_at_epoch_secs,
+        config_reload_count: AtomicU64::new(0),
+        last_config_reload_epoch_secs: AtomicU64::new(0),
+        admission_open: AtomicBool::new(*admission_rx.borrow()),
+    });
+
     let shared = Arc::new(ApiShared {
         stats,
         ip_tracker,
         me_pool,
         upstream_manager,
         config_path,
-        startup_detected_ip_v4,
-        startup_detected_ip_v6,
+        detected_ips_rx,
         mutation_lock: Arc::new(Mutex::new(())),
         minimal_cache: Arc::new(Mutex::new(None)),
+        runtime_edge_connections_cache: Arc::new(Mutex::new(None)),
+        runtime_edge_recompute_lock: Arc::new(Mutex::new(())),
+        runtime_events: Arc::new(ApiEventStore::new(
+            config_rx.borrow().server.api.runtime_edge_events_capacity,
+        )),
         request_id: Arc::new(AtomicU64::new(1)),
+        runtime_state: runtime_state.clone(),
+        startup_tracker,
+        route_runtime,
     });
 
+    spawn_runtime_watchers(
+        config_rx.clone(),
+        admission_rx.clone(),
+        runtime_state.clone(),
+        shared.runtime_events.clone(),
+    );
+
     loop {
         let (stream, peer) = match listener.accept().await {
             Ok(v) => v,
@@ -144,15 +211,15 @@ async fn handle(
         ));
     }
 
-    if !api_cfg.whitelist.is_empty()
-        && !api_cfg
-            .whitelist
-            .iter()
-            .any(|net| net.contains(peer.ip()))
+    if !api_cfg.whitelist.is_empty() && !api_cfg.whitelist.iter().any(|net| net.contains(peer.ip()))
     {
         return Ok(error_response(
             request_id,
-            ApiFailure::new(StatusCode::FORBIDDEN, "forbidden", "Source IP is not allowed"),
+            ApiFailure::new(
+                StatusCode::FORBIDDEN,
+                "forbidden",
+                "Source IP is not allowed",
+            ),
         ));
     }
 
@@ -177,6 +244,7 @@ async fn handle(
 
     let method = req.method().clone();
     let path = req.uri().path().to_string();
+    let query = req.uri().query().map(str::to_string);
     let body_limit = api_cfg.request_body_limit_bytes;
 
     let result: Result<Response<Full<Bytes>>, ApiFailure> = async {
@@ -189,6 +257,36 @@ async fn handle(
                 };
                 Ok(success_response(StatusCode::OK, data, revision))
             }
+            ("GET", "/v1/system/info") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_system_info_data(shared.as_ref(), cfg.as_ref(), &revision);
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/gates") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_gates_data(shared.as_ref(), cfg.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/initialization") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_initialization_data(shared.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/limits/effective") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_limits_effective_data(cfg.as_ref());
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/security/posture") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_security_posture_data(cfg.as_ref());
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/security/whitelist") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_security_whitelist_data(cfg.as_ref());
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
             ("GET", "/v1/stats/summary") => {
                 let revision = current_revision(&shared.config_path).await?;
                 let data = SummaryData {
@@ -225,14 +323,73 @@ async fn handle(
                 let data = build_dcs_data(shared.as_ref(), api_cfg).await;
                 Ok(success_response(StatusCode::OK, data, revision))
             }
+            ("GET", "/v1/runtime/me_pool_state") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_me_pool_state_data(shared.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/me_quality") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_me_quality_data(shared.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/upstream_quality") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_upstream_quality_data(shared.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/nat_stun") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_nat_stun_data(shared.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/me-selftest") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_me_selftest_data(shared.as_ref(), cfg.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/connections/summary") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data =
+                    build_runtime_connections_summary_data(shared.as_ref(), cfg.as_ref()).await;
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/runtime/events/recent") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let data = build_runtime_events_recent_data(
+                    shared.as_ref(),
+                    cfg.as_ref(),
+                    query.as_deref(),
+                );
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
+            ("GET", "/v1/stats/users/active-ips") => {
+                let revision = current_revision(&shared.config_path).await?;
+                let usernames: Vec<_> = cfg.access.users.keys().cloned().collect();
+                let active_ips_map = shared.ip_tracker.get_active_ips_for_users(&usernames).await;
+                let mut data: Vec<UserActiveIps> = active_ips_map
+                    .into_iter()
+                    .filter(|(_, ips)| !ips.is_empty())
+                    .map(|(username, active_ips)| UserActiveIps {
+                        username,
+                        active_ips,
+                    })
+                    .collect();
+                data.sort_by(|a, b| a.username.cmp(&b.username));
+                Ok(success_response(StatusCode::OK, data, revision))
+            }
             ("GET", "/v1/stats/users") | ("GET", "/v1/users") => {
                 let revision = current_revision(&shared.config_path).await?;
+                let disk_cfg = load_config_from_disk(&shared.config_path).await?;
+                let runtime_cfg = config_rx.borrow().clone();
+                let (detected_ip_v4, detected_ip_v6) = shared.detected_link_ips();
                 let users = users_from_config(
-                    &cfg,
+                    &disk_cfg,
                     &shared.stats,
                     &shared.ip_tracker,
-                    shared.startup_detected_ip_v4,
-                    shared.startup_detected_ip_v6,
+                    detected_ip_v4,
+                    detected_ip_v6,
+                    Some(runtime_cfg.as_ref()),
                 )
                 .await;
                 Ok(success_response(StatusCode::OK, users, revision))
@@ -250,8 +407,28 @@ async fn handle(
                 }
                 let expected_revision = parse_if_match(req.headers());
                 let body = read_json::<CreateUserRequest>(req.into_body(), body_limit).await?;
-                let (data, revision) = create_user(body, expected_revision, &shared).await?;
-                Ok(success_response(StatusCode::CREATED, data, revision))
+                let result = create_user(body, expected_revision, &shared).await;
+                let (mut data, revision) = match result {
+                    Ok(ok) => ok,
+                    Err(error) => {
+                        shared
+                            .runtime_events
+                            .record("api.user.create.failed", error.code);
+                        return Err(error);
+                    }
+                };
+                let runtime_cfg = config_rx.borrow().clone();
+                data.user.in_runtime = runtime_cfg.access.users.contains_key(&data.user.username);
+                shared.runtime_events.record(
+                    "api.user.create.ok",
+                    format!("username={}", data.user.username),
+                );
+                let status = if data.user.in_runtime {
+                    StatusCode::CREATED
+                } else {
+                    StatusCode::ACCEPTED
+                };
+                Ok(success_response(status, data, revision))
             }
             _ => {
                 if let Some(user) = path.strip_prefix("/v1/users/")
@@ -260,15 +437,20 @@ async fn handle(
                 {
                     if method == Method::GET {
                         let revision = current_revision(&shared.config_path).await?;
+                        let disk_cfg = load_config_from_disk(&shared.config_path).await?;
+                        let runtime_cfg = config_rx.borrow().clone();
+                        let (detected_ip_v4, detected_ip_v6) = shared.detected_link_ips();
                         let users = users_from_config(
-                            &cfg,
+                            &disk_cfg,
                             &shared.stats,
                             &shared.ip_tracker,
-                            shared.startup_detected_ip_v4,
-                            shared.startup_detected_ip_v6,
+                            detected_ip_v4,
+                            detected_ip_v6,
+                            Some(runtime_cfg.as_ref()),
                         )
                         .await;
-                        if let Some(user_info) = users.into_iter().find(|entry| entry.username == user)
+                        if let Some(user_info) =
+                            users.into_iter().find(|entry| entry.username == user)
                         {
                             return Ok(success_response(StatusCode::OK, user_info, revision));
                         }
@@ -289,10 +471,30 @@ async fn handle(
                             ));
                         }
                         let expected_revision = parse_if_match(req.headers());
-                        let body = read_json::<PatchUserRequest>(req.into_body(), body_limit).await?;
-                        let (data, revision) =
-                            patch_user(user, body, expected_revision, &shared).await?;
-                        return Ok(success_response(StatusCode::OK, data, revision));
+                        let body =
+                            read_json::<PatchUserRequest>(req.into_body(), body_limit).await?;
+                        let result = patch_user(user, body, expected_revision, &shared).await;
+                        let (mut data, revision) = match result {
+                            Ok(ok) => ok,
+                            Err(error) => {
+                                shared.runtime_events.record(
+                                    "api.user.patch.failed",
+                                    format!("username={} code={}", user, error.code),
+                                );
+                                return Err(error);
+                            }
+                        };
+                        let runtime_cfg = config_rx.borrow().clone();
+                        data.in_runtime = runtime_cfg.access.users.contains_key(&data.username);
+                        shared
+                            .runtime_events
+                            .record("api.user.patch.ok", format!("username={}", data.username));
+                        let status = if data.in_runtime {
+                            StatusCode::OK
+                        } else {
+                            StatusCode::ACCEPTED
+                        };
+                        return Ok(success_response(status, data, revision));
                     }
                     if method == Method::DELETE {
                         if api_cfg.read_only {
@@ -306,9 +508,32 @@ async fn handle(
                             ));
                         }
                         let expected_revision = parse_if_match(req.headers());
-                        let (deleted_user, revision) =
-                            delete_user(user, expected_revision, &shared).await?;
-                        return Ok(success_response(StatusCode::OK, deleted_user, revision));
+                        let result = delete_user(user, expected_revision, &shared).await;
+                        let (deleted_user, revision) = match result {
+                            Ok(ok) => ok,
+                            Err(error) => {
+                                shared.runtime_events.record(
+                                    "api.user.delete.failed",
+                                    format!("username={} code={}", user, error.code),
+                                );
+                                return Err(error);
+                            }
+                        };
+                        shared
+                            .runtime_events
+                            .record("api.user.delete.ok", format!("username={}", deleted_user));
+                        let runtime_cfg = config_rx.borrow().clone();
+                        let in_runtime = runtime_cfg.access.users.contains_key(&deleted_user);
+                        let response = DeleteUserResponse {
+                            username: deleted_user,
+                            in_runtime,
+                        };
+                        let status = if response.in_runtime {
+                            StatusCode::ACCEPTED
+                        } else {
+                            StatusCode::OK
+                        };
+                        return Ok(success_response(status, response, revision));
                     }
                     if method == Method::POST
                         && let Some(base_user) = user.strip_suffix("/rotate-secret")
@@ -329,10 +554,36 @@ async fn handle(
                         let body =
                             read_optional_json::<RotateSecretRequest>(req.into_body(), body_limit)
                                 .await?;
-                        let (data, revision) =
-                            rotate_secret(base_user, body.unwrap_or_default(), expected_revision, &shared)
-                                .await?;
-                        return Ok(success_response(StatusCode::OK, data, revision));
+                        let result = rotate_secret(
+                            base_user,
+                            body.unwrap_or_default(),
+                            expected_revision,
+                            &shared,
+                        )
+                        .await;
+                        let (mut data, revision) = match result {
+                            Ok(ok) => ok,
+                            Err(error) => {
+                                shared.runtime_events.record(
+                                    "api.user.rotate_secret.failed",
+                                    format!("username={} code={}", base_user, error.code),
+                                );
+                                return Err(error);
+                            }
+                        };
+                        let runtime_cfg = config_rx.borrow().clone();
+                        data.user.in_runtime =
+                            runtime_cfg.access.users.contains_key(&data.user.username);
+                        shared.runtime_events.record(
+                            "api.user.rotate_secret.ok",
+                            format!("username={}", base_user),
+                        );
+                        let status = if data.user.in_runtime {
+                            StatusCode::OK
+                        } else {
+                            StatusCode::ACCEPTED
+                        };
+                        return Ok(success_response(status, data, revision));
                     }
                     if method == Method::POST {
                         return Ok(error_response(
@@ -363,81 +614,3 @@ async fn handle(
         Err(error) => Ok(error_response(request_id, error)),
     }
 }
-
-fn success_response<T: Serialize>(
-    status: StatusCode,
-    data: T,
-    revision: String,
-) -> Response<Full<Bytes>> {
-    let payload = SuccessResponse {
-        ok: true,
-        data,
-        revision,
-    };
-    let body = serde_json::to_vec(&payload).unwrap_or_else(|_| b"{\"ok\":false}".to_vec());
-    Response::builder()
-        .status(status)
-        .header("content-type", "application/json; charset=utf-8")
-        .body(Full::new(Bytes::from(body)))
-        .unwrap()
-}
-
-fn error_response(request_id: u64, failure: ApiFailure) -> Response<Full<Bytes>> {
-    let payload = ErrorResponse {
-        ok: false,
-        error: ErrorBody {
-            code: failure.code,
-            message: failure.message,
-        },
-        request_id,
-    };
-    let body = serde_json::to_vec(&payload).unwrap_or_else(|_| {
-        format!(
-            "{{\"ok\":false,\"error\":{{\"code\":\"internal_error\",\"message\":\"serialization failed\"}},\"request_id\":{}}}",
-            request_id
-        )
-        .into_bytes()
-    });
-    Response::builder()
-        .status(failure.status)
-        .header("content-type", "application/json; charset=utf-8")
-        .body(Full::new(Bytes::from(body)))
-        .unwrap()
-}
-
-async fn read_json<T: DeserializeOwned>(body: Incoming, limit: usize) -> Result<T, ApiFailure> {
-    let bytes = read_body_with_limit(body, limit).await?;
-    serde_json::from_slice(&bytes).map_err(|_| ApiFailure::bad_request("Invalid JSON body"))
-}
-
-async fn read_optional_json<T: DeserializeOwned>(
-    body: Incoming,
-    limit: usize,
-) -> Result<Option<T>, ApiFailure> {
-    let bytes = read_body_with_limit(body, limit).await?;
-    if bytes.is_empty() {
-        return Ok(None);
-    }
-    serde_json::from_slice(&bytes)
-        .map(Some)
-        .map_err(|_| ApiFailure::bad_request("Invalid JSON body"))
-}
-
-async fn read_body_with_limit(body: Incoming, limit: usize) -> Result<Vec<u8>, ApiFailure> {
-    let mut collected = Vec::new();
-    let mut body = body;
-    while let Some(frame_result) = body.frame().await {
-        let frame = frame_result.map_err(|_| ApiFailure::bad_request("Invalid request body"))?;
-        if let Some(chunk) = frame.data_ref() {
-            if collected.len().saturating_add(chunk.len()) > limit {
-                return Err(ApiFailure::new(
-                    StatusCode::PAYLOAD_TOO_LARGE,
-                    "payload_too_large",
-                    format!("Body exceeds {} bytes", limit),
-                ));
-            }
-            collected.extend_from_slice(chunk);
-        }
-    }
-    Ok(collected)
-}

src/api/model.rs

@@ -1,10 +1,12 @@
 use std::net::IpAddr;
+use std::sync::OnceLock;
 
 use chrono::{DateTime, Utc};
 use hyper::StatusCode;
-use rand::Rng;
 use serde::{Deserialize, Serialize};
 
+use crate::crypto::SecureRandom;
+
 const MAX_USERNAME_LEN: usize = 64;
 
 #[derive(Debug)]
@@ -79,10 +81,21 @@ pub(super) struct ZeroCoreData {
     pub(super) connections_total: u64,
     pub(super) connections_bad_total: u64,
     pub(super) handshake_timeouts_total: u64,
+    pub(super) accept_permit_timeout_total: u64,
     pub(super) configured_users: usize,
     pub(super) telemetry_core_enabled: bool,
     pub(super) telemetry_user_enabled: bool,
     pub(super) telemetry_me_level: String,
+    pub(super) conntrack_control_enabled: bool,
+    pub(super) conntrack_control_available: bool,
+    pub(super) conntrack_pressure_active: bool,
+    pub(super) conntrack_event_queue_depth: u64,
+    pub(super) conntrack_rule_apply_ok: bool,
+    pub(super) conntrack_delete_attempt_total: u64,
+    pub(super) conntrack_delete_success_total: u64,
+    pub(super) conntrack_delete_not_found_total: u64,
+    pub(super) conntrack_delete_error_total: u64,
+    pub(super) conntrack_close_event_drop_total: u64,
 }
 
 #[derive(Serialize, Clone)]
@@ -134,6 +147,7 @@ pub(super) struct UpstreamSummaryData {
     pub(super) direct_total: usize,
     pub(super) socks4_total: usize,
     pub(super) socks5_total: usize,
+    pub(super) shadowsocks_total: usize,
 }
 
 #[derive(Serialize, Clone)]
@@ -171,6 +185,24 @@ pub(super) struct ZeroMiddleProxyData {
     pub(super) route_drop_queue_full_total: u64,
     pub(super) route_drop_queue_full_base_total: u64,
     pub(super) route_drop_queue_full_high_total: u64,
+    pub(super) d2c_batches_total: u64,
+    pub(super) d2c_batch_frames_total: u64,
+    pub(super) d2c_batch_bytes_total: u64,
+    pub(super) d2c_flush_reason_queue_drain_total: u64,
+    pub(super) d2c_flush_reason_batch_frames_total: u64,
+    pub(super) d2c_flush_reason_batch_bytes_total: u64,
+    pub(super) d2c_flush_reason_max_delay_total: u64,
+    pub(super) d2c_flush_reason_ack_immediate_total: u64,
+    pub(super) d2c_flush_reason_close_total: u64,
+    pub(super) d2c_data_frames_total: u64,
+    pub(super) d2c_ack_frames_total: u64,
+    pub(super) d2c_payload_bytes_total: u64,
+    pub(super) d2c_write_mode_coalesced_total: u64,
+    pub(super) d2c_write_mode_split_total: u64,
+    pub(super) d2c_quota_reject_pre_write_total: u64,
+    pub(super) d2c_quota_reject_post_write_total: u64,
+    pub(super) d2c_frame_buf_shrink_total: u64,
+    pub(super) d2c_frame_buf_shrink_bytes_total: u64,
     pub(super) socks_kdf_strict_reject_total: u64,
     pub(super) socks_kdf_compat_fallback_total: u64,
     pub(super) endpoint_quarantine_total: u64,
@@ -236,6 +268,8 @@ pub(super) struct MeWritersSummary {
     pub(super) required_writers: usize,
     pub(super) alive_writers: usize,
     pub(super) coverage_pct: f64,
+    pub(super) fresh_alive_writers: usize,
+    pub(super) fresh_coverage_pct: f64,
 }
 
 #[derive(Serialize, Clone)]
@@ -250,6 +284,12 @@ pub(super) struct MeWriterStatus {
     pub(super) bound_clients: usize,
     pub(super) idle_for_secs: Option<u64>,
     pub(super) rtt_ema_ms: Option<f64>,
+    pub(super) matches_active_generation: bool,
+    pub(super) in_desired_map: bool,
+    pub(super) allow_drain_fallback: bool,
+    pub(super) drain_started_at_epoch_secs: Option<u64>,
+    pub(super) drain_deadline_epoch_secs: Option<u64>,
+    pub(super) drain_over_ttl: bool,
 }
 
 #[derive(Serialize, Clone)]
@@ -266,15 +306,28 @@ pub(super) struct MeWritersData {
 pub(super) struct DcStatus {
     pub(super) dc: i16,
     pub(super) endpoints: Vec<String>,
+    pub(super) endpoint_writers: Vec<DcEndpointWriters>,
     pub(super) available_endpoints: usize,
     pub(super) available_pct: f64,
     pub(super) required_writers: usize,
+    pub(super) floor_min: usize,
+    pub(super) floor_target: usize,
+    pub(super) floor_max: usize,
+    pub(super) floor_capped: bool,
     pub(super) alive_writers: usize,
     pub(super) coverage_pct: f64,
+    pub(super) fresh_alive_writers: usize,
+    pub(super) fresh_coverage_pct: f64,
     pub(super) rtt_ms: Option<f64>,
     pub(super) load: usize,
 }
 
+#[derive(Serialize, Clone)]
+pub(super) struct DcEndpointWriters {
+    pub(super) endpoint: String,
+    pub(super) active_writers: usize,
+}
+
 #[derive(Serialize, Clone)]
 pub(super) struct DcStatusData {
     pub(super) middle_proxy_enabled: bool,
@@ -308,7 +361,27 @@ pub(super) struct MinimalMeRuntimeData {
     pub(super) floor_mode: &'static str,
     pub(super) adaptive_floor_idle_secs: u64,
     pub(super) adaptive_floor_min_writers_single_endpoint: u8,
+    pub(super) adaptive_floor_min_writers_multi_endpoint: u8,
     pub(super) adaptive_floor_recover_grace_secs: u64,
+    pub(super) adaptive_floor_writers_per_core_total: u16,
+    pub(super) adaptive_floor_cpu_cores_override: u16,
+    pub(super) adaptive_floor_max_extra_writers_single_per_core: u16,
+    pub(super) adaptive_floor_max_extra_writers_multi_per_core: u16,
+    pub(super) adaptive_floor_max_active_writers_per_core: u16,
+    pub(super) adaptive_floor_max_warm_writers_per_core: u16,
+    pub(super) adaptive_floor_max_active_writers_global: u32,
+    pub(super) adaptive_floor_max_warm_writers_global: u32,
+    pub(super) adaptive_floor_cpu_cores_detected: u32,
+    pub(super) adaptive_floor_cpu_cores_effective: u32,
+    pub(super) adaptive_floor_global_cap_raw: u64,
+    pub(super) adaptive_floor_global_cap_effective: u64,
+    pub(super) adaptive_floor_target_writers_total: u64,
+    pub(super) adaptive_floor_active_cap_configured: u64,
+    pub(super) adaptive_floor_active_cap_effective: u64,
+    pub(super) adaptive_floor_warm_cap_configured: u64,
+    pub(super) adaptive_floor_warm_cap_effective: u64,
+    pub(super) adaptive_floor_active_writers_current: u64,
+    pub(super) adaptive_floor_warm_writers_current: u64,
     pub(super) me_keepalive_enabled: bool,
     pub(super) me_keepalive_interval_secs: u64,
     pub(super) me_keepalive_jitter_secs: u64,
@@ -330,6 +403,8 @@ pub(super) struct MinimalMeRuntimeData {
     pub(super) me_single_endpoint_outage_backoff_max_ms: u64,
     pub(super) me_single_endpoint_shadow_rotate_every_secs: u64,
     pub(super) me_deterministic_writer_sort: bool,
+    pub(super) me_writer_pick_mode: &'static str,
+    pub(super) me_writer_pick_sample_size: u8,
     pub(super) me_socks_kdf_policy: &'static str,
     pub(super) quarantined_endpoints_total: usize,
     pub(super) quarantined_endpoints: Vec<MinimalQuarantineData>,
@@ -364,6 +439,7 @@ pub(super) struct UserLinks {
 #[derive(Serialize)]
 pub(super) struct UserInfo {
     pub(super) username: String,
+    pub(super) in_runtime: bool,
     pub(super) user_ad_tag: Option<String>,
     pub(super) max_tcp_conns: Option<usize>,
     pub(super) expiration_rfc3339: Option<String>,
@@ -378,12 +454,24 @@ pub(super) struct UserInfo {
     pub(super) links: UserLinks,
 }
 
+#[derive(Serialize)]
+pub(super) struct UserActiveIps {
+    pub(super) username: String,
+    pub(super) active_ips: Vec<IpAddr>,
+}
+
 #[derive(Serialize)]
 pub(super) struct CreateUserResponse {
     pub(super) user: UserInfo,
     pub(super) secret: String,
 }
 
+#[derive(Serialize)]
+pub(super) struct DeleteUserResponse {
+    pub(super) username: String,
+    pub(super) in_runtime: bool,
+}
+
 #[derive(Deserialize)]
 pub(super) struct CreateUserRequest {
     pub(super) username: String,
@@ -438,7 +526,9 @@ pub(super) fn is_valid_username(user: &str) -> bool {
 }
 
 pub(super) fn random_user_secret() -> String {
+    static API_SECRET_RNG: OnceLock<SecureRandom> = OnceLock::new();
+    let rng = API_SECRET_RNG.get_or_init(SecureRandom::new);
     let mut bytes = [0u8; 16];
-    rand::rng().fill(&mut bytes);
+    rng.fill(&mut bytes);
     hex::encode(bytes)
 }

src/api/runtime_edge.rs

@@ -0,0 +1,294 @@
+use std::cmp::Reverse;
+use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH};
+
+use serde::Serialize;
+
+use crate::config::ProxyConfig;
+
+use super::ApiShared;
+use super::events::ApiEventRecord;
+
+const FEATURE_DISABLED_REASON: &str = "feature_disabled";
+const SOURCE_UNAVAILABLE_REASON: &str = "source_unavailable";
+const EVENTS_DEFAULT_LIMIT: usize = 50;
+const EVENTS_MAX_LIMIT: usize = 1000;
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionUserData {
+    pub(super) username: String,
+    pub(super) current_connections: u64,
+    pub(super) total_octets: u64,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionTotalsData {
+    pub(super) current_connections: u64,
+    pub(super) current_connections_me: u64,
+    pub(super) current_connections_direct: u64,
+    pub(super) active_users: usize,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionTopData {
+    pub(super) limit: usize,
+    pub(super) by_connections: Vec<RuntimeEdgeConnectionUserData>,
+    pub(super) by_throughput: Vec<RuntimeEdgeConnectionUserData>,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionCacheData {
+    pub(super) ttl_ms: u64,
+    pub(super) served_from_cache: bool,
+    pub(super) stale_cache_used: bool,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionTelemetryData {
+    pub(super) user_enabled: bool,
+    pub(super) throughput_is_cumulative: bool,
+}
+
+#[derive(Clone, Serialize)]
+pub(super) struct RuntimeEdgeConnectionsSummaryPayload {
+    pub(super) cache: RuntimeEdgeConnectionCacheData,
+    pub(super) totals: RuntimeEdgeConnectionTotalsData,
+    pub(super) top: RuntimeEdgeConnectionTopData,
+    pub(super) telemetry: RuntimeEdgeConnectionTelemetryData,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeEdgeConnectionsSummaryData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeEdgeConnectionsSummaryPayload>,
+}
+
+#[derive(Clone)]
+pub(crate) struct EdgeConnectionsCacheEntry {
+    pub(super) expires_at: Instant,
+    pub(super) payload: RuntimeEdgeConnectionsSummaryPayload,
+    pub(super) generated_at_epoch_secs: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeEdgeEventsPayload {
+    pub(super) capacity: usize,
+    pub(super) dropped_total: u64,
+    pub(super) events: Vec<ApiEventRecord>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeEdgeEventsData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeEdgeEventsPayload>,
+}
+
+pub(super) async fn build_runtime_connections_summary_data(
+    shared: &ApiShared,
+    cfg: &ProxyConfig,
+) -> RuntimeEdgeConnectionsSummaryData {
+    let now_epoch_secs = now_epoch_secs();
+    let api_cfg = &cfg.server.api;
+    if !api_cfg.runtime_edge_enabled {
+        return RuntimeEdgeConnectionsSummaryData {
+            enabled: false,
+            reason: Some(FEATURE_DISABLED_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    }
+
+    let (generated_at_epoch_secs, payload) = match get_connections_payload_cached(
+        shared,
+        api_cfg.runtime_edge_cache_ttl_ms,
+        api_cfg.runtime_edge_top_n,
+    )
+    .await
+    {
+        Some(v) => v,
+        None => {
+            return RuntimeEdgeConnectionsSummaryData {
+                enabled: true,
+                reason: Some(SOURCE_UNAVAILABLE_REASON),
+                generated_at_epoch_secs: now_epoch_secs,
+                data: None,
+            };
+        }
+    };
+
+    RuntimeEdgeConnectionsSummaryData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs,
+        data: Some(payload),
+    }
+}
+
+pub(super) fn build_runtime_events_recent_data(
+    shared: &ApiShared,
+    cfg: &ProxyConfig,
+    query: Option<&str>,
+) -> RuntimeEdgeEventsData {
+    let now_epoch_secs = now_epoch_secs();
+    let api_cfg = &cfg.server.api;
+    if !api_cfg.runtime_edge_enabled {
+        return RuntimeEdgeEventsData {
+            enabled: false,
+            reason: Some(FEATURE_DISABLED_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    }
+
+    let limit = parse_recent_events_limit(query, EVENTS_DEFAULT_LIMIT, EVENTS_MAX_LIMIT);
+    let snapshot = shared.runtime_events.snapshot(limit);
+
+    RuntimeEdgeEventsData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs: now_epoch_secs,
+        data: Some(RuntimeEdgeEventsPayload {
+            capacity: snapshot.capacity,
+            dropped_total: snapshot.dropped_total,
+            events: snapshot.events,
+        }),
+    }
+}
+
+async fn get_connections_payload_cached(
+    shared: &ApiShared,
+    cache_ttl_ms: u64,
+    top_n: usize,
+) -> Option<(u64, RuntimeEdgeConnectionsSummaryPayload)> {
+    if cache_ttl_ms > 0 {
+        let now = Instant::now();
+        let cached = shared.runtime_edge_connections_cache.lock().await.clone();
+        if let Some(entry) = cached
+            && now < entry.expires_at
+        {
+            let mut payload = entry.payload;
+            payload.cache.served_from_cache = true;
+            payload.cache.stale_cache_used = false;
+            return Some((entry.generated_at_epoch_secs, payload));
+        }
+    }
+
+    let Ok(_guard) = shared.runtime_edge_recompute_lock.try_lock() else {
+        let cached = shared.runtime_edge_connections_cache.lock().await.clone();
+        if let Some(entry) = cached {
+            let mut payload = entry.payload;
+            payload.cache.served_from_cache = true;
+            payload.cache.stale_cache_used = true;
+            return Some((entry.generated_at_epoch_secs, payload));
+        }
+        return None;
+    };
+
+    let generated_at_epoch_secs = now_epoch_secs();
+    let payload = recompute_connections_payload(shared, cache_ttl_ms, top_n).await;
+
+    if cache_ttl_ms > 0 {
+        let entry = EdgeConnectionsCacheEntry {
+            expires_at: Instant::now() + Duration::from_millis(cache_ttl_ms),
+            payload: payload.clone(),
+            generated_at_epoch_secs,
+        };
+        *shared.runtime_edge_connections_cache.lock().await = Some(entry);
+    }
+
+    Some((generated_at_epoch_secs, payload))
+}
+
+async fn recompute_connections_payload(
+    shared: &ApiShared,
+    cache_ttl_ms: u64,
+    top_n: usize,
+) -> RuntimeEdgeConnectionsSummaryPayload {
+    let mut rows = Vec::<RuntimeEdgeConnectionUserData>::new();
+    let mut active_users = 0usize;
+    for entry in shared.stats.iter_user_stats() {
+        let user_stats = entry.value();
+        let current_connections = user_stats
+            .curr_connects
+            .load(std::sync::atomic::Ordering::Relaxed);
+        let total_octets = user_stats
+            .octets_from_client
+            .load(std::sync::atomic::Ordering::Relaxed)
+            .saturating_add(
+                user_stats
+                    .octets_to_client
+                    .load(std::sync::atomic::Ordering::Relaxed),
+            );
+        if current_connections > 0 {
+            active_users = active_users.saturating_add(1);
+        }
+        rows.push(RuntimeEdgeConnectionUserData {
+            username: entry.key().clone(),
+            current_connections,
+            total_octets,
+        });
+    }
+
+    let limit = top_n.max(1);
+    let mut by_connections = rows.clone();
+    by_connections.sort_by_key(|row| (Reverse(row.current_connections), row.username.clone()));
+    by_connections.truncate(limit);
+
+    let mut by_throughput = rows;
+    by_throughput.sort_by_key(|row| (Reverse(row.total_octets), row.username.clone()));
+    by_throughput.truncate(limit);
+
+    let telemetry = shared.stats.telemetry_policy();
+    RuntimeEdgeConnectionsSummaryPayload {
+        cache: RuntimeEdgeConnectionCacheData {
+            ttl_ms: cache_ttl_ms,
+            served_from_cache: false,
+            stale_cache_used: false,
+        },
+        totals: RuntimeEdgeConnectionTotalsData {
+            current_connections: shared.stats.get_current_connections_total(),
+            current_connections_me: shared.stats.get_current_connections_me(),
+            current_connections_direct: shared.stats.get_current_connections_direct(),
+            active_users,
+        },
+        top: RuntimeEdgeConnectionTopData {
+            limit,
+            by_connections,
+            by_throughput,
+        },
+        telemetry: RuntimeEdgeConnectionTelemetryData {
+            user_enabled: telemetry.user_enabled,
+            throughput_is_cumulative: true,
+        },
+    }
+}
+
+fn parse_recent_events_limit(query: Option<&str>, default_limit: usize, max_limit: usize) -> usize {
+    let Some(query) = query else {
+        return default_limit;
+    };
+    for pair in query.split('&') {
+        let mut split = pair.splitn(2, '=');
+        if split.next() == Some("limit")
+            && let Some(raw) = split.next()
+            && let Ok(parsed) = raw.parse::<usize>()
+        {
+            return parsed.clamp(1, max_limit);
+        }
+    }
+    default_limit
+}
+
+fn now_epoch_secs() -> u64 {
+    SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .unwrap_or_default()
+        .as_secs()
+}

src/api/runtime_init.rs

@@ -0,0 +1,182 @@
+use serde::Serialize;
+
+use crate::startup::{
+    COMPONENT_ME_CONNECTIVITY_PING, COMPONENT_ME_POOL_CONSTRUCT, COMPONENT_ME_POOL_INIT_STAGE1,
+    COMPONENT_ME_PROXY_CONFIG_V4, COMPONENT_ME_PROXY_CONFIG_V6, COMPONENT_ME_SECRET_FETCH,
+    StartupComponentStatus, StartupMeStatus, compute_progress_pct,
+};
+
+use super::ApiShared;
+
+#[derive(Serialize)]
+pub(super) struct RuntimeInitializationComponentData {
+    pub(super) id: &'static str,
+    pub(super) title: &'static str,
+    pub(super) status: &'static str,
+    pub(super) started_at_epoch_ms: Option<u64>,
+    pub(super) finished_at_epoch_ms: Option<u64>,
+    pub(super) duration_ms: Option<u64>,
+    pub(super) attempts: u32,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) details: Option<String>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeInitializationMeData {
+    pub(super) status: &'static str,
+    pub(super) current_stage: String,
+    pub(super) progress_pct: f64,
+    pub(super) init_attempt: u32,
+    pub(super) retry_limit: String,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_error: Option<String>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeInitializationData {
+    pub(super) status: &'static str,
+    pub(super) degraded: bool,
+    pub(super) current_stage: String,
+    pub(super) progress_pct: f64,
+    pub(super) started_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) ready_at_epoch_secs: Option<u64>,
+    pub(super) total_elapsed_ms: u64,
+    pub(super) transport_mode: String,
+    pub(super) me: RuntimeInitializationMeData,
+    pub(super) components: Vec<RuntimeInitializationComponentData>,
+}
+
+#[derive(Clone)]
+pub(super) struct RuntimeStartupSummaryData {
+    pub(super) status: &'static str,
+    pub(super) stage: String,
+    pub(super) progress_pct: f64,
+}
+
+pub(super) async fn build_runtime_startup_summary(shared: &ApiShared) -> RuntimeStartupSummaryData {
+    let snapshot = shared.startup_tracker.snapshot().await;
+    let me_pool_progress = current_me_pool_stage_progress(shared).await;
+    let progress_pct = compute_progress_pct(&snapshot, me_pool_progress);
+    RuntimeStartupSummaryData {
+        status: snapshot.status.as_str(),
+        stage: snapshot.current_stage,
+        progress_pct,
+    }
+}
+
+pub(super) async fn build_runtime_initialization_data(
+    shared: &ApiShared,
+) -> RuntimeInitializationData {
+    let snapshot = shared.startup_tracker.snapshot().await;
+    let me_pool_progress = current_me_pool_stage_progress(shared).await;
+    let progress_pct = compute_progress_pct(&snapshot, me_pool_progress);
+    let me_progress_pct = compute_me_progress_pct(&snapshot, me_pool_progress);
+
+    RuntimeInitializationData {
+        status: snapshot.status.as_str(),
+        degraded: snapshot.degraded,
+        current_stage: snapshot.current_stage,
+        progress_pct,
+        started_at_epoch_secs: snapshot.started_at_epoch_secs,
+        ready_at_epoch_secs: snapshot.ready_at_epoch_secs,
+        total_elapsed_ms: snapshot.total_elapsed_ms,
+        transport_mode: snapshot.transport_mode,
+        me: RuntimeInitializationMeData {
+            status: snapshot.me.status.as_str(),
+            current_stage: snapshot.me.current_stage,
+            progress_pct: me_progress_pct,
+            init_attempt: snapshot.me.init_attempt,
+            retry_limit: snapshot.me.retry_limit,
+            last_error: snapshot.me.last_error,
+        },
+        components: snapshot
+            .components
+            .into_iter()
+            .map(|component| RuntimeInitializationComponentData {
+                id: component.id,
+                title: component.title,
+                status: component.status.as_str(),
+                started_at_epoch_ms: component.started_at_epoch_ms,
+                finished_at_epoch_ms: component.finished_at_epoch_ms,
+                duration_ms: component.duration_ms,
+                attempts: component.attempts,
+                details: component.details,
+            })
+            .collect(),
+    }
+}
+
+fn compute_me_progress_pct(
+    snapshot: &crate::startup::StartupSnapshot,
+    me_pool_progress: Option<f64>,
+) -> f64 {
+    match snapshot.me.status {
+        StartupMeStatus::Pending => 0.0,
+        StartupMeStatus::Ready | StartupMeStatus::Failed | StartupMeStatus::Skipped => 100.0,
+        StartupMeStatus::Initializing => {
+            let mut total_weight = 0.0f64;
+            let mut completed_weight = 0.0f64;
+            for component in &snapshot.components {
+                if !is_me_component(component.id) {
+                    continue;
+                }
+                total_weight += component.weight;
+                let unit_progress = match component.status {
+                    StartupComponentStatus::Pending => 0.0,
+                    StartupComponentStatus::Running => {
+                        if component.id == COMPONENT_ME_POOL_INIT_STAGE1 {
+                            me_pool_progress.unwrap_or(0.0).clamp(0.0, 1.0)
+                        } else {
+                            0.0
+                        }
+                    }
+                    StartupComponentStatus::Ready
+                    | StartupComponentStatus::Failed
+                    | StartupComponentStatus::Skipped => 1.0,
+                };
+                completed_weight += component.weight * unit_progress;
+            }
+            if total_weight <= f64::EPSILON {
+                0.0
+            } else {
+                ((completed_weight / total_weight) * 100.0).clamp(0.0, 100.0)
+            }
+        }
+    }
+}
+
+fn is_me_component(component_id: &str) -> bool {
+    matches!(
+        component_id,
+        COMPONENT_ME_SECRET_FETCH
+            | COMPONENT_ME_PROXY_CONFIG_V4
+            | COMPONENT_ME_PROXY_CONFIG_V6
+            | COMPONENT_ME_POOL_CONSTRUCT
+            | COMPONENT_ME_POOL_INIT_STAGE1
+            | COMPONENT_ME_CONNECTIVITY_PING
+    )
+}
+
+async fn current_me_pool_stage_progress(shared: &ApiShared) -> Option<f64> {
+    let snapshot = shared.startup_tracker.snapshot().await;
+    if snapshot.me.status != StartupMeStatus::Initializing {
+        return None;
+    }
+
+    let pool = shared.me_pool.read().await.clone()?;
+    let status = pool.api_status_snapshot().await;
+    let configured_dc_groups = status.configured_dc_groups;
+    let covered_dc_groups = status.dcs.iter().filter(|dc| dc.alive_writers > 0).count();
+
+    let dc_coverage = ratio_01(covered_dc_groups, configured_dc_groups);
+    let writer_coverage = ratio_01(status.alive_writers, status.required_writers);
+    Some((0.7 * dc_coverage + 0.3 * writer_coverage).clamp(0.0, 1.0))
+}
+
+fn ratio_01(part: usize, total: usize) -> f64 {
+    if total == 0 {
+        return 0.0;
+    }
+    ((part as f64) / (total as f64)).clamp(0.0, 1.0)
+}

src/api/runtime_min.rs

@@ -0,0 +1,586 @@
+use std::collections::BTreeSet;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+use serde::Serialize;
+
+use crate::config::ProxyConfig;
+
+use super::ApiShared;
+
+const SOURCE_UNAVAILABLE_REASON: &str = "source_unavailable";
+
+#[derive(Serialize)]
+pub(super) struct SecurityWhitelistData {
+    pub(super) generated_at_epoch_secs: u64,
+    pub(super) enabled: bool,
+    pub(super) entries_total: usize,
+    pub(super) entries: Vec<String>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateGenerationData {
+    pub(super) active_generation: u64,
+    pub(super) warm_generation: u64,
+    pub(super) pending_hardswap_generation: u64,
+    pub(super) pending_hardswap_age_secs: Option<u64>,
+    pub(super) draining_generations: Vec<u64>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateHardswapData {
+    pub(super) enabled: bool,
+    pub(super) pending: bool,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateWriterContourData {
+    pub(super) warm: usize,
+    pub(super) active: usize,
+    pub(super) draining: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateWriterHealthData {
+    pub(super) healthy: usize,
+    pub(super) degraded: usize,
+    pub(super) draining: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateWriterData {
+    pub(super) total: usize,
+    pub(super) alive_non_draining: usize,
+    pub(super) draining: usize,
+    pub(super) degraded: usize,
+    pub(super) contour: RuntimeMePoolStateWriterContourData,
+    pub(super) health: RuntimeMePoolStateWriterHealthData,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateRefillDcData {
+    pub(super) dc: i16,
+    pub(super) family: &'static str,
+    pub(super) inflight: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateRefillData {
+    pub(super) inflight_endpoints_total: usize,
+    pub(super) inflight_dc_total: usize,
+    pub(super) by_dc: Vec<RuntimeMePoolStateRefillDcData>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStatePayload {
+    pub(super) generations: RuntimeMePoolStateGenerationData,
+    pub(super) hardswap: RuntimeMePoolStateHardswapData,
+    pub(super) writers: RuntimeMePoolStateWriterData,
+    pub(super) refill: RuntimeMePoolStateRefillData,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMePoolStateData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeMePoolStatePayload>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityCountersData {
+    pub(super) idle_close_by_peer_total: u64,
+    pub(super) reader_eof_total: u64,
+    pub(super) kdf_drift_total: u64,
+    pub(super) kdf_port_only_drift_total: u64,
+    pub(super) reconnect_attempt_total: u64,
+    pub(super) reconnect_success_total: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityRouteDropData {
+    pub(super) no_conn_total: u64,
+    pub(super) channel_closed_total: u64,
+    pub(super) queue_full_total: u64,
+    pub(super) queue_full_base_total: u64,
+    pub(super) queue_full_high_total: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityFamilyStateData {
+    pub(super) family: &'static str,
+    pub(super) state: &'static str,
+    pub(super) state_since_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) suppressed_until_epoch_secs: Option<u64>,
+    pub(super) fail_streak: u32,
+    pub(super) recover_success_streak: u32,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityDrainGateData {
+    pub(super) route_quorum_ok: bool,
+    pub(super) redundancy_ok: bool,
+    pub(super) block_reason: &'static str,
+    pub(super) updated_at_epoch_secs: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityDcRttData {
+    pub(super) dc: i16,
+    pub(super) rtt_ema_ms: Option<f64>,
+    pub(super) alive_writers: usize,
+    pub(super) required_writers: usize,
+    pub(super) coverage_pct: f64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityPayload {
+    pub(super) counters: RuntimeMeQualityCountersData,
+    pub(super) route_drops: RuntimeMeQualityRouteDropData,
+    pub(super) family_states: Vec<RuntimeMeQualityFamilyStateData>,
+    pub(super) drain_gate: RuntimeMeQualityDrainGateData,
+    pub(super) dc_rtt: Vec<RuntimeMeQualityDcRttData>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeQualityData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeMeQualityPayload>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualityPolicyData {
+    pub(super) connect_retry_attempts: u32,
+    pub(super) connect_retry_backoff_ms: u64,
+    pub(super) connect_budget_ms: u64,
+    pub(super) unhealthy_fail_threshold: u32,
+    pub(super) connect_failfast_hard_errors: bool,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualityCountersData {
+    pub(super) connect_attempt_total: u64,
+    pub(super) connect_success_total: u64,
+    pub(super) connect_fail_total: u64,
+    pub(super) connect_failfast_hard_error_total: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualitySummaryData {
+    pub(super) configured_total: usize,
+    pub(super) healthy_total: usize,
+    pub(super) unhealthy_total: usize,
+    pub(super) direct_total: usize,
+    pub(super) socks4_total: usize,
+    pub(super) socks5_total: usize,
+    pub(super) shadowsocks_total: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualityDcData {
+    pub(super) dc: i16,
+    pub(super) latency_ema_ms: Option<f64>,
+    pub(super) ip_preference: &'static str,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualityUpstreamData {
+    pub(super) upstream_id: usize,
+    pub(super) route_kind: &'static str,
+    pub(super) address: String,
+    pub(super) weight: u16,
+    pub(super) scopes: String,
+    pub(super) healthy: bool,
+    pub(super) fails: u32,
+    pub(super) last_check_age_secs: u64,
+    pub(super) effective_latency_ms: Option<f64>,
+    pub(super) dc: Vec<RuntimeUpstreamQualityDcData>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeUpstreamQualityData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    pub(super) policy: RuntimeUpstreamQualityPolicyData,
+    pub(super) counters: RuntimeUpstreamQualityCountersData,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) summary: Option<RuntimeUpstreamQualitySummaryData>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) upstreams: Option<Vec<RuntimeUpstreamQualityUpstreamData>>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunReflectionData {
+    pub(super) addr: String,
+    pub(super) age_secs: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunFlagsData {
+    pub(super) nat_probe_enabled: bool,
+    pub(super) nat_probe_disabled_runtime: bool,
+    pub(super) nat_probe_attempts: u8,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunServersData {
+    pub(super) configured: Vec<String>,
+    pub(super) live: Vec<String>,
+    pub(super) live_total: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunReflectionBlockData {
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) v4: Option<RuntimeNatStunReflectionData>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) v6: Option<RuntimeNatStunReflectionData>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunPayload {
+    pub(super) flags: RuntimeNatStunFlagsData,
+    pub(super) servers: RuntimeNatStunServersData,
+    pub(super) reflection: RuntimeNatStunReflectionBlockData,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) stun_backoff_remaining_ms: Option<u64>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeNatStunData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeNatStunPayload>,
+}
+
+pub(super) fn build_security_whitelist_data(cfg: &ProxyConfig) -> SecurityWhitelistData {
+    let entries = cfg
+        .server
+        .api
+        .whitelist
+        .iter()
+        .map(ToString::to_string)
+        .collect::<Vec<_>>();
+    SecurityWhitelistData {
+        generated_at_epoch_secs: now_epoch_secs(),
+        enabled: !entries.is_empty(),
+        entries_total: entries.len(),
+        entries,
+    }
+}
+
+pub(super) async fn build_runtime_me_pool_state_data(shared: &ApiShared) -> RuntimeMePoolStateData {
+    let now_epoch_secs = now_epoch_secs();
+    let Some(pool) = shared.me_pool.read().await.clone() else {
+        return RuntimeMePoolStateData {
+            enabled: false,
+            reason: Some(SOURCE_UNAVAILABLE_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    };
+
+    let status = pool.api_status_snapshot().await;
+    let runtime = pool.api_runtime_snapshot().await;
+    let refill = pool.api_refill_snapshot().await;
+
+    let mut draining_generations = BTreeSet::<u64>::new();
+    let mut contour_warm = 0usize;
+    let mut contour_active = 0usize;
+    let mut contour_draining = 0usize;
+    let mut draining = 0usize;
+    let mut degraded = 0usize;
+    let mut healthy = 0usize;
+
+    for writer in &status.writers {
+        if writer.draining {
+            draining_generations.insert(writer.generation);
+            draining += 1;
+        }
+        if writer.degraded && !writer.draining {
+            degraded += 1;
+        }
+        if !writer.degraded && !writer.draining {
+            healthy += 1;
+        }
+        match writer.state {
+            "warm" => contour_warm += 1,
+            "active" => contour_active += 1,
+            _ => contour_draining += 1,
+        }
+    }
+
+    RuntimeMePoolStateData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs: status.generated_at_epoch_secs,
+        data: Some(RuntimeMePoolStatePayload {
+            generations: RuntimeMePoolStateGenerationData {
+                active_generation: runtime.active_generation,
+                warm_generation: runtime.warm_generation,
+                pending_hardswap_generation: runtime.pending_hardswap_generation,
+                pending_hardswap_age_secs: runtime.pending_hardswap_age_secs,
+                draining_generations: draining_generations.into_iter().collect(),
+            },
+            hardswap: RuntimeMePoolStateHardswapData {
+                enabled: runtime.hardswap_enabled,
+                pending: runtime.pending_hardswap_generation != 0,
+            },
+            writers: RuntimeMePoolStateWriterData {
+                total: status.writers.len(),
+                alive_non_draining: status.writers.len().saturating_sub(draining),
+                draining,
+                degraded,
+                contour: RuntimeMePoolStateWriterContourData {
+                    warm: contour_warm,
+                    active: contour_active,
+                    draining: contour_draining,
+                },
+                health: RuntimeMePoolStateWriterHealthData {
+                    healthy,
+                    degraded,
+                    draining,
+                },
+            },
+            refill: RuntimeMePoolStateRefillData {
+                inflight_endpoints_total: refill.inflight_endpoints_total,
+                inflight_dc_total: refill.inflight_dc_total,
+                by_dc: refill
+                    .by_dc
+                    .into_iter()
+                    .map(|entry| RuntimeMePoolStateRefillDcData {
+                        dc: entry.dc,
+                        family: entry.family,
+                        inflight: entry.inflight,
+                    })
+                    .collect(),
+            },
+        }),
+    }
+}
+
+pub(super) async fn build_runtime_me_quality_data(shared: &ApiShared) -> RuntimeMeQualityData {
+    let now_epoch_secs = now_epoch_secs();
+    let Some(pool) = shared.me_pool.read().await.clone() else {
+        return RuntimeMeQualityData {
+            enabled: false,
+            reason: Some(SOURCE_UNAVAILABLE_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    };
+
+    let status = pool.api_status_snapshot().await;
+    let family_states = pool
+        .api_family_state_snapshot()
+        .into_iter()
+        .map(|entry| RuntimeMeQualityFamilyStateData {
+            family: entry.family,
+            state: entry.state,
+            state_since_epoch_secs: entry.state_since_epoch_secs,
+            suppressed_until_epoch_secs: entry.suppressed_until_epoch_secs,
+            fail_streak: entry.fail_streak,
+            recover_success_streak: entry.recover_success_streak,
+        })
+        .collect();
+    let drain_gate_snapshot = pool.api_drain_gate_snapshot();
+    RuntimeMeQualityData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs: status.generated_at_epoch_secs,
+        data: Some(RuntimeMeQualityPayload {
+            counters: RuntimeMeQualityCountersData {
+                idle_close_by_peer_total: shared.stats.get_me_idle_close_by_peer_total(),
+                reader_eof_total: shared.stats.get_me_reader_eof_total(),
+                kdf_drift_total: shared.stats.get_me_kdf_drift_total(),
+                kdf_port_only_drift_total: shared.stats.get_me_kdf_port_only_drift_total(),
+                reconnect_attempt_total: shared.stats.get_me_reconnect_attempts(),
+                reconnect_success_total: shared.stats.get_me_reconnect_success(),
+            },
+            route_drops: RuntimeMeQualityRouteDropData {
+                no_conn_total: shared.stats.get_me_route_drop_no_conn(),
+                channel_closed_total: shared.stats.get_me_route_drop_channel_closed(),
+                queue_full_total: shared.stats.get_me_route_drop_queue_full(),
+                queue_full_base_total: shared.stats.get_me_route_drop_queue_full_base(),
+                queue_full_high_total: shared.stats.get_me_route_drop_queue_full_high(),
+            },
+            family_states,
+            drain_gate: RuntimeMeQualityDrainGateData {
+                route_quorum_ok: drain_gate_snapshot.route_quorum_ok,
+                redundancy_ok: drain_gate_snapshot.redundancy_ok,
+                block_reason: drain_gate_snapshot.block_reason,
+                updated_at_epoch_secs: drain_gate_snapshot.updated_at_epoch_secs,
+            },
+            dc_rtt: status
+                .dcs
+                .into_iter()
+                .map(|dc| RuntimeMeQualityDcRttData {
+                    dc: dc.dc,
+                    rtt_ema_ms: dc.rtt_ms,
+                    alive_writers: dc.alive_writers,
+                    required_writers: dc.required_writers,
+                    coverage_pct: dc.coverage_pct,
+                })
+                .collect(),
+        }),
+    }
+}
+
+pub(super) async fn build_runtime_upstream_quality_data(
+    shared: &ApiShared,
+) -> RuntimeUpstreamQualityData {
+    let generated_at_epoch_secs = now_epoch_secs();
+    let policy = shared.upstream_manager.api_policy_snapshot();
+    let counters = RuntimeUpstreamQualityCountersData {
+        connect_attempt_total: shared.stats.get_upstream_connect_attempt_total(),
+        connect_success_total: shared.stats.get_upstream_connect_success_total(),
+        connect_fail_total: shared.stats.get_upstream_connect_fail_total(),
+        connect_failfast_hard_error_total: shared
+            .stats
+            .get_upstream_connect_failfast_hard_error_total(),
+    };
+
+    let Some(snapshot) = shared.upstream_manager.try_api_snapshot() else {
+        return RuntimeUpstreamQualityData {
+            enabled: false,
+            reason: Some(SOURCE_UNAVAILABLE_REASON),
+            generated_at_epoch_secs,
+            policy: RuntimeUpstreamQualityPolicyData {
+                connect_retry_attempts: policy.connect_retry_attempts,
+                connect_retry_backoff_ms: policy.connect_retry_backoff_ms,
+                connect_budget_ms: policy.connect_budget_ms,
+                unhealthy_fail_threshold: policy.unhealthy_fail_threshold,
+                connect_failfast_hard_errors: policy.connect_failfast_hard_errors,
+            },
+            counters,
+            summary: None,
+            upstreams: None,
+        };
+    };
+
+    RuntimeUpstreamQualityData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs,
+        policy: RuntimeUpstreamQualityPolicyData {
+            connect_retry_attempts: policy.connect_retry_attempts,
+            connect_retry_backoff_ms: policy.connect_retry_backoff_ms,
+            connect_budget_ms: policy.connect_budget_ms,
+            unhealthy_fail_threshold: policy.unhealthy_fail_threshold,
+            connect_failfast_hard_errors: policy.connect_failfast_hard_errors,
+        },
+        counters,
+        summary: Some(RuntimeUpstreamQualitySummaryData {
+            configured_total: snapshot.summary.configured_total,
+            healthy_total: snapshot.summary.healthy_total,
+            unhealthy_total: snapshot.summary.unhealthy_total,
+            direct_total: snapshot.summary.direct_total,
+            socks4_total: snapshot.summary.socks4_total,
+            socks5_total: snapshot.summary.socks5_total,
+            shadowsocks_total: snapshot.summary.shadowsocks_total,
+        }),
+        upstreams: Some(
+            snapshot
+                .upstreams
+                .into_iter()
+                .map(|upstream| RuntimeUpstreamQualityUpstreamData {
+                    upstream_id: upstream.upstream_id,
+                    route_kind: match upstream.route_kind {
+                        crate::transport::UpstreamRouteKind::Direct => "direct",
+                        crate::transport::UpstreamRouteKind::Socks4 => "socks4",
+                        crate::transport::UpstreamRouteKind::Socks5 => "socks5",
+                        crate::transport::UpstreamRouteKind::Shadowsocks => "shadowsocks",
+                    },
+                    address: upstream.address,
+                    weight: upstream.weight,
+                    scopes: upstream.scopes,
+                    healthy: upstream.healthy,
+                    fails: upstream.fails,
+                    last_check_age_secs: upstream.last_check_age_secs,
+                    effective_latency_ms: upstream.effective_latency_ms,
+                    dc: upstream
+                        .dc
+                        .into_iter()
+                        .map(|dc| RuntimeUpstreamQualityDcData {
+                            dc: dc.dc,
+                            latency_ema_ms: dc.latency_ema_ms,
+                            ip_preference: match dc.ip_preference {
+                                crate::transport::upstream::IpPreference::Unknown => "unknown",
+                                crate::transport::upstream::IpPreference::PreferV6 => "prefer_v6",
+                                crate::transport::upstream::IpPreference::PreferV4 => "prefer_v4",
+                                crate::transport::upstream::IpPreference::BothWork => "both_work",
+                                crate::transport::upstream::IpPreference::Unavailable => {
+                                    "unavailable"
+                                }
+                            },
+                        })
+                        .collect(),
+                })
+                .collect(),
+        ),
+    }
+}
+
+pub(super) async fn build_runtime_nat_stun_data(shared: &ApiShared) -> RuntimeNatStunData {
+    let now_epoch_secs = now_epoch_secs();
+    let Some(pool) = shared.me_pool.read().await.clone() else {
+        return RuntimeNatStunData {
+            enabled: false,
+            reason: Some(SOURCE_UNAVAILABLE_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    };
+
+    let snapshot = pool.api_nat_stun_snapshot().await;
+    RuntimeNatStunData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs: now_epoch_secs,
+        data: Some(RuntimeNatStunPayload {
+            flags: RuntimeNatStunFlagsData {
+                nat_probe_enabled: snapshot.nat_probe_enabled,
+                nat_probe_disabled_runtime: snapshot.nat_probe_disabled_runtime,
+                nat_probe_attempts: snapshot.nat_probe_attempts,
+            },
+            servers: RuntimeNatStunServersData {
+                configured: snapshot.configured_servers,
+                live: snapshot.live_servers.clone(),
+                live_total: snapshot.live_servers.len(),
+            },
+            reflection: RuntimeNatStunReflectionBlockData {
+                v4: snapshot
+                    .reflection_v4
+                    .map(|entry| RuntimeNatStunReflectionData {
+                        addr: entry.addr.to_string(),
+                        age_secs: entry.age_secs,
+                    }),
+                v6: snapshot
+                    .reflection_v6
+                    .map(|entry| RuntimeNatStunReflectionData {
+                        addr: entry.addr.to_string(),
+                        age_secs: entry.age_secs,
+                    }),
+            },
+            stun_backoff_remaining_ms: snapshot.stun_backoff_remaining_ms,
+        }),
+    }
+}
+
+fn now_epoch_secs() -> u64 {
+    SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .unwrap_or_default()
+        .as_secs()
+}

src/api/runtime_selftest.rs

@@ -0,0 +1,300 @@
+use std::collections::HashMap;
+use std::net::IpAddr;
+use std::sync::{Mutex, OnceLock};
+use std::time::{SystemTime, UNIX_EPOCH};
+
+use serde::Serialize;
+
+use crate::config::{ProxyConfig, UpstreamType};
+use crate::network::probe::{detect_interface_ipv4, detect_interface_ipv6, is_bogon};
+use crate::transport::UpstreamRouteKind;
+use crate::transport::middle_proxy::{bnd_snapshot, timeskew_snapshot, upstream_bnd_snapshots};
+
+use super::ApiShared;
+
+const SOURCE_UNAVAILABLE_REASON: &str = "source_unavailable";
+const KDF_EWMA_TAU_SECS: f64 = 600.0;
+const KDF_EWMA_THRESHOLD_ERRORS_PER_MIN: f64 = 0.30;
+const TIMESKEW_THRESHOLD_SECS: u64 = 60;
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestKdfData {
+    pub(super) state: &'static str,
+    pub(super) ewma_errors_per_min: f64,
+    pub(super) threshold_errors_per_min: f64,
+    pub(super) errors_total: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestTimeskewData {
+    pub(super) state: &'static str,
+    pub(super) max_skew_secs_15m: Option<u64>,
+    pub(super) samples_15m: usize,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_skew_secs: Option<u64>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_source: Option<&'static str>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_seen_age_secs: Option<u64>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestIpFamilyData {
+    pub(super) addr: String,
+    pub(super) state: &'static str,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestIpData {
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) v4: Option<RuntimeMeSelftestIpFamilyData>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) v6: Option<RuntimeMeSelftestIpFamilyData>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestPidData {
+    pub(super) pid: u32,
+    pub(super) state: &'static str,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestBndData {
+    pub(super) addr_state: &'static str,
+    pub(super) port_state: &'static str,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_addr: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_seen_age_secs: Option<u64>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestUpstreamData {
+    pub(super) upstream_id: usize,
+    pub(super) route_kind: &'static str,
+    pub(super) address: String,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) bnd: Option<RuntimeMeSelftestBndData>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) ip: Option<String>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestPayload {
+    pub(super) kdf: RuntimeMeSelftestKdfData,
+    pub(super) timeskew: RuntimeMeSelftestTimeskewData,
+    pub(super) ip: RuntimeMeSelftestIpData,
+    pub(super) pid: RuntimeMeSelftestPidData,
+    pub(super) bnd: Option<RuntimeMeSelftestBndData>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) upstreams: Option<Vec<RuntimeMeSelftestUpstreamData>>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeMeSelftestData {
+    pub(super) enabled: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reason: Option<&'static str>,
+    pub(super) generated_at_epoch_secs: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) data: Option<RuntimeMeSelftestPayload>,
+}
+
+#[derive(Default)]
+struct KdfEwmaState {
+    initialized: bool,
+    last_epoch_secs: u64,
+    last_total_errors: u64,
+    ewma_errors_per_min: f64,
+}
+
+static KDF_EWMA_STATE: OnceLock<Mutex<KdfEwmaState>> = OnceLock::new();
+
+fn kdf_ewma_state() -> &'static Mutex<KdfEwmaState> {
+    KDF_EWMA_STATE.get_or_init(|| Mutex::new(KdfEwmaState::default()))
+}
+
+pub(super) async fn build_runtime_me_selftest_data(
+    shared: &ApiShared,
+    cfg: &ProxyConfig,
+) -> RuntimeMeSelftestData {
+    let now_epoch_secs = now_epoch_secs();
+    if shared.me_pool.read().await.is_none() {
+        return RuntimeMeSelftestData {
+            enabled: false,
+            reason: Some(SOURCE_UNAVAILABLE_REASON),
+            generated_at_epoch_secs: now_epoch_secs,
+            data: None,
+        };
+    }
+
+    let kdf_errors_total = shared
+        .stats
+        .get_me_kdf_drift_total()
+        .saturating_add(shared.stats.get_me_socks_kdf_strict_reject());
+    let kdf_ewma = update_kdf_ewma(now_epoch_secs, kdf_errors_total);
+    let kdf_state = if kdf_ewma >= KDF_EWMA_THRESHOLD_ERRORS_PER_MIN {
+        "error"
+    } else {
+        "ok"
+    };
+
+    let skew = timeskew_snapshot();
+    let timeskew_state = if skew.max_skew_secs_15m.unwrap_or(0) > TIMESKEW_THRESHOLD_SECS {
+        "error"
+    } else {
+        "ok"
+    };
+
+    let ip_v4 = detect_interface_ipv4().map(|ip| RuntimeMeSelftestIpFamilyData {
+        addr: ip.to_string(),
+        state: classify_ip(IpAddr::V4(ip)),
+    });
+    let ip_v6 = detect_interface_ipv6().map(|ip| RuntimeMeSelftestIpFamilyData {
+        addr: ip.to_string(),
+        state: classify_ip(IpAddr::V6(ip)),
+    });
+
+    let pid = std::process::id();
+    let pid_state = if pid == 1 { "one" } else { "non-one" };
+
+    let has_socks_upstreams = cfg.upstreams.iter().any(|upstream| {
+        upstream.enabled
+            && matches!(
+                upstream.upstream_type,
+                UpstreamType::Socks4 { .. } | UpstreamType::Socks5 { .. }
+            )
+    });
+
+    let bnd = if has_socks_upstreams {
+        let snapshot = bnd_snapshot();
+        Some(RuntimeMeSelftestBndData {
+            addr_state: snapshot.addr_status,
+            port_state: snapshot.port_status,
+            last_addr: snapshot.last_addr.map(|value| value.to_string()),
+            last_seen_age_secs: snapshot.last_seen_age_secs,
+        })
+    } else {
+        None
+    };
+    let upstreams = build_upstream_selftest_data(shared);
+
+    RuntimeMeSelftestData {
+        enabled: true,
+        reason: None,
+        generated_at_epoch_secs: now_epoch_secs,
+        data: Some(RuntimeMeSelftestPayload {
+            kdf: RuntimeMeSelftestKdfData {
+                state: kdf_state,
+                ewma_errors_per_min: round3(kdf_ewma),
+                threshold_errors_per_min: KDF_EWMA_THRESHOLD_ERRORS_PER_MIN,
+                errors_total: kdf_errors_total,
+            },
+            timeskew: RuntimeMeSelftestTimeskewData {
+                state: timeskew_state,
+                max_skew_secs_15m: skew.max_skew_secs_15m,
+                samples_15m: skew.samples_15m,
+                last_skew_secs: skew.last_skew_secs,
+                last_source: skew.last_source,
+                last_seen_age_secs: skew.last_seen_age_secs,
+            },
+            ip: RuntimeMeSelftestIpData {
+                v4: ip_v4,
+                v6: ip_v6,
+            },
+            pid: RuntimeMeSelftestPidData {
+                pid,
+                state: pid_state,
+            },
+            bnd,
+            upstreams,
+        }),
+    }
+}
+
+fn build_upstream_selftest_data(shared: &ApiShared) -> Option<Vec<RuntimeMeSelftestUpstreamData>> {
+    let snapshot = shared.upstream_manager.try_api_snapshot()?;
+    if snapshot.summary.configured_total <= 1 {
+        return None;
+    }
+
+    let mut upstream_bnd_by_id: HashMap<usize, _> = upstream_bnd_snapshots()
+        .into_iter()
+        .map(|entry| (entry.upstream_id, entry))
+        .collect();
+    let mut rows = Vec::with_capacity(snapshot.upstreams.len());
+    for upstream in snapshot.upstreams {
+        let upstream_bnd = upstream_bnd_by_id.remove(&upstream.upstream_id);
+        rows.push(RuntimeMeSelftestUpstreamData {
+            upstream_id: upstream.upstream_id,
+            route_kind: map_route_kind(upstream.route_kind),
+            address: upstream.address,
+            bnd: upstream_bnd.as_ref().map(|entry| RuntimeMeSelftestBndData {
+                addr_state: entry.addr_status,
+                port_state: entry.port_status,
+                last_addr: entry.last_addr.map(|value| value.to_string()),
+                last_seen_age_secs: entry.last_seen_age_secs,
+            }),
+            ip: upstream_bnd.and_then(|entry| entry.last_ip.map(|value| value.to_string())),
+        });
+    }
+    Some(rows)
+}
+
+fn update_kdf_ewma(now_epoch_secs: u64, total_errors: u64) -> f64 {
+    let Ok(mut guard) = kdf_ewma_state().lock() else {
+        return 0.0;
+    };
+
+    if !guard.initialized {
+        guard.initialized = true;
+        guard.last_epoch_secs = now_epoch_secs;
+        guard.last_total_errors = total_errors;
+        guard.ewma_errors_per_min = 0.0;
+        return guard.ewma_errors_per_min;
+    }
+
+    let dt_secs = now_epoch_secs.saturating_sub(guard.last_epoch_secs);
+    if dt_secs == 0 {
+        return guard.ewma_errors_per_min;
+    }
+
+    let delta_errors = total_errors.saturating_sub(guard.last_total_errors);
+    let instant_rate_per_min = (delta_errors as f64) * 60.0 / (dt_secs as f64);
+    let alpha = 1.0 - f64::exp(-(dt_secs as f64) / KDF_EWMA_TAU_SECS);
+    guard.ewma_errors_per_min =
+        guard.ewma_errors_per_min + alpha * (instant_rate_per_min - guard.ewma_errors_per_min);
+    guard.last_epoch_secs = now_epoch_secs;
+    guard.last_total_errors = total_errors;
+    guard.ewma_errors_per_min
+}
+
+fn classify_ip(ip: IpAddr) -> &'static str {
+    if ip.is_loopback() {
+        return "loopback";
+    }
+    if is_bogon(ip) {
+        return "bogon";
+    }
+    "good"
+}
+
+fn map_route_kind(value: UpstreamRouteKind) -> &'static str {
+    match value {
+        UpstreamRouteKind::Direct => "direct",
+        UpstreamRouteKind::Socks4 => "socks4",
+        UpstreamRouteKind::Socks5 => "socks5",
+        UpstreamRouteKind::Shadowsocks => "shadowsocks",
+    }
+}
+
+fn round3(value: f64) -> f64 {
+    (value * 1000.0).round() / 1000.0
+}
+
+fn now_epoch_secs() -> u64 {
+    SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .unwrap_or_default()
+        .as_secs()
+}

src/api/runtime_stats.rs

@@ -2,15 +2,15 @@ use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH};
 
 use crate::config::ApiConfig;
 use crate::stats::Stats;
-use crate::transport::upstream::IpPreference;
 use crate::transport::UpstreamRouteKind;
+use crate::transport::upstream::IpPreference;
 
 use super::ApiShared;
 use super::model::{
-    DcStatus, DcStatusData, MeWriterStatus, MeWritersData, MeWritersSummary, MinimalAllData,
-    MinimalAllPayload, MinimalDcPathData, MinimalMeRuntimeData, MinimalQuarantineData,
-    UpstreamDcStatus, UpstreamStatus, UpstreamSummaryData, UpstreamsData, ZeroAllData,
-    ZeroCodeCount, ZeroCoreData, ZeroDesyncData, ZeroMiddleProxyData, ZeroPoolData,
+    DcEndpointWriters, DcStatus, DcStatusData, MeWriterStatus, MeWritersData, MeWritersSummary,
+    MinimalAllData, MinimalAllPayload, MinimalDcPathData, MinimalMeRuntimeData,
+    MinimalQuarantineData, UpstreamDcStatus, UpstreamStatus, UpstreamSummaryData, UpstreamsData,
+    ZeroAllData, ZeroCodeCount, ZeroCoreData, ZeroDesyncData, ZeroMiddleProxyData, ZeroPoolData,
     ZeroUpstreamData,
 };
 
@@ -39,10 +39,21 @@ pub(super) fn build_zero_all_data(stats: &Stats, configured_users: usize) -> Zer
             connections_total: stats.get_connects_all(),
             connections_bad_total: stats.get_connects_bad(),
             handshake_timeouts_total: stats.get_handshake_timeouts(),
+            accept_permit_timeout_total: stats.get_accept_permit_timeout_total(),
             configured_users,
             telemetry_core_enabled: telemetry.core_enabled,
             telemetry_user_enabled: telemetry.user_enabled,
             telemetry_me_level: telemetry.me_level.to_string(),
+            conntrack_control_enabled: stats.get_conntrack_control_enabled(),
+            conntrack_control_available: stats.get_conntrack_control_available(),
+            conntrack_pressure_active: stats.get_conntrack_pressure_active(),
+            conntrack_event_queue_depth: stats.get_conntrack_event_queue_depth(),
+            conntrack_rule_apply_ok: stats.get_conntrack_rule_apply_ok(),
+            conntrack_delete_attempt_total: stats.get_conntrack_delete_attempt_total(),
+            conntrack_delete_success_total: stats.get_conntrack_delete_success_total(),
+            conntrack_delete_not_found_total: stats.get_conntrack_delete_not_found_total(),
+            conntrack_delete_error_total: stats.get_conntrack_delete_error_total(),
+            conntrack_close_event_drop_total: stats.get_conntrack_close_event_drop_total(),
         },
         upstream: build_zero_upstream_data(stats),
         middle_proxy: ZeroMiddleProxyData {
@@ -68,6 +79,25 @@ pub(super) fn build_zero_all_data(stats: &Stats, configured_users: usize) -> Zer
             route_drop_queue_full_total: stats.get_me_route_drop_queue_full(),
             route_drop_queue_full_base_total: stats.get_me_route_drop_queue_full_base(),
             route_drop_queue_full_high_total: stats.get_me_route_drop_queue_full_high(),
+            d2c_batches_total: stats.get_me_d2c_batches_total(),
+            d2c_batch_frames_total: stats.get_me_d2c_batch_frames_total(),
+            d2c_batch_bytes_total: stats.get_me_d2c_batch_bytes_total(),
+            d2c_flush_reason_queue_drain_total: stats.get_me_d2c_flush_reason_queue_drain_total(),
+            d2c_flush_reason_batch_frames_total: stats.get_me_d2c_flush_reason_batch_frames_total(),
+            d2c_flush_reason_batch_bytes_total: stats.get_me_d2c_flush_reason_batch_bytes_total(),
+            d2c_flush_reason_max_delay_total: stats.get_me_d2c_flush_reason_max_delay_total(),
+            d2c_flush_reason_ack_immediate_total: stats
+                .get_me_d2c_flush_reason_ack_immediate_total(),
+            d2c_flush_reason_close_total: stats.get_me_d2c_flush_reason_close_total(),
+            d2c_data_frames_total: stats.get_me_d2c_data_frames_total(),
+            d2c_ack_frames_total: stats.get_me_d2c_ack_frames_total(),
+            d2c_payload_bytes_total: stats.get_me_d2c_payload_bytes_total(),
+            d2c_write_mode_coalesced_total: stats.get_me_d2c_write_mode_coalesced_total(),
+            d2c_write_mode_split_total: stats.get_me_d2c_write_mode_split_total(),
+            d2c_quota_reject_pre_write_total: stats.get_me_d2c_quota_reject_pre_write_total(),
+            d2c_quota_reject_post_write_total: stats.get_me_d2c_quota_reject_post_write_total(),
+            d2c_frame_buf_shrink_total: stats.get_me_d2c_frame_buf_shrink_total(),
+            d2c_frame_buf_shrink_bytes_total: stats.get_me_d2c_frame_buf_shrink_bytes_total(),
             socks_kdf_strict_reject_total: stats.get_me_socks_kdf_strict_reject(),
             socks_kdf_compat_fallback_total: stats.get_me_socks_kdf_compat_fallback(),
             endpoint_quarantine_total: stats.get_me_endpoint_quarantine_total(),
@@ -136,7 +166,8 @@ fn build_zero_upstream_data(stats: &Stats) -> ZeroUpstreamData {
             .get_upstream_connect_duration_success_bucket_501_1000ms(),
         connect_duration_success_bucket_gt_1000ms: stats
             .get_upstream_connect_duration_success_bucket_gt_1000ms(),
-        connect_duration_fail_bucket_le_100ms: stats.get_upstream_connect_duration_fail_bucket_le_100ms(),
+        connect_duration_fail_bucket_le_100ms: stats
+            .get_upstream_connect_duration_fail_bucket_le_100ms(),
         connect_duration_fail_bucket_101_500ms: stats
             .get_upstream_connect_duration_fail_bucket_101_500ms(),
         connect_duration_fail_bucket_501_1000ms: stats
@@ -178,6 +209,7 @@ pub(super) fn build_upstreams_data(shared: &ApiShared, api_cfg: &ApiConfig) -> U
         direct_total: snapshot.summary.direct_total,
         socks4_total: snapshot.summary.socks4_total,
         socks5_total: snapshot.summary.socks5_total,
+        shadowsocks_total: snapshot.summary.shadowsocks_total,
     };
     let upstreams = snapshot
         .upstreams
@@ -297,7 +329,7 @@ async fn get_minimal_payload_cached(
         }
     }
 
-    let pool = shared.me_pool.as_ref()?;
+    let pool = shared.me_pool.read().await.clone()?;
     let status = pool.api_status_snapshot().await;
     let runtime = pool.api_runtime_snapshot().await;
     let generated_at_epoch_secs = status.generated_at_epoch_secs;
@@ -314,6 +346,8 @@ async fn get_minimal_payload_cached(
             required_writers: status.required_writers,
             alive_writers: status.alive_writers,
             coverage_pct: status.coverage_pct,
+            fresh_alive_writers: status.fresh_alive_writers,
+            fresh_coverage_pct: status.fresh_coverage_pct,
         },
         writers: status
             .writers
@@ -329,6 +363,12 @@ async fn get_minimal_payload_cached(
                 bound_clients: entry.bound_clients,
                 idle_for_secs: entry.idle_for_secs,
                 rtt_ema_ms: entry.rtt_ema_ms,
+                matches_active_generation: entry.matches_active_generation,
+                in_desired_map: entry.in_desired_map,
+                allow_drain_fallback: entry.allow_drain_fallback,
+                drain_started_at_epoch_secs: entry.drain_started_at_epoch_secs,
+                drain_deadline_epoch_secs: entry.drain_deadline_epoch_secs,
+                drain_over_ttl: entry.drain_over_ttl,
             })
             .collect(),
     };
@@ -346,11 +386,25 @@ async fn get_minimal_payload_cached(
                     .into_iter()
                     .map(|value| value.to_string())
                     .collect(),
+                endpoint_writers: entry
+                    .endpoint_writers
+                    .into_iter()
+                    .map(|coverage| DcEndpointWriters {
+                        endpoint: coverage.endpoint.to_string(),
+                        active_writers: coverage.active_writers,
+                    })
+                    .collect(),
                 available_endpoints: entry.available_endpoints,
                 available_pct: entry.available_pct,
                 required_writers: entry.required_writers,
+                floor_min: entry.floor_min,
+                floor_target: entry.floor_target,
+                floor_max: entry.floor_max,
+                floor_capped: entry.floor_capped,
                 alive_writers: entry.alive_writers,
                 coverage_pct: entry.coverage_pct,
+                fresh_alive_writers: entry.fresh_alive_writers,
+                fresh_coverage_pct: entry.fresh_coverage_pct,
                 rtt_ms: entry.rtt_ms,
                 load: entry.load,
             })
@@ -366,7 +420,31 @@ async fn get_minimal_payload_cached(
         adaptive_floor_idle_secs: runtime.adaptive_floor_idle_secs,
         adaptive_floor_min_writers_single_endpoint: runtime
             .adaptive_floor_min_writers_single_endpoint,
+        adaptive_floor_min_writers_multi_endpoint: runtime
+            .adaptive_floor_min_writers_multi_endpoint,
         adaptive_floor_recover_grace_secs: runtime.adaptive_floor_recover_grace_secs,
+        adaptive_floor_writers_per_core_total: runtime.adaptive_floor_writers_per_core_total,
+        adaptive_floor_cpu_cores_override: runtime.adaptive_floor_cpu_cores_override,
+        adaptive_floor_max_extra_writers_single_per_core: runtime
+            .adaptive_floor_max_extra_writers_single_per_core,
+        adaptive_floor_max_extra_writers_multi_per_core: runtime
+            .adaptive_floor_max_extra_writers_multi_per_core,
+        adaptive_floor_max_active_writers_per_core: runtime
+            .adaptive_floor_max_active_writers_per_core,
+        adaptive_floor_max_warm_writers_per_core: runtime.adaptive_floor_max_warm_writers_per_core,
+        adaptive_floor_max_active_writers_global: runtime.adaptive_floor_max_active_writers_global,
+        adaptive_floor_max_warm_writers_global: runtime.adaptive_floor_max_warm_writers_global,
+        adaptive_floor_cpu_cores_detected: runtime.adaptive_floor_cpu_cores_detected,
+        adaptive_floor_cpu_cores_effective: runtime.adaptive_floor_cpu_cores_effective,
+        adaptive_floor_global_cap_raw: runtime.adaptive_floor_global_cap_raw,
+        adaptive_floor_global_cap_effective: runtime.adaptive_floor_global_cap_effective,
+        adaptive_floor_target_writers_total: runtime.adaptive_floor_target_writers_total,
+        adaptive_floor_active_cap_configured: runtime.adaptive_floor_active_cap_configured,
+        adaptive_floor_active_cap_effective: runtime.adaptive_floor_active_cap_effective,
+        adaptive_floor_warm_cap_configured: runtime.adaptive_floor_warm_cap_configured,
+        adaptive_floor_warm_cap_effective: runtime.adaptive_floor_warm_cap_effective,
+        adaptive_floor_active_writers_current: runtime.adaptive_floor_active_writers_current,
+        adaptive_floor_warm_writers_current: runtime.adaptive_floor_warm_writers_current,
         me_keepalive_enabled: runtime.me_keepalive_enabled,
         me_keepalive_interval_secs: runtime.me_keepalive_interval_secs,
         me_keepalive_jitter_secs: runtime.me_keepalive_jitter_secs,
@@ -390,6 +468,8 @@ async fn get_minimal_payload_cached(
         me_single_endpoint_shadow_rotate_every_secs: runtime
             .me_single_endpoint_shadow_rotate_every_secs,
         me_deterministic_writer_sort: runtime.me_deterministic_writer_sort,
+        me_writer_pick_mode: runtime.me_writer_pick_mode,
+        me_writer_pick_sample_size: runtime.me_writer_pick_sample_size,
         me_socks_kdf_policy: runtime.me_socks_kdf_policy,
         quarantined_endpoints_total: runtime.quarantined_endpoints.len(),
         quarantined_endpoints: runtime
@@ -444,6 +524,8 @@ fn disabled_me_writers(now_epoch_secs: u64, reason: &'static str) -> MeWritersDa
             required_writers: 0,
             alive_writers: 0,
             coverage_pct: 0.0,
+            fresh_alive_writers: 0,
+            fresh_coverage_pct: 0.0,
         },
         writers: Vec::new(),
     }
@@ -463,6 +545,7 @@ fn map_route_kind(value: UpstreamRouteKind) -> &'static str {
         UpstreamRouteKind::Direct => "direct",
         UpstreamRouteKind::Socks4 => "socks4",
         UpstreamRouteKind::Socks5 => "socks5",
+        UpstreamRouteKind::Shadowsocks => "shadowsocks",
     }
 }
 

src/api/runtime_watch.rs

@@ -0,0 +1,66 @@
+use std::sync::Arc;
+use std::sync::atomic::Ordering;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+use tokio::sync::watch;
+
+use crate::config::ProxyConfig;
+
+use super::ApiRuntimeState;
+use super::events::ApiEventStore;
+
+pub(super) fn spawn_runtime_watchers(
+    config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    admission_rx: watch::Receiver<bool>,
+    runtime_state: Arc<ApiRuntimeState>,
+    runtime_events: Arc<ApiEventStore>,
+) {
+    let mut config_rx_reload = config_rx;
+    let runtime_state_reload = runtime_state.clone();
+    let runtime_events_reload = runtime_events.clone();
+    tokio::spawn(async move {
+        loop {
+            if config_rx_reload.changed().await.is_err() {
+                break;
+            }
+            runtime_state_reload
+                .config_reload_count
+                .fetch_add(1, Ordering::Relaxed);
+            runtime_state_reload
+                .last_config_reload_epoch_secs
+                .store(now_epoch_secs(), Ordering::Relaxed);
+            runtime_events_reload.record("config.reload.applied", "config receiver updated");
+        }
+    });
+
+    let mut admission_rx_watch = admission_rx;
+    tokio::spawn(async move {
+        runtime_state
+            .admission_open
+            .store(*admission_rx_watch.borrow(), Ordering::Relaxed);
+        runtime_events.record(
+            "admission.state",
+            format!("accepting_new_connections={}", *admission_rx_watch.borrow()),
+        );
+        loop {
+            if admission_rx_watch.changed().await.is_err() {
+                break;
+            }
+            let admission_open = *admission_rx_watch.borrow();
+            runtime_state
+                .admission_open
+                .store(admission_open, Ordering::Relaxed);
+            runtime_events.record(
+                "admission.state",
+                format!("accepting_new_connections={}", admission_open),
+            );
+        }
+    });
+}
+
+fn now_epoch_secs() -> u64 {
+    SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .unwrap_or_default()
+        .as_secs()
+}

src/api/runtime_zero.rs

@@ -0,0 +1,338 @@
+use std::sync::atomic::Ordering;
+
+use serde::Serialize;
+
+use crate::config::{MeFloorMode, MeWriterPickMode, ProxyConfig, UserMaxUniqueIpsMode};
+use crate::proxy::route_mode::RelayRouteMode;
+
+use super::ApiShared;
+use super::runtime_init::build_runtime_startup_summary;
+
+#[derive(Serialize)]
+pub(super) struct SystemInfoData {
+    pub(super) version: String,
+    pub(super) target_arch: String,
+    pub(super) target_os: String,
+    pub(super) build_profile: String,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) git_commit: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) build_time_utc: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) rustc_version: Option<String>,
+    pub(super) process_started_at_epoch_secs: u64,
+    pub(super) uptime_seconds: f64,
+    pub(super) config_path: String,
+    pub(super) config_hash: String,
+    pub(super) config_reload_count: u64,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) last_config_reload_epoch_secs: Option<u64>,
+}
+
+#[derive(Serialize)]
+pub(super) struct RuntimeGatesData {
+    pub(super) accepting_new_connections: bool,
+    pub(super) conditional_cast_enabled: bool,
+    pub(super) me_runtime_ready: bool,
+    pub(super) me2dc_fallback_enabled: bool,
+    pub(super) me2dc_fast_enabled: bool,
+    pub(super) use_middle_proxy: bool,
+    pub(super) route_mode: &'static str,
+    pub(super) reroute_active: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reroute_to_direct_at_epoch_secs: Option<u64>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub(super) reroute_reason: Option<&'static str>,
+    pub(super) startup_status: &'static str,
+    pub(super) startup_stage: String,
+    pub(super) startup_progress_pct: f64,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveTimeoutLimits {
+    pub(super) client_first_byte_idle_secs: u64,
+    pub(super) client_handshake_secs: u64,
+    pub(super) tg_connect_secs: u64,
+    pub(super) client_keepalive_secs: u64,
+    pub(super) client_ack_secs: u64,
+    pub(super) me_one_retry: u8,
+    pub(super) me_one_timeout_ms: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveUpstreamLimits {
+    pub(super) connect_retry_attempts: u32,
+    pub(super) connect_retry_backoff_ms: u64,
+    pub(super) connect_budget_ms: u64,
+    pub(super) unhealthy_fail_threshold: u32,
+    pub(super) connect_failfast_hard_errors: bool,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveMiddleProxyLimits {
+    pub(super) floor_mode: &'static str,
+    pub(super) adaptive_floor_idle_secs: u64,
+    pub(super) adaptive_floor_min_writers_single_endpoint: u8,
+    pub(super) adaptive_floor_min_writers_multi_endpoint: u8,
+    pub(super) adaptive_floor_recover_grace_secs: u64,
+    pub(super) adaptive_floor_writers_per_core_total: u16,
+    pub(super) adaptive_floor_cpu_cores_override: u16,
+    pub(super) adaptive_floor_max_extra_writers_single_per_core: u16,
+    pub(super) adaptive_floor_max_extra_writers_multi_per_core: u16,
+    pub(super) adaptive_floor_max_active_writers_per_core: u16,
+    pub(super) adaptive_floor_max_warm_writers_per_core: u16,
+    pub(super) adaptive_floor_max_active_writers_global: u32,
+    pub(super) adaptive_floor_max_warm_writers_global: u32,
+    pub(super) reconnect_max_concurrent_per_dc: u32,
+    pub(super) reconnect_backoff_base_ms: u64,
+    pub(super) reconnect_backoff_cap_ms: u64,
+    pub(super) reconnect_fast_retry_count: u32,
+    pub(super) writer_pick_mode: &'static str,
+    pub(super) writer_pick_sample_size: u8,
+    pub(super) me2dc_fallback: bool,
+    pub(super) me2dc_fast: bool,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveUserIpPolicyLimits {
+    pub(super) global_each: usize,
+    pub(super) mode: &'static str,
+    pub(super) window_secs: u64,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveUserTcpPolicyLimits {
+    pub(super) global_each: usize,
+}
+
+#[derive(Serialize)]
+pub(super) struct EffectiveLimitsData {
+    pub(super) update_every_secs: u64,
+    pub(super) me_reinit_every_secs: u64,
+    pub(super) me_pool_force_close_secs: u64,
+    pub(super) timeouts: EffectiveTimeoutLimits,
+    pub(super) upstream: EffectiveUpstreamLimits,
+    pub(super) middle_proxy: EffectiveMiddleProxyLimits,
+    pub(super) user_ip_policy: EffectiveUserIpPolicyLimits,
+    pub(super) user_tcp_policy: EffectiveUserTcpPolicyLimits,
+}
+
+#[derive(Serialize)]
+pub(super) struct SecurityPostureData {
+    pub(super) api_read_only: bool,
+    pub(super) api_whitelist_enabled: bool,
+    pub(super) api_whitelist_entries: usize,
+    pub(super) api_auth_header_enabled: bool,
+    pub(super) proxy_protocol_enabled: bool,
+    pub(super) log_level: String,
+    pub(super) telemetry_core_enabled: bool,
+    pub(super) telemetry_user_enabled: bool,
+    pub(super) telemetry_me_level: String,
+}
+
+pub(super) fn build_system_info_data(
+    shared: &ApiShared,
+    _cfg: &ProxyConfig,
+    revision: &str,
+) -> SystemInfoData {
+    let last_reload_epoch_secs = shared
+        .runtime_state
+        .last_config_reload_epoch_secs
+        .load(Ordering::Relaxed);
+    let last_config_reload_epoch_secs =
+        (last_reload_epoch_secs > 0).then_some(last_reload_epoch_secs);
+
+    let git_commit = option_env!("TELEMT_GIT_COMMIT")
+        .or(option_env!("VERGEN_GIT_SHA"))
+        .or(option_env!("GIT_COMMIT"))
+        .map(ToString::to_string);
+    let build_time_utc = option_env!("BUILD_TIME_UTC")
+        .or(option_env!("VERGEN_BUILD_TIMESTAMP"))
+        .map(ToString::to_string);
+    let rustc_version = option_env!("RUSTC_VERSION")
+        .or(option_env!("VERGEN_RUSTC_SEMVER"))
+        .map(ToString::to_string);
+
+    SystemInfoData {
+        version: env!("CARGO_PKG_VERSION").to_string(),
+        target_arch: std::env::consts::ARCH.to_string(),
+        target_os: std::env::consts::OS.to_string(),
+        build_profile: option_env!("PROFILE").unwrap_or("unknown").to_string(),
+        git_commit,
+        build_time_utc,
+        rustc_version,
+        process_started_at_epoch_secs: shared.runtime_state.process_started_at_epoch_secs,
+        uptime_seconds: shared.stats.uptime_secs(),
+        config_path: shared.config_path.display().to_string(),
+        config_hash: revision.to_string(),
+        config_reload_count: shared
+            .runtime_state
+            .config_reload_count
+            .load(Ordering::Relaxed),
+        last_config_reload_epoch_secs,
+    }
+}
+
+pub(super) async fn build_runtime_gates_data(
+    shared: &ApiShared,
+    cfg: &ProxyConfig,
+) -> RuntimeGatesData {
+    let startup_summary = build_runtime_startup_summary(shared).await;
+    let route_state = shared.route_runtime.snapshot();
+    let route_mode = route_state.mode.as_str();
+    let fast_fallback_enabled =
+        cfg.general.use_middle_proxy && cfg.general.me2dc_fallback && cfg.general.me2dc_fast;
+    let reroute_active = cfg.general.use_middle_proxy
+        && cfg.general.me2dc_fallback
+        && matches!(route_state.mode, RelayRouteMode::Direct);
+    let reroute_to_direct_at_epoch_secs = if reroute_active {
+        shared.route_runtime.direct_since_epoch_secs()
+    } else {
+        None
+    };
+    let reroute_reason = if reroute_active {
+        if fast_fallback_enabled {
+            Some("fast_not_ready_fallback")
+        } else {
+            Some("strict_grace_fallback")
+        }
+    } else {
+        None
+    };
+    let me_runtime_ready = if !cfg.general.use_middle_proxy {
+        true
+    } else {
+        shared
+            .me_pool
+            .read()
+            .await
+            .as_ref()
+            .map(|pool| pool.is_runtime_ready())
+            .unwrap_or(false)
+    };
+
+    RuntimeGatesData {
+        accepting_new_connections: shared.runtime_state.admission_open.load(Ordering::Relaxed),
+        conditional_cast_enabled: cfg.general.use_middle_proxy,
+        me_runtime_ready,
+        me2dc_fallback_enabled: cfg.general.me2dc_fallback,
+        me2dc_fast_enabled: fast_fallback_enabled,
+        use_middle_proxy: cfg.general.use_middle_proxy,
+        route_mode,
+        reroute_active,
+        reroute_to_direct_at_epoch_secs,
+        reroute_reason,
+        startup_status: startup_summary.status,
+        startup_stage: startup_summary.stage,
+        startup_progress_pct: startup_summary.progress_pct,
+    }
+}
+
+pub(super) fn build_limits_effective_data(cfg: &ProxyConfig) -> EffectiveLimitsData {
+    EffectiveLimitsData {
+        update_every_secs: cfg.general.effective_update_every_secs(),
+        me_reinit_every_secs: cfg.general.effective_me_reinit_every_secs(),
+        me_pool_force_close_secs: cfg.general.effective_me_pool_force_close_secs(),
+        timeouts: EffectiveTimeoutLimits {
+            client_first_byte_idle_secs: cfg.timeouts.client_first_byte_idle_secs,
+            client_handshake_secs: cfg.timeouts.client_handshake,
+            tg_connect_secs: cfg.general.tg_connect,
+            client_keepalive_secs: cfg.timeouts.client_keepalive,
+            client_ack_secs: cfg.timeouts.client_ack,
+            me_one_retry: cfg.timeouts.me_one_retry,
+            me_one_timeout_ms: cfg.timeouts.me_one_timeout_ms,
+        },
+        upstream: EffectiveUpstreamLimits {
+            connect_retry_attempts: cfg.general.upstream_connect_retry_attempts,
+            connect_retry_backoff_ms: cfg.general.upstream_connect_retry_backoff_ms,
+            connect_budget_ms: cfg.general.upstream_connect_budget_ms,
+            unhealthy_fail_threshold: cfg.general.upstream_unhealthy_fail_threshold,
+            connect_failfast_hard_errors: cfg.general.upstream_connect_failfast_hard_errors,
+        },
+        middle_proxy: EffectiveMiddleProxyLimits {
+            floor_mode: me_floor_mode_label(cfg.general.me_floor_mode),
+            adaptive_floor_idle_secs: cfg.general.me_adaptive_floor_idle_secs,
+            adaptive_floor_min_writers_single_endpoint: cfg
+                .general
+                .me_adaptive_floor_min_writers_single_endpoint,
+            adaptive_floor_min_writers_multi_endpoint: cfg
+                .general
+                .me_adaptive_floor_min_writers_multi_endpoint,
+            adaptive_floor_recover_grace_secs: cfg.general.me_adaptive_floor_recover_grace_secs,
+            adaptive_floor_writers_per_core_total: cfg
+                .general
+                .me_adaptive_floor_writers_per_core_total,
+            adaptive_floor_cpu_cores_override: cfg.general.me_adaptive_floor_cpu_cores_override,
+            adaptive_floor_max_extra_writers_single_per_core: cfg
+                .general
+                .me_adaptive_floor_max_extra_writers_single_per_core,
+            adaptive_floor_max_extra_writers_multi_per_core: cfg
+                .general
+                .me_adaptive_floor_max_extra_writers_multi_per_core,
+            adaptive_floor_max_active_writers_per_core: cfg
+                .general
+                .me_adaptive_floor_max_active_writers_per_core,
+            adaptive_floor_max_warm_writers_per_core: cfg
+                .general
+                .me_adaptive_floor_max_warm_writers_per_core,
+            adaptive_floor_max_active_writers_global: cfg
+                .general
+                .me_adaptive_floor_max_active_writers_global,
+            adaptive_floor_max_warm_writers_global: cfg
+                .general
+                .me_adaptive_floor_max_warm_writers_global,
+            reconnect_max_concurrent_per_dc: cfg.general.me_reconnect_max_concurrent_per_dc,
+            reconnect_backoff_base_ms: cfg.general.me_reconnect_backoff_base_ms,
+            reconnect_backoff_cap_ms: cfg.general.me_reconnect_backoff_cap_ms,
+            reconnect_fast_retry_count: cfg.general.me_reconnect_fast_retry_count,
+            writer_pick_mode: me_writer_pick_mode_label(cfg.general.me_writer_pick_mode),
+            writer_pick_sample_size: cfg.general.me_writer_pick_sample_size,
+            me2dc_fallback: cfg.general.me2dc_fallback,
+            me2dc_fast: cfg.general.me2dc_fast,
+        },
+        user_ip_policy: EffectiveUserIpPolicyLimits {
+            global_each: cfg.access.user_max_unique_ips_global_each,
+            mode: user_max_unique_ips_mode_label(cfg.access.user_max_unique_ips_mode),
+            window_secs: cfg.access.user_max_unique_ips_window_secs,
+        },
+        user_tcp_policy: EffectiveUserTcpPolicyLimits {
+            global_each: cfg.access.user_max_tcp_conns_global_each,
+        },
+    }
+}
+
+pub(super) fn build_security_posture_data(cfg: &ProxyConfig) -> SecurityPostureData {
+    SecurityPostureData {
+        api_read_only: cfg.server.api.read_only,
+        api_whitelist_enabled: !cfg.server.api.whitelist.is_empty(),
+        api_whitelist_entries: cfg.server.api.whitelist.len(),
+        api_auth_header_enabled: !cfg.server.api.auth_header.is_empty(),
+        proxy_protocol_enabled: cfg.server.proxy_protocol,
+        log_level: cfg.general.log_level.to_string(),
+        telemetry_core_enabled: cfg.general.telemetry.core_enabled,
+        telemetry_user_enabled: cfg.general.telemetry.user_enabled,
+        telemetry_me_level: cfg.general.telemetry.me_level.to_string(),
+    }
+}
+
+fn user_max_unique_ips_mode_label(mode: UserMaxUniqueIpsMode) -> &'static str {
+    match mode {
+        UserMaxUniqueIpsMode::ActiveWindow => "active_window",
+        UserMaxUniqueIpsMode::TimeWindow => "time_window",
+        UserMaxUniqueIpsMode::Combined => "combined",
+    }
+}
+
+fn me_floor_mode_label(mode: MeFloorMode) -> &'static str {
+    match mode {
+        MeFloorMode::Static => "static",
+        MeFloorMode::Adaptive => "adaptive",
+    }
+}
+
+fn me_writer_pick_mode_label(mode: MeWriterPickMode) -> &'static str {
+    match mode {
+        MeWriterPickMode::SortedRr => "sorted_rr",
+        MeWriterPickMode::P2c => "p2c",
+    }
+}

src/api/users.rs

@@ -8,7 +8,8 @@ use crate::stats::Stats;
 
 use super::ApiShared;
 use super::config_store::{
-    ensure_expected_revision, load_config_from_disk, save_config_to_disk,
+    AccessSection, ensure_expected_revision, load_config_from_disk, save_access_sections_to_disk,
+    save_config_to_disk,
 };
 use super::model::{
     ApiFailure, CreateUserRequest, CreateUserResponse, PatchUserRequest, RotateSecretRequest,
@@ -21,6 +22,12 @@ pub(super) async fn create_user(
     expected_revision: Option<String>,
     shared: &ApiShared,
 ) -> Result<(CreateUserResponse, String), ApiFailure> {
+    let touches_user_ad_tags = body.user_ad_tag.is_some();
+    let touches_user_max_tcp_conns = body.max_tcp_conns.is_some();
+    let touches_user_expirations = body.expiration_rfc3339.is_some();
+    let touches_user_data_quota = body.data_quota_bytes.is_some();
+    let touches_user_max_unique_ips = body.max_unique_ips.is_some();
+
     if !is_valid_username(&body.username) {
         return Err(ApiFailure::bad_request(
             "username must match [A-Za-z0-9_.-] and be 1..64 chars",
@@ -39,7 +46,9 @@ pub(super) async fn create_user(
         None => random_user_secret(),
     };
 
-    if let Some(ad_tag) = body.user_ad_tag.as_ref() && !is_valid_ad_tag(ad_tag) {
+    if let Some(ad_tag) = body.user_ad_tag.as_ref()
+        && !is_valid_ad_tag(ad_tag)
+    {
         return Err(ApiFailure::bad_request(
             "user_ad_tag must be exactly 32 hex characters",
         ));
@@ -58,12 +67,18 @@ pub(super) async fn create_user(
         ));
     }
 
-    cfg.access.users.insert(body.username.clone(), secret.clone());
+    cfg.access
+        .users
+        .insert(body.username.clone(), secret.clone());
     if let Some(ad_tag) = body.user_ad_tag {
-        cfg.access.user_ad_tags.insert(body.username.clone(), ad_tag);
+        cfg.access
+            .user_ad_tags
+            .insert(body.username.clone(), ad_tag);
     }
     if let Some(limit) = body.max_tcp_conns {
-        cfg.access.user_max_tcp_conns.insert(body.username.clone(), limit);
+        cfg.access
+            .user_max_tcp_conns
+            .insert(body.username.clone(), limit);
     }
     if let Some(expiration) = expiration {
         cfg.access
@@ -71,7 +86,9 @@ pub(super) async fn create_user(
             .insert(body.username.clone(), expiration);
     }
     if let Some(quota) = body.data_quota_bytes {
-        cfg.access.user_data_quota.insert(body.username.clone(), quota);
+        cfg.access
+            .user_data_quota
+            .insert(body.username.clone(), quota);
     }
 
     let updated_limit = body.max_unique_ips;
@@ -84,19 +101,42 @@ pub(super) async fn create_user(
     cfg.validate()
         .map_err(|e| ApiFailure::bad_request(format!("config validation failed: {}", e)))?;
 
-    let revision = save_config_to_disk(&shared.config_path, &cfg).await?;
+    let mut touched_sections = vec![AccessSection::Users];
+    if touches_user_ad_tags {
+        touched_sections.push(AccessSection::UserAdTags);
+    }
+    if touches_user_max_tcp_conns {
+        touched_sections.push(AccessSection::UserMaxTcpConns);
+    }
+    if touches_user_expirations {
+        touched_sections.push(AccessSection::UserExpirations);
+    }
+    if touches_user_data_quota {
+        touched_sections.push(AccessSection::UserDataQuota);
+    }
+    if touches_user_max_unique_ips {
+        touched_sections.push(AccessSection::UserMaxUniqueIps);
+    }
+
+    let revision =
+        save_access_sections_to_disk(&shared.config_path, &cfg, &touched_sections).await?;
     drop(_guard);
 
     if let Some(limit) = updated_limit {
-        shared.ip_tracker.set_user_limit(&body.username, limit).await;
+        shared
+            .ip_tracker
+            .set_user_limit(&body.username, limit)
+            .await;
     }
+    let (detected_ip_v4, detected_ip_v6) = shared.detected_link_ips();
 
     let users = users_from_config(
         &cfg,
         &shared.stats,
         &shared.ip_tracker,
-        shared.startup_detected_ip_v4,
-        shared.startup_detected_ip_v6,
+        detected_ip_v4,
+        detected_ip_v6,
+        None,
     )
     .await;
     let user = users
@@ -104,8 +144,16 @@ pub(super) async fn create_user(
         .find(|entry| entry.username == body.username)
         .unwrap_or(UserInfo {
             username: body.username.clone(),
+            in_runtime: false,
             user_ad_tag: None,
-            max_tcp_conns: None,
+            max_tcp_conns: cfg
+                .access
+                .user_max_tcp_conns
+                .get(&body.username)
+                .copied()
+                .filter(|limit| *limit > 0)
+                .or((cfg.access.user_max_tcp_conns_global_each > 0)
+                    .then_some(cfg.access.user_max_tcp_conns_global_each)),
             expiration_rfc3339: None,
             data_quota_bytes: None,
             max_unique_ips: updated_limit,
@@ -115,12 +163,7 @@ pub(super) async fn create_user(
             recent_unique_ips: 0,
             recent_unique_ips_list: Vec::new(),
             total_octets: 0,
-            links: build_user_links(
-                &cfg,
-                &secret,
-                shared.startup_detected_ip_v4,
-                shared.startup_detected_ip_v6,
-            ),
+            links: build_user_links(&cfg, &secret, detected_ip_v4, detected_ip_v6),
         });
 
     Ok((CreateUserResponse { user, secret }, revision))
@@ -132,12 +175,16 @@ pub(super) async fn patch_user(
     expected_revision: Option<String>,
     shared: &ApiShared,
 ) -> Result<(UserInfo, String), ApiFailure> {
-    if let Some(secret) = body.secret.as_ref() && !is_valid_user_secret(secret) {
+    if let Some(secret) = body.secret.as_ref()
+        && !is_valid_user_secret(secret)
+    {
         return Err(ApiFailure::bad_request(
             "secret must be exactly 32 hex characters",
         ));
     }
-    if let Some(ad_tag) = body.user_ad_tag.as_ref() && !is_valid_ad_tag(ad_tag) {
+    if let Some(ad_tag) = body.user_ad_tag.as_ref()
+        && !is_valid_ad_tag(ad_tag)
+    {
         return Err(ApiFailure::bad_request(
             "user_ad_tag must be exactly 32 hex characters",
         ));
@@ -162,10 +209,14 @@ pub(super) async fn patch_user(
         cfg.access.user_ad_tags.insert(user.to_string(), ad_tag);
     }
     if let Some(limit) = body.max_tcp_conns {
-        cfg.access.user_max_tcp_conns.insert(user.to_string(), limit);
+        cfg.access
+            .user_max_tcp_conns
+            .insert(user.to_string(), limit);
     }
     if let Some(expiration) = expiration {
-        cfg.access.user_expirations.insert(user.to_string(), expiration);
+        cfg.access
+            .user_expirations
+            .insert(user.to_string(), expiration);
     }
     if let Some(quota) = body.data_quota_bytes {
         cfg.access.user_data_quota.insert(user.to_string(), quota);
@@ -173,7 +224,9 @@ pub(super) async fn patch_user(
 
     let mut updated_limit = None;
     if let Some(limit) = body.max_unique_ips {
-        cfg.access.user_max_unique_ips.insert(user.to_string(), limit);
+        cfg.access
+            .user_max_unique_ips
+            .insert(user.to_string(), limit);
         updated_limit = Some(limit);
     }
 
@@ -185,12 +238,14 @@ pub(super) async fn patch_user(
     if let Some(limit) = updated_limit {
         shared.ip_tracker.set_user_limit(user, limit).await;
     }
+    let (detected_ip_v4, detected_ip_v6) = shared.detected_link_ips();
     let users = users_from_config(
         &cfg,
         &shared.stats,
         &shared.ip_tracker,
-        shared.startup_detected_ip_v4,
-        shared.startup_detected_ip_v6,
+        detected_ip_v4,
+        detected_ip_v6,
+        None,
     )
     .await;
     let user_info = users
@@ -229,15 +284,26 @@ pub(super) async fn rotate_secret(
     cfg.access.users.insert(user.to_string(), secret.clone());
     cfg.validate()
         .map_err(|e| ApiFailure::bad_request(format!("config validation failed: {}", e)))?;
-    let revision = save_config_to_disk(&shared.config_path, &cfg).await?;
+    let touched_sections = [
+        AccessSection::Users,
+        AccessSection::UserAdTags,
+        AccessSection::UserMaxTcpConns,
+        AccessSection::UserExpirations,
+        AccessSection::UserDataQuota,
+        AccessSection::UserMaxUniqueIps,
+    ];
+    let revision =
+        save_access_sections_to_disk(&shared.config_path, &cfg, &touched_sections).await?;
     drop(_guard);
 
+    let (detected_ip_v4, detected_ip_v6) = shared.detected_link_ips();
     let users = users_from_config(
         &cfg,
         &shared.stats,
         &shared.ip_tracker,
-        shared.startup_detected_ip_v4,
-        shared.startup_detected_ip_v6,
+        detected_ip_v4,
+        detected_ip_v6,
+        None,
     )
     .await;
     let user_info = users
@@ -287,7 +353,16 @@ pub(super) async fn delete_user(
 
     cfg.validate()
         .map_err(|e| ApiFailure::bad_request(format!("config validation failed: {}", e)))?;
-    let revision = save_config_to_disk(&shared.config_path, &cfg).await?;
+    let touched_sections = [
+        AccessSection::Users,
+        AccessSection::UserAdTags,
+        AccessSection::UserMaxTcpConns,
+        AccessSection::UserExpirations,
+        AccessSection::UserDataQuota,
+        AccessSection::UserMaxUniqueIps,
+    ];
+    let revision =
+        save_access_sections_to_disk(&shared.config_path, &cfg, &touched_sections).await?;
     drop(_guard);
     shared.ip_tracker.remove_user_limit(user).await;
     shared.ip_tracker.clear_user_ips(user).await;
@@ -301,6 +376,7 @@ pub(super) async fn users_from_config(
     ip_tracker: &UserIpTracker,
     startup_detected_ip_v4: Option<IpAddr>,
     startup_detected_ip_v6: Option<IpAddr>,
+    runtime_cfg: Option<&ProxyConfig>,
 ) -> Vec<UserInfo> {
     let mut names = cfg.access.users.keys().cloned().collect::<Vec<_>>();
     names.sort();
@@ -322,12 +398,7 @@ pub(super) async fn users_from_config(
             .users
             .get(&username)
             .map(|secret| {
-                build_user_links(
-                    cfg,
-                    secret,
-                    startup_detected_ip_v4,
-                    startup_detected_ip_v6,
-                )
+                build_user_links(cfg, secret, startup_detected_ip_v4, startup_detected_ip_v6)
             })
             .unwrap_or(UserLinks {
                 classic: Vec::new(),
@@ -335,15 +406,32 @@ pub(super) async fn users_from_config(
                 tls: Vec::new(),
             });
         users.push(UserInfo {
+            in_runtime: runtime_cfg
+                .map(|runtime| runtime.access.users.contains_key(&username))
+                .unwrap_or(false),
             user_ad_tag: cfg.access.user_ad_tags.get(&username).cloned(),
-            max_tcp_conns: cfg.access.user_max_tcp_conns.get(&username).copied(),
+            max_tcp_conns: cfg
+                .access
+                .user_max_tcp_conns
+                .get(&username)
+                .copied()
+                .filter(|limit| *limit > 0)
+                .or((cfg.access.user_max_tcp_conns_global_each > 0)
+                    .then_some(cfg.access.user_max_tcp_conns_global_each)),
             expiration_rfc3339: cfg
                 .access
                 .user_expirations
                 .get(&username)
                 .map(chrono::DateTime::<chrono::Utc>::to_rfc3339),
             data_quota_bytes: cfg.access.user_data_quota.get(&username).copied(),
-            max_unique_ips: cfg.access.user_max_unique_ips.get(&username).copied(),
+            max_unique_ips: cfg
+                .access
+                .user_max_unique_ips
+                .get(&username)
+                .copied()
+                .filter(|limit| *limit > 0)
+                .or((cfg.access.user_max_unique_ips_global_each > 0)
+                    .then_some(cfg.access.user_max_unique_ips_global_each)),
             current_connections: stats.get_user_curr_connects(&username),
             active_unique_ips: active_ip_list.len(),
             active_unique_ips_list: active_ip_list,
@@ -418,17 +506,6 @@ fn resolve_link_hosts(
         return vec![host.to_string()];
     }
 
-    let mut startup_hosts = Vec::new();
-    if let Some(ip) = startup_detected_ip_v4 {
-        push_unique_host(&mut startup_hosts, &ip.to_string());
-    }
-    if let Some(ip) = startup_detected_ip_v6 {
-        push_unique_host(&mut startup_hosts, &ip.to_string());
-    }
-    if !startup_hosts.is_empty() {
-        return startup_hosts;
-    }
-
     let mut hosts = Vec::new();
     for listener in &cfg.server.listeners {
         if let Some(host) = listener
@@ -440,27 +517,47 @@ fn resolve_link_hosts(
             push_unique_host(&mut hosts, host);
             continue;
         }
-        if let Some(ip) = listener.announce_ip {
-            if !ip.is_unspecified() {
+        if let Some(ip) = listener.announce_ip
+            && !ip.is_unspecified()
+        {
             push_unique_host(&mut hosts, &ip.to_string());
+            continue;
+        }
+        if listener.ip.is_unspecified() {
+            let detected_ip = if listener.ip.is_ipv4() {
+                startup_detected_ip_v4
+            } else {
+                startup_detected_ip_v6
+            };
+            if let Some(ip) = detected_ip {
+                push_unique_host(&mut hosts, &ip.to_string());
+            } else {
+                push_unique_host(&mut hosts, &listener.ip.to_string());
             }
             continue;
         }
-        if !listener.ip.is_unspecified() {
         push_unique_host(&mut hosts, &listener.ip.to_string());
     }
+
+    if !hosts.is_empty() {
+        return hosts;
+    }
+
+    if let Some(ip) = startup_detected_ip_v4.or(startup_detected_ip_v6) {
+        return vec![ip.to_string()];
     }
 
-    if hosts.is_empty() {
     if let Some(host) = cfg.server.listen_addr_ipv4.as_deref() {
         push_host_from_legacy_listen(&mut hosts, host);
     }
     if let Some(host) = cfg.server.listen_addr_ipv6.as_deref() {
         push_host_from_legacy_listen(&mut hosts, host);
     }
+    if !hosts.is_empty() {
+        return hosts;
     }
 
-    hosts
+    vec!["UNKNOWN".to_string()]
 }
 
 fn push_host_from_legacy_listen(hosts: &mut Vec<String>, raw: &str) {
@@ -497,3 +594,94 @@ fn resolve_tls_domains(cfg: &ProxyConfig) -> Vec<&str> {
     }
     domains
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::ip_tracker::UserIpTracker;
+    use crate::stats::Stats;
+
+    #[tokio::test]
+    async fn users_from_config_reports_effective_tcp_limit_with_global_fallback() {
+        let mut cfg = ProxyConfig::default();
+        cfg.access.users.insert(
+            "alice".to_string(),
+            "0123456789abcdef0123456789abcdef".to_string(),
+        );
+        cfg.access.user_max_tcp_conns_global_each = 7;
+
+        let stats = Stats::new();
+        let tracker = UserIpTracker::new();
+
+        let users = users_from_config(&cfg, &stats, &tracker, None, None, None).await;
+        let alice = users
+            .iter()
+            .find(|entry| entry.username == "alice")
+            .expect("alice must be present");
+        assert!(!alice.in_runtime);
+        assert_eq!(alice.max_tcp_conns, Some(7));
+
+        cfg.access.user_max_tcp_conns.insert("alice".to_string(), 5);
+        let users = users_from_config(&cfg, &stats, &tracker, None, None, None).await;
+        let alice = users
+            .iter()
+            .find(|entry| entry.username == "alice")
+            .expect("alice must be present");
+        assert!(!alice.in_runtime);
+        assert_eq!(alice.max_tcp_conns, Some(5));
+
+        cfg.access.user_max_tcp_conns.insert("alice".to_string(), 0);
+        let users = users_from_config(&cfg, &stats, &tracker, None, None, None).await;
+        let alice = users
+            .iter()
+            .find(|entry| entry.username == "alice")
+            .expect("alice must be present");
+        assert!(!alice.in_runtime);
+        assert_eq!(alice.max_tcp_conns, Some(7));
+
+        cfg.access.user_max_tcp_conns_global_each = 0;
+        let users = users_from_config(&cfg, &stats, &tracker, None, None, None).await;
+        let alice = users
+            .iter()
+            .find(|entry| entry.username == "alice")
+            .expect("alice must be present");
+        assert!(!alice.in_runtime);
+        assert_eq!(alice.max_tcp_conns, None);
+    }
+
+    #[tokio::test]
+    async fn users_from_config_marks_runtime_membership_when_snapshot_is_provided() {
+        let mut disk_cfg = ProxyConfig::default();
+        disk_cfg.access.users.insert(
+            "alice".to_string(),
+            "0123456789abcdef0123456789abcdef".to_string(),
+        );
+        disk_cfg.access.users.insert(
+            "bob".to_string(),
+            "fedcba9876543210fedcba9876543210".to_string(),
+        );
+
+        let mut runtime_cfg = ProxyConfig::default();
+        runtime_cfg.access.users.insert(
+            "alice".to_string(),
+            "0123456789abcdef0123456789abcdef".to_string(),
+        );
+
+        let stats = Stats::new();
+        let tracker = UserIpTracker::new();
+        let users =
+            users_from_config(&disk_cfg, &stats, &tracker, None, None, Some(&runtime_cfg)).await;
+
+        let alice = users
+            .iter()
+            .find(|entry| entry.username == "alice")
+            .expect("alice must be present");
+        let bob = users
+            .iter()
+            .find(|entry| entry.username == "bob")
+            .expect("bob must be present");
+
+        assert!(alice.in_runtime);
+        assert!(!bob.in_runtime);
+    }
+}

src/cli.rs

@@ -1,11 +1,270 @@
-//! CLI commands: --init (fire-and-forget setup)
+//! CLI commands: --init (fire-and-forget setup), daemon options, subcommands
+//!
+//! Subcommands:
+//! - `start [OPTIONS] [config.toml]` - Start the daemon
+//! - `stop [--pid-file PATH]` - Stop a running daemon
+//! - `reload [--pid-file PATH]` - Reload configuration (SIGHUP)
+//! - `status [--pid-file PATH]` - Check daemon status
+//! - `run [OPTIONS] [config.toml]` - Run in foreground (default behavior)
 
+use rand::RngExt;
 use std::fs;
 use std::path::{Path, PathBuf};
 use std::process::Command;
-use rand::Rng;
+
+#[cfg(unix)]
+use crate::daemon::{self, DEFAULT_PID_FILE, DaemonOptions};
+
+/// CLI subcommand to execute.
+#[derive(Debug, Clone, PartialEq, Eq)]
+pub enum Subcommand {
+    /// Run the proxy (default, or explicit `run` subcommand).
+    Run,
+    /// Start as daemon (`start` subcommand).
+    Start,
+    /// Stop a running daemon (`stop` subcommand).
+    Stop,
+    /// Reload configuration (`reload` subcommand).
+    Reload,
+    /// Check daemon status (`status` subcommand).
+    Status,
+    /// Fire-and-forget setup (`--init`).
+    Init,
+}
+
+/// Parsed subcommand with its options.
+#[derive(Debug)]
+pub struct ParsedCommand {
+    pub subcommand: Subcommand,
+    pub pid_file: PathBuf,
+    pub config_path: String,
+    #[cfg(unix)]
+    pub daemon_opts: DaemonOptions,
+    pub init_opts: Option<InitOptions>,
+}
+
+impl Default for ParsedCommand {
+    fn default() -> Self {
+        Self {
+            subcommand: Subcommand::Run,
+            #[cfg(unix)]
+            pid_file: PathBuf::from(DEFAULT_PID_FILE),
+            #[cfg(not(unix))]
+            pid_file: PathBuf::from("/var/run/telemt.pid"),
+            config_path: "config.toml".to_string(),
+            #[cfg(unix)]
+            daemon_opts: DaemonOptions::default(),
+            init_opts: None,
+        }
+    }
+}
+
+/// Parse CLI arguments into a command structure.
+pub fn parse_command(args: &[String]) -> ParsedCommand {
+    let mut cmd = ParsedCommand::default();
+
+    // Check for --init first (legacy form)
+    if args.iter().any(|a| a == "--init") {
+        cmd.subcommand = Subcommand::Init;
+        cmd.init_opts = parse_init_args(args);
+        return cmd;
+    }
+
+    // Check for subcommand as first argument
+    if let Some(first) = args.first() {
+        match first.as_str() {
+            "start" => {
+                cmd.subcommand = Subcommand::Start;
+                #[cfg(unix)]
+                {
+                    cmd.daemon_opts = parse_daemon_args(args);
+                    // Force daemonize for start command
+                    cmd.daemon_opts.daemonize = true;
+                }
+            }
+            "stop" => {
+                cmd.subcommand = Subcommand::Stop;
+            }
+            "reload" => {
+                cmd.subcommand = Subcommand::Reload;
+            }
+            "status" => {
+                cmd.subcommand = Subcommand::Status;
+            }
+            "run" => {
+                cmd.subcommand = Subcommand::Run;
+                #[cfg(unix)]
+                {
+                    cmd.daemon_opts = parse_daemon_args(args);
+                }
+            }
+            _ => {
+                // No subcommand, default to Run
+                #[cfg(unix)]
+                {
+                    cmd.daemon_opts = parse_daemon_args(args);
+                }
+            }
+        }
+    }
+
+    // Parse remaining options
+    let mut i = 0;
+    while i < args.len() {
+        match args[i].as_str() {
+            // Skip subcommand names
+            "start" | "stop" | "reload" | "status" | "run" => {}
+            // PID file option (for stop/reload/status)
+            "--pid-file" => {
+                i += 1;
+                if i < args.len() {
+                    cmd.pid_file = PathBuf::from(&args[i]);
+                    #[cfg(unix)]
+                    {
+                        cmd.daemon_opts.pid_file = Some(cmd.pid_file.clone());
+                    }
+                }
+            }
+            s if s.starts_with("--pid-file=") => {
+                cmd.pid_file = PathBuf::from(s.trim_start_matches("--pid-file="));
+                #[cfg(unix)]
+                {
+                    cmd.daemon_opts.pid_file = Some(cmd.pid_file.clone());
+                }
+            }
+            // Config path (positional, non-flag argument)
+            s if !s.starts_with('-') => {
+                cmd.config_path = s.to_string();
+            }
+            _ => {}
+        }
+        i += 1;
+    }
+
+    cmd
+}
+
+/// Execute a subcommand that doesn't require starting the server.
+/// Returns `Some(exit_code)` if the command was handled, `None` if server should start.
+#[cfg(unix)]
+pub fn execute_subcommand(cmd: &ParsedCommand) -> Option<i32> {
+    match cmd.subcommand {
+        Subcommand::Stop => Some(cmd_stop(&cmd.pid_file)),
+        Subcommand::Reload => Some(cmd_reload(&cmd.pid_file)),
+        Subcommand::Status => Some(cmd_status(&cmd.pid_file)),
+        Subcommand::Init => {
+            if let Some(opts) = cmd.init_opts.clone() {
+                match run_init(opts) {
+                    Ok(()) => Some(0),
+                    Err(e) => {
+                        eprintln!("[telemt] Init failed: {}", e);
+                        Some(1)
+                    }
+                }
+            } else {
+                Some(1)
+            }
+        }
+        // Run and Start need the server
+        Subcommand::Run | Subcommand::Start => None,
+    }
+}
+
+#[cfg(not(unix))]
+pub fn execute_subcommand(cmd: &ParsedCommand) -> Option<i32> {
+    match cmd.subcommand {
+        Subcommand::Stop | Subcommand::Reload | Subcommand::Status => {
+            eprintln!("[telemt] Subcommand not supported on this platform");
+            Some(1)
+        }
+        Subcommand::Init => {
+            if let Some(opts) = cmd.init_opts.clone() {
+                match run_init(opts) {
+                    Ok(()) => Some(0),
+                    Err(e) => {
+                        eprintln!("[telemt] Init failed: {}", e);
+                        Some(1)
+                    }
+                }
+            } else {
+                Some(1)
+            }
+        }
+        Subcommand::Run | Subcommand::Start => None,
+    }
+}
+
+/// Stop command: send SIGTERM to the running daemon.
+#[cfg(unix)]
+fn cmd_stop(pid_file: &Path) -> i32 {
+    use nix::sys::signal::Signal;
+
+    println!("Stopping telemt daemon...");
+
+    match daemon::signal_pid_file(pid_file, Signal::SIGTERM) {
+        Ok(()) => {
+            println!("Stop signal sent successfully");
+
+            // Wait for process to exit (up to 10 seconds)
+            for _ in 0..20 {
+                std::thread::sleep(std::time::Duration::from_millis(500));
+                if let daemon::DaemonStatus::NotRunning = daemon::check_status(pid_file) {
+                    println!("Daemon stopped");
+                    return 0;
+                }
+            }
+            println!("Daemon may still be shutting down");
+            0
+        }
+        Err(e) => {
+            eprintln!("Failed to stop daemon: {}", e);
+            1
+        }
+    }
+}
+
+/// Reload command: send SIGHUP to trigger config reload.
+#[cfg(unix)]
+fn cmd_reload(pid_file: &Path) -> i32 {
+    use nix::sys::signal::Signal;
+
+    println!("Reloading telemt configuration...");
+
+    match daemon::signal_pid_file(pid_file, Signal::SIGHUP) {
+        Ok(()) => {
+            println!("Reload signal sent successfully");
+            0
+        }
+        Err(e) => {
+            eprintln!("Failed to reload daemon: {}", e);
+            1
+        }
+    }
+}
+
+/// Status command: check if daemon is running.
+#[cfg(unix)]
+fn cmd_status(pid_file: &Path) -> i32 {
+    match daemon::check_status(pid_file) {
+        daemon::DaemonStatus::Running(pid) => {
+            println!("telemt is running (pid {})", pid);
+            0
+        }
+        daemon::DaemonStatus::Stale(pid) => {
+            println!("telemt is not running (stale pid file, was pid {})", pid);
+            // Clean up stale PID file
+            let _ = std::fs::remove_file(pid_file);
+            1
+        }
+        daemon::DaemonStatus::NotRunning => {
+            println!("telemt is not running");
+            1
+        }
+    }
+}
 
 /// Options for the init command
+#[derive(Debug, Clone)]
 pub struct InitOptions {
     pub port: u16,
     pub domain: String,
@@ -15,6 +274,64 @@ pub struct InitOptions {
     pub no_start: bool,
 }
 
+/// Parse daemon-related options from CLI args.
+#[cfg(unix)]
+pub fn parse_daemon_args(args: &[String]) -> DaemonOptions {
+    let mut opts = DaemonOptions::default();
+    let mut i = 0;
+
+    while i < args.len() {
+        match args[i].as_str() {
+            "--daemon" | "-d" => {
+                opts.daemonize = true;
+            }
+            "--foreground" | "-f" => {
+                opts.foreground = true;
+            }
+            "--pid-file" => {
+                i += 1;
+                if i < args.len() {
+                    opts.pid_file = Some(PathBuf::from(&args[i]));
+                }
+            }
+            s if s.starts_with("--pid-file=") => {
+                opts.pid_file = Some(PathBuf::from(s.trim_start_matches("--pid-file=")));
+            }
+            "--run-as-user" => {
+                i += 1;
+                if i < args.len() {
+                    opts.user = Some(args[i].clone());
+                }
+            }
+            s if s.starts_with("--run-as-user=") => {
+                opts.user = Some(s.trim_start_matches("--run-as-user=").to_string());
+            }
+            "--run-as-group" => {
+                i += 1;
+                if i < args.len() {
+                    opts.group = Some(args[i].clone());
+                }
+            }
+            s if s.starts_with("--run-as-group=") => {
+                opts.group = Some(s.trim_start_matches("--run-as-group=").to_string());
+            }
+            "--working-dir" => {
+                i += 1;
+                if i < args.len() {
+                    opts.working_dir = Some(PathBuf::from(&args[i]));
+                }
+            }
+            s if s.starts_with("--working-dir=") => {
+                opts.working_dir = Some(PathBuf::from(s.trim_start_matches("--working-dir=")));
+            }
+            _ => {}
+        }
+        i += 1;
+    }
+
+    opts
+}
+
 impl Default for InitOptions {
     fn default() -> Self {
         Self {
@@ -84,10 +401,16 @@ pub fn parse_init_args(args: &[String]) -> Option<InitOptions> {
 
 /// Run the fire-and-forget setup.
 pub fn run_init(opts: InitOptions) -> Result<(), Box<dyn std::error::Error>> {
+    use crate::service::{self, InitSystem, ServiceOptions};
+
     eprintln!("[telemt] Fire-and-forget setup");
     eprintln!();
 
-    // 1. Generate or validate secret
+    // 1. Detect init system
+    let init_system = service::detect_init_system();
+    eprintln!("[+] Detected init system: {}", init_system);
+
+    // 2. Generate or validate secret
     let secret = match opts.secret {
         Some(s) => {
             if s.len() != 32 || !s.chars().all(|c| c.is_ascii_hexdigit()) {
@@ -104,50 +427,74 @@ pub fn run_init(opts: InitOptions) -> Result<(), Box<dyn std::error::Error>> {
     eprintln!("[+] Port:   {}", opts.port);
     eprintln!("[+] Domain: {}", opts.domain);
 
-    // 2. Create config directory
+    // 3. Create config directory
     fs::create_dir_all(&opts.config_dir)?;
     let config_path = opts.config_dir.join("config.toml");
 
-    // 3. Write config
+    // 4. Write config
     let config_content = generate_config(&opts.username, &secret, opts.port, &opts.domain);
     fs::write(&config_path, &config_content)?;
     eprintln!("[+] Config written to {}", config_path.display());
 
-    // 4. Write systemd unit
-    let exe_path = std::env::current_exe()
-        .unwrap_or_else(|_| PathBuf::from("/usr/local/bin/telemt"));
+    // 5. Generate and write service file
+    let exe_path =
+        std::env::current_exe().unwrap_or_else(|_| PathBuf::from("/usr/local/bin/telemt"));
 
-    let unit_path = Path::new("/etc/systemd/system/telemt.service");
-    let unit_content = generate_systemd_unit(&exe_path, &config_path);
+    let service_opts = ServiceOptions {
+        exe_path: &exe_path,
+        config_path: &config_path,
+        user: None, // Let systemd/init handle user
+        group: None,
+        pid_file: "/var/run/telemt.pid",
+        working_dir: Some("/var/lib/telemt"),
+        description: "Telemt MTProxy - Telegram MTProto Proxy",
+    };
 
-    match fs::write(unit_path, &unit_content) {
+    let service_path = service::service_file_path(init_system);
+    let service_content = service::generate_service_file(init_system, &service_opts);
+
+    // Ensure parent directory exists
+    if let Some(parent) = Path::new(service_path).parent() {
+        let _ = fs::create_dir_all(parent);
+    }
+
+    match fs::write(service_path, &service_content) {
         Ok(()) => {
-            eprintln!("[+] Systemd unit written to {}", unit_path.display());
+            eprintln!("[+] Service file written to {}", service_path);
+
+            // Make script executable for OpenRC/FreeBSD
+            #[cfg(unix)]
+            if init_system == InitSystem::OpenRC || init_system == InitSystem::FreeBSDRc {
+                use std::os::unix::fs::PermissionsExt;
+                let mut perms = fs::metadata(service_path)?.permissions();
+                perms.set_mode(0o755);
+                fs::set_permissions(service_path, perms)?;
+            }
         }
         Err(e) => {
-            eprintln!("[!] Cannot write systemd unit (run as root?): {}", e);
-            eprintln!("[!] Manual unit file content:");
-            eprintln!("{}", unit_content);
+            eprintln!("[!] Cannot write service file (run as root?): {}", e);
+            eprintln!("[!] Manual service file content:");
+            eprintln!("{}", service_content);
 
-            // Still print links and config
+            // Still print links and installation instructions
+            eprintln!();
+            eprintln!("{}", service::installation_instructions(init_system));
             print_links(&opts.username, &secret, opts.port, &opts.domain);
             return Ok(());
         }
     }
 
-    // 5. Reload systemd
+    // 6. Install and enable service based on init system
+    match init_system {
+        InitSystem::Systemd => {
             run_cmd("systemctl", &["daemon-reload"]);
-    
-    // 6. Enable service
             run_cmd("systemctl", &["enable", "telemt.service"]);
             eprintln!("[+] Service enabled");
 
-    // 7. Start service (unless --no-start)
             if !opts.no_start {
                 run_cmd("systemctl", &["start", "telemt.service"]);
                 eprintln!("[+] Service started");
 
-        // Brief delay then check status
                 std::thread::sleep(std::time::Duration::from_secs(1));
                 let status = Command::new("systemctl")
                     .args(["is-active", "telemt.service"])
@@ -166,10 +513,40 @@ pub fn run_init(opts: InitOptions) -> Result<(), Box<dyn std::error::Error>> {
                 eprintln!("[+] Service not started (--no-start)");
                 eprintln!("[+] Start manually: systemctl start telemt.service");
             }
+        }
+        InitSystem::OpenRC => {
+            run_cmd("rc-update", &["add", "telemt", "default"]);
+            eprintln!("[+] Service enabled");
+
+            if !opts.no_start {
+                run_cmd("rc-service", &["telemt", "start"]);
+                eprintln!("[+] Service started");
+            } else {
+                eprintln!("[+] Service not started (--no-start)");
+                eprintln!("[+] Start manually: rc-service telemt start");
+            }
+        }
+        InitSystem::FreeBSDRc => {
+            run_cmd("sysrc", &["telemt_enable=YES"]);
+            eprintln!("[+] Service enabled");
+
+            if !opts.no_start {
+                run_cmd("service", &["telemt", "start"]);
+                eprintln!("[+] Service started");
+            } else {
+                eprintln!("[+] Service not started (--no-start)");
+                eprintln!("[+] Start manually: service telemt start");
+            }
+        }
+        InitSystem::Unknown => {
+            eprintln!("[!] Unknown init system - service file written but not installed");
+            eprintln!("[!] You may need to install it manually");
+        }
+    }
 
     eprintln!();
 
-    // 8. Print links
+    // 7. Print links
     print_links(&opts.username, &secret, opts.port, &opts.domain);
 
     Ok(())
@@ -183,7 +560,7 @@ fn generate_secret() -> String {
 
 fn generate_config(username: &str, secret: &str, port: u16, domain: &str) -> String {
     format!(
-r#"# Telemt MTProxy — auto-generated config
+        r#"# Telemt MTProxy — auto-generated config
 # Re-run `telemt --init` to regenerate
 
 show_link = ["{username}"]
@@ -198,8 +575,16 @@ desync_all_full = false
 update_every = 43200
 hardswap = false
 me_pool_drain_ttl_secs = 90
+me_instadrain = false
+me_pool_drain_threshold = 32
+me_pool_drain_soft_evict_grace_secs = 10
+me_pool_drain_soft_evict_per_writer = 2
+me_pool_drain_soft_evict_budget_per_core = 16
+me_pool_drain_soft_evict_cooldown_ms = 1000
+me_bind_stale_mode = "never"
 me_pool_min_fresh_ratio = 0.8
-me_reinit_drain_timeout_secs = 120
+me_reinit_drain_timeout_secs = 90
+tg_connect = 10
 
 [network]
 ipv4 = true
@@ -225,8 +610,8 @@ ip = "0.0.0.0"
 ip = "::"
 
 [timeouts]
-client_handshake = 15
-tg_connect = 10
+client_first_byte_idle_secs = 300
+client_handshake = 60
 client_keepalive = 60
 client_ack = 300
 
@@ -238,8 +623,9 @@ fake_cert_len = 2048
 tls_full_cert_ttl_secs = 90
 
 [access]
+user_max_tcp_conns_global_each = 0
 replay_check_len = 65536
-replay_window_secs = 1800
+replay_window_secs = 120
 ignore_time_skew = false
 
 [access.users]
@@ -257,35 +643,6 @@ weight = 10
     )
 }
 
-fn generate_systemd_unit(exe_path: &Path, config_path: &Path) -> String {
-    format!(
-r#"[Unit]
-Description=Telemt MTProxy
-Documentation=https://github.com/nicepkg/telemt
-After=network-online.target
-Wants=network-online.target
-
-[Service]
-Type=simple
-ExecStart={exe} {config}
-Restart=always
-RestartSec=5
-LimitNOFILE=65535
-# Security hardening
-NoNewPrivileges=true
-ProtectSystem=strict
-ProtectHome=true
-ReadWritePaths=/etc/telemt
-PrivateTmp=true
-
-[Install]
-WantedBy=multi-user.target
-"#,
-        exe = exe_path.display(),
-        config = config_path.display(),
-    )
-}
-
 fn run_cmd(cmd: &str, args: &[&str]) {
     match Command::new(cmd).args(args).output() {
         Ok(output) => {
@@ -305,8 +662,10 @@ fn print_links(username: &str, secret: &str, port: u16, domain: &str) {
 
     println!("=== Proxy Links ===");
     println!("[{}]", username);
-    println!("  EE-TLS:  tg://proxy?server=YOUR_SERVER_IP&port={}&secret=ee{}{}", 
-        port, secret, domain_hex);
+    println!(
+        "  EE-TLS:  tg://proxy?server=YOUR_SERVER_IP&port={}&secret=ee{}{}",
+        port, secret, domain_hex
+    );
     println!();
     println!("Replace YOUR_SERVER_IP with your server's public IP.");
     println!("The proxy will auto-detect and display the correct link on startup.");

src/config/defaults.rs

@@ -1,6 +1,6 @@
-use std::collections::HashMap;
 use ipnetwork::IpNetwork;
 use serde::Deserialize;
+use std::collections::HashMap;
 
 // Helper defaults kept private to the config module.
 const DEFAULT_NETWORK_IPV6: Option<bool> = Some(false);
@@ -11,10 +11,50 @@ const DEFAULT_ME_RECONNECT_FAST_RETRY_COUNT: u32 = 16;
 const DEFAULT_ME_SINGLE_ENDPOINT_SHADOW_WRITERS: u8 = 2;
 const DEFAULT_ME_ADAPTIVE_FLOOR_IDLE_SECS: u64 = 90;
 const DEFAULT_ME_ADAPTIVE_FLOOR_MIN_WRITERS_SINGLE_ENDPOINT: u8 = 1;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MIN_WRITERS_MULTI_ENDPOINT: u8 = 1;
 const DEFAULT_ME_ADAPTIVE_FLOOR_RECOVER_GRACE_SECS: u64 = 180;
+const DEFAULT_ME_ADAPTIVE_FLOOR_WRITERS_PER_CORE_TOTAL: u16 = 48;
+const DEFAULT_ME_ADAPTIVE_FLOOR_CPU_CORES_OVERRIDE: u16 = 0;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_EXTRA_WRITERS_SINGLE_PER_CORE: u16 = 1;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_EXTRA_WRITERS_MULTI_PER_CORE: u16 = 2;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_ACTIVE_WRITERS_PER_CORE: u16 = 64;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_WARM_WRITERS_PER_CORE: u16 = 64;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_ACTIVE_WRITERS_GLOBAL: u32 = 256;
+const DEFAULT_ME_ADAPTIVE_FLOOR_MAX_WARM_WRITERS_GLOBAL: u32 = 256;
+const DEFAULT_ME_WRITER_CMD_CHANNEL_CAPACITY: usize = 4096;
+const DEFAULT_ME_ROUTE_CHANNEL_CAPACITY: usize = 768;
+const DEFAULT_ME_C2ME_CHANNEL_CAPACITY: usize = 1024;
+const DEFAULT_ME_READER_ROUTE_DATA_WAIT_MS: u64 = 2;
+const DEFAULT_ME_D2C_FLUSH_BATCH_MAX_FRAMES: usize = 32;
+const DEFAULT_ME_D2C_FLUSH_BATCH_MAX_BYTES: usize = 128 * 1024;
+const DEFAULT_ME_D2C_FLUSH_BATCH_MAX_DELAY_US: u64 = 500;
+const DEFAULT_ME_D2C_ACK_FLUSH_IMMEDIATE: bool = true;
+const DEFAULT_ME_QUOTA_SOFT_OVERSHOOT_BYTES: u64 = 64 * 1024;
+const DEFAULT_ME_D2C_FRAME_BUF_SHRINK_THRESHOLD_BYTES: usize = 256 * 1024;
+const DEFAULT_DIRECT_RELAY_COPY_BUF_C2S_BYTES: usize = 64 * 1024;
+const DEFAULT_DIRECT_RELAY_COPY_BUF_S2C_BYTES: usize = 256 * 1024;
+const DEFAULT_ME_WRITER_PICK_SAMPLE_SIZE: u8 = 3;
+const DEFAULT_ME_HEALTH_INTERVAL_MS_UNHEALTHY: u64 = 1000;
+const DEFAULT_ME_HEALTH_INTERVAL_MS_HEALTHY: u64 = 3000;
+const DEFAULT_ME_ADMISSION_POLL_MS: u64 = 1000;
+const DEFAULT_ME_WARN_RATE_LIMIT_MS: u64 = 5000;
+const DEFAULT_ME_ROUTE_HYBRID_MAX_WAIT_MS: u64 = 3000;
+const DEFAULT_ME_ROUTE_BLOCKING_SEND_TIMEOUT_MS: u64 = 250;
+const DEFAULT_ME_C2ME_SEND_TIMEOUT_MS: u64 = 4000;
+const DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_ENABLED: bool = true;
+const DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_GRACE_SECS: u64 = 10;
+const DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_PER_WRITER: u8 = 2;
+const DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_BUDGET_PER_CORE: u16 = 16;
+const DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_COOLDOWN_MS: u64 = 1000;
 const DEFAULT_USER_MAX_UNIQUE_IPS_WINDOW_SECS: u64 = 30;
+const DEFAULT_ACCEPT_PERMIT_TIMEOUT_MS: u64 = 250;
+const DEFAULT_CONNTRACK_CONTROL_ENABLED: bool = true;
+const DEFAULT_CONNTRACK_PRESSURE_HIGH_WATERMARK_PCT: u8 = 85;
+const DEFAULT_CONNTRACK_PRESSURE_LOW_WATERMARK_PCT: u8 = 70;
+const DEFAULT_CONNTRACK_DELETE_BUDGET_PER_SEC: u64 = 4096;
 const DEFAULT_UPSTREAM_CONNECT_RETRY_ATTEMPTS: u32 = 2;
 const DEFAULT_UPSTREAM_UNHEALTHY_FAIL_THRESHOLD: u32 = 5;
+const DEFAULT_UPSTREAM_CONNECT_BUDGET_MS: u64 = 3000;
 const DEFAULT_LISTEN_ADDR_IPV6: &str = "::";
 const DEFAULT_ACCESS_USER: &str = "default";
 const DEFAULT_ACCESS_SECRET: &str = "00000000000000000000000000000000";
@@ -31,6 +71,26 @@ pub(crate) fn default_tls_domain() -> String {
     "petrovich.ru".to_string()
 }
 
+pub(crate) fn default_tls_fetch_scope() -> String {
+    String::new()
+}
+
+pub(crate) fn default_tls_fetch_attempt_timeout_ms() -> u64 {
+    5_000
+}
+
+pub(crate) fn default_tls_fetch_total_budget_ms() -> u64 {
+    15_000
+}
+
+pub(crate) fn default_tls_fetch_strict_route() -> bool {
+    true
+}
+
+pub(crate) fn default_tls_fetch_profile_cache_ttl_secs() -> u64 {
+    600
+}
+
 pub(crate) fn default_mask_port() -> u16 {
     443
 }
@@ -40,7 +100,7 @@ pub(crate) fn default_fake_cert_len() -> usize {
 }
 
 pub(crate) fn default_tls_front_dir() -> String {
-    "tlsfront".to_string()
+    "/etc/telemt/tlsfront".to_string()
 }
 
 pub(crate) fn default_replay_check_len() -> usize {
@@ -48,10 +108,32 @@ pub(crate) fn default_replay_check_len() -> usize {
 }
 
 pub(crate) fn default_replay_window_secs() -> u64 {
-    1800
+    // Keep replay cache TTL tight by default to reduce replay surface.
+    // Deployments with higher RTT or longer reconnect jitter can override this in config.
+    120
 }
 
 pub(crate) fn default_handshake_timeout() -> u64 {
+    60
+}
+
+pub(crate) fn default_client_first_byte_idle_secs() -> u64 {
+    300
+}
+
+pub(crate) fn default_relay_idle_policy_v2_enabled() -> bool {
+    true
+}
+
+pub(crate) fn default_relay_client_idle_soft_secs() -> u64 {
+    120
+}
+
+pub(crate) fn default_relay_client_idle_hard_secs() -> u64 {
+    360
+}
+
+pub(crate) fn default_relay_idle_grace_after_downstream_activity_secs() -> u64 {
     30
 }
 
@@ -60,11 +142,11 @@ pub(crate) fn default_connect_timeout() -> u64 {
 }
 
 pub(crate) fn default_keepalive() -> u64 {
-    60
+    15
 }
 
 pub(crate) fn default_ack_timeout() -> u64 {
-    300
+    90
 }
 pub(crate) fn default_me_one_retry() -> u8 {
     12
@@ -87,18 +169,15 @@ pub(crate) fn default_weight() -> u16 {
 }
 
 pub(crate) fn default_metrics_whitelist() -> Vec<IpNetwork> {
-    vec![
-        "127.0.0.1/32".parse().unwrap(),
-        "::1/128".parse().unwrap(),
-    ]
+    vec!["127.0.0.1/32".parse().unwrap(), "::1/128".parse().unwrap()]
 }
 
 pub(crate) fn default_api_listen() -> String {
-    "127.0.0.1:9091".to_string()
+    "0.0.0.0:9091".to_string()
 }
 
 pub(crate) fn default_api_whitelist() -> Vec<IpNetwork> {
-    default_metrics_whitelist()
+    vec!["127.0.0.0/8".parse().unwrap()]
 }
 
 pub(crate) fn default_api_request_body_limit_bytes() -> usize {
@@ -106,13 +185,62 @@ pub(crate) fn default_api_request_body_limit_bytes() -> usize {
 }
 
 pub(crate) fn default_api_minimal_runtime_enabled() -> bool {
-    false
+    true
 }
 
 pub(crate) fn default_api_minimal_runtime_cache_ttl_ms() -> u64 {
     1000
 }
 
+pub(crate) fn default_api_runtime_edge_enabled() -> bool {
+    false
+}
+pub(crate) fn default_api_runtime_edge_cache_ttl_ms() -> u64 {
+    1000
+}
+pub(crate) fn default_api_runtime_edge_top_n() -> usize {
+    10
+}
+pub(crate) fn default_api_runtime_edge_events_capacity() -> usize {
+    256
+}
+
+pub(crate) fn default_proxy_protocol_header_timeout_ms() -> u64 {
+    500
+}
+
+pub(crate) fn default_proxy_protocol_trusted_cidrs() -> Vec<IpNetwork> {
+    vec!["0.0.0.0/0".parse().unwrap(), "::/0".parse().unwrap()]
+}
+
+pub(crate) fn default_server_max_connections() -> u32 {
+    10_000
+}
+
+pub(crate) fn default_listen_backlog() -> u32 {
+    1024
+}
+
+pub(crate) fn default_accept_permit_timeout_ms() -> u64 {
+    DEFAULT_ACCEPT_PERMIT_TIMEOUT_MS
+}
+
+pub(crate) fn default_conntrack_control_enabled() -> bool {
+    DEFAULT_CONNTRACK_CONTROL_ENABLED
+}
+
+pub(crate) fn default_conntrack_pressure_high_watermark_pct() -> u8 {
+    DEFAULT_CONNTRACK_PRESSURE_HIGH_WATERMARK_PCT
+}
+
+pub(crate) fn default_conntrack_pressure_low_watermark_pct() -> u8 {
+    DEFAULT_CONNTRACK_PRESSURE_LOW_WATERMARK_PCT
+}
+
+pub(crate) fn default_conntrack_delete_budget_per_sec() -> u64 {
+    DEFAULT_CONNTRACK_DELETE_BUDGET_PER_SEC
+}
+
 pub(crate) fn default_prefer_4() -> u8 {
     4
 }
@@ -173,6 +301,10 @@ pub(crate) fn default_me2dc_fallback() -> bool {
     true
 }
 
+pub(crate) fn default_me2dc_fast() -> bool {
+    true
+}
+
 pub(crate) fn default_keepalive_interval() -> u64 {
     8
 }
@@ -237,10 +369,126 @@ pub(crate) fn default_me_adaptive_floor_min_writers_single_endpoint() -> u8 {
     DEFAULT_ME_ADAPTIVE_FLOOR_MIN_WRITERS_SINGLE_ENDPOINT
 }
 
+pub(crate) fn default_me_adaptive_floor_min_writers_multi_endpoint() -> u8 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MIN_WRITERS_MULTI_ENDPOINT
+}
+
 pub(crate) fn default_me_adaptive_floor_recover_grace_secs() -> u64 {
     DEFAULT_ME_ADAPTIVE_FLOOR_RECOVER_GRACE_SECS
 }
 
+pub(crate) fn default_me_adaptive_floor_writers_per_core_total() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_WRITERS_PER_CORE_TOTAL
+}
+
+pub(crate) fn default_me_adaptive_floor_cpu_cores_override() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_CPU_CORES_OVERRIDE
+}
+
+pub(crate) fn default_me_adaptive_floor_max_extra_writers_single_per_core() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_EXTRA_WRITERS_SINGLE_PER_CORE
+}
+
+pub(crate) fn default_me_adaptive_floor_max_extra_writers_multi_per_core() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_EXTRA_WRITERS_MULTI_PER_CORE
+}
+
+pub(crate) fn default_me_adaptive_floor_max_active_writers_per_core() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_ACTIVE_WRITERS_PER_CORE
+}
+
+pub(crate) fn default_me_adaptive_floor_max_warm_writers_per_core() -> u16 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_WARM_WRITERS_PER_CORE
+}
+
+pub(crate) fn default_me_adaptive_floor_max_active_writers_global() -> u32 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_ACTIVE_WRITERS_GLOBAL
+}
+
+pub(crate) fn default_me_adaptive_floor_max_warm_writers_global() -> u32 {
+    DEFAULT_ME_ADAPTIVE_FLOOR_MAX_WARM_WRITERS_GLOBAL
+}
+
+pub(crate) fn default_me_writer_cmd_channel_capacity() -> usize {
+    DEFAULT_ME_WRITER_CMD_CHANNEL_CAPACITY
+}
+
+pub(crate) fn default_me_route_channel_capacity() -> usize {
+    DEFAULT_ME_ROUTE_CHANNEL_CAPACITY
+}
+
+pub(crate) fn default_me_c2me_channel_capacity() -> usize {
+    DEFAULT_ME_C2ME_CHANNEL_CAPACITY
+}
+
+pub(crate) fn default_me_reader_route_data_wait_ms() -> u64 {
+    DEFAULT_ME_READER_ROUTE_DATA_WAIT_MS
+}
+
+pub(crate) fn default_me_d2c_flush_batch_max_frames() -> usize {
+    DEFAULT_ME_D2C_FLUSH_BATCH_MAX_FRAMES
+}
+
+pub(crate) fn default_me_d2c_flush_batch_max_bytes() -> usize {
+    DEFAULT_ME_D2C_FLUSH_BATCH_MAX_BYTES
+}
+
+pub(crate) fn default_me_d2c_flush_batch_max_delay_us() -> u64 {
+    DEFAULT_ME_D2C_FLUSH_BATCH_MAX_DELAY_US
+}
+
+pub(crate) fn default_me_d2c_ack_flush_immediate() -> bool {
+    DEFAULT_ME_D2C_ACK_FLUSH_IMMEDIATE
+}
+
+pub(crate) fn default_me_quota_soft_overshoot_bytes() -> u64 {
+    DEFAULT_ME_QUOTA_SOFT_OVERSHOOT_BYTES
+}
+
+pub(crate) fn default_me_d2c_frame_buf_shrink_threshold_bytes() -> usize {
+    DEFAULT_ME_D2C_FRAME_BUF_SHRINK_THRESHOLD_BYTES
+}
+
+pub(crate) fn default_direct_relay_copy_buf_c2s_bytes() -> usize {
+    DEFAULT_DIRECT_RELAY_COPY_BUF_C2S_BYTES
+}
+
+pub(crate) fn default_direct_relay_copy_buf_s2c_bytes() -> usize {
+    DEFAULT_DIRECT_RELAY_COPY_BUF_S2C_BYTES
+}
+
+pub(crate) fn default_me_writer_pick_sample_size() -> u8 {
+    DEFAULT_ME_WRITER_PICK_SAMPLE_SIZE
+}
+
+pub(crate) fn default_me_health_interval_ms_unhealthy() -> u64 {
+    DEFAULT_ME_HEALTH_INTERVAL_MS_UNHEALTHY
+}
+
+pub(crate) fn default_me_health_interval_ms_healthy() -> u64 {
+    DEFAULT_ME_HEALTH_INTERVAL_MS_HEALTHY
+}
+
+pub(crate) fn default_me_admission_poll_ms() -> u64 {
+    DEFAULT_ME_ADMISSION_POLL_MS
+}
+
+pub(crate) fn default_me_warn_rate_limit_ms() -> u64 {
+    DEFAULT_ME_WARN_RATE_LIMIT_MS
+}
+
+pub(crate) fn default_me_route_hybrid_max_wait_ms() -> u64 {
+    DEFAULT_ME_ROUTE_HYBRID_MAX_WAIT_MS
+}
+
+pub(crate) fn default_me_route_blocking_send_timeout_ms() -> u64 {
+    DEFAULT_ME_ROUTE_BLOCKING_SEND_TIMEOUT_MS
+}
+
+pub(crate) fn default_me_c2me_send_timeout_ms() -> u64 {
+    DEFAULT_ME_C2ME_SEND_TIMEOUT_MS
+}
+
 pub(crate) fn default_upstream_connect_retry_attempts() -> u32 {
     DEFAULT_UPSTREAM_CONNECT_RETRY_ATTEMPTS
 }
@@ -253,6 +501,10 @@ pub(crate) fn default_upstream_unhealthy_fail_threshold() -> u32 {
     DEFAULT_UPSTREAM_UNHEALTHY_FAIL_THRESHOLD
 }
 
+pub(crate) fn default_upstream_connect_budget_ms() -> u64 {
+    DEFAULT_UPSTREAM_CONNECT_BUDGET_MS
+}
+
 pub(crate) fn default_upstream_connect_failfast_hard_errors() -> bool {
     false
 }
@@ -306,7 +558,7 @@ pub(crate) fn default_beobachten_flush_secs() -> u64 {
 }
 
 pub(crate) fn default_beobachten_file() -> String {
-    "cache/beobachten.txt".to_string()
+    "/etc/telemt/beobachten.txt".to_string()
 }
 
 pub(crate) fn default_tls_new_session_tickets() -> u8 {
@@ -318,17 +570,67 @@ pub(crate) fn default_tls_full_cert_ttl_secs() -> u64 {
 }
 
 pub(crate) fn default_server_hello_delay_min_ms() -> u64 {
-    0
+    8
 }
 
 pub(crate) fn default_server_hello_delay_max_ms() -> u64 {
-    0
+    24
 }
 
 pub(crate) fn default_alpn_enforce() -> bool {
     true
 }
 
+pub(crate) fn default_mask_shape_hardening() -> bool {
+    true
+}
+
+pub(crate) fn default_mask_shape_hardening_aggressive_mode() -> bool {
+    false
+}
+
+pub(crate) fn default_mask_shape_bucket_floor_bytes() -> usize {
+    512
+}
+
+pub(crate) fn default_mask_shape_bucket_cap_bytes() -> usize {
+    4096
+}
+
+pub(crate) fn default_mask_shape_above_cap_blur() -> bool {
+    false
+}
+
+pub(crate) fn default_mask_shape_above_cap_blur_max_bytes() -> usize {
+    512
+}
+
+#[cfg(not(test))]
+pub(crate) fn default_mask_relay_max_bytes() -> usize {
+    5 * 1024 * 1024
+}
+
+#[cfg(test)]
+pub(crate) fn default_mask_relay_max_bytes() -> usize {
+    32 * 1024
+}
+
+pub(crate) fn default_mask_classifier_prefetch_timeout_ms() -> u64 {
+    5
+}
+
+pub(crate) fn default_mask_timing_normalization_enabled() -> bool {
+    false
+}
+
+pub(crate) fn default_mask_timing_normalization_floor_ms() -> u64 {
+    0
+}
+
+pub(crate) fn default_mask_timing_normalization_ceiling_ms() -> u64 {
+    0
+}
+
 pub(crate) fn default_stun_servers() -> Vec<String> {
     vec![
         "stun.l.google.com:5349".to_string(),
@@ -443,13 +745,41 @@ pub(crate) fn default_proxy_secret_len_max() -> usize {
 }
 
 pub(crate) fn default_me_reinit_drain_timeout_secs() -> u64 {
-    120
+    90
 }
 
 pub(crate) fn default_me_pool_drain_ttl_secs() -> u64 {
     90
 }
 
+pub(crate) fn default_me_instadrain() -> bool {
+    false
+}
+
+pub(crate) fn default_me_pool_drain_threshold() -> u64 {
+    32
+}
+
+pub(crate) fn default_me_pool_drain_soft_evict_enabled() -> bool {
+    DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_ENABLED
+}
+
+pub(crate) fn default_me_pool_drain_soft_evict_grace_secs() -> u64 {
+    DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_GRACE_SECS
+}
+
+pub(crate) fn default_me_pool_drain_soft_evict_per_writer() -> u8 {
+    DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_PER_WRITER
+}
+
+pub(crate) fn default_me_pool_drain_soft_evict_budget_per_core() -> u16 {
+    DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_BUDGET_PER_CORE
+}
+
+pub(crate) fn default_me_pool_drain_soft_evict_cooldown_ms() -> u64 {
+    DEFAULT_ME_POOL_DRAIN_SOFT_EVICT_COOLDOWN_MS
+}
+
 pub(crate) fn default_me_bind_stale_ttl_secs() -> u64 {
     default_me_pool_drain_ttl_secs()
 }
@@ -501,6 +831,14 @@ pub(crate) fn default_user_max_unique_ips_window_secs() -> u64 {
     DEFAULT_USER_MAX_UNIQUE_IPS_WINDOW_SECS
 }
 
+pub(crate) fn default_user_max_tcp_conns_global_each() -> usize {
+    0
+}
+
+pub(crate) fn default_user_max_unique_ips_global_each() -> usize {
+    0
+}
+
 // Custom deserializer helpers
 
 #[derive(Deserialize)]

src/config/mod.rs

@@ -1,9 +1,9 @@
 //! Configuration.
 
 pub(crate) mod defaults;
-mod types;
-mod load;
 pub mod hot_reload;
+mod load;
+mod types;
 
 pub use load::ProxyConfig;
 pub use types::*;

src/config/tests/load_idle_policy_tests.rs

@@ -0,0 +1,102 @@
+use super::*;
+use std::fs;
+use std::path::PathBuf;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+fn write_temp_config(contents: &str) -> PathBuf {
+    let nonce = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .expect("system time must be after unix epoch")
+        .as_nanos();
+    let path = std::env::temp_dir().join(format!("telemt-idle-policy-{nonce}.toml"));
+    fs::write(&path, contents).expect("temp config write must succeed");
+    path
+}
+
+fn remove_temp_config(path: &PathBuf) {
+    let _ = fs::remove_file(path);
+}
+
+#[test]
+fn default_timeouts_enable_apple_compatible_handshake_profile() {
+    let cfg = ProxyConfig::default();
+    assert_eq!(cfg.timeouts.client_first_byte_idle_secs, 300);
+    assert_eq!(cfg.timeouts.client_handshake, 60);
+}
+
+#[test]
+fn load_accepts_zero_first_byte_idle_timeout_as_legacy_opt_out() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+client_first_byte_idle_secs = 0
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path).expect("config with zero first-byte idle timeout must load");
+    assert_eq!(cfg.timeouts.client_first_byte_idle_secs, 0);
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_relay_hard_idle_smaller_than_soft_idle_with_clear_error() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+relay_client_idle_soft_secs = 120
+relay_client_idle_hard_secs = 60
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("config with hard<soft must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains(
+            "timeouts.relay_client_idle_hard_secs must be >= timeouts.relay_client_idle_soft_secs"
+        ),
+        "error must explain the violated hard>=soft invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_relay_grace_larger_than_hard_idle_with_clear_error() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+relay_client_idle_soft_secs = 60
+relay_client_idle_hard_secs = 120
+relay_idle_grace_after_downstream_activity_secs = 121
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("config with grace>hard must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("timeouts.relay_idle_grace_after_downstream_activity_secs must be <= timeouts.relay_client_idle_hard_secs"),
+        "error must explain the violated grace<=hard invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_zero_handshake_timeout_with_clear_error() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+client_handshake = 0
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("config with zero handshake timeout must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("timeouts.client_handshake must be > 0"),
+        "error must explain that handshake timeout must be positive, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}

src/config/tests/load_mask_classifier_prefetch_timeout_security_tests.rs

@@ -0,0 +1,76 @@
+use super::*;
+use std::fs;
+use std::path::PathBuf;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+fn write_temp_config(contents: &str) -> PathBuf {
+    let nonce = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .expect("system time must be after unix epoch")
+        .as_nanos();
+    let path = std::env::temp_dir().join(format!(
+        "telemt-load-mask-prefetch-timeout-security-{nonce}.toml"
+    ));
+    fs::write(&path, contents).expect("temp config write must succeed");
+    path
+}
+
+fn remove_temp_config(path: &PathBuf) {
+    let _ = fs::remove_file(path);
+}
+
+#[test]
+fn load_rejects_mask_classifier_prefetch_timeout_below_min_bound() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_classifier_prefetch_timeout_ms = 4
+"#,
+    );
+
+    let err = ProxyConfig::load(&path)
+        .expect_err("prefetch timeout below minimum security bound must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_classifier_prefetch_timeout_ms must be within [5, 50]"),
+        "error must explain timeout bound invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_mask_classifier_prefetch_timeout_above_max_bound() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_classifier_prefetch_timeout_ms = 51
+"#,
+    );
+
+    let err = ProxyConfig::load(&path)
+        .expect_err("prefetch timeout above max security bound must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_classifier_prefetch_timeout_ms must be within [5, 50]"),
+        "error must explain timeout bound invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_mask_classifier_prefetch_timeout_within_bounds() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_classifier_prefetch_timeout_ms = 20
+"#,
+    );
+
+    let cfg =
+        ProxyConfig::load(&path).expect("prefetch timeout within security bounds must be accepted");
+    assert_eq!(cfg.censorship.mask_classifier_prefetch_timeout_ms, 20);
+
+    remove_temp_config(&path);
+}

src/config/tests/load_mask_shape_security_tests.rs

@@ -0,0 +1,292 @@
+use super::*;
+use std::fs;
+use std::path::PathBuf;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+fn write_temp_config(contents: &str) -> PathBuf {
+    let nonce = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .expect("system time must be after unix epoch")
+        .as_nanos();
+    let path = std::env::temp_dir().join(format!("telemt-load-mask-shape-security-{nonce}.toml"));
+    fs::write(&path, contents).expect("temp config write must succeed");
+    path
+}
+
+fn remove_temp_config(path: &PathBuf) {
+    let _ = fs::remove_file(path);
+}
+
+#[test]
+fn load_rejects_zero_mask_shape_bucket_floor_bytes() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_bucket_floor_bytes = 0
+mask_shape_bucket_cap_bytes = 4096
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("zero mask_shape_bucket_floor_bytes must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_shape_bucket_floor_bytes must be > 0"),
+        "error must explain floor>0 invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_mask_shape_bucket_cap_less_than_floor() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_bucket_floor_bytes = 1024
+mask_shape_bucket_cap_bytes = 512
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("mask_shape_bucket_cap_bytes < floor must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains(
+            "censorship.mask_shape_bucket_cap_bytes must be >= censorship.mask_shape_bucket_floor_bytes"
+        ),
+        "error must explain cap>=floor invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_mask_shape_bucket_cap_equal_to_floor() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = true
+mask_shape_bucket_floor_bytes = 1024
+mask_shape_bucket_cap_bytes = 1024
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path).expect("equal cap and floor must be accepted");
+    assert!(cfg.censorship.mask_shape_hardening);
+    assert_eq!(cfg.censorship.mask_shape_bucket_floor_bytes, 1024);
+    assert_eq!(cfg.censorship.mask_shape_bucket_cap_bytes, 1024);
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_above_cap_blur_when_shape_hardening_disabled() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = false
+mask_shape_above_cap_blur = true
+mask_shape_above_cap_blur_max_bytes = 64
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("above-cap blur must require shape hardening enabled");
+    let msg = err.to_string();
+    assert!(
+        msg.contains(
+            "censorship.mask_shape_above_cap_blur requires censorship.mask_shape_hardening = true"
+        ),
+        "error must explain blur prerequisite, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_above_cap_blur_with_zero_max_bytes() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = true
+mask_shape_above_cap_blur = true
+mask_shape_above_cap_blur_max_bytes = 0
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("above-cap blur max bytes must be > 0 when enabled");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_shape_above_cap_blur_max_bytes must be > 0 when censorship.mask_shape_above_cap_blur is enabled"),
+        "error must explain blur max bytes invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_timing_normalization_floor_zero_when_enabled() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_timing_normalization_enabled = true
+mask_timing_normalization_floor_ms = 0
+mask_timing_normalization_ceiling_ms = 200
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("timing normalization floor must be > 0 when enabled");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_timing_normalization_floor_ms must be > 0 when censorship.mask_timing_normalization_enabled is true"),
+        "error must explain timing floor invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_timing_normalization_ceiling_below_floor() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_timing_normalization_enabled = true
+mask_timing_normalization_floor_ms = 220
+mask_timing_normalization_ceiling_ms = 200
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("timing normalization ceiling must be >= floor");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_timing_normalization_ceiling_ms must be >= censorship.mask_timing_normalization_floor_ms"),
+        "error must explain timing ceiling/floor invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_valid_timing_normalization_and_above_cap_blur_config() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = true
+mask_shape_above_cap_blur = true
+mask_shape_above_cap_blur_max_bytes = 128
+mask_timing_normalization_enabled = true
+mask_timing_normalization_floor_ms = 150
+mask_timing_normalization_ceiling_ms = 240
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path)
+        .expect("valid blur and timing normalization settings must be accepted");
+    assert!(cfg.censorship.mask_shape_hardening);
+    assert!(cfg.censorship.mask_shape_above_cap_blur);
+    assert_eq!(cfg.censorship.mask_shape_above_cap_blur_max_bytes, 128);
+    assert!(cfg.censorship.mask_timing_normalization_enabled);
+    assert_eq!(cfg.censorship.mask_timing_normalization_floor_ms, 150);
+    assert_eq!(cfg.censorship.mask_timing_normalization_ceiling_ms, 240);
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_aggressive_shape_mode_when_shape_hardening_disabled() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = false
+mask_shape_hardening_aggressive_mode = true
+"#,
+    );
+
+    let err = ProxyConfig::load(&path)
+        .expect_err("aggressive shape hardening mode must require shape hardening enabled");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_shape_hardening_aggressive_mode requires censorship.mask_shape_hardening = true"),
+        "error must explain aggressive-mode prerequisite, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_aggressive_shape_mode_when_shape_hardening_enabled() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_shape_hardening = true
+mask_shape_hardening_aggressive_mode = true
+mask_shape_above_cap_blur = true
+mask_shape_above_cap_blur_max_bytes = 8
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path)
+        .expect("aggressive shape hardening mode should be accepted when prerequisites are met");
+    assert!(cfg.censorship.mask_shape_hardening);
+    assert!(cfg.censorship.mask_shape_hardening_aggressive_mode);
+    assert!(cfg.censorship.mask_shape_above_cap_blur);
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_zero_mask_relay_max_bytes() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_relay_max_bytes = 0
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("mask_relay_max_bytes must be > 0");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_relay_max_bytes must be > 0"),
+        "error must explain non-zero relay cap invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_mask_relay_max_bytes_above_upper_bound() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_relay_max_bytes = 67108865
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("mask_relay_max_bytes above hard cap must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("censorship.mask_relay_max_bytes must be <= 67108864"),
+        "error must explain relay cap upper bound invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_valid_mask_relay_max_bytes() {
+    let path = write_temp_config(
+        r#"
+[censorship]
+mask_relay_max_bytes = 8388608
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path).expect("valid mask_relay_max_bytes must be accepted");
+    assert_eq!(cfg.censorship.mask_relay_max_bytes, 8_388_608);
+
+    remove_temp_config(&path);
+}

src/config/tests/load_memory_envelope_tests.rs

@@ -0,0 +1,117 @@
+use super::*;
+use std::fs;
+use std::path::PathBuf;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+fn write_temp_config(contents: &str) -> PathBuf {
+    let nonce = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .expect("system time must be after unix epoch")
+        .as_nanos();
+    let path = std::env::temp_dir().join(format!("telemt-load-memory-envelope-{nonce}.toml"));
+    fs::write(&path, contents).expect("temp config write must succeed");
+    path
+}
+
+fn remove_temp_config(path: &PathBuf) {
+    let _ = fs::remove_file(path);
+}
+
+#[test]
+fn load_rejects_writer_cmd_capacity_above_upper_bound() {
+    let path = write_temp_config(
+        r#"
+[general]
+me_writer_cmd_channel_capacity = 16385
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("writer command capacity above hard cap must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("general.me_writer_cmd_channel_capacity must be within [1, 16384]"),
+        "error must explain writer command capacity hard cap, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_route_channel_capacity_above_upper_bound() {
+    let path = write_temp_config(
+        r#"
+[general]
+me_route_channel_capacity = 8193
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("route channel capacity above hard cap must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("general.me_route_channel_capacity must be within [1, 8192]"),
+        "error must explain route channel hard cap, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_c2me_channel_capacity_above_upper_bound() {
+    let path = write_temp_config(
+        r#"
+[general]
+me_c2me_channel_capacity = 8193
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("c2me channel capacity above hard cap must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("general.me_c2me_channel_capacity must be within [1, 8192]"),
+        "error must explain c2me channel hard cap, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_max_client_frame_above_upper_bound() {
+    let path = write_temp_config(
+        r#"
+[general]
+max_client_frame = 16777217
+"#,
+    );
+
+    let err = ProxyConfig::load(&path).expect_err("max_client_frame above hard cap must fail");
+    let msg = err.to_string();
+    assert!(
+        msg.contains("general.max_client_frame must be within [4096, 16777216]"),
+        "error must explain max_client_frame hard cap, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_memory_limits_at_hard_upper_bounds() {
+    let path = write_temp_config(
+        r#"
+[general]
+me_writer_cmd_channel_capacity = 16384
+me_route_channel_capacity = 8192
+me_c2me_channel_capacity = 8192
+max_client_frame = 16777216
+"#,
+    );
+
+    let cfg = ProxyConfig::load(&path).expect("hard upper bound values must be accepted");
+    assert_eq!(cfg.general.me_writer_cmd_channel_capacity, 16384);
+    assert_eq!(cfg.general.me_route_channel_capacity, 8192);
+    assert_eq!(cfg.general.me_c2me_channel_capacity, 8192);
+    assert_eq!(cfg.general.max_client_frame, 16 * 1024 * 1024);
+
+    remove_temp_config(&path);
+}

src/config/tests/load_security_tests.rs

@@ -0,0 +1,88 @@
+use super::*;
+use std::fs;
+use std::path::PathBuf;
+use std::time::{SystemTime, UNIX_EPOCH};
+
+fn write_temp_config(contents: &str) -> PathBuf {
+    let nonce = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .expect("system time must be after unix epoch")
+        .as_nanos();
+    let path = std::env::temp_dir().join(format!("telemt-load-security-{nonce}.toml"));
+    fs::write(&path, contents).expect("temp config write must succeed");
+    path
+}
+
+fn remove_temp_config(path: &PathBuf) {
+    let _ = fs::remove_file(path);
+}
+
+#[test]
+fn load_rejects_server_hello_delay_equal_to_handshake_timeout_budget() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+client_handshake = 1
+
+[censorship]
+server_hello_delay_max_ms = 1000
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("delay equal to handshake timeout must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains(
+            "censorship.server_hello_delay_max_ms must be < timeouts.client_handshake * 1000"
+        ),
+        "error must explain delay<timeout invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_rejects_server_hello_delay_larger_than_handshake_timeout_budget() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+client_handshake = 1
+
+[censorship]
+server_hello_delay_max_ms = 1500
+"#,
+    );
+
+    let err =
+        ProxyConfig::load(&path).expect_err("delay larger than handshake timeout must be rejected");
+    let msg = err.to_string();
+    assert!(
+        msg.contains(
+            "censorship.server_hello_delay_max_ms must be < timeouts.client_handshake * 1000"
+        ),
+        "error must explain delay<timeout invariant, got: {msg}"
+    );
+
+    remove_temp_config(&path);
+}
+
+#[test]
+fn load_accepts_server_hello_delay_strictly_below_handshake_timeout_budget() {
+    let path = write_temp_config(
+        r#"
+[timeouts]
+client_handshake = 1
+
+[censorship]
+server_hello_delay_max_ms = 999
+"#,
+    );
+
+    let cfg =
+        ProxyConfig::load(&path).expect("delay below handshake timeout budget must be accepted");
+    assert_eq!(cfg.timeouts.client_handshake, 1);
+    assert_eq!(cfg.censorship.server_hello_delay_max_ms, 999);
+
+    remove_temp_config(&path);
+}

src/config/types.rs

@@ -3,6 +3,7 @@ use ipnetwork::IpNetwork;
 use serde::{Deserialize, Serialize};
 use std::collections::HashMap;
 use std::net::IpAddr;
+use std::path::PathBuf;
 
 use super::defaults::*;
 
@@ -134,8 +135,8 @@ impl MeSocksKdfPolicy {
 #[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
 #[serde(rename_all = "lowercase")]
 pub enum MeBindStaleMode {
-    Never,
     #[default]
+    Never,
     Ttl,
     Always,
 }
@@ -212,6 +213,32 @@ impl MeRouteNoWriterMode {
     }
 }
 
+/// Middle-End writer selection mode for new client bindings.
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
+#[serde(rename_all = "snake_case")]
+pub enum MeWriterPickMode {
+    SortedRr,
+    #[default]
+    P2c,
+}
+
+impl MeWriterPickMode {
+    pub fn as_u8(self) -> u8 {
+        match self {
+            MeWriterPickMode::SortedRr => 0,
+            MeWriterPickMode::P2c => 1,
+        }
+    }
+
+    pub fn from_u8(raw: u8) -> Self {
+        match raw {
+            0 => MeWriterPickMode::SortedRr,
+            1 => MeWriterPickMode::P2c,
+            _ => MeWriterPickMode::P2c,
+        }
+    }
+}
+
 /// Per-user unique source IP limit mode.
 #[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
 #[serde(rename_all = "snake_case")]
@@ -330,6 +357,9 @@ impl Default for NetworkConfig {
 
 #[derive(Debug, Clone, Serialize, Deserialize)]
 pub struct GeneralConfig {
+    #[serde(default)]
+    pub data_path: Option<PathBuf>,
+
     #[serde(default)]
     pub modes: ProxyModes,
 
@@ -399,6 +429,11 @@ pub struct GeneralConfig {
     #[serde(default = "default_me2dc_fallback")]
     pub me2dc_fallback: bool,
 
+    /// Fast ME->Direct fallback mode for new sessions.
+    /// Active only when both `use_middle_proxy=true` and `me2dc_fallback=true`.
+    #[serde(default = "default_me2dc_fast")]
+    pub me2dc_fast: bool,
+
     /// Enable ME keepalive padding frames.
     #[serde(default = "default_true")]
     pub me_keepalive_enabled: bool,
@@ -420,6 +455,61 @@ pub struct GeneralConfig {
     #[serde(default = "default_rpc_proxy_req_every")]
     pub rpc_proxy_req_every: u64,
 
+    /// Capacity of per-ME writer command channel.
+    #[serde(default = "default_me_writer_cmd_channel_capacity")]
+    pub me_writer_cmd_channel_capacity: usize,
+
+    /// Capacity of per-connection ME response route channel.
+    #[serde(default = "default_me_route_channel_capacity")]
+    pub me_route_channel_capacity: usize,
+
+    /// Capacity of per-client command queue from client reader to ME sender task.
+    #[serde(default = "default_me_c2me_channel_capacity")]
+    pub me_c2me_channel_capacity: usize,
+
+    /// Maximum wait in milliseconds for enqueueing C2ME commands when the queue is full.
+    /// `0` keeps legacy unbounded wait behavior.
+    #[serde(default = "default_me_c2me_send_timeout_ms")]
+    pub me_c2me_send_timeout_ms: u64,
+
+    /// Bounded wait in milliseconds for routing ME DATA to per-connection queue.
+    /// `0` keeps non-blocking routing; values >0 enable bounded wait for compatibility.
+    #[serde(default = "default_me_reader_route_data_wait_ms")]
+    pub me_reader_route_data_wait_ms: u64,
+
+    /// Maximum number of ME->Client responses coalesced before flush.
+    #[serde(default = "default_me_d2c_flush_batch_max_frames")]
+    pub me_d2c_flush_batch_max_frames: usize,
+
+    /// Maximum total payload bytes coalesced before flush.
+    #[serde(default = "default_me_d2c_flush_batch_max_bytes")]
+    pub me_d2c_flush_batch_max_bytes: usize,
+
+    /// Maximum wait in microseconds to coalesce additional ME->Client responses.
+    /// `0` disables timed coalescing.
+    #[serde(default = "default_me_d2c_flush_batch_max_delay_us")]
+    pub me_d2c_flush_batch_max_delay_us: u64,
+
+    /// Flush client writer immediately after quick-ack write.
+    #[serde(default = "default_me_d2c_ack_flush_immediate")]
+    pub me_d2c_ack_flush_immediate: bool,
+
+    /// Additional bytes above strict per-user quota allowed in hot-path soft mode.
+    #[serde(default = "default_me_quota_soft_overshoot_bytes")]
+    pub me_quota_soft_overshoot_bytes: u64,
+
+    /// Shrink threshold for reusable ME->Client frame assembly buffer.
+    #[serde(default = "default_me_d2c_frame_buf_shrink_threshold_bytes")]
+    pub me_d2c_frame_buf_shrink_threshold_bytes: usize,
+
+    /// Copy buffer size for client->DC direction in direct relay.
+    #[serde(default = "default_direct_relay_copy_buf_c2s_bytes")]
+    pub direct_relay_copy_buf_c2s_bytes: usize,
+
+    /// Copy buffer size for DC->client direction in direct relay.
+    #[serde(default = "default_direct_relay_copy_buf_s2c_bytes")]
+    pub direct_relay_copy_buf_s2c_bytes: usize,
+
     /// Max pending ciphertext buffer per client writer (bytes).
     /// Controls FakeTLS backpressure vs throughput.
     #[serde(default = "default_crypto_pending_buffer")]
@@ -520,10 +610,47 @@ pub struct GeneralConfig {
     #[serde(default = "default_me_adaptive_floor_min_writers_single_endpoint")]
     pub me_adaptive_floor_min_writers_single_endpoint: u8,
 
+    /// Minimum writer target for multi-endpoint DC groups in adaptive floor mode.
+    #[serde(default = "default_me_adaptive_floor_min_writers_multi_endpoint")]
+    pub me_adaptive_floor_min_writers_multi_endpoint: u8,
+
     /// Grace period in seconds to hold static floor after activity in adaptive mode.
     #[serde(default = "default_me_adaptive_floor_recover_grace_secs")]
     pub me_adaptive_floor_recover_grace_secs: u64,
 
+    /// Global ME writer budget per logical CPU core in adaptive mode.
+    #[serde(default = "default_me_adaptive_floor_writers_per_core_total")]
+    pub me_adaptive_floor_writers_per_core_total: u16,
+
+    /// Override logical CPU core count for adaptive floor calculations.
+    /// Set to 0 to use runtime auto-detection.
+    #[serde(default = "default_me_adaptive_floor_cpu_cores_override")]
+    pub me_adaptive_floor_cpu_cores_override: u16,
+
+    /// Per-core max extra writers above base required floor for single-endpoint DC groups.
+    #[serde(default = "default_me_adaptive_floor_max_extra_writers_single_per_core")]
+    pub me_adaptive_floor_max_extra_writers_single_per_core: u16,
+
+    /// Per-core max extra writers above base required floor for multi-endpoint DC groups.
+    #[serde(default = "default_me_adaptive_floor_max_extra_writers_multi_per_core")]
+    pub me_adaptive_floor_max_extra_writers_multi_per_core: u16,
+
+    /// Hard cap for active ME writers per logical CPU core.
+    #[serde(default = "default_me_adaptive_floor_max_active_writers_per_core")]
+    pub me_adaptive_floor_max_active_writers_per_core: u16,
+
+    /// Hard cap for warm ME writers per logical CPU core.
+    #[serde(default = "default_me_adaptive_floor_max_warm_writers_per_core")]
+    pub me_adaptive_floor_max_warm_writers_per_core: u16,
+
+    /// Hard global cap for active ME writers.
+    #[serde(default = "default_me_adaptive_floor_max_active_writers_global")]
+    pub me_adaptive_floor_max_active_writers_global: u32,
+
+    /// Hard global cap for warm ME writers.
+    #[serde(default = "default_me_adaptive_floor_max_warm_writers_global")]
+    pub me_adaptive_floor_max_warm_writers_global: u32,
+
     /// Connect attempts for the selected upstream before returning error/fallback.
     #[serde(default = "default_upstream_connect_retry_attempts")]
     pub upstream_connect_retry_attempts: u32,
@@ -532,6 +659,14 @@ pub struct GeneralConfig {
     #[serde(default = "default_upstream_connect_retry_backoff_ms")]
     pub upstream_connect_retry_backoff_ms: u64,
 
+    /// Total wall-clock budget in milliseconds for one upstream connect request across retries.
+    #[serde(default = "default_upstream_connect_budget_ms")]
+    pub upstream_connect_budget_ms: u64,
+
+    /// Per-attempt TCP connect timeout to Telegram DC (seconds).
+    #[serde(default = "default_connect_timeout")]
+    pub tg_connect: u64,
+
     /// Consecutive failed requests before upstream is marked unhealthy.
     #[serde(default = "default_upstream_unhealthy_fail_threshold")]
     pub upstream_unhealthy_fail_threshold: u32,
@@ -579,6 +714,22 @@ pub struct GeneralConfig {
     #[serde(default = "default_me_route_backpressure_high_watermark_pct")]
     pub me_route_backpressure_high_watermark_pct: u8,
 
+    /// Health monitor interval in milliseconds while writer coverage is degraded.
+    #[serde(default = "default_me_health_interval_ms_unhealthy")]
+    pub me_health_interval_ms_unhealthy: u64,
+
+    /// Health monitor interval in milliseconds while writer coverage is stable.
+    #[serde(default = "default_me_health_interval_ms_healthy")]
+    pub me_health_interval_ms_healthy: u64,
+
+    /// Poll interval in milliseconds for conditional-admission state checks.
+    #[serde(default = "default_me_admission_poll_ms")]
+    pub me_admission_poll_ms: u64,
+
+    /// Cooldown for repetitive ME warning logs in milliseconds.
+    #[serde(default = "default_me_warn_rate_limit_ms")]
+    pub me_warn_rate_limit_ms: u64,
+
     /// ME route behavior when no writer is immediately available.
     #[serde(default)]
     pub me_route_no_writer_mode: MeRouteNoWriterMode,
@@ -587,6 +738,15 @@ pub struct GeneralConfig {
     #[serde(default = "default_me_route_no_writer_wait_ms")]
     pub me_route_no_writer_wait_ms: u64,
 
+    /// Maximum cumulative wait in milliseconds for hybrid no-writer mode before failfast.
+    #[serde(default = "default_me_route_hybrid_max_wait_ms")]
+    pub me_route_hybrid_max_wait_ms: u64,
+
+    /// Maximum wait in milliseconds for blocking ME writer channel send fallback.
+    /// `0` keeps legacy unbounded wait behavior.
+    #[serde(default = "default_me_route_blocking_send_timeout_ms")]
+    pub me_route_blocking_send_timeout_ms: u64,
+
     /// Number of inline recovery attempts in legacy mode.
     #[serde(default = "default_me_route_inline_recovery_attempts")]
     pub me_route_inline_recovery_attempts: u32,
@@ -669,6 +829,35 @@ pub struct GeneralConfig {
     #[serde(default = "default_me_pool_drain_ttl_secs")]
     pub me_pool_drain_ttl_secs: u64,
 
+    /// Force-remove any draining writer on the next cleanup tick, regardless of age/deadline.
+    #[serde(default = "default_me_instadrain")]
+    pub me_instadrain: bool,
+
+    /// Maximum allowed number of draining ME writers before oldest ones are force-closed in batches.
+    /// Set to 0 to disable threshold-based draining cleanup and keep timeout-only behavior.
+    #[serde(default = "default_me_pool_drain_threshold")]
+    pub me_pool_drain_threshold: u64,
+
+    /// Enable staged client eviction for draining ME writers that remain non-empty past TTL.
+    #[serde(default = "default_me_pool_drain_soft_evict_enabled")]
+    pub me_pool_drain_soft_evict_enabled: bool,
+
+    /// Extra grace in seconds after drain TTL before soft-eviction stage starts.
+    #[serde(default = "default_me_pool_drain_soft_evict_grace_secs")]
+    pub me_pool_drain_soft_evict_grace_secs: u64,
+
+    /// Maximum number of client sessions to evict from one draining writer per health tick.
+    #[serde(default = "default_me_pool_drain_soft_evict_per_writer")]
+    pub me_pool_drain_soft_evict_per_writer: u8,
+
+    /// Soft-eviction budget per CPU core for one health tick.
+    #[serde(default = "default_me_pool_drain_soft_evict_budget_per_core")]
+    pub me_pool_drain_soft_evict_budget_per_core: u16,
+
+    /// Cooldown for repetitive soft-eviction on the same writer in milliseconds.
+    #[serde(default = "default_me_pool_drain_soft_evict_cooldown_ms")]
+    pub me_pool_drain_soft_evict_cooldown_ms: u64,
+
     /// Policy for new binds on stale draining writers.
     #[serde(default)]
     pub me_bind_stale_mode: MeBindStaleMode,
@@ -683,7 +872,7 @@ pub struct GeneralConfig {
     pub me_pool_min_fresh_ratio: f32,
 
     /// Drain timeout in seconds for stale ME writers after endpoint map changes.
-    /// Set to 0 to keep stale writers draining indefinitely (no force-close).
+    /// Set to 0 to use the runtime safety fallback timeout.
     #[serde(default = "default_me_reinit_drain_timeout_secs")]
     pub me_reinit_drain_timeout_secs: u64,
 
@@ -713,6 +902,14 @@ pub struct GeneralConfig {
     #[serde(default = "default_me_deterministic_writer_sort")]
     pub me_deterministic_writer_sort: bool,
 
+    /// Writer selection mode for ME route bind path.
+    #[serde(default)]
+    pub me_writer_pick_mode: MeWriterPickMode,
+
+    /// Number of candidates sampled by writer picker in `p2c` mode.
+    #[serde(default = "default_me_writer_pick_sample_size")]
+    pub me_writer_pick_sample_size: u8,
+
     /// Enable NTP drift check at startup.
     #[serde(default = "default_ntp_check")]
     pub ntp_check: bool,
@@ -733,6 +930,7 @@ pub struct GeneralConfig {
 impl Default for GeneralConfig {
     fn default() -> Self {
         Self {
+            data_path: None,
             modes: ProxyModes::default(),
             prefer_ipv6: false,
             fast_mode: default_true(),
@@ -750,11 +948,26 @@ impl Default for GeneralConfig {
             middle_proxy_warm_standby: default_middle_proxy_warm_standby(),
             me_init_retry_attempts: default_me_init_retry_attempts(),
             me2dc_fallback: default_me2dc_fallback(),
+            me2dc_fast: default_me2dc_fast(),
             me_keepalive_enabled: default_true(),
             me_keepalive_interval_secs: default_keepalive_interval(),
             me_keepalive_jitter_secs: default_keepalive_jitter(),
             me_keepalive_payload_random: default_true(),
             rpc_proxy_req_every: default_rpc_proxy_req_every(),
+            me_writer_cmd_channel_capacity: default_me_writer_cmd_channel_capacity(),
+            me_route_channel_capacity: default_me_route_channel_capacity(),
+            me_c2me_channel_capacity: default_me_c2me_channel_capacity(),
+            me_c2me_send_timeout_ms: default_me_c2me_send_timeout_ms(),
+            me_reader_route_data_wait_ms: default_me_reader_route_data_wait_ms(),
+            me_d2c_flush_batch_max_frames: default_me_d2c_flush_batch_max_frames(),
+            me_d2c_flush_batch_max_bytes: default_me_d2c_flush_batch_max_bytes(),
+            me_d2c_flush_batch_max_delay_us: default_me_d2c_flush_batch_max_delay_us(),
+            me_d2c_ack_flush_immediate: default_me_d2c_ack_flush_immediate(),
+            me_quota_soft_overshoot_bytes: default_me_quota_soft_overshoot_bytes(),
+            me_d2c_frame_buf_shrink_threshold_bytes:
+                default_me_d2c_frame_buf_shrink_threshold_bytes(),
+            direct_relay_copy_buf_c2s_bytes: default_direct_relay_copy_buf_c2s_bytes(),
+            direct_relay_copy_buf_s2c_bytes: default_direct_relay_copy_buf_s2c_bytes(),
             me_warmup_stagger_enabled: default_true(),
             me_warmup_step_delay_ms: default_warmup_step_delay_ms(),
             me_warmup_step_jitter_ms: default_warmup_step_jitter_ms(),
@@ -763,17 +976,42 @@ impl Default for GeneralConfig {
             me_reconnect_backoff_cap_ms: default_reconnect_backoff_cap_ms(),
             me_reconnect_fast_retry_count: default_me_reconnect_fast_retry_count(),
             me_single_endpoint_shadow_writers: default_me_single_endpoint_shadow_writers(),
-            me_single_endpoint_outage_mode_enabled: default_me_single_endpoint_outage_mode_enabled(),
-            me_single_endpoint_outage_disable_quarantine: default_me_single_endpoint_outage_disable_quarantine(),
-            me_single_endpoint_outage_backoff_min_ms: default_me_single_endpoint_outage_backoff_min_ms(),
-            me_single_endpoint_outage_backoff_max_ms: default_me_single_endpoint_outage_backoff_max_ms(),
-            me_single_endpoint_shadow_rotate_every_secs: default_me_single_endpoint_shadow_rotate_every_secs(),
+            me_single_endpoint_outage_mode_enabled: default_me_single_endpoint_outage_mode_enabled(
+            ),
+            me_single_endpoint_outage_disable_quarantine:
+                default_me_single_endpoint_outage_disable_quarantine(),
+            me_single_endpoint_outage_backoff_min_ms:
+                default_me_single_endpoint_outage_backoff_min_ms(),
+            me_single_endpoint_outage_backoff_max_ms:
+                default_me_single_endpoint_outage_backoff_max_ms(),
+            me_single_endpoint_shadow_rotate_every_secs:
+                default_me_single_endpoint_shadow_rotate_every_secs(),
             me_floor_mode: MeFloorMode::default(),
             me_adaptive_floor_idle_secs: default_me_adaptive_floor_idle_secs(),
-            me_adaptive_floor_min_writers_single_endpoint: default_me_adaptive_floor_min_writers_single_endpoint(),
+            me_adaptive_floor_min_writers_single_endpoint:
+                default_me_adaptive_floor_min_writers_single_endpoint(),
+            me_adaptive_floor_min_writers_multi_endpoint:
+                default_me_adaptive_floor_min_writers_multi_endpoint(),
             me_adaptive_floor_recover_grace_secs: default_me_adaptive_floor_recover_grace_secs(),
+            me_adaptive_floor_writers_per_core_total:
+                default_me_adaptive_floor_writers_per_core_total(),
+            me_adaptive_floor_cpu_cores_override: default_me_adaptive_floor_cpu_cores_override(),
+            me_adaptive_floor_max_extra_writers_single_per_core:
+                default_me_adaptive_floor_max_extra_writers_single_per_core(),
+            me_adaptive_floor_max_extra_writers_multi_per_core:
+                default_me_adaptive_floor_max_extra_writers_multi_per_core(),
+            me_adaptive_floor_max_active_writers_per_core:
+                default_me_adaptive_floor_max_active_writers_per_core(),
+            me_adaptive_floor_max_warm_writers_per_core:
+                default_me_adaptive_floor_max_warm_writers_per_core(),
+            me_adaptive_floor_max_active_writers_global:
+                default_me_adaptive_floor_max_active_writers_global(),
+            me_adaptive_floor_max_warm_writers_global:
+                default_me_adaptive_floor_max_warm_writers_global(),
             upstream_connect_retry_attempts: default_upstream_connect_retry_attempts(),
             upstream_connect_retry_backoff_ms: default_upstream_connect_retry_backoff_ms(),
+            upstream_connect_budget_ms: default_upstream_connect_budget_ms(),
+            tg_connect: default_connect_timeout(),
             upstream_unhealthy_fail_threshold: default_upstream_unhealthy_fail_threshold(),
             upstream_connect_failfast_hard_errors: default_upstream_connect_failfast_hard_errors(),
             stun_iface_mismatch_ignore: false,
@@ -785,9 +1023,16 @@ impl Default for GeneralConfig {
             me_socks_kdf_policy: MeSocksKdfPolicy::Strict,
             me_route_backpressure_base_timeout_ms: default_me_route_backpressure_base_timeout_ms(),
             me_route_backpressure_high_timeout_ms: default_me_route_backpressure_high_timeout_ms(),
-            me_route_backpressure_high_watermark_pct: default_me_route_backpressure_high_watermark_pct(),
+            me_route_backpressure_high_watermark_pct:
+                default_me_route_backpressure_high_watermark_pct(),
+            me_health_interval_ms_unhealthy: default_me_health_interval_ms_unhealthy(),
+            me_health_interval_ms_healthy: default_me_health_interval_ms_healthy(),
+            me_admission_poll_ms: default_me_admission_poll_ms(),
+            me_warn_rate_limit_ms: default_me_warn_rate_limit_ms(),
             me_route_no_writer_mode: MeRouteNoWriterMode::default(),
             me_route_no_writer_wait_ms: default_me_route_no_writer_wait_ms(),
+            me_route_hybrid_max_wait_ms: default_me_route_hybrid_max_wait_ms(),
+            me_route_blocking_send_timeout_ms: default_me_route_blocking_send_timeout_ms(),
             me_route_inline_recovery_attempts: default_me_route_inline_recovery_attempts(),
             me_route_inline_recovery_wait_ms: default_me_route_inline_recovery_wait_ms(),
             links: LinksConfig::default(),
@@ -805,7 +1050,8 @@ impl Default for GeneralConfig {
             me_hardswap_warmup_delay_min_ms: default_me_hardswap_warmup_delay_min_ms(),
             me_hardswap_warmup_delay_max_ms: default_me_hardswap_warmup_delay_max_ms(),
             me_hardswap_warmup_extra_passes: default_me_hardswap_warmup_extra_passes(),
-            me_hardswap_warmup_pass_backoff_base_ms: default_me_hardswap_warmup_pass_backoff_base_ms(),
+            me_hardswap_warmup_pass_backoff_base_ms:
+                default_me_hardswap_warmup_pass_backoff_base_ms(),
             me_config_stable_snapshots: default_me_config_stable_snapshots(),
             me_config_apply_cooldown_secs: default_me_config_apply_cooldown_secs(),
             me_snapshot_require_http_2xx: default_me_snapshot_require_http_2xx(),
@@ -816,6 +1062,14 @@ impl Default for GeneralConfig {
             me_secret_atomic_snapshot: default_me_secret_atomic_snapshot(),
             proxy_secret_len_max: default_proxy_secret_len_max(),
             me_pool_drain_ttl_secs: default_me_pool_drain_ttl_secs(),
+            me_instadrain: default_me_instadrain(),
+            me_pool_drain_threshold: default_me_pool_drain_threshold(),
+            me_pool_drain_soft_evict_enabled: default_me_pool_drain_soft_evict_enabled(),
+            me_pool_drain_soft_evict_grace_secs: default_me_pool_drain_soft_evict_grace_secs(),
+            me_pool_drain_soft_evict_per_writer: default_me_pool_drain_soft_evict_per_writer(),
+            me_pool_drain_soft_evict_budget_per_core:
+                default_me_pool_drain_soft_evict_budget_per_core(),
+            me_pool_drain_soft_evict_cooldown_ms: default_me_pool_drain_soft_evict_cooldown_ms(),
             me_bind_stale_mode: MeBindStaleMode::default(),
             me_bind_stale_ttl_secs: default_me_bind_stale_ttl_secs(),
             me_pool_min_fresh_ratio: default_me_pool_min_fresh_ratio(),
@@ -826,6 +1080,8 @@ impl Default for GeneralConfig {
             me_reinit_trigger_channel: default_me_reinit_trigger_channel(),
             me_reinit_coalesce_window_ms: default_me_reinit_coalesce_window_ms(),
             me_deterministic_writer_sort: default_me_deterministic_writer_sort(),
+            me_writer_pick_mode: MeWriterPickMode::default(),
+            me_writer_pick_sample_size: default_me_writer_pick_sample_size(),
             ntp_check: default_ntp_check(),
             ntp_servers: default_ntp_servers(),
             auto_degradation_enabled: default_true(),
@@ -838,8 +1094,10 @@ impl GeneralConfig {
     /// Resolve the active updater interval for ME infrastructure refresh tasks.
     /// `update_every` has priority, otherwise legacy proxy_*_auto_reload_secs are used.
     pub fn effective_update_every_secs(&self) -> u64 {
-        self.update_every
-            .unwrap_or_else(|| self.proxy_secret_auto_reload_secs.min(self.proxy_config_auto_reload_secs))
+        self.update_every.unwrap_or_else(|| {
+            self.proxy_secret_auto_reload_secs
+                .min(self.proxy_config_auto_reload_secs)
+        })
     }
 
     /// Resolve periodic zero-downtime reinit interval for ME writers.
@@ -849,9 +1107,14 @@ impl GeneralConfig {
 
     /// Resolve force-close timeout for stale writers.
     /// `me_reinit_drain_timeout_secs` remains backward-compatible alias.
+    /// A configured `0` uses the runtime safety fallback (300s).
     pub fn effective_me_pool_force_close_secs(&self) -> u64 {
+        if self.me_reinit_drain_timeout_secs == 0 {
+            300
+        } else {
             self.me_reinit_drain_timeout_secs
         }
+    }
 }
 
 /// `[general.links]` — proxy link generation settings.
@@ -885,7 +1148,7 @@ impl Default for LinksConfig {
 #[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
 pub struct ApiConfig {
     /// Enable or disable REST API.
-    #[serde(default)]
+    #[serde(default = "default_true")]
     pub enabled: bool,
 
     /// Listen address for API in `IP:PORT` format.
@@ -913,6 +1176,22 @@ pub struct ApiConfig {
     #[serde(default = "default_api_minimal_runtime_cache_ttl_ms")]
     pub minimal_runtime_cache_ttl_ms: u64,
 
+    /// Enables runtime edge endpoints with optional cached aggregation.
+    #[serde(default = "default_api_runtime_edge_enabled")]
+    pub runtime_edge_enabled: bool,
+
+    /// Cache TTL for runtime edge aggregation payloads in milliseconds.
+    #[serde(default = "default_api_runtime_edge_cache_ttl_ms")]
+    pub runtime_edge_cache_ttl_ms: u64,
+
+    /// Top-N limit for edge connection leaderboard payloads.
+    #[serde(default = "default_api_runtime_edge_top_n")]
+    pub runtime_edge_top_n: usize,
+
+    /// Ring-buffer capacity for runtime edge control-plane events.
+    #[serde(default = "default_api_runtime_edge_events_capacity")]
+    pub runtime_edge_events_capacity: usize,
+
     /// Read-only mode: mutating endpoints are rejected.
     #[serde(default)]
     pub read_only: bool,
@@ -921,18 +1200,134 @@ pub struct ApiConfig {
 impl Default for ApiConfig {
     fn default() -> Self {
         Self {
-            enabled: false,
+            enabled: default_true(),
             listen: default_api_listen(),
             whitelist: default_api_whitelist(),
             auth_header: String::new(),
             request_body_limit_bytes: default_api_request_body_limit_bytes(),
             minimal_runtime_enabled: default_api_minimal_runtime_enabled(),
             minimal_runtime_cache_ttl_ms: default_api_minimal_runtime_cache_ttl_ms(),
+            runtime_edge_enabled: default_api_runtime_edge_enabled(),
+            runtime_edge_cache_ttl_ms: default_api_runtime_edge_cache_ttl_ms(),
+            runtime_edge_top_n: default_api_runtime_edge_top_n(),
+            runtime_edge_events_capacity: default_api_runtime_edge_events_capacity(),
             read_only: false,
         }
     }
 }
 
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
+#[serde(rename_all = "lowercase")]
+pub enum ConntrackMode {
+    #[default]
+    Tracked,
+    Notrack,
+    Hybrid,
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
+#[serde(rename_all = "lowercase")]
+pub enum ConntrackBackend {
+    #[default]
+    Auto,
+    Nftables,
+    Iptables,
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
+#[serde(rename_all = "lowercase")]
+pub enum ConntrackPressureProfile {
+    Conservative,
+    #[default]
+    Balanced,
+    Aggressive,
+}
+
+impl ConntrackPressureProfile {
+    pub fn client_first_byte_idle_cap_secs(self) -> u64 {
+        match self {
+            Self::Conservative => 30,
+            Self::Balanced => 20,
+            Self::Aggressive => 10,
+        }
+    }
+
+    pub fn direct_activity_timeout_secs(self) -> u64 {
+        match self {
+            Self::Conservative => 180,
+            Self::Balanced => 120,
+            Self::Aggressive => 60,
+        }
+    }
+
+    pub fn middle_soft_idle_cap_secs(self) -> u64 {
+        match self {
+            Self::Conservative => 60,
+            Self::Balanced => 30,
+            Self::Aggressive => 20,
+        }
+    }
+
+    pub fn middle_hard_idle_cap_secs(self) -> u64 {
+        match self {
+            Self::Conservative => 180,
+            Self::Balanced => 90,
+            Self::Aggressive => 60,
+        }
+    }
+}
+
+#[derive(Debug, Clone, Serialize, Deserialize)]
+pub struct ConntrackControlConfig {
+    /// Enables runtime conntrack-control worker for pressure mitigation.
+    #[serde(default = "default_conntrack_control_enabled")]
+    pub inline_conntrack_control: bool,
+
+    /// Conntrack mode for listener ingress traffic.
+    #[serde(default)]
+    pub mode: ConntrackMode,
+
+    /// Netfilter backend used to reconcile notrack rules.
+    #[serde(default)]
+    pub backend: ConntrackBackend,
+
+    /// Pressure profile for timeout caps under resource saturation.
+    #[serde(default)]
+    pub profile: ConntrackPressureProfile,
+
+    /// Listener IP allow-list for hybrid mode.
+    /// Ignored in tracked/notrack mode.
+    #[serde(default)]
+    pub hybrid_listener_ips: Vec<IpAddr>,
+
+    /// Pressure high watermark as percentage.
+    #[serde(default = "default_conntrack_pressure_high_watermark_pct")]
+    pub pressure_high_watermark_pct: u8,
+
+    /// Pressure low watermark as percentage.
+    #[serde(default = "default_conntrack_pressure_low_watermark_pct")]
+    pub pressure_low_watermark_pct: u8,
+
+    /// Maximum conntrack delete operations per second.
+    #[serde(default = "default_conntrack_delete_budget_per_sec")]
+    pub delete_budget_per_sec: u64,
+}
+
+impl Default for ConntrackControlConfig {
+    fn default() -> Self {
+        Self {
+            inline_conntrack_control: default_conntrack_control_enabled(),
+            mode: ConntrackMode::default(),
+            backend: ConntrackBackend::default(),
+            profile: ConntrackPressureProfile::default(),
+            hybrid_listener_ips: Vec::new(),
+            pressure_high_watermark_pct: default_conntrack_pressure_high_watermark_pct(),
+            pressure_low_watermark_pct: default_conntrack_pressure_low_watermark_pct(),
+            delete_budget_per_sec: default_conntrack_delete_budget_per_sec(),
+        }
+    }
+}
+
 #[derive(Debug, Clone, Serialize, Deserialize)]
 pub struct ServerConfig {
     #[serde(default = "default_port")]
@@ -962,9 +1357,29 @@ pub struct ServerConfig {
     #[serde(default)]
     pub proxy_protocol: bool,
 
+    /// Timeout in milliseconds for reading and parsing PROXY protocol headers.
+    #[serde(default = "default_proxy_protocol_header_timeout_ms")]
+    pub proxy_protocol_header_timeout_ms: u64,
+
+    /// Trusted source CIDRs allowed to send incoming PROXY protocol headers.
+    ///
+    /// If this field is omitted in config, it defaults to trust-all CIDRs
+    /// (`0.0.0.0/0` and `::/0`). If it is explicitly set to an empty list,
+    /// all PROXY protocol headers are rejected.
+    #[serde(default = "default_proxy_protocol_trusted_cidrs")]
+    pub proxy_protocol_trusted_cidrs: Vec<IpNetwork>,
+
+    /// Port for the Prometheus-compatible metrics endpoint.
+    /// Enables metrics when set; binds on all interfaces (dual-stack) by default.
     #[serde(default)]
     pub metrics_port: Option<u16>,
 
+    /// Listen address for metrics in `IP:PORT` format (e.g. `"127.0.0.1:9090"`).
+    /// When set, takes precedence over `metrics_port` and binds on the specified address only.
+    #[serde(default)]
+    pub metrics_listen: Option<String>,
+
+    /// CIDR whitelist for the metrics endpoint.
     #[serde(default = "default_metrics_whitelist")]
     pub metrics_whitelist: Vec<IpNetwork>,
 
@@ -973,6 +1388,25 @@ pub struct ServerConfig {
 
     #[serde(default)]
     pub listeners: Vec<ListenerConfig>,
+
+    /// TCP `listen(2)` backlog for client-facing sockets (also used for the metrics HTTP listener).
+    /// The effective queue is capped by the kernel (for example `somaxconn` on Linux).
+    #[serde(default = "default_listen_backlog")]
+    pub listen_backlog: u32,
+
+    /// Maximum number of concurrent client connections.
+    /// 0 means unlimited.
+    #[serde(default = "default_server_max_connections")]
+    pub max_connections: u32,
+
+    /// Maximum wait in milliseconds while acquiring a connection slot permit.
+    /// `0` keeps legacy unbounded wait behavior.
+    #[serde(default = "default_accept_permit_timeout_ms")]
+    pub accept_permit_timeout_ms: u64,
+
+    /// Runtime conntrack control and pressure policy.
+    #[serde(default)]
+    pub conntrack_control: ConntrackControlConfig,
 }
 
 impl Default for ServerConfig {
@@ -985,21 +1419,49 @@ impl Default for ServerConfig {
             listen_unix_sock_perm: None,
             listen_tcp: None,
             proxy_protocol: false,
+            proxy_protocol_header_timeout_ms: default_proxy_protocol_header_timeout_ms(),
+            proxy_protocol_trusted_cidrs: default_proxy_protocol_trusted_cidrs(),
             metrics_port: None,
+            metrics_listen: None,
             metrics_whitelist: default_metrics_whitelist(),
             api: ApiConfig::default(),
             listeners: Vec::new(),
+            listen_backlog: default_listen_backlog(),
+            max_connections: default_server_max_connections(),
+            accept_permit_timeout_ms: default_accept_permit_timeout_ms(),
+            conntrack_control: ConntrackControlConfig::default(),
         }
     }
 }
 
 #[derive(Debug, Clone, Serialize, Deserialize)]
 pub struct TimeoutsConfig {
+    /// Maximum idle wait in seconds for the first client byte before handshake parsing starts.
+    /// `0` disables the separate idle phase and keeps legacy timeout behavior.
+    #[serde(default = "default_client_first_byte_idle_secs")]
+    pub client_first_byte_idle_secs: u64,
+
+    /// Maximum active handshake duration in seconds after the first client byte is received.
     #[serde(default = "default_handshake_timeout")]
     pub client_handshake: u64,
 
-    #[serde(default = "default_connect_timeout")]
-    pub tg_connect: u64,
+    /// Enables soft/hard relay client idle policy for middle-relay sessions.
+    #[serde(default = "default_relay_idle_policy_v2_enabled")]
+    pub relay_idle_policy_v2_enabled: bool,
+
+    /// Soft idle threshold for middle-relay client uplink activity in seconds.
+    /// Hitting this threshold marks the session as idle-candidate, but does not close it.
+    #[serde(default = "default_relay_client_idle_soft_secs")]
+    pub relay_client_idle_soft_secs: u64,
+
+    /// Hard idle threshold for middle-relay client uplink activity in seconds.
+    /// Hitting this threshold closes the session.
+    #[serde(default = "default_relay_client_idle_hard_secs")]
+    pub relay_client_idle_hard_secs: u64,
+
+    /// Additional grace in seconds added to hard idle window after recent downstream activity.
+    #[serde(default = "default_relay_idle_grace_after_downstream_activity_secs")]
+    pub relay_idle_grace_after_downstream_activity_secs: u64,
 
     #[serde(default = "default_keepalive")]
     pub client_keepalive: u64,
@@ -1019,8 +1481,13 @@ pub struct TimeoutsConfig {
 impl Default for TimeoutsConfig {
     fn default() -> Self {
         Self {
+            client_first_byte_idle_secs: default_client_first_byte_idle_secs(),
             client_handshake: default_handshake_timeout(),
-            tg_connect: default_connect_timeout(),
+            relay_idle_policy_v2_enabled: default_relay_idle_policy_v2_enabled(),
+            relay_client_idle_soft_secs: default_relay_client_idle_soft_secs(),
+            relay_client_idle_hard_secs: default_relay_client_idle_hard_secs(),
+            relay_idle_grace_after_downstream_activity_secs:
+                default_relay_idle_grace_after_downstream_activity_secs(),
             client_keepalive: default_keepalive(),
             client_ack: default_ack_timeout(),
             me_one_retry: default_me_one_retry(),
@@ -1029,6 +1496,91 @@ impl Default for TimeoutsConfig {
     }
 }
 
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
+#[serde(rename_all = "lowercase")]
+pub enum UnknownSniAction {
+    #[default]
+    Drop,
+    Mask,
+    Accept,
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash, Serialize, Deserialize)]
+#[serde(rename_all = "snake_case")]
+pub enum TlsFetchProfile {
+    ModernChromeLike,
+    ModernFirefoxLike,
+    CompatTls12,
+    LegacyMinimal,
+}
+
+impl TlsFetchProfile {
+    pub fn as_str(self) -> &'static str {
+        match self {
+            TlsFetchProfile::ModernChromeLike => "modern_chrome_like",
+            TlsFetchProfile::ModernFirefoxLike => "modern_firefox_like",
+            TlsFetchProfile::CompatTls12 => "compat_tls12",
+            TlsFetchProfile::LegacyMinimal => "legacy_minimal",
+        }
+    }
+}
+
+fn default_tls_fetch_profiles() -> Vec<TlsFetchProfile> {
+    vec![
+        TlsFetchProfile::ModernChromeLike,
+        TlsFetchProfile::ModernFirefoxLike,
+        TlsFetchProfile::CompatTls12,
+        TlsFetchProfile::LegacyMinimal,
+    ]
+}
+
+#[derive(Debug, Clone, Serialize, Deserialize)]
+pub struct TlsFetchConfig {
+    /// Ordered list of ClientHello profiles used for adaptive fallback.
+    #[serde(default = "default_tls_fetch_profiles")]
+    pub profiles: Vec<TlsFetchProfile>,
+
+    /// When true and upstream route is configured, TLS fetch fails closed on
+    /// upstream connect errors and does not fallback to direct TCP.
+    #[serde(default = "default_tls_fetch_strict_route")]
+    pub strict_route: bool,
+
+    /// Timeout per one profile attempt in milliseconds.
+    #[serde(default = "default_tls_fetch_attempt_timeout_ms")]
+    pub attempt_timeout_ms: u64,
+
+    /// Total wall-clock budget in milliseconds across all profile attempts.
+    #[serde(default = "default_tls_fetch_total_budget_ms")]
+    pub total_budget_ms: u64,
+
+    /// Adds GREASE-style values into selected ClientHello extensions.
+    #[serde(default)]
+    pub grease_enabled: bool,
+
+    /// Produces deterministic ClientHello randomness for debugging/tests.
+    #[serde(default)]
+    pub deterministic: bool,
+
+    /// TTL for winner-profile cache entries in seconds.
+    /// Set to 0 to disable profile cache.
+    #[serde(default = "default_tls_fetch_profile_cache_ttl_secs")]
+    pub profile_cache_ttl_secs: u64,
+}
+
+impl Default for TlsFetchConfig {
+    fn default() -> Self {
+        Self {
+            profiles: default_tls_fetch_profiles(),
+            strict_route: default_tls_fetch_strict_route(),
+            attempt_timeout_ms: default_tls_fetch_attempt_timeout_ms(),
+            total_budget_ms: default_tls_fetch_total_budget_ms(),
+            grease_enabled: false,
+            deterministic: false,
+            profile_cache_ttl_secs: default_tls_fetch_profile_cache_ttl_secs(),
+        }
+    }
+}
+
 #[derive(Debug, Clone, Serialize, Deserialize)]
 pub struct AntiCensorshipConfig {
     #[serde(default = "default_tls_domain")]
@@ -1038,6 +1590,19 @@ pub struct AntiCensorshipConfig {
     #[serde(default)]
     pub tls_domains: Vec<String>,
 
+    /// Policy for TLS ClientHello with unknown (non-configured) SNI.
+    #[serde(default)]
+    pub unknown_sni_action: UnknownSniAction,
+
+    /// Upstream scope used for TLS front metadata fetches.
+    /// Empty value keeps default upstream routing behavior.
+    #[serde(default = "default_tls_fetch_scope")]
+    pub tls_fetch_scope: String,
+
+    /// Fetch strategy for TLS front metadata bootstrap and periodic refresh.
+    #[serde(default)]
+    pub tls_fetch: TlsFetchConfig,
+
     #[serde(default = "default_true")]
     pub mask: bool,
 
@@ -1088,6 +1653,54 @@ pub struct AntiCensorshipConfig {
     /// Allows the backend to see the real client IP.
     #[serde(default)]
     pub mask_proxy_protocol: u8,
+
+    /// Enable shape-channel hardening on mask backend path by padding
+    /// client->mask stream tail to configured buckets on stream end.
+    #[serde(default = "default_mask_shape_hardening")]
+    pub mask_shape_hardening: bool,
+
+    /// Opt-in aggressive shape hardening mode.
+    /// When enabled, masking may shape some backend-silent timeout paths and
+    /// enforces strictly positive above-cap blur when blur is enabled.
+    #[serde(default = "default_mask_shape_hardening_aggressive_mode")]
+    pub mask_shape_hardening_aggressive_mode: bool,
+
+    /// Minimum bucket size for mask shape hardening padding.
+    #[serde(default = "default_mask_shape_bucket_floor_bytes")]
+    pub mask_shape_bucket_floor_bytes: usize,
+
+    /// Maximum bucket size for mask shape hardening padding.
+    #[serde(default = "default_mask_shape_bucket_cap_bytes")]
+    pub mask_shape_bucket_cap_bytes: usize,
+
+    /// Add bounded random tail bytes even when total bytes already exceed
+    /// mask_shape_bucket_cap_bytes.
+    #[serde(default = "default_mask_shape_above_cap_blur")]
+    pub mask_shape_above_cap_blur: bool,
+
+    /// Maximum random bytes appended above cap when above-cap blur is enabled.
+    #[serde(default = "default_mask_shape_above_cap_blur_max_bytes")]
+    pub mask_shape_above_cap_blur_max_bytes: usize,
+
+    /// Maximum bytes relayed per direction on unauthenticated masking fallback paths.
+    #[serde(default = "default_mask_relay_max_bytes")]
+    pub mask_relay_max_bytes: usize,
+
+    /// Prefetch timeout (ms) for extending fragmented masking classifier window.
+    #[serde(default = "default_mask_classifier_prefetch_timeout_ms")]
+    pub mask_classifier_prefetch_timeout_ms: u64,
+
+    /// Enable outcome-time normalization envelope for masking fallback.
+    #[serde(default = "default_mask_timing_normalization_enabled")]
+    pub mask_timing_normalization_enabled: bool,
+
+    /// Lower bound (ms) for masking outcome timing envelope.
+    #[serde(default = "default_mask_timing_normalization_floor_ms")]
+    pub mask_timing_normalization_floor_ms: u64,
+
+    /// Upper bound (ms) for masking outcome timing envelope.
+    #[serde(default = "default_mask_timing_normalization_ceiling_ms")]
+    pub mask_timing_normalization_ceiling_ms: u64,
 }
 
 impl Default for AntiCensorshipConfig {
@@ -1095,6 +1708,9 @@ impl Default for AntiCensorshipConfig {
         Self {
             tls_domain: default_tls_domain(),
             tls_domains: Vec::new(),
+            unknown_sni_action: UnknownSniAction::Drop,
+            tls_fetch_scope: default_tls_fetch_scope(),
+            tls_fetch: TlsFetchConfig::default(),
             mask: default_true(),
             mask_host: None,
             mask_port: default_mask_port(),
@@ -1108,6 +1724,17 @@ impl Default for AntiCensorshipConfig {
             tls_full_cert_ttl_secs: default_tls_full_cert_ttl_secs(),
             alpn_enforce: default_alpn_enforce(),
             mask_proxy_protocol: 0,
+            mask_shape_hardening: default_mask_shape_hardening(),
+            mask_shape_hardening_aggressive_mode: default_mask_shape_hardening_aggressive_mode(),
+            mask_shape_bucket_floor_bytes: default_mask_shape_bucket_floor_bytes(),
+            mask_shape_bucket_cap_bytes: default_mask_shape_bucket_cap_bytes(),
+            mask_shape_above_cap_blur: default_mask_shape_above_cap_blur(),
+            mask_shape_above_cap_blur_max_bytes: default_mask_shape_above_cap_blur_max_bytes(),
+            mask_relay_max_bytes: default_mask_relay_max_bytes(),
+            mask_classifier_prefetch_timeout_ms: default_mask_classifier_prefetch_timeout_ms(),
+            mask_timing_normalization_enabled: default_mask_timing_normalization_enabled(),
+            mask_timing_normalization_floor_ms: default_mask_timing_normalization_floor_ms(),
+            mask_timing_normalization_ceiling_ms: default_mask_timing_normalization_ceiling_ms(),
         }
     }
 }
@@ -1124,6 +1751,12 @@ pub struct AccessConfig {
     #[serde(default)]
     pub user_max_tcp_conns: HashMap<String, usize>,
 
+    /// Global per-user TCP connection limit applied when a user has no
+    /// positive individual override.
+    /// `0` disables the inherited limit.
+    #[serde(default = "default_user_max_tcp_conns_global_each")]
+    pub user_max_tcp_conns_global_each: usize,
+
     #[serde(default)]
     pub user_expirations: HashMap<String, DateTime<Utc>>,
 
@@ -1133,6 +1766,11 @@ pub struct AccessConfig {
     #[serde(default)]
     pub user_max_unique_ips: HashMap<String, usize>,
 
+    /// Global per-user unique IP limit applied when a user has no individual override.
+    /// `0` disables the inherited limit.
+    #[serde(default = "default_user_max_unique_ips_global_each")]
+    pub user_max_unique_ips_global_each: usize,
+
     #[serde(default)]
     pub user_max_unique_ips_mode: UserMaxUniqueIpsMode,
 
@@ -1155,9 +1793,11 @@ impl Default for AccessConfig {
             users: default_access_users(),
             user_ad_tags: HashMap::new(),
             user_max_tcp_conns: HashMap::new(),
+            user_max_tcp_conns_global_each: default_user_max_tcp_conns_global_each(),
             user_expirations: HashMap::new(),
             user_data_quota: HashMap::new(),
             user_max_unique_ips: HashMap::new(),
+            user_max_unique_ips_global_each: default_user_max_unique_ips_global_each(),
             user_max_unique_ips_mode: UserMaxUniqueIpsMode::default(),
             user_max_unique_ips_window_secs: default_user_max_unique_ips_window_secs(),
             replay_check_len: default_replay_check_len(),
@@ -1194,6 +1834,11 @@ pub enum UpstreamType {
         #[serde(default)]
         password: Option<String>,
     },
+    Shadowsocks {
+        url: String,
+        #[serde(default)]
+        interface: Option<String>,
+    },
 }
 
 #[derive(Debug, Clone, Serialize, Deserialize)]
@@ -1274,7 +1919,10 @@ impl ShowLink {
 }
 
 impl Serialize for ShowLink {
-    fn serialize<S: serde::Serializer>(&self, serializer: S) -> std::result::Result<S::Ok, S::Error> {
+    fn serialize<S: serde::Serializer>(
+        &self,
+        serializer: S,
+    ) -> std::result::Result<S::Ok, S::Error> {
         match self {
             ShowLink::None => Vec::<String>::new().serialize(serializer),
             ShowLink::All => serializer.serialize_str("*"),
@@ -1284,7 +1932,9 @@ impl Serialize for ShowLink {
 }
 
 impl<'de> Deserialize<'de> for ShowLink {
-    fn deserialize<D: serde::Deserializer<'de>>(deserializer: D) -> std::result::Result<Self, D::Error> {
+    fn deserialize<D: serde::Deserializer<'de>>(
+        deserializer: D,
+    ) -> std::result::Result<Self, D::Error> {
         use serde::de;
 
         struct ShowLinkVisitor;
@@ -1300,14 +1950,14 @@ impl<'de> Deserialize<'de> for ShowLink {
                 if v == "*" {
                     Ok(ShowLink::All)
                 } else {
-                    Err(de::Error::invalid_value(
-                        de::Unexpected::Str(v),
-                        &r#""*""#,
-                    ))
+                    Err(de::Error::invalid_value(de::Unexpected::Str(v), &r#""*""#))
                 }
             }
 
-            fn visit_seq<A: de::SeqAccess<'de>>(self, mut seq: A) -> std::result::Result<ShowLink, A::Error> {
+            fn visit_seq<A: de::SeqAccess<'de>>(
+                self,
+                mut seq: A,
+            ) -> std::result::Result<ShowLink, A::Error> {
                 let mut names = Vec::new();
                 while let Some(name) = seq.next_element::<String>()? {
                     names.push(name);

src/conntrack_control.rs

@@ -0,0 +1,755 @@
+use std::collections::BTreeSet;
+use std::net::IpAddr;
+use std::path::PathBuf;
+use std::sync::Arc;
+use std::time::Duration;
+
+use tokio::io::AsyncWriteExt;
+use tokio::process::Command;
+use tokio::sync::{mpsc, watch};
+use tracing::{debug, info, warn};
+
+use crate::config::{ConntrackBackend, ConntrackMode, ProxyConfig};
+use crate::proxy::middle_relay::note_global_relay_pressure;
+use crate::proxy::shared_state::{ConntrackCloseEvent, ConntrackCloseReason, ProxySharedState};
+use crate::stats::Stats;
+
+const CONNTRACK_EVENT_QUEUE_CAPACITY: usize = 32_768;
+const PRESSURE_RELEASE_TICKS: u8 = 3;
+const PRESSURE_SAMPLE_INTERVAL: Duration = Duration::from_secs(1);
+
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+enum NetfilterBackend {
+    Nftables,
+    Iptables,
+}
+
+#[derive(Clone, Copy)]
+struct PressureSample {
+    conn_pct: Option<u8>,
+    fd_pct: Option<u8>,
+    accept_timeout_delta: u64,
+    me_queue_pressure_delta: u64,
+}
+
+struct PressureState {
+    active: bool,
+    low_streak: u8,
+    prev_accept_timeout_total: u64,
+    prev_me_queue_pressure_total: u64,
+}
+
+impl PressureState {
+    fn new(stats: &Stats) -> Self {
+        Self {
+            active: false,
+            low_streak: 0,
+            prev_accept_timeout_total: stats.get_accept_permit_timeout_total(),
+            prev_me_queue_pressure_total: stats.get_me_c2me_send_full_total(),
+        }
+    }
+}
+
+pub(crate) fn spawn_conntrack_controller(
+    config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    stats: Arc<Stats>,
+    shared: Arc<ProxySharedState>,
+) {
+    if !cfg!(target_os = "linux") {
+        let enabled = config_rx
+            .borrow()
+            .server
+            .conntrack_control
+            .inline_conntrack_control;
+        stats.set_conntrack_control_enabled(enabled);
+        stats.set_conntrack_control_available(false);
+        stats.set_conntrack_pressure_active(false);
+        stats.set_conntrack_event_queue_depth(0);
+        stats.set_conntrack_rule_apply_ok(false);
+        shared.disable_conntrack_close_sender();
+        shared.set_conntrack_pressure_active(false);
+        if enabled {
+            warn!(
+                "conntrack control is configured but unsupported on this OS; disabling runtime worker"
+            );
+        }
+        return;
+    }
+
+    let (tx, rx) = mpsc::channel(CONNTRACK_EVENT_QUEUE_CAPACITY);
+    shared.set_conntrack_close_sender(tx);
+    tokio::spawn(async move {
+        run_conntrack_controller(config_rx, stats, shared, rx).await;
+    });
+}
+
+async fn run_conntrack_controller(
+    mut config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    stats: Arc<Stats>,
+    shared: Arc<ProxySharedState>,
+    mut close_rx: mpsc::Receiver<ConntrackCloseEvent>,
+) {
+    let mut cfg = config_rx.borrow().clone();
+    let mut pressure_state = PressureState::new(stats.as_ref());
+    let mut delete_budget_tokens = cfg.server.conntrack_control.delete_budget_per_sec;
+    let mut backend = pick_backend(cfg.server.conntrack_control.backend);
+
+    apply_runtime_state(
+        stats.as_ref(),
+        shared.as_ref(),
+        &cfg,
+        backend.is_some(),
+        false,
+    );
+    reconcile_rules(&cfg, backend, stats.as_ref()).await;
+
+    loop {
+        tokio::select! {
+            changed = config_rx.changed() => {
+                if changed.is_err() {
+                    break;
+                }
+                cfg = config_rx.borrow_and_update().clone();
+                backend = pick_backend(cfg.server.conntrack_control.backend);
+                delete_budget_tokens = cfg.server.conntrack_control.delete_budget_per_sec;
+                apply_runtime_state(stats.as_ref(), shared.as_ref(), &cfg, backend.is_some(), pressure_state.active);
+                reconcile_rules(&cfg, backend, stats.as_ref()).await;
+            }
+            event = close_rx.recv() => {
+                let Some(event) = event else {
+                    break;
+                };
+                stats.set_conntrack_event_queue_depth(close_rx.len() as u64);
+                if !cfg.server.conntrack_control.inline_conntrack_control {
+                    continue;
+                }
+                if !pressure_state.active {
+                    continue;
+                }
+                if !matches!(event.reason, ConntrackCloseReason::Timeout | ConntrackCloseReason::Pressure | ConntrackCloseReason::Reset) {
+                    continue;
+                }
+                if delete_budget_tokens == 0 {
+                    continue;
+                }
+                stats.increment_conntrack_delete_attempt_total();
+                match delete_conntrack_entry(event).await {
+                    DeleteOutcome::Deleted => {
+                        delete_budget_tokens = delete_budget_tokens.saturating_sub(1);
+                        stats.increment_conntrack_delete_success_total();
+                    }
+                    DeleteOutcome::NotFound => {
+                        delete_budget_tokens = delete_budget_tokens.saturating_sub(1);
+                        stats.increment_conntrack_delete_not_found_total();
+                    }
+                    DeleteOutcome::Error => {
+                        delete_budget_tokens = delete_budget_tokens.saturating_sub(1);
+                        stats.increment_conntrack_delete_error_total();
+                    }
+                }
+            }
+            _ = tokio::time::sleep(PRESSURE_SAMPLE_INTERVAL) => {
+                delete_budget_tokens = cfg.server.conntrack_control.delete_budget_per_sec;
+                stats.set_conntrack_event_queue_depth(close_rx.len() as u64);
+                let sample = collect_pressure_sample(stats.as_ref(), &cfg, &mut pressure_state);
+                update_pressure_state(
+                    stats.as_ref(),
+                    shared.as_ref(),
+                    &cfg,
+                    &sample,
+                    &mut pressure_state,
+                );
+                if pressure_state.active {
+                    note_global_relay_pressure(shared.as_ref());
+                }
+            }
+        }
+    }
+
+    shared.disable_conntrack_close_sender();
+    shared.set_conntrack_pressure_active(false);
+    stats.set_conntrack_pressure_active(false);
+}
+
+fn apply_runtime_state(
+    stats: &Stats,
+    shared: &ProxySharedState,
+    cfg: &ProxyConfig,
+    backend_available: bool,
+    pressure_active: bool,
+) {
+    let enabled = cfg.server.conntrack_control.inline_conntrack_control;
+    let available = enabled && backend_available && has_cap_net_admin();
+    if enabled && !available {
+        warn!(
+            "conntrack control enabled but unavailable (missing CAP_NET_ADMIN or backend binaries)"
+        );
+    }
+    stats.set_conntrack_control_enabled(enabled);
+    stats.set_conntrack_control_available(available);
+    shared.set_conntrack_pressure_active(enabled && pressure_active);
+    stats.set_conntrack_pressure_active(enabled && pressure_active);
+}
+
+fn collect_pressure_sample(
+    stats: &Stats,
+    cfg: &ProxyConfig,
+    state: &mut PressureState,
+) -> PressureSample {
+    let current_connections = stats.get_current_connections_total();
+    let conn_pct = if cfg.server.max_connections == 0 {
+        None
+    } else {
+        Some(
+            ((current_connections.saturating_mul(100)) / u64::from(cfg.server.max_connections))
+                .min(100) as u8,
+        )
+    };
+
+    let fd_pct = fd_usage_pct();
+
+    let accept_total = stats.get_accept_permit_timeout_total();
+    let accept_delta = accept_total.saturating_sub(state.prev_accept_timeout_total);
+    state.prev_accept_timeout_total = accept_total;
+
+    let me_total = stats.get_me_c2me_send_full_total();
+    let me_delta = me_total.saturating_sub(state.prev_me_queue_pressure_total);
+    state.prev_me_queue_pressure_total = me_total;
+
+    PressureSample {
+        conn_pct,
+        fd_pct,
+        accept_timeout_delta: accept_delta,
+        me_queue_pressure_delta: me_delta,
+    }
+}
+
+fn update_pressure_state(
+    stats: &Stats,
+    shared: &ProxySharedState,
+    cfg: &ProxyConfig,
+    sample: &PressureSample,
+    state: &mut PressureState,
+) {
+    if !cfg.server.conntrack_control.inline_conntrack_control {
+        if state.active {
+            state.active = false;
+            state.low_streak = 0;
+            shared.set_conntrack_pressure_active(false);
+            stats.set_conntrack_pressure_active(false);
+            info!("Conntrack pressure mode deactivated (feature disabled)");
+        }
+        return;
+    }
+
+    let high = cfg.server.conntrack_control.pressure_high_watermark_pct;
+    let low = cfg.server.conntrack_control.pressure_low_watermark_pct;
+
+    let high_hit = sample.conn_pct.is_some_and(|v| v >= high)
+        || sample.fd_pct.is_some_and(|v| v >= high)
+        || sample.accept_timeout_delta > 0
+        || sample.me_queue_pressure_delta > 0;
+
+    let low_clear = sample.conn_pct.is_none_or(|v| v <= low)
+        && sample.fd_pct.is_none_or(|v| v <= low)
+        && sample.accept_timeout_delta == 0
+        && sample.me_queue_pressure_delta == 0;
+
+    if !state.active && high_hit {
+        state.active = true;
+        state.low_streak = 0;
+        shared.set_conntrack_pressure_active(true);
+        stats.set_conntrack_pressure_active(true);
+        info!(
+            conn_pct = ?sample.conn_pct,
+            fd_pct = ?sample.fd_pct,
+            accept_timeout_delta = sample.accept_timeout_delta,
+            me_queue_pressure_delta = sample.me_queue_pressure_delta,
+            "Conntrack pressure mode activated"
+        );
+        return;
+    }
+
+    if state.active && low_clear {
+        state.low_streak = state.low_streak.saturating_add(1);
+        if state.low_streak >= PRESSURE_RELEASE_TICKS {
+            state.active = false;
+            state.low_streak = 0;
+            shared.set_conntrack_pressure_active(false);
+            stats.set_conntrack_pressure_active(false);
+            info!("Conntrack pressure mode deactivated");
+        }
+        return;
+    }
+
+    state.low_streak = 0;
+}
+
+async fn reconcile_rules(cfg: &ProxyConfig, backend: Option<NetfilterBackend>, stats: &Stats) {
+    if !cfg.server.conntrack_control.inline_conntrack_control {
+        clear_notrack_rules_all_backends().await;
+        stats.set_conntrack_rule_apply_ok(true);
+        return;
+    }
+
+    if !has_cap_net_admin() {
+        stats.set_conntrack_rule_apply_ok(false);
+        return;
+    }
+
+    let Some(backend) = backend else {
+        stats.set_conntrack_rule_apply_ok(false);
+        return;
+    };
+
+    let apply_result = match backend {
+        NetfilterBackend::Nftables => apply_nft_rules(cfg).await,
+        NetfilterBackend::Iptables => apply_iptables_rules(cfg).await,
+    };
+
+    if let Err(error) = apply_result {
+        warn!(error = %error, "Failed to reconcile conntrack/notrack rules");
+        stats.set_conntrack_rule_apply_ok(false);
+    } else {
+        stats.set_conntrack_rule_apply_ok(true);
+    }
+}
+
+fn pick_backend(configured: ConntrackBackend) -> Option<NetfilterBackend> {
+    match configured {
+        ConntrackBackend::Auto => {
+            if command_exists("nft") {
+                Some(NetfilterBackend::Nftables)
+            } else if command_exists("iptables") {
+                Some(NetfilterBackend::Iptables)
+            } else {
+                None
+            }
+        }
+        ConntrackBackend::Nftables => command_exists("nft").then_some(NetfilterBackend::Nftables),
+        ConntrackBackend::Iptables => {
+            command_exists("iptables").then_some(NetfilterBackend::Iptables)
+        }
+    }
+}
+
+fn command_exists(binary: &str) -> bool {
+    let Some(path_var) = std::env::var_os("PATH") else {
+        return false;
+    };
+    std::env::split_paths(&path_var).any(|dir| {
+        let candidate: PathBuf = dir.join(binary);
+        candidate.exists() && candidate.is_file()
+    })
+}
+
+fn notrack_targets(cfg: &ProxyConfig) -> (Vec<Option<IpAddr>>, Vec<Option<IpAddr>>) {
+    let mode = cfg.server.conntrack_control.mode;
+    let mut v4_targets: BTreeSet<Option<IpAddr>> = BTreeSet::new();
+    let mut v6_targets: BTreeSet<Option<IpAddr>> = BTreeSet::new();
+
+    match mode {
+        ConntrackMode::Tracked => {}
+        ConntrackMode::Notrack => {
+            if cfg.server.listeners.is_empty() {
+                if let Some(ipv4) = cfg
+                    .server
+                    .listen_addr_ipv4
+                    .as_ref()
+                    .and_then(|s| s.parse::<IpAddr>().ok())
+                {
+                    if ipv4.is_unspecified() {
+                        v4_targets.insert(None);
+                    } else {
+                        v4_targets.insert(Some(ipv4));
+                    }
+                }
+                if let Some(ipv6) = cfg
+                    .server
+                    .listen_addr_ipv6
+                    .as_ref()
+                    .and_then(|s| s.parse::<IpAddr>().ok())
+                {
+                    if ipv6.is_unspecified() {
+                        v6_targets.insert(None);
+                    } else {
+                        v6_targets.insert(Some(ipv6));
+                    }
+                }
+            } else {
+                for listener in &cfg.server.listeners {
+                    if listener.ip.is_ipv4() {
+                        if listener.ip.is_unspecified() {
+                            v4_targets.insert(None);
+                        } else {
+                            v4_targets.insert(Some(listener.ip));
+                        }
+                    } else if listener.ip.is_unspecified() {
+                        v6_targets.insert(None);
+                    } else {
+                        v6_targets.insert(Some(listener.ip));
+                    }
+                }
+            }
+        }
+        ConntrackMode::Hybrid => {
+            for ip in &cfg.server.conntrack_control.hybrid_listener_ips {
+                if ip.is_ipv4() {
+                    v4_targets.insert(Some(*ip));
+                } else {
+                    v6_targets.insert(Some(*ip));
+                }
+            }
+        }
+    }
+
+    (
+        v4_targets.into_iter().collect(),
+        v6_targets.into_iter().collect(),
+    )
+}
+
+async fn apply_nft_rules(cfg: &ProxyConfig) -> Result<(), String> {
+    let _ = run_command(
+        "nft",
+        &["delete", "table", "inet", "telemt_conntrack"],
+        None,
+    )
+    .await;
+    if matches!(cfg.server.conntrack_control.mode, ConntrackMode::Tracked) {
+        return Ok(());
+    }
+
+    let (v4_targets, v6_targets) = notrack_targets(cfg);
+    let mut rules = Vec::new();
+    for ip in v4_targets {
+        let rule = if let Some(ip) = ip {
+            format!("tcp dport {} ip daddr {} notrack", cfg.server.port, ip)
+        } else {
+            format!("tcp dport {} notrack", cfg.server.port)
+        };
+        rules.push(rule);
+    }
+    for ip in v6_targets {
+        let rule = if let Some(ip) = ip {
+            format!("tcp dport {} ip6 daddr {} notrack", cfg.server.port, ip)
+        } else {
+            format!("tcp dport {} notrack", cfg.server.port)
+        };
+        rules.push(rule);
+    }
+
+    let rule_blob = if rules.is_empty() {
+        String::new()
+    } else {
+        format!("    {}\n", rules.join("\n    "))
+    };
+    let script = format!(
+        "table inet telemt_conntrack {{\n  chain preraw {{\n    type filter hook prerouting priority raw; policy accept;\n{rule_blob}  }}\n}}\n"
+    );
+    run_command("nft", &["-f", "-"], Some(script)).await
+}
+
+async fn apply_iptables_rules(cfg: &ProxyConfig) -> Result<(), String> {
+    apply_iptables_rules_for_binary("iptables", cfg, true).await?;
+    apply_iptables_rules_for_binary("ip6tables", cfg, false).await?;
+    Ok(())
+}
+
+async fn apply_iptables_rules_for_binary(
+    binary: &str,
+    cfg: &ProxyConfig,
+    ipv4: bool,
+) -> Result<(), String> {
+    if !command_exists(binary) {
+        return Ok(());
+    }
+    let chain = "TELEMT_NOTRACK";
+    let _ = run_command(
+        binary,
+        &["-t", "raw", "-D", "PREROUTING", "-j", chain],
+        None,
+    )
+    .await;
+    let _ = run_command(binary, &["-t", "raw", "-F", chain], None).await;
+    let _ = run_command(binary, &["-t", "raw", "-X", chain], None).await;
+
+    if matches!(cfg.server.conntrack_control.mode, ConntrackMode::Tracked) {
+        return Ok(());
+    }
+
+    run_command(binary, &["-t", "raw", "-N", chain], None).await?;
+    run_command(binary, &["-t", "raw", "-F", chain], None).await?;
+    if run_command(
+        binary,
+        &["-t", "raw", "-C", "PREROUTING", "-j", chain],
+        None,
+    )
+    .await
+    .is_err()
+    {
+        run_command(
+            binary,
+            &["-t", "raw", "-I", "PREROUTING", "1", "-j", chain],
+            None,
+        )
+        .await?;
+    }
+
+    let (v4_targets, v6_targets) = notrack_targets(cfg);
+    let selected = if ipv4 { v4_targets } else { v6_targets };
+    for ip in selected {
+        let mut args = vec![
+            "-t".to_string(),
+            "raw".to_string(),
+            "-A".to_string(),
+            chain.to_string(),
+            "-p".to_string(),
+            "tcp".to_string(),
+            "--dport".to_string(),
+            cfg.server.port.to_string(),
+        ];
+        if let Some(ip) = ip {
+            args.push("-d".to_string());
+            args.push(ip.to_string());
+        }
+        args.push("-j".to_string());
+        args.push("CT".to_string());
+        args.push("--notrack".to_string());
+        let arg_refs: Vec<&str> = args.iter().map(String::as_str).collect();
+        run_command(binary, &arg_refs, None).await?;
+    }
+    Ok(())
+}
+
+async fn clear_notrack_rules_all_backends() {
+    let _ = run_command(
+        "nft",
+        &["delete", "table", "inet", "telemt_conntrack"],
+        None,
+    )
+    .await;
+    let _ = run_command(
+        "iptables",
+        &["-t", "raw", "-D", "PREROUTING", "-j", "TELEMT_NOTRACK"],
+        None,
+    )
+    .await;
+    let _ = run_command("iptables", &["-t", "raw", "-F", "TELEMT_NOTRACK"], None).await;
+    let _ = run_command("iptables", &["-t", "raw", "-X", "TELEMT_NOTRACK"], None).await;
+    let _ = run_command(
+        "ip6tables",
+        &["-t", "raw", "-D", "PREROUTING", "-j", "TELEMT_NOTRACK"],
+        None,
+    )
+    .await;
+    let _ = run_command("ip6tables", &["-t", "raw", "-F", "TELEMT_NOTRACK"], None).await;
+    let _ = run_command("ip6tables", &["-t", "raw", "-X", "TELEMT_NOTRACK"], None).await;
+}
+
+enum DeleteOutcome {
+    Deleted,
+    NotFound,
+    Error,
+}
+
+async fn delete_conntrack_entry(event: ConntrackCloseEvent) -> DeleteOutcome {
+    if !command_exists("conntrack") {
+        return DeleteOutcome::Error;
+    }
+    let args = vec![
+        "-D".to_string(),
+        "-p".to_string(),
+        "tcp".to_string(),
+        "-s".to_string(),
+        event.src.ip().to_string(),
+        "--sport".to_string(),
+        event.src.port().to_string(),
+        "-d".to_string(),
+        event.dst.ip().to_string(),
+        "--dport".to_string(),
+        event.dst.port().to_string(),
+    ];
+    let arg_refs: Vec<&str> = args.iter().map(String::as_str).collect();
+    match run_command("conntrack", &arg_refs, None).await {
+        Ok(()) => DeleteOutcome::Deleted,
+        Err(error) => {
+            if error.contains("0 flow entries have been deleted") {
+                DeleteOutcome::NotFound
+            } else {
+                debug!(error = %error, "conntrack delete failed");
+                DeleteOutcome::Error
+            }
+        }
+    }
+}
+
+async fn run_command(binary: &str, args: &[&str], stdin: Option<String>) -> Result<(), String> {
+    if !command_exists(binary) {
+        return Err(format!("{binary} is not available"));
+    }
+    let mut command = Command::new(binary);
+    command.args(args);
+    if stdin.is_some() {
+        command.stdin(std::process::Stdio::piped());
+    }
+    command.stdout(std::process::Stdio::null());
+    command.stderr(std::process::Stdio::piped());
+    let mut child = command
+        .spawn()
+        .map_err(|e| format!("spawn {binary} failed: {e}"))?;
+    if let Some(blob) = stdin
+        && let Some(mut writer) = child.stdin.take()
+    {
+        writer
+            .write_all(blob.as_bytes())
+            .await
+            .map_err(|e| format!("stdin write {binary} failed: {e}"))?;
+    }
+    let output = child
+        .wait_with_output()
+        .await
+        .map_err(|e| format!("wait {binary} failed: {e}"))?;
+    if output.status.success() {
+        return Ok(());
+    }
+    let stderr = String::from_utf8_lossy(&output.stderr).trim().to_string();
+    Err(if stderr.is_empty() {
+        format!("{binary} exited with status {}", output.status)
+    } else {
+        stderr
+    })
+}
+
+fn fd_usage_pct() -> Option<u8> {
+    let soft_limit = nofile_soft_limit()?;
+    if soft_limit == 0 {
+        return None;
+    }
+    let fd_count = std::fs::read_dir("/proc/self/fd").ok()?.count() as u64;
+    Some(((fd_count.saturating_mul(100)) / soft_limit).min(100) as u8)
+}
+
+fn nofile_soft_limit() -> Option<u64> {
+    #[cfg(target_os = "linux")]
+    {
+        let mut lim = libc::rlimit {
+            rlim_cur: 0,
+            rlim_max: 0,
+        };
+        let rc = unsafe { libc::getrlimit(libc::RLIMIT_NOFILE, &mut lim) };
+        if rc != 0 {
+            return None;
+        }
+        return Some(lim.rlim_cur);
+    }
+    #[cfg(not(target_os = "linux"))]
+    {
+        None
+    }
+}
+
+fn has_cap_net_admin() -> bool {
+    #[cfg(target_os = "linux")]
+    {
+        let Ok(status) = std::fs::read_to_string("/proc/self/status") else {
+            return false;
+        };
+        for line in status.lines() {
+            if let Some(raw) = line.strip_prefix("CapEff:") {
+                let caps = raw.trim();
+                if let Ok(bits) = u64::from_str_radix(caps, 16) {
+                    const CAP_NET_ADMIN_BIT: u64 = 12;
+                    return (bits & (1u64 << CAP_NET_ADMIN_BIT)) != 0;
+                }
+            }
+        }
+        false
+    }
+    #[cfg(not(target_os = "linux"))]
+    {
+        false
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::config::ProxyConfig;
+
+    #[test]
+    fn pressure_activates_on_accept_timeout_spike() {
+        let stats = Stats::new();
+        let shared = ProxySharedState::new();
+        let mut cfg = ProxyConfig::default();
+        cfg.server.conntrack_control.inline_conntrack_control = true;
+        let mut state = PressureState::new(&stats);
+        let sample = PressureSample {
+            conn_pct: Some(10),
+            fd_pct: Some(10),
+            accept_timeout_delta: 1,
+            me_queue_pressure_delta: 0,
+        };
+
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &sample, &mut state);
+
+        assert!(state.active);
+        assert!(shared.conntrack_pressure_active());
+        assert!(stats.get_conntrack_pressure_active());
+    }
+
+    #[test]
+    fn pressure_releases_after_hysteresis_window() {
+        let stats = Stats::new();
+        let shared = ProxySharedState::new();
+        let mut cfg = ProxyConfig::default();
+        cfg.server.conntrack_control.inline_conntrack_control = true;
+        let mut state = PressureState::new(&stats);
+
+        let high_sample = PressureSample {
+            conn_pct: Some(95),
+            fd_pct: Some(95),
+            accept_timeout_delta: 0,
+            me_queue_pressure_delta: 0,
+        };
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &high_sample, &mut state);
+        assert!(state.active);
+
+        let low_sample = PressureSample {
+            conn_pct: Some(10),
+            fd_pct: Some(10),
+            accept_timeout_delta: 0,
+            me_queue_pressure_delta: 0,
+        };
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &low_sample, &mut state);
+        assert!(state.active);
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &low_sample, &mut state);
+        assert!(state.active);
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &low_sample, &mut state);
+
+        assert!(!state.active);
+        assert!(!shared.conntrack_pressure_active());
+        assert!(!stats.get_conntrack_pressure_active());
+    }
+
+    #[test]
+    fn pressure_does_not_activate_when_disabled() {
+        let stats = Stats::new();
+        let shared = ProxySharedState::new();
+        let mut cfg = ProxyConfig::default();
+        cfg.server.conntrack_control.inline_conntrack_control = false;
+        let mut state = PressureState::new(&stats);
+        let sample = PressureSample {
+            conn_pct: Some(100),
+            fd_pct: Some(100),
+            accept_timeout_delta: 10,
+            me_queue_pressure_delta: 10,
+        };
+
+        update_pressure_state(&stats, shared.as_ref(), &cfg, &sample, &mut state);
+
+        assert!(!state.active);
+        assert!(!shared.conntrack_pressure_active());
+        assert!(!stats.get_conntrack_pressure_active());
+    }
+}

src/crypto/aes.rs

@@ -13,10 +13,13 @@
 
 #![allow(dead_code)]
 
-use aes::Aes256;
-use ctr::{Ctr128BE, cipher::{KeyIvInit, StreamCipher}};
-use zeroize::Zeroize;
 use crate::error::{ProxyError, Result};
+use aes::Aes256;
+use ctr::{
+    Ctr128BE,
+    cipher::{KeyIvInit, StreamCipher},
+};
+use zeroize::Zeroize;
 
 type Aes256Ctr = Ctr128BE<Aes256>;
 
@@ -46,10 +49,16 @@ impl AesCtr {
     /// Create from key and IV slices
     pub fn from_key_iv(key: &[u8], iv: &[u8]) -> Result<Self> {
         if key.len() != 32 {
-            return Err(ProxyError::InvalidKeyLength { expected: 32, got: key.len() });
+            return Err(ProxyError::InvalidKeyLength {
+                expected: 32,
+                got: key.len(),
+            });
         }
         if iv.len() != 16 {
-            return Err(ProxyError::InvalidKeyLength { expected: 16, got: iv.len() });
+            return Err(ProxyError::InvalidKeyLength {
+                expected: 16,
+                got: iv.len(),
+            });
         }
 
         let key: [u8; 32] = key.try_into().unwrap();
@@ -108,10 +117,16 @@ impl AesCbc {
     /// Create from slices
     pub fn from_slices(key: &[u8], iv: &[u8]) -> Result<Self> {
         if key.len() != 32 {
-            return Err(ProxyError::InvalidKeyLength { expected: 32, got: key.len() });
+            return Err(ProxyError::InvalidKeyLength {
+                expected: 32,
+                got: key.len(),
+            });
         }
         if iv.len() != 16 {
-            return Err(ProxyError::InvalidKeyLength { expected: 16, got: iv.len() });
+            return Err(ProxyError::InvalidKeyLength {
+                expected: 16,
+                got: iv.len(),
+            });
         }
 
         Ok(Self {
@@ -150,9 +165,10 @@ impl AesCbc {
     /// CBC Encryption: C[i] = AES_Encrypt(P[i] XOR C[i-1]), where C[-1] = IV
     pub fn encrypt(&self, data: &[u8]) -> Result<Vec<u8>> {
         if !data.len().is_multiple_of(Self::BLOCK_SIZE) {
-            return Err(ProxyError::Crypto(
-                format!("CBC data must be aligned to 16 bytes, got {}", data.len())
-            ));
+            return Err(ProxyError::Crypto(format!(
+                "CBC data must be aligned to 16 bytes, got {}",
+                data.len()
+            )));
         }
 
         if data.is_empty() {
@@ -181,9 +197,10 @@ impl AesCbc {
     /// CBC Decryption: P[i] = AES_Decrypt(C[i]) XOR C[i-1], where C[-1] = IV
     pub fn decrypt(&self, data: &[u8]) -> Result<Vec<u8>> {
         if !data.len().is_multiple_of(Self::BLOCK_SIZE) {
-            return Err(ProxyError::Crypto(
-                format!("CBC data must be aligned to 16 bytes, got {}", data.len())
-            ));
+            return Err(ProxyError::Crypto(format!(
+                "CBC data must be aligned to 16 bytes, got {}",
+                data.len()
+            )));
         }
 
         if data.is_empty() {
@@ -210,9 +227,10 @@ impl AesCbc {
     /// Encrypt data in-place
     pub fn encrypt_in_place(&self, data: &mut [u8]) -> Result<()> {
         if !data.len().is_multiple_of(Self::BLOCK_SIZE) {
-            return Err(ProxyError::Crypto(
-                format!("CBC data must be aligned to 16 bytes, got {}", data.len())
-            ));
+            return Err(ProxyError::Crypto(format!(
+                "CBC data must be aligned to 16 bytes, got {}",
+                data.len()
+            )));
         }
 
         if data.is_empty() {
@@ -243,9 +261,10 @@ impl AesCbc {
     /// Decrypt data in-place
     pub fn decrypt_in_place(&self, data: &mut [u8]) -> Result<()> {
         if !data.len().is_multiple_of(Self::BLOCK_SIZE) {
-            return Err(ProxyError::Crypto(
-                format!("CBC data must be aligned to 16 bytes, got {}", data.len())
-            ));
+            return Err(ProxyError::Crypto(format!(
+                "CBC data must be aligned to 16 bytes, got {}",
+                data.len()
+            )));
         }
 
         if data.is_empty() {

src/crypto/hash.rs

@@ -12,10 +12,10 @@
 //! usages are intentional and protocol-mandated.
 
 use hmac::{Hmac, Mac};
-use sha2::Sha256;
 use md5::Md5;
 use sha1::Sha1;
 use sha2::Digest;
+use sha2::Sha256;
 
 type HmacSha256 = Hmac<Sha256>;
 
@@ -28,8 +28,7 @@ pub fn sha256(data: &[u8]) -> [u8; 32] {
 
 /// SHA-256 HMAC
 pub fn sha256_hmac(key: &[u8], data: &[u8]) -> [u8; 32] {
-    let mut mac = HmacSha256::new_from_slice(key)
-        .expect("HMAC accepts any key length");
+    let mut mac = HmacSha256::new_from_slice(key).expect("HMAC accepts any key length");
     mac.update(data);
     mac.finalize().into_bytes().into()
 }
@@ -124,17 +123,8 @@ pub fn derive_middleproxy_keys(
     srv_ipv6: Option<&[u8; 16]>,
 ) -> ([u8; 32], [u8; 16]) {
     let s = build_middleproxy_prekey(
-        nonce_srv,
-        nonce_clt,
-        clt_ts,
-        srv_ip,
-        clt_port,
-        purpose,
-        clt_ip,
-        srv_port,
-        secret,
-        clt_ipv6,
-        srv_ipv6,
+        nonce_srv, nonce_clt, clt_ts, srv_ip, clt_port, purpose, clt_ip, srv_port, secret,
+        clt_ipv6, srv_ipv6,
     );
 
     let md5_1 = md5(&s[1..]);
@@ -164,17 +154,8 @@ mod tests {
         let secret = vec![0x55u8; 128];
 
         let prekey = build_middleproxy_prekey(
-            &nonce_srv,
-            &nonce_clt,
-            &clt_ts,
-            srv_ip,
-            &clt_port,
-            b"CLIENT",
-            clt_ip,
-            &srv_port,
-            &secret,
-            None,
-            None,
+            &nonce_srv, &nonce_clt, &clt_ts, srv_ip, &clt_port, b"CLIENT", clt_ip, &srv_port,
+            &secret, None, None,
         );
         let digest = sha256(&prekey);
         assert_eq!(

src/crypto/mod.rs

@@ -4,7 +4,7 @@ pub mod aes;
 pub mod hash;
 pub mod random;
 
-pub use aes::{AesCtr, AesCbc};
+pub use aes::{AesCbc, AesCtr};
 pub use hash::{
     build_middleproxy_prekey, crc32, crc32c, derive_middleproxy_keys, sha256, sha256_hmac,
 };

src/crypto/random.rs

@@ -3,11 +3,11 @@
 #![allow(deprecated)]
 #![allow(dead_code)]
 
-use rand::{Rng, RngCore, SeedableRng};
-use rand::rngs::StdRng;
-use parking_lot::Mutex;
-use zeroize::Zeroize;
 use crate::crypto::AesCtr;
+use parking_lot::Mutex;
+use rand::rngs::StdRng;
+use rand::{Rng, RngExt, SeedableRng};
+use zeroize::Zeroize;
 
 /// Cryptographically secure PRNG with AES-CTR
 pub struct SecureRandom {
@@ -21,6 +21,7 @@ struct SecureRandomInner {
     rng: StdRng,
     cipher: AesCtr,
     buffer: Vec<u8>,
+    buffer_start: usize,
 }
 
 impl Drop for SecureRandomInner {
@@ -48,6 +49,7 @@ impl SecureRandom {
                 rng,
                 cipher,
                 buffer: Vec::with_capacity(1024),
+                buffer_start: 0,
             }),
         }
     }
@@ -59,16 +61,29 @@ impl SecureRandom {
 
         let mut written = 0usize;
         while written < out.len() {
+            if inner.buffer_start >= inner.buffer.len() {
+                inner.buffer.clear();
+                inner.buffer_start = 0;
+            }
+
             if inner.buffer.is_empty() {
                 let mut chunk = vec![0u8; CHUNK_SIZE];
                 inner.rng.fill_bytes(&mut chunk);
                 inner.cipher.apply(&mut chunk);
                 inner.buffer.extend_from_slice(&chunk);
+                inner.buffer_start = 0;
             }
 
-            let take = (out.len() - written).min(inner.buffer.len());
-            out[written..written + take].copy_from_slice(&inner.buffer[..take]);
-            inner.buffer.drain(..take);
+            let available = inner.buffer.len().saturating_sub(inner.buffer_start);
+            let take = (out.len() - written).min(available);
+            let start = inner.buffer_start;
+            let end = start + take;
+            out[written..written + take].copy_from_slice(&inner.buffer[start..end]);
+            inner.buffer_start = end;
+            if inner.buffer_start >= inner.buffer.len() {
+                inner.buffer.clear();
+                inner.buffer_start = 0;
+            }
             written += take;
         }
     }
@@ -86,7 +101,7 @@ impl SecureRandom {
             return 0;
         }
         let mut inner = self.inner.lock();
-        inner.rng.gen_range(0..max)
+        inner.rng.random_range(0..max)
     }
 
     /// Generate random bits
@@ -126,7 +141,7 @@ impl SecureRandom {
     pub fn shuffle<T>(&self, slice: &mut [T]) {
         let mut inner = self.inner.lock();
         for i in (1..slice.len()).rev() {
-            let j = inner.rng.gen_range(0..=i);
+            let j = inner.rng.random_range(0..=i);
             slice.swap(i, j);
         }
     }

src/daemon/mod.rs

@@ -0,0 +1,577 @@
+//! Unix daemon support for telemt.
+//!
+//! Provides classic Unix daemonization (double-fork), PID file management,
+//! and privilege dropping for running telemt as a background service.
+
+use std::fs::{self, File, OpenOptions};
+use std::io::{self, Read, Write};
+use std::os::unix::fs::OpenOptionsExt;
+use std::path::{Path, PathBuf};
+
+use nix::fcntl::{Flock, FlockArg};
+use nix::unistd::{self, ForkResult, Gid, Pid, Uid, chdir, close, fork, getpid, setsid};
+use tracing::{debug, info, warn};
+
+/// Default PID file location.
+pub const DEFAULT_PID_FILE: &str = "/var/run/telemt.pid";
+
+/// Daemon configuration options parsed from CLI.
+#[derive(Debug, Clone, Default)]
+pub struct DaemonOptions {
+    /// Run as daemon (fork to background).
+    pub daemonize: bool,
+    /// Path to PID file.
+    pub pid_file: Option<PathBuf>,
+    /// User to run as after binding sockets.
+    pub user: Option<String>,
+    /// Group to run as after binding sockets.
+    pub group: Option<String>,
+    /// Working directory for the daemon.
+    pub working_dir: Option<PathBuf>,
+    /// Explicit foreground mode (for systemd Type=simple).
+    pub foreground: bool,
+}
+
+impl DaemonOptions {
+    /// Returns the effective PID file path.
+    pub fn pid_file_path(&self) -> &Path {
+        self.pid_file
+            .as_deref()
+            .unwrap_or(Path::new(DEFAULT_PID_FILE))
+    }
+
+    /// Returns true if we should actually daemonize.
+    /// Foreground flag takes precedence.
+    pub fn should_daemonize(&self) -> bool {
+        self.daemonize && !self.foreground
+    }
+}
+
+/// Error types for daemon operations.
+#[derive(Debug, thiserror::Error)]
+pub enum DaemonError {
+    #[error("fork failed: {0}")]
+    ForkFailed(#[source] nix::Error),
+
+    #[error("setsid failed: {0}")]
+    SetsidFailed(#[source] nix::Error),
+
+    #[error("chdir failed: {0}")]
+    ChdirFailed(#[source] nix::Error),
+
+    #[error("failed to open /dev/null: {0}")]
+    DevNullFailed(#[source] io::Error),
+
+    #[error("failed to redirect stdio: {0}")]
+    RedirectFailed(#[source] nix::Error),
+
+    #[error("PID file error: {0}")]
+    PidFile(String),
+
+    #[error("another instance is already running (pid {0})")]
+    AlreadyRunning(i32),
+
+    #[error("user '{0}' not found")]
+    UserNotFound(String),
+
+    #[error("group '{0}' not found")]
+    GroupNotFound(String),
+
+    #[error("failed to set uid/gid: {0}")]
+    PrivilegeDrop(#[source] nix::Error),
+
+    #[error("io error: {0}")]
+    Io(#[from] io::Error),
+}
+
+/// Result of a successful daemonize() call.
+#[derive(Debug)]
+pub enum DaemonizeResult {
+    /// We are the parent process and should exit.
+    Parent,
+    /// We are the daemon child process and should continue.
+    Child,
+}
+
+/// Performs classic Unix double-fork daemonization.
+///
+/// This detaches the process from the controlling terminal:
+/// 1. First fork - parent exits, child continues
+/// 2. setsid() - become session leader
+/// 3. Second fork - ensure we can never acquire a controlling terminal
+/// 4. chdir("/") - don't hold any directory open
+/// 5. Redirect stdin/stdout/stderr to /dev/null
+///
+/// Returns `DaemonizeResult::Parent` in the original parent (which should exit),
+/// or `DaemonizeResult::Child` in the final daemon child.
+pub fn daemonize(working_dir: Option<&Path>) -> Result<DaemonizeResult, DaemonError> {
+    // First fork
+    match unsafe { fork() } {
+        Ok(ForkResult::Parent { .. }) => {
+            // Parent exits
+            return Ok(DaemonizeResult::Parent);
+        }
+        Ok(ForkResult::Child) => {
+            // Child continues
+        }
+        Err(e) => return Err(DaemonError::ForkFailed(e)),
+    }
+
+    // Create new session, become session leader
+    setsid().map_err(DaemonError::SetsidFailed)?;
+
+    // Second fork to ensure we can never acquire a controlling terminal
+    match unsafe { fork() } {
+        Ok(ForkResult::Parent { .. }) => {
+            // Intermediate parent exits
+            std::process::exit(0);
+        }
+        Ok(ForkResult::Child) => {
+            // Final daemon child continues
+        }
+        Err(e) => return Err(DaemonError::ForkFailed(e)),
+    }
+
+    // Change working directory
+    let target_dir = working_dir.unwrap_or(Path::new("/"));
+    chdir(target_dir).map_err(DaemonError::ChdirFailed)?;
+
+    // Redirect stdin, stdout, stderr to /dev/null
+    redirect_stdio_to_devnull()?;
+
+    Ok(DaemonizeResult::Child)
+}
+
+/// Redirects stdin, stdout, and stderr to /dev/null.
+fn redirect_stdio_to_devnull() -> Result<(), DaemonError> {
+    let devnull = File::options()
+        .read(true)
+        .write(true)
+        .open("/dev/null")
+        .map_err(DaemonError::DevNullFailed)?;
+
+    let devnull_fd = std::os::unix::io::AsRawFd::as_raw_fd(&devnull);
+
+    // Use libc::dup2 directly for redirecting standard file descriptors
+    // nix 0.31's dup2 requires OwnedFd which doesn't work well with stdio fds
+    unsafe {
+        // Redirect stdin (fd 0)
+        if libc::dup2(devnull_fd, 0) < 0 {
+            return Err(DaemonError::RedirectFailed(nix::errno::Errno::last()));
+        }
+        // Redirect stdout (fd 1)
+        if libc::dup2(devnull_fd, 1) < 0 {
+            return Err(DaemonError::RedirectFailed(nix::errno::Errno::last()));
+        }
+        // Redirect stderr (fd 2)
+        if libc::dup2(devnull_fd, 2) < 0 {
+            return Err(DaemonError::RedirectFailed(nix::errno::Errno::last()));
+        }
+    }
+
+    // Close original devnull fd if it's not one of the standard fds
+    if devnull_fd > 2 {
+        let _ = close(devnull_fd);
+    }
+
+    Ok(())
+}
+
+/// PID file manager with flock-based locking.
+pub struct PidFile {
+    path: PathBuf,
+    file: Option<File>,
+    locked: bool,
+}
+
+impl PidFile {
+    /// Creates a new PID file manager for the given path.
+    pub fn new<P: AsRef<Path>>(path: P) -> Self {
+        Self {
+            path: path.as_ref().to_path_buf(),
+            file: None,
+            locked: false,
+        }
+    }
+
+    /// Checks if another instance is already running.
+    ///
+    /// Returns the PID of the running instance if one exists.
+    pub fn check_running(&self) -> Result<Option<i32>, DaemonError> {
+        if !self.path.exists() {
+            return Ok(None);
+        }
+
+        // Try to read existing PID
+        let mut contents = String::new();
+        File::open(&self.path)
+            .and_then(|mut f| f.read_to_string(&mut contents))
+            .map_err(|e| {
+                DaemonError::PidFile(format!("cannot read {}: {}", self.path.display(), e))
+            })?;
+
+        let pid: i32 = contents
+            .trim()
+            .parse()
+            .map_err(|_| DaemonError::PidFile(format!("invalid PID in {}", self.path.display())))?;
+
+        // Check if process is still running
+        if is_process_running(pid) {
+            Ok(Some(pid))
+        } else {
+            // Stale PID file
+            debug!(pid, path = %self.path.display(), "Removing stale PID file");
+            let _ = fs::remove_file(&self.path);
+            Ok(None)
+        }
+    }
+
+    /// Acquires the PID file lock and writes the current PID.
+    ///
+    /// Fails if another instance is already running.
+    pub fn acquire(&mut self) -> Result<(), DaemonError> {
+        // Check for running instance first
+        if let Some(pid) = self.check_running()? {
+            return Err(DaemonError::AlreadyRunning(pid));
+        }
+
+        // Ensure parent directory exists
+        if let Some(parent) = self.path.parent() {
+            if !parent.exists() {
+                fs::create_dir_all(parent).map_err(|e| {
+                    DaemonError::PidFile(format!(
+                        "cannot create directory {}: {}",
+                        parent.display(),
+                        e
+                    ))
+                })?;
+            }
+        }
+
+        // Open/create PID file with exclusive lock
+        let file = OpenOptions::new()
+            .write(true)
+            .create(true)
+            .truncate(true)
+            .mode(0o644)
+            .open(&self.path)
+            .map_err(|e| {
+                DaemonError::PidFile(format!("cannot open {}: {}", self.path.display(), e))
+            })?;
+
+        // Try to acquire exclusive lock (non-blocking)
+        let flock = Flock::lock(file, FlockArg::LockExclusiveNonblock).map_err(|(_, errno)| {
+            // Check if another instance grabbed the lock
+            if let Some(pid) = self.check_running().ok().flatten() {
+                DaemonError::AlreadyRunning(pid)
+            } else {
+                DaemonError::PidFile(format!("cannot lock {}: {}", self.path.display(), errno))
+            }
+        })?;
+
+        // Write our PID
+        let pid = getpid();
+        let mut file = flock
+            .unlock()
+            .map_err(|(_, errno)| DaemonError::PidFile(format!("unlock failed: {}", errno)))?;
+
+        writeln!(file, "{}", pid).map_err(|e| {
+            DaemonError::PidFile(format!(
+                "cannot write PID to {}: {}",
+                self.path.display(),
+                e
+            ))
+        })?;
+
+        // Re-acquire lock and keep it
+        let flock = Flock::lock(file, FlockArg::LockExclusiveNonblock).map_err(|(_, errno)| {
+            DaemonError::PidFile(format!("cannot re-lock {}: {}", self.path.display(), errno))
+        })?;
+
+        self.file = Some(flock.unlock().map_err(|(_, errno)| {
+            DaemonError::PidFile(format!("unlock for storage failed: {}", errno))
+        })?);
+        self.locked = true;
+
+        info!(pid = pid.as_raw(), path = %self.path.display(), "PID file created");
+        Ok(())
+    }
+
+    /// Releases the PID file lock and removes the file.
+    pub fn release(&mut self) -> Result<(), DaemonError> {
+        if let Some(file) = self.file.take() {
+            drop(file);
+        }
+        self.locked = false;
+
+        if self.path.exists() {
+            fs::remove_file(&self.path).map_err(|e| {
+                DaemonError::PidFile(format!("cannot remove {}: {}", self.path.display(), e))
+            })?;
+            debug!(path = %self.path.display(), "PID file removed");
+        }
+
+        Ok(())
+    }
+
+    /// Returns the path to this PID file.
+    #[allow(dead_code)]
+    pub fn path(&self) -> &Path {
+        &self.path
+    }
+}
+
+impl Drop for PidFile {
+    fn drop(&mut self) {
+        if self.locked {
+            if let Err(e) = self.release() {
+                warn!(error = %e, "Failed to clean up PID file on drop");
+            }
+        }
+    }
+}
+
+/// Checks if a process with the given PID is running.
+fn is_process_running(pid: i32) -> bool {
+    // kill(pid, 0) checks if process exists without sending a signal
+    nix::sys::signal::kill(Pid::from_raw(pid), None).is_ok()
+}
+
+/// Drops privileges to the specified user and group.
+///
+/// This should be called after binding privileged ports but before entering
+/// the main event loop.
+pub fn drop_privileges(
+    user: Option<&str>,
+    group: Option<&str>,
+    pid_file: Option<&PidFile>,
+) -> Result<(), DaemonError> {
+    let target_gid = if let Some(group_name) = group {
+        Some(lookup_group(group_name)?)
+    } else if let Some(user_name) = user {
+        Some(lookup_user_primary_gid(user_name)?)
+    } else {
+        None
+    };
+
+    let target_uid = if let Some(user_name) = user {
+        Some(lookup_user(user_name)?)
+    } else {
+        None
+    };
+
+    if (target_uid.is_some() || target_gid.is_some())
+        && let Some(file) = pid_file.and_then(|pid| pid.file.as_ref())
+    {
+        unistd::fchown(file, target_uid, target_gid).map_err(DaemonError::PrivilegeDrop)?;
+    }
+
+    if let Some(gid) = target_gid {
+        unistd::setgid(gid).map_err(DaemonError::PrivilegeDrop)?;
+        unistd::setgroups(&[gid]).map_err(DaemonError::PrivilegeDrop)?;
+        info!(gid = gid.as_raw(), "Dropped group privileges");
+    }
+
+    if let Some(uid) = target_uid {
+        unistd::setuid(uid).map_err(DaemonError::PrivilegeDrop)?;
+        info!(uid = uid.as_raw(), "Dropped user privileges");
+
+        if uid.as_raw() != 0
+            && let Some(pid) = pid_file
+        {
+            let parent = pid.path.parent().unwrap_or(Path::new("."));
+            let probe_path = parent.join(format!(
+                ".telemt_pid_probe_{}_{}",
+                std::process::id(),
+                getpid().as_raw()
+            ));
+            OpenOptions::new()
+                .write(true)
+                .create_new(true)
+                .mode(0o600)
+                .open(&probe_path)
+                .map_err(|e| {
+                    DaemonError::PidFile(format!(
+                        "cannot create probe in PID directory {} as uid {} (pid cleanup will fail): {}",
+                        parent.display(),
+                        uid.as_raw(),
+                        e
+                    ))
+                })?;
+            fs::remove_file(&probe_path).map_err(|e| {
+                DaemonError::PidFile(format!(
+                    "cannot remove probe in PID directory {} as uid {} (pid cleanup will fail): {}",
+                    parent.display(),
+                    uid.as_raw(),
+                    e
+                ))
+            })?;
+        }
+    }
+
+    Ok(())
+}
+
+/// Looks up a user by name and returns their UID.
+fn lookup_user(name: &str) -> Result<Uid, DaemonError> {
+    // Use libc getpwnam
+    let c_name =
+        std::ffi::CString::new(name).map_err(|_| DaemonError::UserNotFound(name.to_string()))?;
+
+    unsafe {
+        let pwd = libc::getpwnam(c_name.as_ptr());
+        if pwd.is_null() {
+            Err(DaemonError::UserNotFound(name.to_string()))
+        } else {
+            Ok(Uid::from_raw((*pwd).pw_uid))
+        }
+    }
+}
+
+/// Looks up a user's primary GID by username.
+fn lookup_user_primary_gid(name: &str) -> Result<Gid, DaemonError> {
+    let c_name =
+        std::ffi::CString::new(name).map_err(|_| DaemonError::UserNotFound(name.to_string()))?;
+
+    unsafe {
+        let pwd = libc::getpwnam(c_name.as_ptr());
+        if pwd.is_null() {
+            Err(DaemonError::UserNotFound(name.to_string()))
+        } else {
+            Ok(Gid::from_raw((*pwd).pw_gid))
+        }
+    }
+}
+
+/// Looks up a group by name and returns its GID.
+fn lookup_group(name: &str) -> Result<Gid, DaemonError> {
+    let c_name =
+        std::ffi::CString::new(name).map_err(|_| DaemonError::GroupNotFound(name.to_string()))?;
+
+    unsafe {
+        let grp = libc::getgrnam(c_name.as_ptr());
+        if grp.is_null() {
+            Err(DaemonError::GroupNotFound(name.to_string()))
+        } else {
+            Ok(Gid::from_raw((*grp).gr_gid))
+        }
+    }
+}
+
+/// Reads PID from a PID file.
+#[allow(dead_code)]
+pub fn read_pid_file<P: AsRef<Path>>(path: P) -> Result<i32, DaemonError> {
+    let path = path.as_ref();
+    let mut contents = String::new();
+    File::open(path)
+        .and_then(|mut f| f.read_to_string(&mut contents))
+        .map_err(|e| DaemonError::PidFile(format!("cannot read {}: {}", path.display(), e)))?;
+
+    contents
+        .trim()
+        .parse()
+        .map_err(|_| DaemonError::PidFile(format!("invalid PID in {}", path.display())))
+}
+
+/// Sends a signal to the process specified in a PID file.
+#[allow(dead_code)]
+pub fn signal_pid_file<P: AsRef<Path>>(
+    path: P,
+    signal: nix::sys::signal::Signal,
+) -> Result<(), DaemonError> {
+    let pid = read_pid_file(&path)?;
+
+    if !is_process_running(pid) {
+        return Err(DaemonError::PidFile(format!(
+            "process {} from {} is not running",
+            pid,
+            path.as_ref().display()
+        )));
+    }
+
+    nix::sys::signal::kill(Pid::from_raw(pid), signal)
+        .map_err(|e| DaemonError::PidFile(format!("cannot signal process {}: {}", pid, e)))?;
+
+    Ok(())
+}
+
+/// Returns the status of the daemon based on PID file.
+#[allow(dead_code)]
+#[derive(Debug, Clone, PartialEq, Eq)]
+pub enum DaemonStatus {
+    /// Daemon is running with the given PID.
+    Running(i32),
+    /// PID file exists but process is not running.
+    Stale(i32),
+    /// No PID file exists.
+    NotRunning,
+}
+
+/// Checks the daemon status from a PID file.
+#[allow(dead_code)]
+pub fn check_status<P: AsRef<Path>>(path: P) -> DaemonStatus {
+    let path = path.as_ref();
+
+    if !path.exists() {
+        return DaemonStatus::NotRunning;
+    }
+
+    match read_pid_file(path) {
+        Ok(pid) => {
+            if is_process_running(pid) {
+                DaemonStatus::Running(pid)
+            } else {
+                DaemonStatus::Stale(pid)
+            }
+        }
+        Err(_) => DaemonStatus::NotRunning,
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn test_daemon_options_default() {
+        let opts = DaemonOptions::default();
+        assert!(!opts.daemonize);
+        assert!(!opts.should_daemonize());
+        assert_eq!(opts.pid_file_path(), Path::new(DEFAULT_PID_FILE));
+    }
+
+    #[test]
+    fn test_daemon_options_foreground_overrides() {
+        let opts = DaemonOptions {
+            daemonize: true,
+            foreground: true,
+            ..Default::default()
+        };
+        assert!(!opts.should_daemonize());
+    }
+
+    #[test]
+    fn test_check_status_not_running() {
+        let path = "/tmp/telemt_test_nonexistent.pid";
+        assert_eq!(check_status(path), DaemonStatus::NotRunning);
+    }
+
+    #[test]
+    fn test_pid_file_basic() {
+        let path = "/tmp/telemt_test_pidfile.pid";
+        let _ = fs::remove_file(path);
+
+        let mut pf = PidFile::new(path);
+        assert!(pf.check_running().unwrap().is_none());
+
+        pf.acquire().unwrap();
+        assert!(Path::new(path).exists());
+
+        // Read it back
+        let pid = read_pid_file(path).unwrap();
+        assert_eq!(pid, std::process::id() as i32);
+
+        pf.release().unwrap();
+        assert!(!Path::new(path).exists());
+    }
+}

src/error.rs

@@ -12,28 +12,15 @@ use thiserror::Error;
 #[derive(Debug)]
 pub enum StreamError {
     /// Partial read: got fewer bytes than expected
-    PartialRead {
-        expected: usize,
-        got: usize,
-    },
+    PartialRead { expected: usize, got: usize },
     /// Partial write: wrote fewer bytes than expected
-    PartialWrite {
-        expected: usize,
-        written: usize,
-    },
+    PartialWrite { expected: usize, written: usize },
     /// Stream is in poisoned state and cannot be used
-    Poisoned {
-        reason: String,
-    },
+    Poisoned { reason: String },
     /// Buffer overflow: attempted to buffer more than allowed
-    BufferOverflow {
-        limit: usize,
-        attempted: usize,
-    },
+    BufferOverflow { limit: usize, attempted: usize },
     /// Invalid frame format
-    InvalidFrame {
-        details: String,
-    },
+    InvalidFrame { details: String },
     /// Unexpected end of stream
     UnexpectedEof,
     /// Underlying I/O error
@@ -47,13 +34,21 @@ impl fmt::Display for StreamError {
                 write!(f, "partial read: expected {} bytes, got {}", expected, got)
             }
             Self::PartialWrite { expected, written } => {
-                write!(f, "partial write: expected {} bytes, wrote {}", expected, written)
+                write!(
+                    f,
+                    "partial write: expected {} bytes, wrote {}",
+                    expected, written
+                )
             }
             Self::Poisoned { reason } => {
                 write!(f, "stream poisoned: {}", reason)
             }
             Self::BufferOverflow { limit, attempted } => {
-                write!(f, "buffer overflow: limit {}, attempted {}", limit, attempted)
+                write!(
+                    f,
+                    "buffer overflow: limit {}, attempted {}",
+                    limit, attempted
+                )
             }
             Self::InvalidFrame { details } => {
                 write!(f, "invalid frame: {}", details)
@@ -90,9 +85,7 @@ impl From<StreamError> for std::io::Error {
             StreamError::UnexpectedEof => {
                 std::io::Error::new(std::io::ErrorKind::UnexpectedEof, err)
             }
-            StreamError::Poisoned { .. } => {
-                std::io::Error::other(err)
-            }
+            StreamError::Poisoned { .. } => std::io::Error::other(err),
             StreamError::BufferOverflow { .. } => {
                 std::io::Error::new(std::io::ErrorKind::OutOfMemory, err)
             }
@@ -135,7 +128,10 @@ impl Recoverable for StreamError {
     }
 
     fn can_continue(&self) -> bool {
-        !matches!(self, Self::Poisoned { .. } | Self::UnexpectedEof | Self::BufferOverflow { .. })
+        !matches!(
+            self,
+            Self::Poisoned { .. } | Self::UnexpectedEof | Self::BufferOverflow { .. }
+        )
     }
 }
 
@@ -165,7 +161,6 @@ impl Recoverable for std::io::Error {
 #[derive(Error, Debug)]
 pub enum ProxyError {
     // ============= Crypto Errors =============
-    
     #[error("Crypto error: {0}")]
     Crypto(String),
 
@@ -173,12 +168,10 @@ pub enum ProxyError {
     InvalidKeyLength { expected: usize, got: usize },
 
     // ============= Stream Errors =============
-    
     #[error("Stream error: {0}")]
     Stream(#[from] StreamError),
 
     // ============= Protocol Errors =============
-    
     #[error("Invalid handshake: {0}")]
     InvalidHandshake(String),
 
@@ -210,7 +203,6 @@ pub enum ProxyError {
     TgHandshakeTimeout,
 
     // ============= Network Errors =============
-    
     #[error("Connection timeout to {addr}")]
     ConnectionTimeout { addr: String },
 
@@ -221,15 +213,16 @@ pub enum ProxyError {
     Io(#[from] std::io::Error),
 
     // ============= Proxy Protocol Errors =============
-    
     #[error("Invalid proxy protocol header")]
     InvalidProxyProtocol,
 
+    #[error("Unknown TLS SNI")]
+    UnknownTlsSni,
+
     #[error("Proxy error: {0}")]
     Proxy(String),
 
     // ============= Config Errors =============
-    
     #[error("Config error: {0}")]
     Config(String),
 
@@ -237,7 +230,6 @@ pub enum ProxyError {
     InvalidSecret { user: String, reason: String },
 
     // ============= User Errors =============
-    
     #[error("User {user} expired")]
     UserExpired { user: String },
 
@@ -254,7 +246,6 @@ pub enum ProxyError {
     RateLimited,
 
     // ============= General Errors =============
-    
     #[error("Internal error: {0}")]
     Internal(String),
 }
@@ -311,7 +302,9 @@ impl<T, R, W> HandshakeResult<T, R, W> {
     pub fn map<U, F: FnOnce(T) -> U>(self, f: F) -> HandshakeResult<U, R, W> {
         match self {
             HandshakeResult::Success(v) => HandshakeResult::Success(f(v)),
-            HandshakeResult::BadClient { reader, writer } => HandshakeResult::BadClient { reader, writer },
+            HandshakeResult::BadClient { reader, writer } => {
+                HandshakeResult::BadClient { reader, writer }
+            }
             HandshakeResult::Error(e) => HandshakeResult::Error(e),
         }
     }
@@ -341,18 +334,35 @@ mod tests {
 
     #[test]
     fn test_stream_error_display() {
-        let err = StreamError::PartialRead { expected: 100, got: 50 };
+        let err = StreamError::PartialRead {
+            expected: 100,
+            got: 50,
+        };
         assert!(err.to_string().contains("100"));
         assert!(err.to_string().contains("50"));
 
-        let err = StreamError::Poisoned { reason: "test".into() };
+        let err = StreamError::Poisoned {
+            reason: "test".into(),
+        };
         assert!(err.to_string().contains("test"));
     }
 
     #[test]
     fn test_stream_error_recoverable() {
-        assert!(StreamError::PartialRead { expected: 10, got: 5 }.is_recoverable());
-        assert!(StreamError::PartialWrite { expected: 10, written: 5 }.is_recoverable());
+        assert!(
+            StreamError::PartialRead {
+                expected: 10,
+                got: 5
+            }
+            .is_recoverable()
+        );
+        assert!(
+            StreamError::PartialWrite {
+                expected: 10,
+                written: 5
+            }
+            .is_recoverable()
+        );
         assert!(!StreamError::Poisoned { reason: "x".into() }.is_recoverable());
         assert!(!StreamError::UnexpectedEof.is_recoverable());
     }
@@ -361,7 +371,13 @@ mod tests {
     fn test_stream_error_can_continue() {
         assert!(!StreamError::Poisoned { reason: "x".into() }.can_continue());
         assert!(!StreamError::UnexpectedEof.can_continue());
-        assert!(StreamError::PartialRead { expected: 10, got: 5 }.can_continue());
+        assert!(
+            StreamError::PartialRead {
+                expected: 10,
+                got: 5
+            }
+            .can_continue()
+        );
     }
 
     #[test]
@@ -377,7 +393,10 @@ mod tests {
         assert!(success.is_success());
         assert!(!success.is_bad_client());
 
-        let bad: HandshakeResult<i32, (), ()> = HandshakeResult::BadClient { reader: (), writer: () };
+        let bad: HandshakeResult<i32, (), ()> = HandshakeResult::BadClient {
+            reader: (),
+            writer: (),
+        };
         assert!(!bad.is_success());
         assert!(bad.is_bad_client());
     }
@@ -404,7 +423,9 @@ mod tests {
 
     #[test]
     fn test_error_display() {
-        let err = ProxyError::ConnectionTimeout { addr: "1.2.3.4:443".into() };
+        let err = ProxyError::ConnectionTimeout {
+            addr: "1.2.3.4:443".into(),
+        };
         assert!(err.to_string().contains("1.2.3.4:443"));
 
         let err = ProxyError::InvalidProxyProtocol;

src/ip_tracker.rs

@@ -5,9 +5,11 @@
 use std::collections::HashMap;
 use std::net::IpAddr;
 use std::sync::Arc;
+use std::sync::Mutex;
+use std::sync::atomic::{AtomicU64, Ordering};
 use std::time::{Duration, Instant};
 
-use tokio::sync::RwLock;
+use tokio::sync::{Mutex as AsyncMutex, RwLock};
 
 use crate::config::UserMaxUniqueIpsMode;
 
@@ -16,8 +18,21 @@ pub struct UserIpTracker {
     active_ips: Arc<RwLock<HashMap<String, HashMap<IpAddr, usize>>>>,
     recent_ips: Arc<RwLock<HashMap<String, HashMap<IpAddr, Instant>>>>,
     max_ips: Arc<RwLock<HashMap<String, usize>>>,
+    default_max_ips: Arc<RwLock<usize>>,
     limit_mode: Arc<RwLock<UserMaxUniqueIpsMode>>,
     limit_window: Arc<RwLock<Duration>>,
+    last_compact_epoch_secs: Arc<AtomicU64>,
+    cleanup_queue: Arc<Mutex<Vec<(String, IpAddr)>>>,
+    cleanup_drain_lock: Arc<AsyncMutex<()>>,
+}
+
+#[derive(Debug, Clone, Copy)]
+pub struct UserIpTrackerMemoryStats {
+    pub active_users: usize,
+    pub recent_users: usize,
+    pub active_entries: usize,
+    pub recent_entries: usize,
+    pub cleanup_queue_len: usize,
 }
 
 impl UserIpTracker {
@@ -26,8 +41,164 @@ impl UserIpTracker {
             active_ips: Arc::new(RwLock::new(HashMap::new())),
             recent_ips: Arc::new(RwLock::new(HashMap::new())),
             max_ips: Arc::new(RwLock::new(HashMap::new())),
+            default_max_ips: Arc::new(RwLock::new(0)),
             limit_mode: Arc::new(RwLock::new(UserMaxUniqueIpsMode::ActiveWindow)),
             limit_window: Arc::new(RwLock::new(Duration::from_secs(30))),
+            last_compact_epoch_secs: Arc::new(AtomicU64::new(0)),
+            cleanup_queue: Arc::new(Mutex::new(Vec::new())),
+            cleanup_drain_lock: Arc::new(AsyncMutex::new(())),
+        }
+    }
+
+    pub fn enqueue_cleanup(&self, user: String, ip: IpAddr) {
+        match self.cleanup_queue.lock() {
+            Ok(mut queue) => queue.push((user, ip)),
+            Err(poisoned) => {
+                let mut queue = poisoned.into_inner();
+                queue.push((user.clone(), ip));
+                self.cleanup_queue.clear_poison();
+                tracing::warn!(
+                    "UserIpTracker cleanup_queue lock poisoned; recovered and enqueued IP cleanup for {} ({})",
+                    user,
+                    ip
+                );
+            }
+        }
+    }
+
+    #[cfg(test)]
+    pub(crate) fn cleanup_queue_len_for_tests(&self) -> usize {
+        self.cleanup_queue
+            .lock()
+            .unwrap_or_else(|poisoned| poisoned.into_inner())
+            .len()
+    }
+
+    #[cfg(test)]
+    pub(crate) fn cleanup_queue_mutex_for_tests(&self) -> Arc<Mutex<Vec<(String, IpAddr)>>> {
+        Arc::clone(&self.cleanup_queue)
+    }
+
+    pub(crate) async fn drain_cleanup_queue(&self) {
+        // Serialize queue draining and active-IP mutation so check-and-add cannot
+        // observe stale active entries that are already queued for removal.
+        let _drain_guard = self.cleanup_drain_lock.lock().await;
+        let to_remove = {
+            match self.cleanup_queue.lock() {
+                Ok(mut queue) => {
+                    if queue.is_empty() {
+                        return;
+                    }
+                    std::mem::take(&mut *queue)
+                }
+                Err(poisoned) => {
+                    let mut queue = poisoned.into_inner();
+                    if queue.is_empty() {
+                        self.cleanup_queue.clear_poison();
+                        return;
+                    }
+                    let drained = std::mem::take(&mut *queue);
+                    self.cleanup_queue.clear_poison();
+                    drained
+                }
+            }
+        };
+
+        let mut active_ips = self.active_ips.write().await;
+        for (user, ip) in to_remove {
+            if let Some(user_ips) = active_ips.get_mut(&user) {
+                if let Some(count) = user_ips.get_mut(&ip) {
+                    if *count > 1 {
+                        *count -= 1;
+                    } else {
+                        user_ips.remove(&ip);
+                    }
+                }
+                if user_ips.is_empty() {
+                    active_ips.remove(&user);
+                }
+            }
+        }
+    }
+
+    fn now_epoch_secs() -> u64 {
+        std::time::SystemTime::now()
+            .duration_since(std::time::UNIX_EPOCH)
+            .unwrap_or_default()
+            .as_secs()
+    }
+
+    async fn maybe_compact_empty_users(&self) {
+        const COMPACT_INTERVAL_SECS: u64 = 60;
+        let now_epoch_secs = Self::now_epoch_secs();
+        let last_compact_epoch_secs = self.last_compact_epoch_secs.load(Ordering::Relaxed);
+        if now_epoch_secs.saturating_sub(last_compact_epoch_secs) < COMPACT_INTERVAL_SECS {
+            return;
+        }
+        if self
+            .last_compact_epoch_secs
+            .compare_exchange(
+                last_compact_epoch_secs,
+                now_epoch_secs,
+                Ordering::AcqRel,
+                Ordering::Relaxed,
+            )
+            .is_err()
+        {
+            return;
+        }
+
+        let mut active_ips = self.active_ips.write().await;
+        let mut recent_ips = self.recent_ips.write().await;
+        let window = *self.limit_window.read().await;
+        let now = Instant::now();
+
+        for user_recent in recent_ips.values_mut() {
+            Self::prune_recent(user_recent, now, window);
+        }
+
+        let mut users =
+            Vec::<String>::with_capacity(active_ips.len().saturating_add(recent_ips.len()));
+        users.extend(active_ips.keys().cloned());
+        for user in recent_ips.keys() {
+            if !active_ips.contains_key(user) {
+                users.push(user.clone());
+            }
+        }
+
+        for user in users {
+            let active_empty = active_ips
+                .get(&user)
+                .map(|ips| ips.is_empty())
+                .unwrap_or(true);
+            let recent_empty = recent_ips
+                .get(&user)
+                .map(|ips| ips.is_empty())
+                .unwrap_or(true);
+            if active_empty && recent_empty {
+                active_ips.remove(&user);
+                recent_ips.remove(&user);
+            }
+        }
+    }
+
+    pub async fn memory_stats(&self) -> UserIpTrackerMemoryStats {
+        let cleanup_queue_len = self
+            .cleanup_queue
+            .lock()
+            .unwrap_or_else(|poisoned| poisoned.into_inner())
+            .len();
+        let active_ips = self.active_ips.read().await;
+        let recent_ips = self.recent_ips.read().await;
+        let active_entries = active_ips.values().map(HashMap::len).sum();
+        let recent_entries = recent_ips.values().map(HashMap::len).sum();
+
+        UserIpTrackerMemoryStats {
+            active_users: active_ips.len(),
+            recent_users: recent_ips.len(),
+            active_entries,
+            recent_entries,
+            cleanup_queue_len,
         }
     }
 
@@ -50,7 +221,10 @@ impl UserIpTracker {
         limits.remove(username);
     }
 
-    pub async fn load_limits(&self, limits: &HashMap<String, usize>) {
+    pub async fn load_limits(&self, default_limit: usize, limits: &HashMap<String, usize>) {
+        let mut default_max_ips = self.default_max_ips.write().await;
+        *default_max_ips = default_limit;
+        drop(default_max_ips);
         let mut max_ips = self.max_ips.write().await;
         max_ips.clone_from(limits);
     }
@@ -63,9 +237,16 @@ impl UserIpTracker {
     }
 
     pub async fn check_and_add(&self, username: &str, ip: IpAddr) -> Result<(), String> {
+        self.drain_cleanup_queue().await;
+        self.maybe_compact_empty_users().await;
+        let default_max_ips = *self.default_max_ips.read().await;
         let limit = {
             let max_ips = self.max_ips.read().await;
-            max_ips.get(username).copied()
+            max_ips
+                .get(username)
+                .copied()
+                .filter(|limit| *limit > 0)
+                .or((default_max_ips > 0).then_some(default_max_ips))
         };
         let mode = *self.limit_mode.read().await;
         let window = *self.limit_window.read().await;
@@ -116,6 +297,7 @@ impl UserIpTracker {
     }
 
     pub async fn remove_ip(&self, username: &str, ip: IpAddr) {
+        self.maybe_compact_empty_users().await;
         let mut active_ips = self.active_ips.write().await;
         if let Some(user_ips) = active_ips.get_mut(username) {
             if let Some(count) = user_ips.get_mut(&ip) {
@@ -132,6 +314,7 @@ impl UserIpTracker {
     }
 
     pub async fn get_recent_counts_for_users(&self, users: &[String]) -> HashMap<String, usize> {
+        self.drain_cleanup_queue().await;
         let window = *self.limit_window.read().await;
         let now = Instant::now();
         let recent_ips = self.recent_ips.read().await;
@@ -152,6 +335,7 @@ impl UserIpTracker {
     }
 
     pub async fn get_active_ips_for_users(&self, users: &[String]) -> HashMap<String, Vec<IpAddr>> {
+        self.drain_cleanup_queue().await;
         let active_ips = self.active_ips.read().await;
         let mut out = HashMap::with_capacity(users.len());
         for user in users {
@@ -166,6 +350,7 @@ impl UserIpTracker {
     }
 
     pub async fn get_recent_ips_for_users(&self, users: &[String]) -> HashMap<String, Vec<IpAddr>> {
+        self.drain_cleanup_queue().await;
         let window = *self.limit_window.read().await;
         let now = Instant::now();
         let recent_ips = self.recent_ips.read().await;
@@ -188,11 +373,13 @@ impl UserIpTracker {
     }
 
     pub async fn get_active_ip_count(&self, username: &str) -> usize {
+        self.drain_cleanup_queue().await;
         let active_ips = self.active_ips.read().await;
         active_ips.get(username).map(|ips| ips.len()).unwrap_or(0)
     }
 
     pub async fn get_active_ips(&self, username: &str) -> Vec<IpAddr> {
+        self.drain_cleanup_queue().await;
         let active_ips = self.active_ips.read().await;
         active_ips
             .get(username)
@@ -201,12 +388,19 @@ impl UserIpTracker {
     }
 
     pub async fn get_stats(&self) -> Vec<(String, usize, usize)> {
+        self.drain_cleanup_queue().await;
         let active_ips = self.active_ips.read().await;
         let max_ips = self.max_ips.read().await;
+        let default_max_ips = *self.default_max_ips.read().await;
 
         let mut stats = Vec::new();
         for (username, user_ips) in active_ips.iter() {
-            let limit = max_ips.get(username).copied().unwrap_or(0);
+            let limit = max_ips
+                .get(username)
+                .copied()
+                .filter(|limit| *limit > 0)
+                .or((default_max_ips > 0).then_some(default_max_ips))
+                .unwrap_or(0);
             stats.push((username.clone(), user_ips.len(), limit));
         }
 
@@ -233,6 +427,7 @@ impl UserIpTracker {
     }
 
     pub async fn is_ip_active(&self, username: &str, ip: IpAddr) -> bool {
+        self.drain_cleanup_queue().await;
         let active_ips = self.active_ips.read().await;
         active_ips
             .get(username)
@@ -241,8 +436,13 @@ impl UserIpTracker {
     }
 
     pub async fn get_user_limit(&self, username: &str) -> Option<usize> {
+        let default_max_ips = *self.default_max_ips.read().await;
         let max_ips = self.max_ips.read().await;
-        max_ips.get(username).copied()
+        max_ips
+            .get(username)
+            .copied()
+            .filter(|limit| *limit > 0)
+            .or((default_max_ips > 0).then_some(default_max_ips))
     }
 
     pub async fn format_stats(&self) -> String {
@@ -287,6 +487,7 @@ impl Default for UserIpTracker {
 mod tests {
     use super::*;
     use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};
+    use std::sync::atomic::Ordering;
 
     fn test_ipv4(oct1: u8, oct2: u8, oct3: u8, oct4: u8) -> IpAddr {
         IpAddr::V4(Ipv4Addr::new(oct1, oct2, oct3, oct4))
@@ -494,7 +695,7 @@ mod tests {
         config_limits.insert("user1".to_string(), 5);
         config_limits.insert("user2".to_string(), 3);
 
-        tracker.load_limits(&config_limits).await;
+        tracker.load_limits(0, &config_limits).await;
 
         assert_eq!(tracker.get_user_limit("user1").await, Some(5));
         assert_eq!(tracker.get_user_limit("user2").await, Some(3));
@@ -508,16 +709,46 @@ mod tests {
         let mut first = HashMap::new();
         first.insert("user1".to_string(), 2);
         first.insert("user2".to_string(), 3);
-        tracker.load_limits(&first).await;
+        tracker.load_limits(0, &first).await;
 
         let mut second = HashMap::new();
         second.insert("user2".to_string(), 5);
-        tracker.load_limits(&second).await;
+        tracker.load_limits(0, &second).await;
 
         assert_eq!(tracker.get_user_limit("user1").await, None);
         assert_eq!(tracker.get_user_limit("user2").await, Some(5));
     }
 
+    #[tokio::test]
+    async fn test_global_each_limit_applies_without_user_override() {
+        let tracker = UserIpTracker::new();
+        tracker.load_limits(2, &HashMap::new()).await;
+
+        let ip1 = test_ipv4(172, 16, 0, 1);
+        let ip2 = test_ipv4(172, 16, 0, 2);
+        let ip3 = test_ipv4(172, 16, 0, 3);
+
+        assert!(tracker.check_and_add("test_user", ip1).await.is_ok());
+        assert!(tracker.check_and_add("test_user", ip2).await.is_ok());
+        assert!(tracker.check_and_add("test_user", ip3).await.is_err());
+        assert_eq!(tracker.get_user_limit("test_user").await, Some(2));
+    }
+
+    #[tokio::test]
+    async fn test_user_override_wins_over_global_each_limit() {
+        let tracker = UserIpTracker::new();
+        let mut limits = HashMap::new();
+        limits.insert("test_user".to_string(), 1);
+        tracker.load_limits(3, &limits).await;
+
+        let ip1 = test_ipv4(172, 17, 0, 1);
+        let ip2 = test_ipv4(172, 17, 0, 2);
+
+        assert!(tracker.check_and_add("test_user", ip1).await.is_ok());
+        assert!(tracker.check_and_add("test_user", ip2).await.is_err());
+        assert_eq!(tracker.get_user_limit("test_user").await, Some(1));
+    }
+
     #[tokio::test]
     async fn test_time_window_mode_blocks_recent_ip_churn() {
         let tracker = UserIpTracker::new();
@@ -570,4 +801,54 @@ mod tests {
         tokio::time::sleep(Duration::from_millis(1100)).await;
         assert!(tracker.check_and_add("test_user", ip2).await.is_ok());
     }
+
+    #[tokio::test]
+    async fn test_memory_stats_reports_queue_and_entry_counts() {
+        let tracker = UserIpTracker::new();
+        tracker.set_user_limit("test_user", 4).await;
+        let ip1 = test_ipv4(10, 2, 0, 1);
+        let ip2 = test_ipv4(10, 2, 0, 2);
+
+        tracker.check_and_add("test_user", ip1).await.unwrap();
+        tracker.check_and_add("test_user", ip2).await.unwrap();
+        tracker.enqueue_cleanup("test_user".to_string(), ip1);
+
+        let snapshot = tracker.memory_stats().await;
+        assert_eq!(snapshot.active_users, 1);
+        assert_eq!(snapshot.recent_users, 1);
+        assert_eq!(snapshot.active_entries, 2);
+        assert_eq!(snapshot.recent_entries, 2);
+        assert_eq!(snapshot.cleanup_queue_len, 1);
+    }
+
+    #[tokio::test]
+    async fn test_compact_prunes_stale_recent_entries() {
+        let tracker = UserIpTracker::new();
+        tracker
+            .set_limit_policy(UserMaxUniqueIpsMode::TimeWindow, 1)
+            .await;
+
+        let stale_user = "stale-user".to_string();
+        let stale_ip = test_ipv4(10, 3, 0, 1);
+        {
+            let mut recent_ips = tracker.recent_ips.write().await;
+            recent_ips
+                .entry(stale_user.clone())
+                .or_insert_with(HashMap::new)
+                .insert(stale_ip, Instant::now() - Duration::from_secs(5));
+        }
+
+        tracker.last_compact_epoch_secs.store(0, Ordering::Relaxed);
+        tracker
+            .check_and_add("trigger-user", test_ipv4(10, 3, 0, 2))
+            .await
+            .unwrap();
+
+        let recent_ips = tracker.recent_ips.read().await;
+        let stale_exists = recent_ips
+            .get(&stale_user)
+            .map(|ips| ips.contains_key(&stale_ip))
+            .unwrap_or(false);
+        assert!(!stale_exists);
+    }
 }

src/logging.rs

@@ -0,0 +1,343 @@
+//! Logging configuration for telemt.
+//!
+//! Supports multiple log destinations:
+//! - stderr (default, works with systemd journald)
+//! - syslog (Unix only, for traditional init systems)
+//! - file (with optional rotation)
+
+#![allow(dead_code)] // Infrastructure module - used via CLI flags
+
+use std::path::Path;
+
+use tracing_subscriber::layer::SubscriberExt;
+use tracing_subscriber::util::SubscriberInitExt;
+use tracing_subscriber::{EnvFilter, fmt, reload};
+
+/// Log destination configuration.
+#[derive(Debug, Clone, Default)]
+pub enum LogDestination {
+    /// Log to stderr (default, captured by systemd journald).
+    #[default]
+    Stderr,
+    /// Log to syslog (Unix only).
+    #[cfg(unix)]
+    Syslog,
+    /// Log to a file with optional rotation.
+    File {
+        path: String,
+        /// Rotate daily if true.
+        rotate_daily: bool,
+    },
+}
+
+/// Logging options parsed from CLI/config.
+#[derive(Debug, Clone, Default)]
+pub struct LoggingOptions {
+    /// Where to send logs.
+    pub destination: LogDestination,
+    /// Disable ANSI colors.
+    pub disable_colors: bool,
+}
+
+/// Guard that must be held to keep file logging active.
+/// When dropped, flushes and closes log files.
+pub struct LoggingGuard {
+    _guard: Option<tracing_appender::non_blocking::WorkerGuard>,
+}
+
+impl LoggingGuard {
+    fn new(guard: Option<tracing_appender::non_blocking::WorkerGuard>) -> Self {
+        Self { _guard: guard }
+    }
+
+    /// Creates a no-op guard for stderr/syslog logging.
+    pub fn noop() -> Self {
+        Self { _guard: None }
+    }
+}
+
+/// Initialize the tracing subscriber with the specified options.
+///
+/// Returns a reload handle for dynamic log level changes and a guard
+/// that must be kept alive for file logging.
+pub fn init_logging(
+    opts: &LoggingOptions,
+    initial_filter: &str,
+) -> (
+    reload::Handle<EnvFilter, impl tracing::Subscriber + Send + Sync>,
+    LoggingGuard,
+) {
+    let (filter_layer, filter_handle) = reload::Layer::new(EnvFilter::new(initial_filter));
+
+    match &opts.destination {
+        LogDestination::Stderr => {
+            let fmt_layer = fmt::Layer::default()
+                .with_ansi(!opts.disable_colors)
+                .with_target(true);
+
+            tracing_subscriber::registry()
+                .with(filter_layer)
+                .with(fmt_layer)
+                .init();
+
+            (filter_handle, LoggingGuard::noop())
+        }
+
+        #[cfg(unix)]
+        LogDestination::Syslog => {
+            // Use a custom fmt layer that writes to syslog
+            let fmt_layer = fmt::Layer::default()
+                .with_ansi(false)
+                .with_target(false)
+                .with_level(false)
+                .without_time()
+                .with_writer(SyslogMakeWriter::new());
+
+            tracing_subscriber::registry()
+                .with(filter_layer)
+                .with(fmt_layer)
+                .init();
+
+            (filter_handle, LoggingGuard::noop())
+        }
+
+        LogDestination::File { path, rotate_daily } => {
+            let (non_blocking, guard) = if *rotate_daily {
+                // Extract directory and filename prefix
+                let path = Path::new(path);
+                let dir = path.parent().unwrap_or(Path::new("/var/log"));
+                let prefix = path
+                    .file_name()
+                    .and_then(|s| s.to_str())
+                    .unwrap_or("telemt");
+
+                let file_appender = tracing_appender::rolling::daily(dir, prefix);
+                tracing_appender::non_blocking(file_appender)
+            } else {
+                let file = std::fs::OpenOptions::new()
+                    .create(true)
+                    .append(true)
+                    .open(path)
+                    .expect("Failed to open log file");
+                tracing_appender::non_blocking(file)
+            };
+
+            let fmt_layer = fmt::Layer::default()
+                .with_ansi(false)
+                .with_target(true)
+                .with_writer(non_blocking);
+
+            tracing_subscriber::registry()
+                .with(filter_layer)
+                .with(fmt_layer)
+                .init();
+
+            (filter_handle, LoggingGuard::new(Some(guard)))
+        }
+    }
+}
+
+/// Syslog writer for tracing.
+#[cfg(unix)]
+#[derive(Clone, Copy)]
+struct SyslogMakeWriter;
+
+#[cfg(unix)]
+#[derive(Clone, Copy)]
+struct SyslogWriter {
+    priority: libc::c_int,
+}
+
+#[cfg(unix)]
+impl SyslogMakeWriter {
+    fn new() -> Self {
+        // Open syslog connection on first use
+        static INIT: std::sync::Once = std::sync::Once::new();
+        INIT.call_once(|| {
+            unsafe {
+                // Open syslog with ident "telemt", LOG_PID, LOG_DAEMON facility
+                let ident = b"telemt\0".as_ptr() as *const libc::c_char;
+                libc::openlog(ident, libc::LOG_PID | libc::LOG_NDELAY, libc::LOG_DAEMON);
+            }
+        });
+        Self
+    }
+}
+
+#[cfg(unix)]
+fn syslog_priority_for_level(level: &tracing::Level) -> libc::c_int {
+    match *level {
+        tracing::Level::ERROR => libc::LOG_ERR,
+        tracing::Level::WARN => libc::LOG_WARNING,
+        tracing::Level::INFO => libc::LOG_INFO,
+        tracing::Level::DEBUG => libc::LOG_DEBUG,
+        tracing::Level::TRACE => libc::LOG_DEBUG,
+    }
+}
+
+#[cfg(unix)]
+impl std::io::Write for SyslogWriter {
+    fn write(&mut self, buf: &[u8]) -> std::io::Result<usize> {
+        // Convert to C string, stripping newlines
+        let msg = String::from_utf8_lossy(buf);
+        let msg = msg.trim_end();
+
+        if msg.is_empty() {
+            return Ok(buf.len());
+        }
+
+        // Write to syslog
+        let c_msg = std::ffi::CString::new(msg.as_bytes())
+            .unwrap_or_else(|_| std::ffi::CString::new("(invalid utf8)").unwrap());
+
+        unsafe {
+            libc::syslog(
+                self.priority,
+                b"%s\0".as_ptr() as *const libc::c_char,
+                c_msg.as_ptr(),
+            );
+        }
+
+        Ok(buf.len())
+    }
+
+    fn flush(&mut self) -> std::io::Result<()> {
+        Ok(())
+    }
+}
+
+#[cfg(unix)]
+impl<'a> tracing_subscriber::fmt::MakeWriter<'a> for SyslogMakeWriter {
+    type Writer = SyslogWriter;
+
+    fn make_writer(&'a self) -> Self::Writer {
+        SyslogWriter {
+            priority: libc::LOG_INFO,
+        }
+    }
+
+    fn make_writer_for(&'a self, meta: &tracing::Metadata<'_>) -> Self::Writer {
+        SyslogWriter {
+            priority: syslog_priority_for_level(meta.level()),
+        }
+    }
+}
+
+/// Parse log destination from CLI arguments.
+pub fn parse_log_destination(args: &[String]) -> LogDestination {
+    let mut i = 0;
+    while i < args.len() {
+        match args[i].as_str() {
+            #[cfg(unix)]
+            "--syslog" => {
+                return LogDestination::Syslog;
+            }
+            "--log-file" => {
+                i += 1;
+                if i < args.len() {
+                    return LogDestination::File {
+                        path: args[i].clone(),
+                        rotate_daily: false,
+                    };
+                }
+            }
+            s if s.starts_with("--log-file=") => {
+                return LogDestination::File {
+                    path: s.trim_start_matches("--log-file=").to_string(),
+                    rotate_daily: false,
+                };
+            }
+            "--log-file-daily" => {
+                i += 1;
+                if i < args.len() {
+                    return LogDestination::File {
+                        path: args[i].clone(),
+                        rotate_daily: true,
+                    };
+                }
+            }
+            s if s.starts_with("--log-file-daily=") => {
+                return LogDestination::File {
+                    path: s.trim_start_matches("--log-file-daily=").to_string(),
+                    rotate_daily: true,
+                };
+            }
+            _ => {}
+        }
+        i += 1;
+    }
+    LogDestination::Stderr
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn test_parse_log_destination_default() {
+        let args: Vec<String> = vec![];
+        assert!(matches!(
+            parse_log_destination(&args),
+            LogDestination::Stderr
+        ));
+    }
+
+    #[test]
+    fn test_parse_log_destination_file() {
+        let args = vec!["--log-file".to_string(), "/var/log/telemt.log".to_string()];
+        match parse_log_destination(&args) {
+            LogDestination::File { path, rotate_daily } => {
+                assert_eq!(path, "/var/log/telemt.log");
+                assert!(!rotate_daily);
+            }
+            _ => panic!("Expected File destination"),
+        }
+    }
+
+    #[test]
+    fn test_parse_log_destination_file_daily() {
+        let args = vec!["--log-file-daily=/var/log/telemt".to_string()];
+        match parse_log_destination(&args) {
+            LogDestination::File { path, rotate_daily } => {
+                assert_eq!(path, "/var/log/telemt");
+                assert!(rotate_daily);
+            }
+            _ => panic!("Expected File destination"),
+        }
+    }
+
+    #[cfg(unix)]
+    #[test]
+    fn test_parse_log_destination_syslog() {
+        let args = vec!["--syslog".to_string()];
+        assert!(matches!(
+            parse_log_destination(&args),
+            LogDestination::Syslog
+        ));
+    }
+
+    #[cfg(unix)]
+    #[test]
+    fn test_syslog_priority_for_level_mapping() {
+        assert_eq!(
+            syslog_priority_for_level(&tracing::Level::ERROR),
+            libc::LOG_ERR
+        );
+        assert_eq!(
+            syslog_priority_for_level(&tracing::Level::WARN),
+            libc::LOG_WARNING
+        );
+        assert_eq!(
+            syslog_priority_for_level(&tracing::Level::INFO),
+            libc::LOG_INFO
+        );
+        assert_eq!(
+            syslog_priority_for_level(&tracing::Level::DEBUG),
+            libc::LOG_DEBUG
+        );
+        assert_eq!(
+            syslog_priority_for_level(&tracing::Level::TRACE),
+            libc::LOG_DEBUG
+        );
+    }
+}

src/maestro/admission.rs

@@ -0,0 +1,170 @@
+use std::sync::Arc;
+use std::time::{Duration, Instant};
+
+use tokio::sync::watch;
+use tracing::{info, warn};
+
+use crate::config::ProxyConfig;
+use crate::proxy::route_mode::{RelayRouteMode, RouteRuntimeController};
+use crate::transport::middle_proxy::MePool;
+
+const STARTUP_FALLBACK_AFTER: Duration = Duration::from_secs(80);
+const RUNTIME_FALLBACK_AFTER: Duration = Duration::from_secs(6);
+
+pub(crate) async fn configure_admission_gate(
+    config: &Arc<ProxyConfig>,
+    me_pool: Option<Arc<MePool>>,
+    route_runtime: Arc<RouteRuntimeController>,
+    admission_tx: &watch::Sender<bool>,
+    config_rx: watch::Receiver<Arc<ProxyConfig>>,
+) {
+    if config.general.use_middle_proxy {
+        if let Some(pool) = me_pool.as_ref() {
+            let initial_ready = pool.admission_ready_conditional_cast().await;
+            let mut fallback_enabled = config.general.me2dc_fallback;
+            let mut fast_fallback_enabled = fallback_enabled && config.general.me2dc_fast;
+            let (initial_gate_open, initial_route_mode, initial_fallback_reason) = if initial_ready
+            {
+                (true, RelayRouteMode::Middle, None)
+            } else if fast_fallback_enabled {
+                (
+                    true,
+                    RelayRouteMode::Direct,
+                    Some("fast_not_ready_fallback"),
+                )
+            } else {
+                (false, RelayRouteMode::Middle, None)
+            };
+            admission_tx.send_replace(initial_gate_open);
+            let _ = route_runtime.set_mode(initial_route_mode);
+            if initial_ready {
+                info!("Conditional-admission gate: open / ME pool READY");
+            } else if let Some(reason) = initial_fallback_reason {
+                warn!(
+                    fallback_reason = reason,
+                    "Conditional-admission gate opened in ME fast fallback mode"
+                );
+            } else {
+                warn!("Conditional-admission gate: closed / ME pool is NOT ready)");
+            }
+
+            let pool_for_gate = pool.clone();
+            let admission_tx_gate = admission_tx.clone();
+            let route_runtime_gate = route_runtime.clone();
+            let mut config_rx_gate = config_rx.clone();
+            let mut admission_poll_ms = config.general.me_admission_poll_ms.max(1);
+            tokio::spawn(async move {
+                let mut gate_open = initial_gate_open;
+                let mut route_mode = initial_route_mode;
+                let mut ready_observed = initial_ready;
+                let mut not_ready_since = if initial_ready {
+                    None
+                } else {
+                    Some(Instant::now())
+                };
+                loop {
+                    tokio::select! {
+                        changed = config_rx_gate.changed() => {
+                            if changed.is_err() {
+                                break;
+                            }
+                            let cfg = config_rx_gate.borrow_and_update().clone();
+                            admission_poll_ms = cfg.general.me_admission_poll_ms.max(1);
+                            fallback_enabled = cfg.general.me2dc_fallback;
+                            fast_fallback_enabled = cfg.general.me2dc_fallback && cfg.general.me2dc_fast;
+                            continue;
+                        }
+                        _ = tokio::time::sleep(Duration::from_millis(admission_poll_ms)) => {}
+                    }
+                    let ready = pool_for_gate.admission_ready_conditional_cast().await;
+                    let now = Instant::now();
+                    let (next_gate_open, next_route_mode, next_fallback_reason) = if ready {
+                        ready_observed = true;
+                        not_ready_since = None;
+                        (true, RelayRouteMode::Middle, None)
+                    } else if fast_fallback_enabled {
+                        (
+                            true,
+                            RelayRouteMode::Direct,
+                            Some("fast_not_ready_fallback"),
+                        )
+                    } else {
+                        let not_ready_started_at = *not_ready_since.get_or_insert(now);
+                        let not_ready_for = now.saturating_duration_since(not_ready_started_at);
+                        let fallback_after = if ready_observed {
+                            RUNTIME_FALLBACK_AFTER
+                        } else {
+                            STARTUP_FALLBACK_AFTER
+                        };
+                        if fallback_enabled && not_ready_for > fallback_after {
+                            (true, RelayRouteMode::Direct, Some("strict_grace_fallback"))
+                        } else {
+                            (false, RelayRouteMode::Middle, None)
+                        }
+                    };
+                    let next_fallback_active = next_fallback_reason.is_some();
+
+                    if next_route_mode != route_mode {
+                        route_mode = next_route_mode;
+                        if let Some(snapshot) = route_runtime_gate.set_mode(route_mode) {
+                            if matches!(route_mode, RelayRouteMode::Middle) {
+                                info!(
+                                    target_mode = route_mode.as_str(),
+                                    cutover_generation = snapshot.generation,
+                                    "Middle-End routing restored for new sessions"
+                                );
+                            } else {
+                                let fallback_reason = next_fallback_reason.unwrap_or("unknown");
+                                if fallback_reason == "strict_grace_fallback" {
+                                    let fallback_after = if ready_observed {
+                                        RUNTIME_FALLBACK_AFTER
+                                    } else {
+                                        STARTUP_FALLBACK_AFTER
+                                    };
+                                    warn!(
+                                        target_mode = route_mode.as_str(),
+                                        cutover_generation = snapshot.generation,
+                                        grace_secs = fallback_after.as_secs(),
+                                        fallback_reason,
+                                        "ME pool stayed not-ready beyond grace; routing new sessions via Direct-DC"
+                                    );
+                                } else {
+                                    warn!(
+                                        target_mode = route_mode.as_str(),
+                                        cutover_generation = snapshot.generation,
+                                        fallback_reason,
+                                        "ME pool not-ready; routing new sessions via Direct-DC (fast mode)"
+                                    );
+                                }
+                            }
+                        }
+                    }
+
+                    if next_gate_open != gate_open {
+                        gate_open = next_gate_open;
+                        admission_tx_gate.send_replace(gate_open);
+                        if gate_open {
+                            if next_fallback_active {
+                                warn!(
+                                    fallback_reason = next_fallback_reason.unwrap_or("unknown"),
+                                    "Conditional-admission gate opened in ME fallback mode"
+                                );
+                            } else {
+                                info!("Conditional-admission gate opened / ME pool READY");
+                            }
+                        } else {
+                            warn!("Conditional-admission gate closed / ME pool is NOT ready");
+                        }
+                    }
+                }
+            });
+        } else {
+            admission_tx.send_replace(false);
+            let _ = route_runtime.set_mode(RelayRouteMode::Direct);
+            warn!("Conditional-admission gate: closed / ME pool is UNAVAILABLE");
+        }
+    } else {
+        admission_tx.send_replace(true);
+        let _ = route_runtime.set_mode(RelayRouteMode::Direct);
+    }
+}

src/maestro/connectivity.rs

@@ -0,0 +1,232 @@
+#![allow(clippy::too_many_arguments)]
+
+use std::sync::Arc;
+use std::time::Instant;
+
+use tokio::sync::RwLock;
+use tracing::info;
+
+use crate::config::ProxyConfig;
+use crate::crypto::SecureRandom;
+use crate::network::probe::NetworkDecision;
+use crate::startup::{
+    COMPONENT_DC_CONNECTIVITY_PING, COMPONENT_ME_CONNECTIVITY_PING, COMPONENT_RUNTIME_READY,
+    StartupTracker,
+};
+use crate::transport::UpstreamManager;
+use crate::transport::middle_proxy::{
+    MePingFamily, MePingSample, MePool, format_me_route, format_sample_line, run_me_ping,
+};
+
+pub(crate) async fn run_startup_connectivity(
+    config: &Arc<ProxyConfig>,
+    me_pool: &Option<Arc<MePool>>,
+    rng: Arc<SecureRandom>,
+    startup_tracker: &Arc<StartupTracker>,
+    upstream_manager: Arc<UpstreamManager>,
+    prefer_ipv6: bool,
+    decision: &NetworkDecision,
+    process_started_at: Instant,
+    api_me_pool: Arc<RwLock<Option<Arc<MePool>>>>,
+) {
+    if me_pool.is_some() {
+        startup_tracker
+            .start_component(
+                COMPONENT_ME_CONNECTIVITY_PING,
+                Some("run startup ME connectivity check".to_string()),
+            )
+            .await;
+    } else {
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_CONNECTIVITY_PING,
+                Some("ME pool is not available".to_string()),
+            )
+            .await;
+    }
+    if let Some(pool) = me_pool {
+        let me_results = run_me_ping(pool, &rng).await;
+
+        let v4_ok = me_results.iter().any(|r| {
+            matches!(r.family, MePingFamily::V4)
+                && r.samples
+                    .iter()
+                    .any(|s| s.error.is_none() && s.handshake_ms.is_some())
+        });
+        let v6_ok = me_results.iter().any(|r| {
+            matches!(r.family, MePingFamily::V6)
+                && r.samples
+                    .iter()
+                    .any(|s| s.error.is_none() && s.handshake_ms.is_some())
+        });
+
+        info!("================= Telegram ME Connectivity =================");
+        if v4_ok && v6_ok {
+            info!("  IPv4 and IPv6 available");
+        } else if v4_ok {
+            info!("  IPv4 only / IPv6 unavailable");
+        } else if v6_ok {
+            info!("  IPv6 only / IPv4 unavailable");
+        } else {
+            info!("  No ME connectivity");
+        }
+        let me_route =
+            format_me_route(&config.upstreams, &me_results, prefer_ipv6, v4_ok, v6_ok).await;
+        info!("  via {}", me_route);
+        info!("============================================================");
+
+        use std::collections::BTreeMap;
+        let mut grouped: BTreeMap<i32, Vec<MePingSample>> = BTreeMap::new();
+        for report in me_results {
+            for s in report.samples {
+                grouped.entry(s.dc).or_default().push(s);
+            }
+        }
+
+        let family_order = if prefer_ipv6 {
+            vec![MePingFamily::V6, MePingFamily::V4]
+        } else {
+            vec![MePingFamily::V4, MePingFamily::V6]
+        };
+
+        for (dc, samples) in grouped {
+            for family in &family_order {
+                let fam_samples: Vec<&MePingSample> = samples
+                    .iter()
+                    .filter(|s| matches!(s.family, f if &f == family))
+                    .collect();
+                if fam_samples.is_empty() {
+                    continue;
+                }
+
+                let fam_label = match family {
+                    MePingFamily::V4 => "IPv4",
+                    MePingFamily::V6 => "IPv6",
+                };
+                info!("    DC{} [{}]", dc, fam_label);
+                for sample in fam_samples {
+                    let line = format_sample_line(sample);
+                    info!("{}", line);
+                }
+            }
+        }
+        info!("============================================================");
+        startup_tracker
+            .complete_component(
+                COMPONENT_ME_CONNECTIVITY_PING,
+                Some("startup ME connectivity check completed".to_string()),
+            )
+            .await;
+    }
+
+    info!("================= Telegram DC Connectivity =================");
+    startup_tracker
+        .start_component(
+            COMPONENT_DC_CONNECTIVITY_PING,
+            Some("run startup DC connectivity check".to_string()),
+        )
+        .await;
+
+    let ping_results = upstream_manager
+        .ping_all_dcs(
+            prefer_ipv6,
+            &config.dc_overrides,
+            decision.ipv4_dc,
+            decision.ipv6_dc,
+        )
+        .await;
+
+    for upstream_result in &ping_results {
+        let v6_works = upstream_result
+            .v6_results
+            .iter()
+            .any(|r| r.rtt_ms.is_some());
+        let v4_works = upstream_result
+            .v4_results
+            .iter()
+            .any(|r| r.rtt_ms.is_some());
+
+        if upstream_result.both_available {
+            if prefer_ipv6 {
+                info!("  IPv6 in use / IPv4 is fallback");
+            } else {
+                info!("  IPv4 in use / IPv6 is fallback");
+            }
+        } else if v6_works && !v4_works {
+            info!("  IPv6 only / IPv4 unavailable");
+        } else if v4_works && !v6_works {
+            info!("  IPv4 only / IPv6 unavailable");
+        } else if !v6_works && !v4_works {
+            info!("  No DC connectivity");
+        }
+
+        info!("  via {}", upstream_result.upstream_name);
+        info!("============================================================");
+
+        if v6_works {
+            for dc in &upstream_result.v6_results {
+                let addr_str = format!("{}:{}", dc.dc_addr.ip(), dc.dc_addr.port());
+                match &dc.rtt_ms {
+                    Some(rtt) => {
+                        info!("    DC{} [IPv6] {} - {:.0} ms", dc.dc_idx, addr_str, rtt);
+                    }
+                    None => {
+                        let err = dc.error.as_deref().unwrap_or("fail");
+                        info!("    DC{} [IPv6] {} - FAIL ({})", dc.dc_idx, addr_str, err);
+                    }
+                }
+            }
+
+            info!("============================================================");
+        }
+
+        if v4_works {
+            for dc in &upstream_result.v4_results {
+                let addr_str = format!("{}:{}", dc.dc_addr.ip(), dc.dc_addr.port());
+                match &dc.rtt_ms {
+                    Some(rtt) => {
+                        info!(
+                            "    DC{} [IPv4] {}\t\t\t\t{:.0} ms",
+                            dc.dc_idx, addr_str, rtt
+                        );
+                    }
+                    None => {
+                        let err = dc.error.as_deref().unwrap_or("fail");
+                        info!(
+                            "    DC{} [IPv4] {}:\t\t\t\tFAIL ({})",
+                            dc.dc_idx, addr_str, err
+                        );
+                    }
+                }
+            }
+
+            info!("============================================================");
+        }
+    }
+    startup_tracker
+        .complete_component(
+            COMPONENT_DC_CONNECTIVITY_PING,
+            Some("startup DC connectivity check completed".to_string()),
+        )
+        .await;
+
+    let initialized_secs = process_started_at.elapsed().as_secs();
+    let second_suffix = if initialized_secs == 1 { "" } else { "s" };
+    startup_tracker
+        .start_component(
+            COMPONENT_RUNTIME_READY,
+            Some("finalize startup runtime state".to_string()),
+        )
+        .await;
+    info!("===================== Telegram Startup =====================");
+    info!(
+        "  DC/ME Initialized in {} second{}",
+        initialized_secs, second_suffix
+    );
+    info!("============================================================");
+
+    if let Some(pool) = me_pool {
+        pool.set_runtime_ready(true);
+    }
+    *api_me_pool.write().await = me_pool.clone();
+}

src/maestro/helpers.rs

@@ -0,0 +1,548 @@
+#![allow(clippy::items_after_test_module)]
+
+use std::path::PathBuf;
+use std::time::Duration;
+
+use tokio::sync::watch;
+use tracing::{debug, error, info, warn};
+
+use crate::cli;
+use crate::config::ProxyConfig;
+use crate::logging::LogDestination;
+use crate::transport::UpstreamManager;
+use crate::transport::middle_proxy::{
+    ProxyConfigData, fetch_proxy_config_with_raw_via_upstream, load_proxy_config_cache,
+    save_proxy_config_cache,
+};
+
+pub(crate) fn resolve_runtime_config_path(
+    config_path_cli: &str,
+    startup_cwd: &std::path::Path,
+    config_path_explicit: bool,
+) -> PathBuf {
+    if config_path_explicit {
+        let raw = PathBuf::from(config_path_cli);
+        let absolute = if raw.is_absolute() {
+            raw
+        } else {
+            startup_cwd.join(raw)
+        };
+        return absolute.canonicalize().unwrap_or(absolute);
+    }
+
+    let etc_telemt = std::path::Path::new("/etc/telemt");
+    let candidates = [
+        startup_cwd.join("config.toml"),
+        startup_cwd.join("telemt.toml"),
+        etc_telemt.join("telemt.toml"),
+        etc_telemt.join("config.toml"),
+    ];
+    for candidate in candidates {
+        if candidate.is_file() {
+            return candidate.canonicalize().unwrap_or(candidate);
+        }
+    }
+
+    startup_cwd.join("config.toml")
+}
+
+/// Parsed CLI arguments.
+pub(crate) struct CliArgs {
+    pub config_path: String,
+    pub config_path_explicit: bool,
+    pub data_path: Option<PathBuf>,
+    pub silent: bool,
+    pub log_level: Option<String>,
+    pub log_destination: LogDestination,
+}
+
+pub(crate) fn parse_cli() -> CliArgs {
+    let mut config_path = "config.toml".to_string();
+    let mut config_path_explicit = false;
+    let mut data_path: Option<PathBuf> = None;
+    let mut silent = false;
+    let mut log_level: Option<String> = None;
+
+    let args: Vec<String> = std::env::args().skip(1).collect();
+
+    // Parse log destination
+    let log_destination = crate::logging::parse_log_destination(&args);
+
+    // Check for --init first (handled before tokio)
+    if let Some(init_opts) = cli::parse_init_args(&args) {
+        if let Err(e) = cli::run_init(init_opts) {
+            eprintln!("[telemt] Init failed: {}", e);
+            std::process::exit(1);
+        }
+        std::process::exit(0);
+    }
+
+    let mut i = 0;
+    while i < args.len() {
+        match args[i].as_str() {
+            "--data-path" => {
+                i += 1;
+                if i < args.len() {
+                    data_path = Some(PathBuf::from(args[i].clone()));
+                } else {
+                    eprintln!("Missing value for --data-path");
+                    std::process::exit(0);
+                }
+            }
+            s if s.starts_with("--data-path=") => {
+                data_path = Some(PathBuf::from(
+                    s.trim_start_matches("--data-path=").to_string(),
+                ));
+            }
+            "--working-dir" => {
+                i += 1;
+                if i < args.len() {
+                    data_path = Some(PathBuf::from(args[i].clone()));
+                } else {
+                    eprintln!("Missing value for --working-dir");
+                    std::process::exit(0);
+                }
+            }
+            s if s.starts_with("--working-dir=") => {
+                data_path = Some(PathBuf::from(
+                    s.trim_start_matches("--working-dir=").to_string(),
+                ));
+            }
+            "--silent" | "-s" => {
+                silent = true;
+            }
+            "--log-level" => {
+                i += 1;
+                if i < args.len() {
+                    log_level = Some(args[i].clone());
+                }
+            }
+            s if s.starts_with("--log-level=") => {
+                log_level = Some(s.trim_start_matches("--log-level=").to_string());
+            }
+            "--help" | "-h" => {
+                print_help();
+                std::process::exit(0);
+            }
+            "--version" | "-V" => {
+                println!("telemt {}", env!("CARGO_PKG_VERSION"));
+                std::process::exit(0);
+            }
+            // Skip daemon-related flags (already parsed)
+            "--daemon" | "-d" | "--foreground" | "-f" => {}
+            s if s.starts_with("--pid-file") => {
+                if !s.contains('=') {
+                    i += 1; // skip value
+                }
+            }
+            s if s.starts_with("--run-as-user") => {
+                if !s.contains('=') {
+                    i += 1;
+                }
+            }
+            s if s.starts_with("--run-as-group") => {
+                if !s.contains('=') {
+                    i += 1;
+                }
+            }
+            s if !s.starts_with('-') => {
+                if !matches!(s, "run" | "start" | "stop" | "reload" | "status") {
+                    config_path = s.to_string();
+                    config_path_explicit = true;
+                }
+            }
+            other => {
+                eprintln!("Unknown option: {}", other);
+            }
+        }
+        i += 1;
+    }
+
+    CliArgs {
+        config_path,
+        config_path_explicit,
+        data_path,
+        silent,
+        log_level,
+        log_destination,
+    }
+}
+
+fn print_help() {
+    eprintln!("Usage: telemt [COMMAND] [OPTIONS] [config.toml]");
+    eprintln!();
+    eprintln!("Commands:");
+    eprintln!("  run                     Run in foreground (default if no command given)");
+    #[cfg(unix)]
+    {
+        eprintln!("  start                   Start as background daemon");
+        eprintln!("  stop                    Stop a running daemon");
+        eprintln!("  reload                  Reload configuration (send SIGHUP)");
+        eprintln!("  status                  Check if daemon is running");
+    }
+    eprintln!();
+    eprintln!("Options:");
+    eprintln!(
+        "  --data-path <DIR>       Set data directory (absolute path; overrides config value)"
+    );
+    eprintln!("  --working-dir <DIR>     Alias for --data-path");
+    eprintln!("  --silent, -s            Suppress info logs");
+    eprintln!("  --log-level <LEVEL>     debug|verbose|normal|silent");
+    eprintln!("  --help, -h              Show this help");
+    eprintln!("  --version, -V           Show version");
+    eprintln!();
+    eprintln!("Logging options:");
+    eprintln!("  --log-file <PATH>       Log to file (default: stderr)");
+    eprintln!("  --log-file-daily <PATH> Log to file with daily rotation");
+    #[cfg(unix)]
+    eprintln!("  --syslog                Log to syslog (Unix only)");
+    eprintln!();
+    #[cfg(unix)]
+    {
+        eprintln!("Daemon options (Unix only):");
+        eprintln!("  --daemon, -d            Fork to background (daemonize)");
+        eprintln!("  --foreground, -f        Explicit foreground mode (for systemd)");
+        eprintln!("  --pid-file <PATH>       PID file path (default: /var/run/telemt.pid)");
+        eprintln!("  --run-as-user <USER>    Drop privileges to this user after binding");
+        eprintln!("  --run-as-group <GROUP>  Drop privileges to this group after binding");
+        eprintln!("  --working-dir <DIR>     Working directory for daemon mode");
+        eprintln!();
+    }
+    eprintln!("Setup (fire-and-forget):");
+    eprintln!("  --init                  Generate config, install systemd service, start");
+    eprintln!("    --port <PORT>          Listen port (default: 443)");
+    eprintln!("    --domain <DOMAIN>      TLS domain for masking (default: www.google.com)");
+    eprintln!("    --secret <HEX>         32-char hex secret (auto-generated if omitted)");
+    eprintln!("    --user <NAME>          Username (default: user)");
+    eprintln!("    --config-dir <DIR>     Config directory (default: /etc/telemt)");
+    eprintln!("    --no-start             Don't start the service after install");
+    #[cfg(unix)]
+    {
+        eprintln!();
+        eprintln!("Examples:");
+        eprintln!("  telemt config.toml                    Run in foreground");
+        eprintln!("  telemt start config.toml              Start as daemon");
+        eprintln!("  telemt start --pid-file /tmp/t.pid    Start with custom PID file");
+        eprintln!("  telemt stop                           Stop daemon");
+        eprintln!("  telemt reload                         Reload configuration");
+        eprintln!("  telemt status                         Check daemon status");
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::resolve_runtime_config_path;
+
+    #[test]
+    fn resolve_runtime_config_path_anchors_relative_to_startup_cwd() {
+        let nonce = std::time::SystemTime::now()
+            .duration_since(std::time::UNIX_EPOCH)
+            .unwrap()
+            .as_nanos();
+        let startup_cwd = std::env::temp_dir().join(format!("telemt_cfg_path_{nonce}"));
+        std::fs::create_dir_all(&startup_cwd).unwrap();
+        let target = startup_cwd.join("config.toml");
+        std::fs::write(&target, " ").unwrap();
+
+        let resolved = resolve_runtime_config_path("config.toml", &startup_cwd, true);
+        assert_eq!(resolved, target.canonicalize().unwrap());
+
+        let _ = std::fs::remove_file(&target);
+        let _ = std::fs::remove_dir(&startup_cwd);
+    }
+
+    #[test]
+    fn resolve_runtime_config_path_keeps_absolute_for_missing_file() {
+        let nonce = std::time::SystemTime::now()
+            .duration_since(std::time::UNIX_EPOCH)
+            .unwrap()
+            .as_nanos();
+        let startup_cwd = std::env::temp_dir().join(format!("telemt_cfg_path_missing_{nonce}"));
+        std::fs::create_dir_all(&startup_cwd).unwrap();
+
+        let resolved = resolve_runtime_config_path("missing.toml", &startup_cwd, true);
+        assert_eq!(resolved, startup_cwd.join("missing.toml"));
+
+        let _ = std::fs::remove_dir(&startup_cwd);
+    }
+
+    #[test]
+    fn resolve_runtime_config_path_uses_startup_candidates_when_not_explicit() {
+        let nonce = std::time::SystemTime::now()
+            .duration_since(std::time::UNIX_EPOCH)
+            .unwrap()
+            .as_nanos();
+        let startup_cwd =
+            std::env::temp_dir().join(format!("telemt_cfg_startup_candidates_{nonce}"));
+        std::fs::create_dir_all(&startup_cwd).unwrap();
+        let telemt = startup_cwd.join("telemt.toml");
+        std::fs::write(&telemt, " ").unwrap();
+
+        let resolved = resolve_runtime_config_path("config.toml", &startup_cwd, false);
+        assert_eq!(resolved, telemt.canonicalize().unwrap());
+
+        let _ = std::fs::remove_file(&telemt);
+        let _ = std::fs::remove_dir(&startup_cwd);
+    }
+
+    #[test]
+    fn resolve_runtime_config_path_defaults_to_startup_config_when_none_found() {
+        let nonce = std::time::SystemTime::now()
+            .duration_since(std::time::UNIX_EPOCH)
+            .unwrap()
+            .as_nanos();
+        let startup_cwd = std::env::temp_dir().join(format!("telemt_cfg_startup_default_{nonce}"));
+        std::fs::create_dir_all(&startup_cwd).unwrap();
+
+        let resolved = resolve_runtime_config_path("config.toml", &startup_cwd, false);
+        assert_eq!(resolved, startup_cwd.join("config.toml"));
+
+        let _ = std::fs::remove_dir(&startup_cwd);
+    }
+}
+
+pub(crate) fn print_proxy_links(host: &str, port: u16, config: &ProxyConfig) {
+    info!(target: "telemt::links", "--- Proxy Links ({}) ---", host);
+    for user_name in config
+        .general
+        .links
+        .show
+        .resolve_users(&config.access.users)
+    {
+        if let Some(secret) = config.access.users.get(user_name) {
+            info!(target: "telemt::links", "User: {}", user_name);
+            if config.general.modes.classic {
+                info!(
+                    target: "telemt::links",
+                    "  Classic: tg://proxy?server={}&port={}&secret={}",
+                    host, port, secret
+                );
+            }
+            if config.general.modes.secure {
+                info!(
+                    target: "telemt::links",
+                    "  DD:      tg://proxy?server={}&port={}&secret=dd{}",
+                    host, port, secret
+                );
+            }
+            if config.general.modes.tls {
+                let mut domains = Vec::with_capacity(1 + config.censorship.tls_domains.len());
+                domains.push(config.censorship.tls_domain.clone());
+                for d in &config.censorship.tls_domains {
+                    if !domains.contains(d) {
+                        domains.push(d.clone());
+                    }
+                }
+
+                for domain in domains {
+                    let domain_hex = hex::encode(&domain);
+                    info!(
+                        target: "telemt::links",
+                        "  EE-TLS:  tg://proxy?server={}&port={}&secret=ee{}{}",
+                        host, port, secret, domain_hex
+                    );
+                }
+            }
+        } else {
+            warn!(target: "telemt::links", "User '{}' in show_link not found", user_name);
+        }
+    }
+    info!(target: "telemt::links", "------------------------");
+}
+
+pub(crate) async fn write_beobachten_snapshot(path: &str, payload: &str) -> std::io::Result<()> {
+    if let Some(parent) = std::path::Path::new(path).parent()
+        && !parent.as_os_str().is_empty()
+    {
+        tokio::fs::create_dir_all(parent).await?;
+    }
+    tokio::fs::write(path, payload).await
+}
+
+pub(crate) fn unit_label(value: u64, singular: &'static str, plural: &'static str) -> &'static str {
+    if value == 1 { singular } else { plural }
+}
+
+pub(crate) fn format_uptime(total_secs: u64) -> String {
+    const SECS_PER_MINUTE: u64 = 60;
+    const SECS_PER_HOUR: u64 = 60 * SECS_PER_MINUTE;
+    const SECS_PER_DAY: u64 = 24 * SECS_PER_HOUR;
+    const SECS_PER_MONTH: u64 = 30 * SECS_PER_DAY;
+    const SECS_PER_YEAR: u64 = 12 * SECS_PER_MONTH;
+
+    let mut remaining = total_secs;
+    let years = remaining / SECS_PER_YEAR;
+    remaining %= SECS_PER_YEAR;
+    let months = remaining / SECS_PER_MONTH;
+    remaining %= SECS_PER_MONTH;
+    let days = remaining / SECS_PER_DAY;
+    remaining %= SECS_PER_DAY;
+    let hours = remaining / SECS_PER_HOUR;
+    remaining %= SECS_PER_HOUR;
+    let minutes = remaining / SECS_PER_MINUTE;
+    let seconds = remaining % SECS_PER_MINUTE;
+
+    let mut parts = Vec::new();
+    if total_secs > SECS_PER_YEAR {
+        parts.push(format!("{} {}", years, unit_label(years, "year", "years")));
+    }
+    if total_secs > SECS_PER_MONTH {
+        parts.push(format!(
+            "{} {}",
+            months,
+            unit_label(months, "month", "months")
+        ));
+    }
+    if total_secs > SECS_PER_DAY {
+        parts.push(format!("{} {}", days, unit_label(days, "day", "days")));
+    }
+    if total_secs > SECS_PER_HOUR {
+        parts.push(format!("{} {}", hours, unit_label(hours, "hour", "hours")));
+    }
+    if total_secs > SECS_PER_MINUTE {
+        parts.push(format!(
+            "{} {}",
+            minutes,
+            unit_label(minutes, "minute", "minutes")
+        ));
+    }
+    parts.push(format!(
+        "{} {}",
+        seconds,
+        unit_label(seconds, "second", "seconds")
+    ));
+
+    format!("{} / {} seconds", parts.join(", "), total_secs)
+}
+
+#[allow(dead_code)]
+pub(crate) async fn wait_until_admission_open(admission_rx: &mut watch::Receiver<bool>) -> bool {
+    loop {
+        if *admission_rx.borrow() {
+            return true;
+        }
+        if admission_rx.changed().await.is_err() {
+            return *admission_rx.borrow();
+        }
+    }
+}
+
+pub(crate) fn is_expected_handshake_eof(err: &crate::error::ProxyError) -> bool {
+    err.to_string().contains("expected 64 bytes, got 0")
+}
+
+pub(crate) async fn load_startup_proxy_config_snapshot(
+    url: &str,
+    cache_path: Option<&str>,
+    me2dc_fallback: bool,
+    label: &'static str,
+    upstream: Option<std::sync::Arc<UpstreamManager>>,
+) -> Option<ProxyConfigData> {
+    loop {
+        match fetch_proxy_config_with_raw_via_upstream(url, upstream.clone()).await {
+            Ok((cfg, raw)) => {
+                if !cfg.map.is_empty() {
+                    if let Some(path) = cache_path
+                        && let Err(e) = save_proxy_config_cache(path, &raw).await
+                    {
+                        warn!(error = %e, path, snapshot = label, "Failed to store startup proxy-config cache");
+                    }
+                    return Some(cfg);
+                }
+
+                warn!(
+                    snapshot = label,
+                    url, "Startup proxy-config is empty; trying disk cache"
+                );
+                if let Some(path) = cache_path {
+                    match load_proxy_config_cache(path).await {
+                        Ok(cached) if !cached.map.is_empty() => {
+                            info!(
+                                snapshot = label,
+                                path,
+                                proxy_for_lines = cached.proxy_for_lines,
+                                "Loaded startup proxy-config from disk cache"
+                            );
+                            return Some(cached);
+                        }
+                        Ok(_) => {
+                            warn!(
+                                snapshot = label,
+                                path, "Startup proxy-config cache is empty; ignoring cache file"
+                            );
+                        }
+                        Err(cache_err) => {
+                            debug!(
+                                snapshot = label,
+                                path,
+                                error = %cache_err,
+                                "Startup proxy-config cache unavailable"
+                            );
+                        }
+                    }
+                }
+
+                if me2dc_fallback {
+                    error!(
+                        snapshot = label,
+                        "Startup proxy-config unavailable and no saved config found; falling back to direct mode"
+                    );
+                    return None;
+                }
+
+                warn!(
+                    snapshot = label,
+                    retry_in_secs = 2,
+                    "Startup proxy-config unavailable and no saved config found; retrying because me2dc_fallback=false"
+                );
+                tokio::time::sleep(Duration::from_secs(2)).await;
+            }
+            Err(fetch_err) => {
+                if let Some(path) = cache_path {
+                    match load_proxy_config_cache(path).await {
+                        Ok(cached) if !cached.map.is_empty() => {
+                            info!(
+                                snapshot = label,
+                                path,
+                                proxy_for_lines = cached.proxy_for_lines,
+                                "Loaded startup proxy-config from disk cache"
+                            );
+                            return Some(cached);
+                        }
+                        Ok(_) => {
+                            warn!(
+                                snapshot = label,
+                                path, "Startup proxy-config cache is empty; ignoring cache file"
+                            );
+                        }
+                        Err(cache_err) => {
+                            debug!(
+                                snapshot = label,
+                                path,
+                                error = %cache_err,
+                                "Startup proxy-config cache unavailable"
+                            );
+                        }
+                    }
+                }
+
+                if me2dc_fallback {
+                    error!(
+                        snapshot = label,
+                        error = %fetch_err,
+                        "Startup proxy-config unavailable and no cached data; falling back to direct mode"
+                    );
+                    return None;
+                }
+
+                warn!(
+                    snapshot = label,
+                    error = %fetch_err,
+                    retry_in_secs = 2,
+                    "Startup proxy-config unavailable; retrying because me2dc_fallback=false"
+                );
+                tokio::time::sleep(Duration::from_secs(2)).await;
+            }
+        }
+    }
+}

src/maestro/listeners.rs

@@ -0,0 +1,546 @@
+use std::error::Error;
+use std::net::{IpAddr, SocketAddr};
+use std::sync::Arc;
+use std::time::Duration;
+
+use tokio::net::TcpListener;
+#[cfg(unix)]
+use tokio::net::UnixListener;
+use tokio::sync::{Semaphore, watch};
+use tracing::{debug, error, info, warn};
+
+use crate::config::ProxyConfig;
+use crate::crypto::SecureRandom;
+use crate::ip_tracker::UserIpTracker;
+use crate::proxy::ClientHandler;
+use crate::proxy::route_mode::{ROUTE_SWITCH_ERROR_MSG, RouteRuntimeController};
+use crate::proxy::shared_state::ProxySharedState;
+use crate::startup::{COMPONENT_LISTENERS_BIND, StartupTracker};
+use crate::stats::beobachten::BeobachtenStore;
+use crate::stats::{ReplayChecker, Stats};
+use crate::stream::BufferPool;
+use crate::tls_front::TlsFrontCache;
+use crate::transport::middle_proxy::MePool;
+use crate::transport::{ListenOptions, UpstreamManager, create_listener, find_listener_processes};
+
+use super::helpers::{is_expected_handshake_eof, print_proxy_links};
+
+pub(crate) struct BoundListeners {
+    pub(crate) listeners: Vec<(TcpListener, bool)>,
+    pub(crate) has_unix_listener: bool,
+}
+
+#[allow(clippy::too_many_arguments)]
+pub(crate) async fn bind_listeners(
+    config: &Arc<ProxyConfig>,
+    decision_ipv4_dc: bool,
+    decision_ipv6_dc: bool,
+    detected_ip_v4: Option<IpAddr>,
+    detected_ip_v6: Option<IpAddr>,
+    startup_tracker: &Arc<StartupTracker>,
+    config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    admission_rx: watch::Receiver<bool>,
+    stats: Arc<Stats>,
+    upstream_manager: Arc<UpstreamManager>,
+    replay_checker: Arc<ReplayChecker>,
+    buffer_pool: Arc<BufferPool>,
+    rng: Arc<SecureRandom>,
+    me_pool: Option<Arc<MePool>>,
+    route_runtime: Arc<RouteRuntimeController>,
+    tls_cache: Option<Arc<TlsFrontCache>>,
+    ip_tracker: Arc<UserIpTracker>,
+    beobachten: Arc<BeobachtenStore>,
+    shared: Arc<ProxySharedState>,
+    max_connections: Arc<Semaphore>,
+) -> Result<BoundListeners, Box<dyn Error>> {
+    startup_tracker
+        .start_component(
+            COMPONENT_LISTENERS_BIND,
+            Some("bind TCP/Unix listeners".to_string()),
+        )
+        .await;
+    let mut listeners = Vec::new();
+
+    for listener_conf in &config.server.listeners {
+        let addr = SocketAddr::new(listener_conf.ip, config.server.port);
+        if addr.is_ipv4() && !decision_ipv4_dc {
+            warn!(%addr, "Skipping IPv4 listener: IPv4 disabled by [network]");
+            continue;
+        }
+        if addr.is_ipv6() && !decision_ipv6_dc {
+            warn!(%addr, "Skipping IPv6 listener: IPv6 disabled by [network]");
+            continue;
+        }
+        let options = ListenOptions {
+            reuse_port: listener_conf.reuse_allow,
+            ipv6_only: listener_conf.ip.is_ipv6(),
+            backlog: config.server.listen_backlog,
+            ..Default::default()
+        };
+
+        match create_listener(addr, &options) {
+            Ok(socket) => {
+                let listener = TcpListener::from_std(socket.into())?;
+                info!("Listening on {}", addr);
+                let listener_proxy_protocol = listener_conf
+                    .proxy_protocol
+                    .unwrap_or(config.server.proxy_protocol);
+
+                let public_host = if let Some(ref announce) = listener_conf.announce {
+                    announce.clone()
+                } else if listener_conf.ip.is_unspecified() {
+                    if listener_conf.ip.is_ipv4() {
+                        detected_ip_v4
+                            .map(|ip| ip.to_string())
+                            .unwrap_or_else(|| listener_conf.ip.to_string())
+                    } else {
+                        detected_ip_v6
+                            .map(|ip| ip.to_string())
+                            .unwrap_or_else(|| listener_conf.ip.to_string())
+                    }
+                } else {
+                    listener_conf.ip.to_string()
+                };
+
+                if config.general.links.public_host.is_none()
+                    && !config.general.links.show.is_empty()
+                {
+                    let link_port = config
+                        .general
+                        .links
+                        .public_port
+                        .unwrap_or(config.server.port);
+                    print_proxy_links(&public_host, link_port, config);
+                }
+
+                listeners.push((listener, listener_proxy_protocol));
+            }
+            Err(e) => {
+                if e.kind() == std::io::ErrorKind::AddrInUse {
+                    let owners = find_listener_processes(addr);
+                    if owners.is_empty() {
+                        error!(
+                            %addr,
+                            "Failed to bind: address already in use (owner process unresolved)"
+                        );
+                    } else {
+                        for owner in owners {
+                            error!(
+                                %addr,
+                                pid = owner.pid,
+                                process = %owner.process,
+                                "Failed to bind: address already in use"
+                            );
+                        }
+                    }
+
+                    if !listener_conf.reuse_allow {
+                        error!(
+                            %addr,
+                            "reuse_allow=false; set [[server.listeners]].reuse_allow=true to allow multi-instance listening"
+                        );
+                    }
+                } else {
+                    error!("Failed to bind to {}: {}", addr, e);
+                }
+            }
+        }
+    }
+
+    if !config.general.links.show.is_empty()
+        && (config.general.links.public_host.is_some() || listeners.is_empty())
+    {
+        let (host, port) = if let Some(ref h) = config.general.links.public_host {
+            (
+                h.clone(),
+                config
+                    .general
+                    .links
+                    .public_port
+                    .unwrap_or(config.server.port),
+            )
+        } else {
+            let ip = detected_ip_v4.or(detected_ip_v6).map(|ip| ip.to_string());
+            if ip.is_none() {
+                warn!(
+                    "show_link is configured but public IP could not be detected. Set public_host in config."
+                );
+            }
+            (
+                ip.unwrap_or_else(|| "UNKNOWN".to_string()),
+                config
+                    .general
+                    .links
+                    .public_port
+                    .unwrap_or(config.server.port),
+            )
+        };
+
+        print_proxy_links(&host, port, config);
+    }
+
+    let mut has_unix_listener = false;
+    #[cfg(unix)]
+    if let Some(ref unix_path) = config.server.listen_unix_sock {
+        let _ = tokio::fs::remove_file(unix_path).await;
+
+        let unix_listener = UnixListener::bind(unix_path)?;
+
+        if let Some(ref perm_str) = config.server.listen_unix_sock_perm {
+            match u32::from_str_radix(perm_str.trim_start_matches('0'), 8) {
+                Ok(mode) => {
+                    use std::os::unix::fs::PermissionsExt;
+                    let perms = std::fs::Permissions::from_mode(mode);
+                    if let Err(e) = std::fs::set_permissions(unix_path, perms) {
+                        error!(
+                            "Failed to set unix socket permissions to {}: {}",
+                            perm_str, e
+                        );
+                    } else {
+                        info!("Listening on unix:{} (mode {})", unix_path, perm_str);
+                    }
+                }
+                Err(e) => {
+                    warn!(
+                        "Invalid listen_unix_sock_perm '{}': {}. Ignoring.",
+                        perm_str, e
+                    );
+                    info!("Listening on unix:{}", unix_path);
+                }
+            }
+        } else {
+            info!("Listening on unix:{}", unix_path);
+        }
+
+        has_unix_listener = true;
+
+        let mut config_rx_unix: watch::Receiver<Arc<ProxyConfig>> = config_rx.clone();
+        let admission_rx_unix = admission_rx.clone();
+        let stats = stats.clone();
+        let upstream_manager = upstream_manager.clone();
+        let replay_checker = replay_checker.clone();
+        let buffer_pool = buffer_pool.clone();
+        let rng = rng.clone();
+        let me_pool = me_pool.clone();
+        let route_runtime = route_runtime.clone();
+        let tls_cache = tls_cache.clone();
+        let ip_tracker = ip_tracker.clone();
+        let beobachten = beobachten.clone();
+        let shared = shared.clone();
+        let max_connections_unix = max_connections.clone();
+
+        tokio::spawn(async move {
+            let unix_conn_counter = Arc::new(std::sync::atomic::AtomicU64::new(1));
+
+            loop {
+                match unix_listener.accept().await {
+                    Ok((stream, _)) => {
+                        if !*admission_rx_unix.borrow() {
+                            drop(stream);
+                            continue;
+                        }
+                        let accept_permit_timeout_ms =
+                            config_rx_unix.borrow().server.accept_permit_timeout_ms;
+                        let permit = if accept_permit_timeout_ms == 0 {
+                            match max_connections_unix.clone().acquire_owned().await {
+                                Ok(permit) => permit,
+                                Err(_) => {
+                                    error!("Connection limiter is closed");
+                                    break;
+                                }
+                            }
+                        } else {
+                            match tokio::time::timeout(
+                                Duration::from_millis(accept_permit_timeout_ms),
+                                max_connections_unix.clone().acquire_owned(),
+                            )
+                            .await
+                            {
+                                Ok(Ok(permit)) => permit,
+                                Ok(Err(_)) => {
+                                    error!("Connection limiter is closed");
+                                    break;
+                                }
+                                Err(_) => {
+                                    stats.increment_accept_permit_timeout_total();
+                                    debug!(
+                                        timeout_ms = accept_permit_timeout_ms,
+                                        "Dropping accepted unix connection: permit wait timeout"
+                                    );
+                                    drop(stream);
+                                    continue;
+                                }
+                            }
+                        };
+                        let conn_id =
+                            unix_conn_counter.fetch_add(1, std::sync::atomic::Ordering::Relaxed);
+                        let fake_peer =
+                            SocketAddr::from(([127, 0, 0, 1], (conn_id % 65535) as u16));
+
+                        let config = config_rx_unix.borrow_and_update().clone();
+                        let stats = stats.clone();
+                        let upstream_manager = upstream_manager.clone();
+                        let replay_checker = replay_checker.clone();
+                        let buffer_pool = buffer_pool.clone();
+                        let rng = rng.clone();
+                        let me_pool = me_pool.clone();
+                        let route_runtime = route_runtime.clone();
+                        let tls_cache = tls_cache.clone();
+                        let ip_tracker = ip_tracker.clone();
+                        let beobachten = beobachten.clone();
+                        let shared = shared.clone();
+                        let proxy_protocol_enabled = config.server.proxy_protocol;
+
+                        tokio::spawn(async move {
+                            let _permit = permit;
+                            if let Err(e) = crate::proxy::client::handle_client_stream_with_shared(
+                                stream,
+                                fake_peer,
+                                config,
+                                stats,
+                                upstream_manager,
+                                replay_checker,
+                                buffer_pool,
+                                rng,
+                                me_pool,
+                                route_runtime,
+                                tls_cache,
+                                ip_tracker,
+                                beobachten,
+                                shared,
+                                proxy_protocol_enabled,
+                            )
+                            .await
+                            {
+                                debug!(error = %e, "Unix socket connection error");
+                            }
+                        });
+                    }
+                    Err(e) => {
+                        error!("Unix socket accept error: {}", e);
+                        tokio::time::sleep(Duration::from_millis(100)).await;
+                    }
+                }
+            }
+        });
+    }
+
+    startup_tracker
+        .complete_component(
+            COMPONENT_LISTENERS_BIND,
+            Some(format!(
+                "listeners configured tcp={} unix={}",
+                listeners.len(),
+                has_unix_listener
+            )),
+        )
+        .await;
+
+    Ok(BoundListeners {
+        listeners,
+        has_unix_listener,
+    })
+}
+
+#[allow(clippy::too_many_arguments)]
+pub(crate) fn spawn_tcp_accept_loops(
+    listeners: Vec<(TcpListener, bool)>,
+    config_rx: watch::Receiver<Arc<ProxyConfig>>,
+    admission_rx: watch::Receiver<bool>,
+    stats: Arc<Stats>,
+    upstream_manager: Arc<UpstreamManager>,
+    replay_checker: Arc<ReplayChecker>,
+    buffer_pool: Arc<BufferPool>,
+    rng: Arc<SecureRandom>,
+    me_pool: Option<Arc<MePool>>,
+    route_runtime: Arc<RouteRuntimeController>,
+    tls_cache: Option<Arc<TlsFrontCache>>,
+    ip_tracker: Arc<UserIpTracker>,
+    beobachten: Arc<BeobachtenStore>,
+    shared: Arc<ProxySharedState>,
+    max_connections: Arc<Semaphore>,
+) {
+    for (listener, listener_proxy_protocol) in listeners {
+        let mut config_rx: watch::Receiver<Arc<ProxyConfig>> = config_rx.clone();
+        let admission_rx_tcp = admission_rx.clone();
+        let stats = stats.clone();
+        let upstream_manager = upstream_manager.clone();
+        let replay_checker = replay_checker.clone();
+        let buffer_pool = buffer_pool.clone();
+        let rng = rng.clone();
+        let me_pool = me_pool.clone();
+        let route_runtime = route_runtime.clone();
+        let tls_cache = tls_cache.clone();
+        let ip_tracker = ip_tracker.clone();
+        let beobachten = beobachten.clone();
+        let shared = shared.clone();
+        let max_connections_tcp = max_connections.clone();
+
+        tokio::spawn(async move {
+            loop {
+                match listener.accept().await {
+                    Ok((stream, peer_addr)) => {
+                        if !*admission_rx_tcp.borrow() {
+                            debug!(peer = %peer_addr, "Admission gate closed, dropping connection");
+                            drop(stream);
+                            continue;
+                        }
+                        let accept_permit_timeout_ms =
+                            config_rx.borrow().server.accept_permit_timeout_ms;
+                        let permit = if accept_permit_timeout_ms == 0 {
+                            match max_connections_tcp.clone().acquire_owned().await {
+                                Ok(permit) => permit,
+                                Err(_) => {
+                                    error!("Connection limiter is closed");
+                                    break;
+                                }
+                            }
+                        } else {
+                            match tokio::time::timeout(
+                                Duration::from_millis(accept_permit_timeout_ms),
+                                max_connections_tcp.clone().acquire_owned(),
+                            )
+                            .await
+                            {
+                                Ok(Ok(permit)) => permit,
+                                Ok(Err(_)) => {
+                                    error!("Connection limiter is closed");
+                                    break;
+                                }
+                                Err(_) => {
+                                    stats.increment_accept_permit_timeout_total();
+                                    debug!(
+                                        peer = %peer_addr,
+                                        timeout_ms = accept_permit_timeout_ms,
+                                        "Dropping accepted connection: permit wait timeout"
+                                    );
+                                    drop(stream);
+                                    continue;
+                                }
+                            }
+                        };
+                        let config = config_rx.borrow_and_update().clone();
+                        let stats = stats.clone();
+                        let upstream_manager = upstream_manager.clone();
+                        let replay_checker = replay_checker.clone();
+                        let buffer_pool = buffer_pool.clone();
+                        let rng = rng.clone();
+                        let me_pool = me_pool.clone();
+                        let route_runtime = route_runtime.clone();
+                        let tls_cache = tls_cache.clone();
+                        let ip_tracker = ip_tracker.clone();
+                        let beobachten = beobachten.clone();
+                        let shared = shared.clone();
+                        let proxy_protocol_enabled = listener_proxy_protocol;
+                        let real_peer_report = Arc::new(std::sync::Mutex::new(None));
+                        let real_peer_report_for_handler = real_peer_report.clone();
+
+                        tokio::spawn(async move {
+                            let _permit = permit;
+                            if let Err(e) = ClientHandler::new_with_shared(
+                                stream,
+                                peer_addr,
+                                config,
+                                stats,
+                                upstream_manager,
+                                replay_checker,
+                                buffer_pool,
+                                rng,
+                                me_pool,
+                                route_runtime,
+                                tls_cache,
+                                ip_tracker,
+                                beobachten,
+                                shared,
+                                proxy_protocol_enabled,
+                                real_peer_report_for_handler,
+                            )
+                            .run()
+                            .await
+                            {
+                                let real_peer = match real_peer_report.lock() {
+                                    Ok(guard) => *guard,
+                                    Err(_) => None,
+                                };
+                                let peer_closed = matches!(
+                                    &e,
+                                    crate::error::ProxyError::Io(ioe)
+                                        if matches!(
+                                            ioe.kind(),
+                                            std::io::ErrorKind::ConnectionReset
+                                                | std::io::ErrorKind::ConnectionAborted
+                                                | std::io::ErrorKind::BrokenPipe
+                                                | std::io::ErrorKind::NotConnected
+                                        )
+                                ) || matches!(
+                                    &e,
+                                    crate::error::ProxyError::Stream(
+                                        crate::error::StreamError::Io(ioe)
+                                    )
+                                        if matches!(
+                                            ioe.kind(),
+                                            std::io::ErrorKind::ConnectionReset
+                                                | std::io::ErrorKind::ConnectionAborted
+                                                | std::io::ErrorKind::BrokenPipe
+                                                | std::io::ErrorKind::NotConnected
+                                        )
+                                );
+
+                                let me_closed = matches!(
+                                    &e,
+                                    crate::error::ProxyError::Proxy(msg) if msg == "ME connection lost"
+                                );
+                                let route_switched = matches!(
+                                    &e,
+                                    crate::error::ProxyError::Proxy(msg) if msg == ROUTE_SWITCH_ERROR_MSG
+                                );
+
+                                match (peer_closed, me_closed) {
+                                    (true, _) => {
+                                        if let Some(real_peer) = real_peer {
+                                            debug!(peer = %peer_addr, real_peer = %real_peer, error = %e, "Connection closed by client");
+                                        } else {
+                                            debug!(peer = %peer_addr, error = %e, "Connection closed by client");
+                                        }
+                                    }
+                                    (_, true) => {
+                                        if let Some(real_peer) = real_peer {
+                                            warn!(peer = %peer_addr, real_peer = %real_peer, error = %e, "Connection closed: Middle-End dropped session");
+                                        } else {
+                                            warn!(peer = %peer_addr, error = %e, "Connection closed: Middle-End dropped session");
+                                        }
+                                    }
+                                    _ if route_switched => {
+                                        if let Some(real_peer) = real_peer {
+                                            info!(peer = %peer_addr, real_peer = %real_peer, error = %e, "Connection closed by controlled route cutover");
+                                        } else {
+                                            info!(peer = %peer_addr, error = %e, "Connection closed by controlled route cutover");
+                                        }
+                                    }
+                                    _ if is_expected_handshake_eof(&e) => {
+                                        if let Some(real_peer) = real_peer {
+                                            info!(peer = %peer_addr, real_peer = %real_peer, error = %e, "Connection closed during initial handshake");
+                                        } else {
+                                            info!(peer = %peer_addr, error = %e, "Connection closed during initial handshake");
+                                        }
+                                    }
+                                    _ => {
+                                        if let Some(real_peer) = real_peer {
+                                            warn!(peer = %peer_addr, real_peer = %real_peer, error = %e, "Connection closed with error");
+                                        } else {
+                                            warn!(peer = %peer_addr, error = %e, "Connection closed with error");
+                                        }
+                                    }
+                                }
+                            }
+                        });
+                    }
+                    Err(e) => {
+                        error!("Accept error: {}", e);
+                        tokio::time::sleep(Duration::from_millis(100)).await;
+                    }
+                }
+            }
+        });
+    }
+}

src/maestro/me_startup.rs

@@ -0,0 +1,646 @@
+#![allow(clippy::too_many_arguments)]
+
+use std::sync::Arc;
+use std::time::Duration;
+
+use tokio::sync::RwLock;
+use tracing::{error, info, warn};
+
+use crate::config::ProxyConfig;
+use crate::crypto::SecureRandom;
+use crate::network::probe::{NetworkDecision, NetworkProbe};
+use crate::startup::{
+    COMPONENT_ME_POOL_CONSTRUCT, COMPONENT_ME_POOL_INIT_STAGE1, COMPONENT_ME_PROXY_CONFIG_V4,
+    COMPONENT_ME_PROXY_CONFIG_V6, COMPONENT_ME_SECRET_FETCH, StartupMeStatus, StartupTracker,
+};
+use crate::stats::Stats;
+use crate::transport::UpstreamManager;
+use crate::transport::middle_proxy::MePool;
+
+use super::helpers::load_startup_proxy_config_snapshot;
+
+pub(crate) async fn initialize_me_pool(
+    use_middle_proxy: bool,
+    config: &ProxyConfig,
+    decision: &NetworkDecision,
+    probe: &NetworkProbe,
+    startup_tracker: &Arc<StartupTracker>,
+    upstream_manager: Arc<UpstreamManager>,
+    rng: Arc<SecureRandom>,
+    stats: Arc<Stats>,
+    api_me_pool: Arc<RwLock<Option<Arc<MePool>>>>,
+) -> Option<Arc<MePool>> {
+    if !use_middle_proxy {
+        return None;
+    }
+
+    info!("=== Middle Proxy Mode ===");
+    let me_nat_probe = config.general.middle_proxy_nat_probe && config.network.stun_use;
+    if config.general.middle_proxy_nat_probe && !config.network.stun_use {
+        info!("Middle-proxy STUN probing disabled by network.stun_use=false");
+    }
+
+    let me2dc_fallback = config.general.me2dc_fallback;
+    let me_init_retry_attempts = config.general.me_init_retry_attempts;
+    let me_init_warn_after_attempts: u32 = 3;
+
+    // Global ad_tag (pool default). Used when user has no per-user tag in access.user_ad_tags.
+    let proxy_tag = config
+        .general
+        .ad_tag
+        .as_ref()
+        .map(|tag| hex::decode(tag).expect("general.ad_tag must be validated before startup"));
+
+    // =============================================================
+    // CRITICAL: Download Telegram proxy-secret (NOT user secret!)
+    //
+    // C MTProxy uses TWO separate secrets:
+    //   -S flag    = 16-byte user secret for client obfuscation
+    //   --aes-pwd  = 32-512 byte binary file for ME RPC auth
+    //
+    // proxy-secret is from: https://core.telegram.org/getProxySecret
+    // =============================================================
+    let proxy_secret_path = config.general.proxy_secret_path.as_deref();
+    let pool_size = config.general.middle_proxy_pool_size.max(1);
+    let proxy_secret = loop {
+        match crate::transport::middle_proxy::fetch_proxy_secret_with_upstream(
+            proxy_secret_path,
+            config.general.proxy_secret_len_max,
+            Some(upstream_manager.clone()),
+        )
+        .await
+        {
+            Ok(proxy_secret) => break Some(proxy_secret),
+            Err(e) => {
+                startup_tracker.set_me_last_error(Some(e.to_string())).await;
+                if me2dc_fallback {
+                    error!(
+                        error = %e,
+                        "ME startup failed: proxy-secret is unavailable and no saved secret found; falling back to direct mode"
+                    );
+                    break None;
+                }
+
+                warn!(
+                    error = %e,
+                    retry_in_secs = 2,
+                    "ME startup failed: proxy-secret is unavailable and no saved secret found; retrying because me2dc_fallback=false"
+                );
+                tokio::time::sleep(Duration::from_secs(2)).await;
+            }
+        }
+    };
+    match proxy_secret {
+        Some(proxy_secret) => {
+            startup_tracker
+                .complete_component(
+                    COMPONENT_ME_SECRET_FETCH,
+                    Some("proxy-secret loaded".to_string()),
+                )
+                .await;
+            info!(
+                secret_len = proxy_secret.len(),
+                key_sig = format_args!(
+                    "0x{:08x}",
+                    if proxy_secret.len() >= 4 {
+                        u32::from_le_bytes([
+                            proxy_secret[0],
+                            proxy_secret[1],
+                            proxy_secret[2],
+                            proxy_secret[3],
+                        ])
+                    } else {
+                        0
+                    }
+                ),
+                "Proxy-secret loaded"
+            );
+
+            startup_tracker
+                .start_component(
+                    COMPONENT_ME_PROXY_CONFIG_V4,
+                    Some("load startup proxy-config v4".to_string()),
+                )
+                .await;
+            startup_tracker
+                .set_me_status(StartupMeStatus::Initializing, COMPONENT_ME_PROXY_CONFIG_V4)
+                .await;
+            let cfg_v4 = load_startup_proxy_config_snapshot(
+                "https://core.telegram.org/getProxyConfig",
+                config.general.proxy_config_v4_cache_path.as_deref(),
+                me2dc_fallback,
+                "getProxyConfig",
+                Some(upstream_manager.clone()),
+            )
+            .await;
+            if cfg_v4.is_some() {
+                startup_tracker
+                    .complete_component(
+                        COMPONENT_ME_PROXY_CONFIG_V4,
+                        Some("proxy-config v4 loaded".to_string()),
+                    )
+                    .await;
+            } else {
+                startup_tracker
+                    .fail_component(
+                        COMPONENT_ME_PROXY_CONFIG_V4,
+                        Some("proxy-config v4 unavailable".to_string()),
+                    )
+                    .await;
+            }
+            startup_tracker
+                .start_component(
+                    COMPONENT_ME_PROXY_CONFIG_V6,
+                    Some("load startup proxy-config v6".to_string()),
+                )
+                .await;
+            startup_tracker
+                .set_me_status(StartupMeStatus::Initializing, COMPONENT_ME_PROXY_CONFIG_V6)
+                .await;
+            let cfg_v6 = load_startup_proxy_config_snapshot(
+                "https://core.telegram.org/getProxyConfigV6",
+                config.general.proxy_config_v6_cache_path.as_deref(),
+                me2dc_fallback,
+                "getProxyConfigV6",
+                Some(upstream_manager.clone()),
+            )
+            .await;
+            if cfg_v6.is_some() {
+                startup_tracker
+                    .complete_component(
+                        COMPONENT_ME_PROXY_CONFIG_V6,
+                        Some("proxy-config v6 loaded".to_string()),
+                    )
+                    .await;
+            } else {
+                startup_tracker
+                    .fail_component(
+                        COMPONENT_ME_PROXY_CONFIG_V6,
+                        Some("proxy-config v6 unavailable".to_string()),
+                    )
+                    .await;
+            }
+
+            if let (Some(cfg_v4), Some(cfg_v6)) = (cfg_v4, cfg_v6) {
+                startup_tracker
+                    .start_component(
+                        COMPONENT_ME_POOL_CONSTRUCT,
+                        Some("construct ME pool".to_string()),
+                    )
+                    .await;
+                startup_tracker
+                    .set_me_status(StartupMeStatus::Initializing, COMPONENT_ME_POOL_CONSTRUCT)
+                    .await;
+                let pool = MePool::new(
+                    proxy_tag.clone(),
+                    proxy_secret,
+                    config.general.middle_proxy_nat_ip,
+                    me_nat_probe,
+                    None,
+                    config.network.stun_servers.clone(),
+                    config.general.stun_nat_probe_concurrency,
+                    probe.detected_ipv6,
+                    config.timeouts.me_one_retry,
+                    config.timeouts.me_one_timeout_ms,
+                    cfg_v4.map.clone(),
+                    cfg_v6.map.clone(),
+                    cfg_v4.default_dc.or(cfg_v6.default_dc),
+                    decision.clone(),
+                    Some(upstream_manager.clone()),
+                    rng.clone(),
+                    stats.clone(),
+                    config.general.me_keepalive_enabled,
+                    config.general.me_keepalive_interval_secs,
+                    config.general.me_keepalive_jitter_secs,
+                    config.general.me_keepalive_payload_random,
+                    config.general.rpc_proxy_req_every,
+                    config.general.me_warmup_stagger_enabled,
+                    config.general.me_warmup_step_delay_ms,
+                    config.general.me_warmup_step_jitter_ms,
+                    config.general.me_reconnect_max_concurrent_per_dc,
+                    config.general.me_reconnect_backoff_base_ms,
+                    config.general.me_reconnect_backoff_cap_ms,
+                    config.general.me_reconnect_fast_retry_count,
+                    config.general.me_single_endpoint_shadow_writers,
+                    config.general.me_single_endpoint_outage_mode_enabled,
+                    config.general.me_single_endpoint_outage_disable_quarantine,
+                    config.general.me_single_endpoint_outage_backoff_min_ms,
+                    config.general.me_single_endpoint_outage_backoff_max_ms,
+                    config.general.me_single_endpoint_shadow_rotate_every_secs,
+                    config.general.me_floor_mode,
+                    config.general.me_adaptive_floor_idle_secs,
+                    config.general.me_adaptive_floor_min_writers_single_endpoint,
+                    config.general.me_adaptive_floor_min_writers_multi_endpoint,
+                    config.general.me_adaptive_floor_recover_grace_secs,
+                    config.general.me_adaptive_floor_writers_per_core_total,
+                    config.general.me_adaptive_floor_cpu_cores_override,
+                    config
+                        .general
+                        .me_adaptive_floor_max_extra_writers_single_per_core,
+                    config
+                        .general
+                        .me_adaptive_floor_max_extra_writers_multi_per_core,
+                    config.general.me_adaptive_floor_max_active_writers_per_core,
+                    config.general.me_adaptive_floor_max_warm_writers_per_core,
+                    config.general.me_adaptive_floor_max_active_writers_global,
+                    config.general.me_adaptive_floor_max_warm_writers_global,
+                    config.general.hardswap,
+                    config.general.me_pool_drain_ttl_secs,
+                    config.general.me_instadrain,
+                    config.general.me_pool_drain_threshold,
+                    config.general.me_pool_drain_soft_evict_enabled,
+                    config.general.me_pool_drain_soft_evict_grace_secs,
+                    config.general.me_pool_drain_soft_evict_per_writer,
+                    config.general.me_pool_drain_soft_evict_budget_per_core,
+                    config.general.me_pool_drain_soft_evict_cooldown_ms,
+                    config.general.effective_me_pool_force_close_secs(),
+                    config.general.me_pool_min_fresh_ratio,
+                    config.general.me_hardswap_warmup_delay_min_ms,
+                    config.general.me_hardswap_warmup_delay_max_ms,
+                    config.general.me_hardswap_warmup_extra_passes,
+                    config.general.me_hardswap_warmup_pass_backoff_base_ms,
+                    config.general.me_bind_stale_mode,
+                    config.general.me_bind_stale_ttl_secs,
+                    config.general.me_secret_atomic_snapshot,
+                    config.general.me_deterministic_writer_sort,
+                    config.general.me_writer_pick_mode,
+                    config.general.me_writer_pick_sample_size,
+                    config.general.me_socks_kdf_policy,
+                    config.general.me_writer_cmd_channel_capacity,
+                    config.general.me_route_channel_capacity,
+                    config.general.me_route_backpressure_base_timeout_ms,
+                    config.general.me_route_backpressure_high_timeout_ms,
+                    config.general.me_route_backpressure_high_watermark_pct,
+                    config.general.me_reader_route_data_wait_ms,
+                    config.general.me_health_interval_ms_unhealthy,
+                    config.general.me_health_interval_ms_healthy,
+                    config.general.me_warn_rate_limit_ms,
+                    config.general.me_route_no_writer_mode,
+                    config.general.me_route_no_writer_wait_ms,
+                    config.general.me_route_hybrid_max_wait_ms,
+                    config.general.me_route_blocking_send_timeout_ms,
+                    config.general.me_route_inline_recovery_attempts,
+                    config.general.me_route_inline_recovery_wait_ms,
+                );
+                startup_tracker
+                    .complete_component(
+                        COMPONENT_ME_POOL_CONSTRUCT,
+                        Some("ME pool object created".to_string()),
+                    )
+                    .await;
+                *api_me_pool.write().await = Some(pool.clone());
+                startup_tracker
+                    .start_component(
+                        COMPONENT_ME_POOL_INIT_STAGE1,
+                        Some("initialize ME pool writers".to_string()),
+                    )
+                    .await;
+                startup_tracker
+                    .set_me_status(StartupMeStatus::Initializing, COMPONENT_ME_POOL_INIT_STAGE1)
+                    .await;
+
+                if me2dc_fallback {
+                    let pool_bg = pool.clone();
+                    let rng_bg = rng.clone();
+                    let startup_tracker_bg = startup_tracker.clone();
+                    let retry_limit = if me_init_retry_attempts == 0 {
+                        String::from("unlimited")
+                    } else {
+                        me_init_retry_attempts.to_string()
+                    };
+                    std::thread::spawn(move || {
+                        let runtime = match tokio::runtime::Builder::new_current_thread()
+                            .enable_all()
+                            .build()
+                        {
+                            Ok(runtime) => runtime,
+                            Err(error) => {
+                                error!(error = %error, "Failed to build background runtime for ME initialization");
+                                return;
+                            }
+                        };
+                        runtime.block_on(async move {
+                            let mut init_attempt: u32 = 0;
+                            loop {
+                                init_attempt = init_attempt.saturating_add(1);
+                                startup_tracker_bg.set_me_init_attempt(init_attempt).await;
+                                match pool_bg.init(pool_size, &rng_bg).await {
+                                    Ok(()) => {
+                                        startup_tracker_bg.set_me_last_error(None).await;
+                                        startup_tracker_bg
+                                            .complete_component(
+                                                COMPONENT_ME_POOL_INIT_STAGE1,
+                                                Some("ME pool initialized".to_string()),
+                                            )
+                                            .await;
+                                        startup_tracker_bg
+                                            .set_me_status(StartupMeStatus::Ready, "ready")
+                                            .await;
+                                        info!(
+                                            attempt = init_attempt,
+                                            "Middle-End pool initialized successfully"
+                                        );
+
+                                            // ── Supervised background tasks ──────────────────
+                                            // Each task runs inside a nested tokio::spawn so
+                                            // that a panic is caught via JoinHandle and the
+                                            // outer loop restarts the task automatically.
+                                            let pool_health = pool_bg.clone();
+                                            let rng_health = rng_bg.clone();
+                                            let min_conns = pool_size;
+                                            tokio::spawn(async move {
+                                                loop {
+                                                    let p = pool_health.clone();
+                                                    let r = rng_health.clone();
+                                                    let res = tokio::spawn(async move {
+                                                        crate::transport::middle_proxy::me_health_monitor(
+                                                            p, r, min_conns,
+                                                        )
+                                                        .await;
+                                                    })
+                                                    .await;
+                                                    match res {
+                                                        Ok(()) => warn!("me_health_monitor exited unexpectedly, restarting"),
+                                                        Err(e) => {
+                                                            error!(error = %e, "me_health_monitor panicked, restarting in 1s");
+                                                            tokio::time::sleep(Duration::from_secs(1)).await;
+                                                        }
+                                                    }
+                                                }
+                                            });
+                                            let pool_drain_enforcer = pool_bg.clone();
+                                            tokio::spawn(async move {
+                                                loop {
+                                                    let p = pool_drain_enforcer.clone();
+                                                    let res = tokio::spawn(async move {
+                                                        crate::transport::middle_proxy::me_drain_timeout_enforcer(p).await;
+                                                    })
+                                                    .await;
+                                                    match res {
+                                                        Ok(()) => warn!("me_drain_timeout_enforcer exited unexpectedly, restarting"),
+                                                        Err(e) => {
+                                                            error!(error = %e, "me_drain_timeout_enforcer panicked, restarting in 1s");
+                                                            tokio::time::sleep(Duration::from_secs(1)).await;
+                                                        }
+                                                    }
+                                                }
+                                            });
+                                            let pool_watchdog = pool_bg.clone();
+                                            tokio::spawn(async move {
+                                                loop {
+                                                    let p = pool_watchdog.clone();
+                                                    let res = tokio::spawn(async move {
+                                                        crate::transport::middle_proxy::me_zombie_writer_watchdog(p).await;
+                                                    })
+                                                    .await;
+                                                    match res {
+                                                        Ok(()) => warn!("me_zombie_writer_watchdog exited unexpectedly, restarting"),
+                                                        Err(e) => {
+                                                            error!(error = %e, "me_zombie_writer_watchdog panicked, restarting in 1s");
+                                                            tokio::time::sleep(Duration::from_secs(1)).await;
+                                                        }
+                                                    }
+                                                }
+                                            });
+                                            // CRITICAL: keep the current-thread runtime
+                                            // alive. Without this, block_on() returns,
+                                            // the Runtime is dropped, and ALL spawned
+                                            // background tasks (health monitor, drain
+                                            // enforcer, zombie watchdog) are silently
+                                            // cancelled — causing the draining-writer
+                                            // leak that brought us here.
+                                            std::future::pending::<()>().await;
+                                            unreachable!();
+                                    }
+                                    Err(e) => {
+                                        startup_tracker_bg.set_me_last_error(Some(e.to_string())).await;
+                                        if init_attempt >= me_init_warn_after_attempts {
+                                            warn!(
+                                                error = %e,
+                                                attempt = init_attempt,
+                                                retry_limit = %retry_limit,
+                                                retry_in_secs = 2,
+                                                "ME pool is not ready yet; retrying background initialization"
+                                            );
+                                        } else {
+                                            info!(
+                                                error = %e,
+                                                attempt = init_attempt,
+                                                retry_limit = %retry_limit,
+                                                retry_in_secs = 2,
+                                                "ME pool startup warmup: retrying background initialization"
+                                            );
+                                        }
+                                        pool_bg.reset_stun_state();
+                                        tokio::time::sleep(Duration::from_secs(2)).await;
+                                    }
+                                }
+                            }
+                        });
+                    });
+                    startup_tracker
+                        .set_me_status(StartupMeStatus::Initializing, "background_init")
+                        .await;
+                    info!(
+                        startup_grace_secs = 80,
+                        "ME pool initialization continues in background; startup continues with conditional Direct fallback"
+                    );
+                    Some(pool)
+                } else {
+                    let mut init_attempt: u32 = 0;
+                    loop {
+                        init_attempt = init_attempt.saturating_add(1);
+                        startup_tracker.set_me_init_attempt(init_attempt).await;
+                        match pool.init(pool_size, &rng).await {
+                            Ok(()) => {
+                                startup_tracker.set_me_last_error(None).await;
+                                startup_tracker
+                                    .complete_component(
+                                        COMPONENT_ME_POOL_INIT_STAGE1,
+                                        Some("ME pool initialized".to_string()),
+                                    )
+                                    .await;
+                                startup_tracker
+                                    .set_me_status(StartupMeStatus::Ready, "ready")
+                                    .await;
+                                info!(
+                                    attempt = init_attempt,
+                                    "Middle-End pool initialized successfully"
+                                );
+
+                                // ── Supervised background tasks ──────────────────
+                                let pool_clone = pool.clone();
+                                let rng_clone = rng.clone();
+                                let min_conns = pool_size;
+                                tokio::spawn(async move {
+                                    loop {
+                                        let p = pool_clone.clone();
+                                        let r = rng_clone.clone();
+                                        let res = tokio::spawn(async move {
+                                            crate::transport::middle_proxy::me_health_monitor(
+                                                p, r, min_conns,
+                                            )
+                                            .await;
+                                        })
+                                        .await;
+                                        match res {
+                                            Ok(()) => warn!(
+                                                "me_health_monitor exited unexpectedly, restarting"
+                                            ),
+                                            Err(e) => {
+                                                error!(error = %e, "me_health_monitor panicked, restarting in 1s");
+                                                tokio::time::sleep(Duration::from_secs(1)).await;
+                                            }
+                                        }
+                                    }
+                                });
+                                let pool_drain_enforcer = pool.clone();
+                                tokio::spawn(async move {
+                                    loop {
+                                        let p = pool_drain_enforcer.clone();
+                                        let res = tokio::spawn(async move {
+                                                crate::transport::middle_proxy::me_drain_timeout_enforcer(p).await;
+                                            })
+                                            .await;
+                                        match res {
+                                            Ok(()) => warn!(
+                                                "me_drain_timeout_enforcer exited unexpectedly, restarting"
+                                            ),
+                                            Err(e) => {
+                                                error!(error = %e, "me_drain_timeout_enforcer panicked, restarting in 1s");
+                                                tokio::time::sleep(Duration::from_secs(1)).await;
+                                            }
+                                        }
+                                    }
+                                });
+                                let pool_watchdog = pool.clone();
+                                tokio::spawn(async move {
+                                    loop {
+                                        let p = pool_watchdog.clone();
+                                        let res = tokio::spawn(async move {
+                                                crate::transport::middle_proxy::me_zombie_writer_watchdog(p).await;
+                                            })
+                                            .await;
+                                        match res {
+                                            Ok(()) => warn!(
+                                                "me_zombie_writer_watchdog exited unexpectedly, restarting"
+                                            ),
+                                            Err(e) => {
+                                                error!(error = %e, "me_zombie_writer_watchdog panicked, restarting in 1s");
+                                                tokio::time::sleep(Duration::from_secs(1)).await;
+                                            }
+                                        }
+                                    }
+                                });
+
+                                break Some(pool);
+                            }
+                            Err(e) => {
+                                startup_tracker.set_me_last_error(Some(e.to_string())).await;
+                                let retries_limited = me_init_retry_attempts > 0;
+                                if retries_limited && init_attempt >= me_init_retry_attempts {
+                                    startup_tracker
+                                        .fail_component(
+                                            COMPONENT_ME_POOL_INIT_STAGE1,
+                                            Some("ME init retry budget exhausted".to_string()),
+                                        )
+                                        .await;
+                                    startup_tracker
+                                        .set_me_status(StartupMeStatus::Failed, "failed")
+                                        .await;
+                                    error!(
+                                        error = %e,
+                                        attempt = init_attempt,
+                                        retry_limit = me_init_retry_attempts,
+                                        "ME pool init retries exhausted; startup cannot continue in middle-proxy mode"
+                                    );
+                                    break None;
+                                }
+
+                                let retry_limit = if me_init_retry_attempts == 0 {
+                                    String::from("unlimited")
+                                } else {
+                                    me_init_retry_attempts.to_string()
+                                };
+                                if init_attempt >= me_init_warn_after_attempts {
+                                    warn!(
+                                        error = %e,
+                                        attempt = init_attempt,
+                                        retry_limit = retry_limit,
+                                        me2dc_fallback = me2dc_fallback,
+                                        retry_in_secs = 2,
+                                        "ME pool is not ready yet; retrying startup initialization"
+                                    );
+                                } else {
+                                    info!(
+                                        error = %e,
+                                        attempt = init_attempt,
+                                        retry_limit = retry_limit,
+                                        me2dc_fallback = me2dc_fallback,
+                                        retry_in_secs = 2,
+                                        "ME pool startup warmup: retrying initialization"
+                                    );
+                                }
+                                pool.reset_stun_state();
+                                tokio::time::sleep(Duration::from_secs(2)).await;
+                            }
+                        }
+                    }
+                }
+            } else {
+                startup_tracker
+                    .skip_component(
+                        COMPONENT_ME_POOL_CONSTRUCT,
+                        Some("ME configs are incomplete".to_string()),
+                    )
+                    .await;
+                startup_tracker
+                    .fail_component(
+                        COMPONENT_ME_POOL_INIT_STAGE1,
+                        Some("ME configs are incomplete".to_string()),
+                    )
+                    .await;
+                startup_tracker
+                    .set_me_status(StartupMeStatus::Failed, "failed")
+                    .await;
+                None
+            }
+        }
+        None => {
+            startup_tracker
+                .fail_component(
+                    COMPONENT_ME_SECRET_FETCH,
+                    Some("proxy-secret unavailable".to_string()),
+                )
+                .await;
+            startup_tracker
+                .skip_component(
+                    COMPONENT_ME_PROXY_CONFIG_V4,
+                    Some("proxy-secret unavailable".to_string()),
+                )
+                .await;
+            startup_tracker
+                .skip_component(
+                    COMPONENT_ME_PROXY_CONFIG_V6,
+                    Some("proxy-secret unavailable".to_string()),
+                )
+                .await;
+            startup_tracker
+                .skip_component(
+                    COMPONENT_ME_POOL_CONSTRUCT,
+                    Some("proxy-secret unavailable".to_string()),
+                )
+                .await;
+            startup_tracker
+                .fail_component(
+                    COMPONENT_ME_POOL_INIT_STAGE1,
+                    Some("proxy-secret unavailable".to_string()),
+                )
+                .await;
+            startup_tracker
+                .set_me_status(StartupMeStatus::Failed, "failed")
+                .await;
+            None
+        }
+    }
+}

src/maestro/mod.rs

@@ -0,0 +1,821 @@
+//! telemt — Telegram MTProto Proxy
+
+#![allow(unused_assignments)]
+
+// Runtime orchestration modules.
+// - helpers: CLI and shared startup/runtime helper routines.
+// - tls_bootstrap: TLS front cache bootstrap and refresh tasks.
+// - me_startup: Middle-End secret/config fetch and pool initialization.
+// - connectivity: startup ME/DC connectivity diagnostics.
+// - runtime_tasks: hot-reload and background task orchestration.
+// - admission: conditional-cast gate and route mode switching.
+// - listeners: TCP/Unix listener bind and accept-loop orchestration.
+// - shutdown: graceful shutdown sequence and uptime logging.
+mod admission;
+mod connectivity;
+mod helpers;
+mod listeners;
+mod me_startup;
+mod runtime_tasks;
+mod shutdown;
+mod tls_bootstrap;
+
+use std::net::{IpAddr, SocketAddr};
+use std::sync::Arc;
+use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH};
+use tokio::sync::{RwLock, Semaphore, watch};
+use tracing::{error, info, warn};
+use tracing_subscriber::{EnvFilter, fmt, prelude::*, reload};
+
+use crate::api;
+use crate::config::{LogLevel, ProxyConfig};
+use crate::conntrack_control;
+use crate::crypto::SecureRandom;
+use crate::ip_tracker::UserIpTracker;
+use crate::network::probe::{decide_network_capabilities, log_probe_result, run_probe};
+use crate::proxy::route_mode::{RelayRouteMode, RouteRuntimeController};
+use crate::proxy::shared_state::ProxySharedState;
+use crate::startup::{
+    COMPONENT_API_BOOTSTRAP, COMPONENT_CONFIG_LOAD, COMPONENT_ME_POOL_CONSTRUCT,
+    COMPONENT_ME_POOL_INIT_STAGE1, COMPONENT_ME_PROXY_CONFIG_V4, COMPONENT_ME_PROXY_CONFIG_V6,
+    COMPONENT_ME_SECRET_FETCH, COMPONENT_NETWORK_PROBE, COMPONENT_TRACING_INIT, StartupMeStatus,
+    StartupTracker,
+};
+use crate::stats::beobachten::BeobachtenStore;
+use crate::stats::telemetry::TelemetryPolicy;
+use crate::stats::{ReplayChecker, Stats};
+use crate::stream::BufferPool;
+use crate::transport::UpstreamManager;
+use crate::transport::middle_proxy::MePool;
+use helpers::{parse_cli, resolve_runtime_config_path};
+
+#[cfg(unix)]
+use crate::daemon::{DaemonOptions, PidFile, drop_privileges};
+
+/// Runs the full telemt runtime startup pipeline and blocks until shutdown.
+///
+/// On Unix, daemon options should be handled before calling this function
+/// (daemonization must happen before tokio runtime starts).
+#[cfg(unix)]
+pub async fn run_with_daemon(
+    daemon_opts: DaemonOptions,
+) -> std::result::Result<(), Box<dyn std::error::Error>> {
+    run_inner(daemon_opts).await
+}
+
+/// Runs the full telemt runtime startup pipeline and blocks until shutdown.
+///
+/// This is the main entry point for non-daemon mode or when called as a library.
+#[allow(dead_code)]
+pub async fn run() -> std::result::Result<(), Box<dyn std::error::Error>> {
+    #[cfg(unix)]
+    {
+        // Parse CLI to get daemon options even in simple run() path
+        let args: Vec<String> = std::env::args().skip(1).collect();
+        let daemon_opts = crate::cli::parse_daemon_args(&args);
+        run_inner(daemon_opts).await
+    }
+    #[cfg(not(unix))]
+    {
+        run_inner().await
+    }
+}
+
+#[cfg(unix)]
+async fn run_inner(
+    daemon_opts: DaemonOptions,
+) -> std::result::Result<(), Box<dyn std::error::Error>> {
+    // Acquire PID file if daemonizing or if explicitly requested
+    // Keep it alive until shutdown (underscore prefix = intentionally kept for RAII cleanup)
+    let _pid_file = if daemon_opts.daemonize || daemon_opts.pid_file.is_some() {
+        let mut pf = PidFile::new(daemon_opts.pid_file_path());
+        if let Err(e) = pf.acquire() {
+            eprintln!("[telemt] {}", e);
+            std::process::exit(1);
+        }
+        Some(pf)
+    } else {
+        None
+    };
+
+    let process_started_at = Instant::now();
+    let process_started_at_epoch_secs = SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .unwrap_or_default()
+        .as_secs();
+    let startup_tracker = Arc::new(StartupTracker::new(process_started_at_epoch_secs));
+    startup_tracker
+        .start_component(
+            COMPONENT_CONFIG_LOAD,
+            Some("load and validate config".to_string()),
+        )
+        .await;
+    let cli_args = parse_cli();
+    let config_path_cli = cli_args.config_path;
+    let config_path_explicit = cli_args.config_path_explicit;
+    let data_path = cli_args.data_path;
+    let cli_silent = cli_args.silent;
+    let cli_log_level = cli_args.log_level;
+    let log_destination = cli_args.log_destination;
+    let startup_cwd = match std::env::current_dir() {
+        Ok(cwd) => cwd,
+        Err(e) => {
+            eprintln!("[telemt] Can't read current_dir: {}", e);
+            std::process::exit(1);
+        }
+    };
+    let mut config_path =
+        resolve_runtime_config_path(&config_path_cli, &startup_cwd, config_path_explicit);
+
+    let mut config = match ProxyConfig::load(&config_path) {
+        Ok(c) => c,
+        Err(e) => {
+            if config_path.exists() {
+                eprintln!("[telemt] Error: {}", e);
+                std::process::exit(1);
+            } else {
+                let default = ProxyConfig::default();
+
+                let serialized =
+                    match toml::to_string_pretty(&default).or_else(|_| toml::to_string(&default)) {
+                        Ok(value) => Some(value),
+                        Err(serialize_error) => {
+                            eprintln!(
+                                "[telemt] Warning: failed to serialize default config: {}",
+                                serialize_error
+                            );
+                            None
+                        }
+                    };
+
+                if config_path_explicit {
+                    if let Some(serialized) = serialized.as_ref() {
+                        if let Err(write_error) = std::fs::write(&config_path, serialized) {
+                            eprintln!(
+                                "[telemt] Error: failed to create explicit config at {}: {}",
+                                config_path.display(),
+                                write_error
+                            );
+                            std::process::exit(1);
+                        }
+                        eprintln!(
+                            "[telemt] Created default config at {}",
+                            config_path.display()
+                        );
+                    } else {
+                        eprintln!(
+                            "[telemt] Warning: running with in-memory default config without writing to disk"
+                        );
+                    }
+                } else {
+                    let system_dir = std::path::Path::new("/etc/telemt");
+                    let system_config_path = system_dir.join("telemt.toml");
+                    let startup_config_path = startup_cwd.join("config.toml");
+                    let mut persisted = false;
+
+                    if let Some(serialized) = serialized.as_ref() {
+                        match std::fs::create_dir_all(system_dir) {
+                            Ok(()) => match std::fs::write(&system_config_path, serialized) {
+                                Ok(()) => {
+                                    config_path = system_config_path;
+                                    eprintln!(
+                                        "[telemt] Created default config at {}",
+                                        config_path.display()
+                                    );
+                                    persisted = true;
+                                }
+                                Err(write_error) => {
+                                    eprintln!(
+                                        "[telemt] Warning: failed to write default config at {}: {}",
+                                        system_config_path.display(),
+                                        write_error
+                                    );
+                                }
+                            },
+                            Err(create_error) => {
+                                eprintln!(
+                                    "[telemt] Warning: failed to create {}: {}",
+                                    system_dir.display(),
+                                    create_error
+                                );
+                            }
+                        }
+
+                        if !persisted {
+                            match std::fs::write(&startup_config_path, serialized) {
+                                Ok(()) => {
+                                    config_path = startup_config_path;
+                                    eprintln!(
+                                        "[telemt] Created default config at {}",
+                                        config_path.display()
+                                    );
+                                    persisted = true;
+                                }
+                                Err(write_error) => {
+                                    eprintln!(
+                                        "[telemt] Warning: failed to write default config at {}: {}",
+                                        startup_config_path.display(),
+                                        write_error
+                                    );
+                                }
+                            }
+                        }
+                    }
+
+                    if !persisted {
+                        eprintln!(
+                            "[telemt] Warning: running with in-memory default config without writing to disk"
+                        );
+                    }
+                }
+                default
+            }
+        }
+    };
+
+    if let Err(e) = config.validate() {
+        eprintln!("[telemt] Invalid config: {}", e);
+        std::process::exit(1);
+    }
+
+    if let Some(p) = data_path {
+        config.general.data_path = Some(p);
+    }
+
+    if let Some(ref data_path) = config.general.data_path {
+        if !data_path.is_absolute() {
+            eprintln!(
+                "[telemt] data_path must be absolute: {}",
+                data_path.display()
+            );
+            std::process::exit(1);
+        }
+
+        if data_path.exists() {
+            if !data_path.is_dir() {
+                eprintln!(
+                    "[telemt] data_path exists but is not a directory: {}",
+                    data_path.display()
+                );
+                std::process::exit(1);
+            }
+        } else if let Err(e) = std::fs::create_dir_all(data_path) {
+            eprintln!(
+                "[telemt] Can't create data_path {}: {}",
+                data_path.display(),
+                e
+            );
+            std::process::exit(1);
+        }
+
+        if let Err(e) = std::env::set_current_dir(data_path) {
+            eprintln!(
+                "[telemt] Can't use data_path {}: {}",
+                data_path.display(),
+                e
+            );
+            std::process::exit(1);
+        }
+    }
+
+    if let Err(e) = crate::network::dns_overrides::install_entries(&config.network.dns_overrides) {
+        eprintln!("[telemt] Invalid network.dns_overrides: {}", e);
+        std::process::exit(1);
+    }
+    startup_tracker
+        .complete_component(COMPONENT_CONFIG_LOAD, Some("config is ready".to_string()))
+        .await;
+
+    let has_rust_log = std::env::var("RUST_LOG").is_ok();
+    let effective_log_level = if cli_silent {
+        LogLevel::Silent
+    } else if let Some(ref s) = cli_log_level {
+        LogLevel::from_str_loose(s)
+    } else {
+        config.general.log_level.clone()
+    };
+
+    let (filter_layer, filter_handle) = reload::Layer::new(EnvFilter::new("info"));
+    startup_tracker
+        .start_component(
+            COMPONENT_TRACING_INIT,
+            Some("initialize tracing subscriber".to_string()),
+        )
+        .await;
+
+    // Initialize logging based on destination
+    let _logging_guard: Option<crate::logging::LoggingGuard>;
+    match log_destination {
+        crate::logging::LogDestination::Stderr => {
+            // Default: log to stderr (works with systemd journald)
+            let fmt_layer = if config.general.disable_colors {
+                fmt::Layer::default().with_ansi(false)
+            } else {
+                fmt::Layer::default().with_ansi(true)
+            };
+            tracing_subscriber::registry()
+                .with(filter_layer)
+                .with(fmt_layer)
+                .init();
+            _logging_guard = None;
+        }
+        #[cfg(unix)]
+        crate::logging::LogDestination::Syslog => {
+            // Syslog: for OpenRC/FreeBSD
+            let logging_opts = crate::logging::LoggingOptions {
+                destination: log_destination,
+                disable_colors: true,
+            };
+            let (_, guard) = crate::logging::init_logging(&logging_opts, "info");
+            _logging_guard = Some(guard);
+        }
+        crate::logging::LogDestination::File { .. } => {
+            // File logging with optional rotation
+            let logging_opts = crate::logging::LoggingOptions {
+                destination: log_destination,
+                disable_colors: true,
+            };
+            let (_, guard) = crate::logging::init_logging(&logging_opts, "info");
+            _logging_guard = Some(guard);
+        }
+    }
+
+    startup_tracker
+        .complete_component(
+            COMPONENT_TRACING_INIT,
+            Some("tracing initialized".to_string()),
+        )
+        .await;
+
+    info!("Telemt MTProxy v{}", env!("CARGO_PKG_VERSION"));
+    info!("Log level: {}", effective_log_level);
+    if config.general.disable_colors {
+        info!("Colors: disabled");
+    }
+    info!(
+        "Modes: classic={} secure={} tls={}",
+        config.general.modes.classic, config.general.modes.secure, config.general.modes.tls
+    );
+    if config.general.modes.classic {
+        warn!("Classic mode is vulnerable to DPI detection; enable only for legacy clients");
+    }
+    info!("TLS domain: {}", config.censorship.tls_domain);
+    if let Some(ref sock) = config.censorship.mask_unix_sock {
+        info!("Mask: {} -> unix:{}", config.censorship.mask, sock);
+        if !std::path::Path::new(sock).exists() {
+            warn!(
+                "Unix socket '{}' does not exist yet. Masking will fail until it appears.",
+                sock
+            );
+        }
+    } else {
+        info!(
+            "Mask: {} -> {}:{}",
+            config.censorship.mask,
+            config
+                .censorship
+                .mask_host
+                .as_deref()
+                .unwrap_or(&config.censorship.tls_domain),
+            config.censorship.mask_port
+        );
+    }
+
+    if config.censorship.tls_domain == "www.google.com" {
+        warn!("Using default tls_domain. Consider setting a custom domain.");
+    }
+
+    let stats = Arc::new(Stats::new());
+    stats.apply_telemetry_policy(TelemetryPolicy::from_config(&config.general.telemetry));
+
+    let upstream_manager = Arc::new(UpstreamManager::new(
+        config.upstreams.clone(),
+        config.general.upstream_connect_retry_attempts,
+        config.general.upstream_connect_retry_backoff_ms,
+        config.general.upstream_connect_budget_ms,
+        config.general.tg_connect,
+        config.general.upstream_unhealthy_fail_threshold,
+        config.general.upstream_connect_failfast_hard_errors,
+        stats.clone(),
+    ));
+    let ip_tracker = Arc::new(UserIpTracker::new());
+    ip_tracker
+        .load_limits(
+            config.access.user_max_unique_ips_global_each,
+            &config.access.user_max_unique_ips,
+        )
+        .await;
+    ip_tracker
+        .set_limit_policy(
+            config.access.user_max_unique_ips_mode,
+            config.access.user_max_unique_ips_window_secs,
+        )
+        .await;
+    if config.access.user_max_unique_ips_global_each > 0
+        || !config.access.user_max_unique_ips.is_empty()
+    {
+        info!(
+            global_each_limit = config.access.user_max_unique_ips_global_each,
+            explicit_user_limits = config.access.user_max_unique_ips.len(),
+            "User unique IP limits configured"
+        );
+    }
+    if !config.network.dns_overrides.is_empty() {
+        info!(
+            "Runtime DNS overrides configured: {} entries",
+            config.network.dns_overrides.len()
+        );
+    }
+
+    let (api_config_tx, api_config_rx) = watch::channel(Arc::new(config.clone()));
+    let (detected_ips_tx, detected_ips_rx) = watch::channel((None::<IpAddr>, None::<IpAddr>));
+    let initial_admission_open = !config.general.use_middle_proxy;
+    let (admission_tx, admission_rx) = watch::channel(initial_admission_open);
+    let initial_route_mode = if config.general.use_middle_proxy {
+        RelayRouteMode::Middle
+    } else {
+        RelayRouteMode::Direct
+    };
+    let route_runtime = Arc::new(RouteRuntimeController::new(initial_route_mode));
+    let api_me_pool = Arc::new(RwLock::new(None::<Arc<MePool>>));
+    startup_tracker
+        .start_component(
+            COMPONENT_API_BOOTSTRAP,
+            Some("spawn API listener task".to_string()),
+        )
+        .await;
+
+    if config.server.api.enabled {
+        let listen = match config.server.api.listen.parse::<SocketAddr>() {
+            Ok(listen) => listen,
+            Err(error) => {
+                warn!(
+                    error = %error,
+                    listen = %config.server.api.listen,
+                    "Invalid server.api.listen; API is disabled"
+                );
+                SocketAddr::from(([127, 0, 0, 1], 0))
+            }
+        };
+        if listen.port() != 0 {
+            let stats_api = stats.clone();
+            let ip_tracker_api = ip_tracker.clone();
+            let me_pool_api = api_me_pool.clone();
+            let upstream_manager_api = upstream_manager.clone();
+            let route_runtime_api = route_runtime.clone();
+            let config_rx_api = api_config_rx.clone();
+            let admission_rx_api = admission_rx.clone();
+            let config_path_api = config_path.clone();
+            let startup_tracker_api = startup_tracker.clone();
+            let detected_ips_rx_api = detected_ips_rx.clone();
+            tokio::spawn(async move {
+                api::serve(
+                    listen,
+                    stats_api,
+                    ip_tracker_api,
+                    me_pool_api,
+                    route_runtime_api,
+                    upstream_manager_api,
+                    config_rx_api,
+                    admission_rx_api,
+                    config_path_api,
+                    detected_ips_rx_api,
+                    process_started_at_epoch_secs,
+                    startup_tracker_api,
+                )
+                .await;
+            });
+            startup_tracker
+                .complete_component(
+                    COMPONENT_API_BOOTSTRAP,
+                    Some(format!("api task spawned on {}", listen)),
+                )
+                .await;
+        } else {
+            startup_tracker
+                .skip_component(
+                    COMPONENT_API_BOOTSTRAP,
+                    Some("server.api.listen has zero port".to_string()),
+                )
+                .await;
+        }
+    } else {
+        startup_tracker
+            .skip_component(
+                COMPONENT_API_BOOTSTRAP,
+                Some("server.api.enabled is false".to_string()),
+            )
+            .await;
+    }
+
+    let mut tls_domains = Vec::with_capacity(1 + config.censorship.tls_domains.len());
+    tls_domains.push(config.censorship.tls_domain.clone());
+    for d in &config.censorship.tls_domains {
+        if !tls_domains.contains(d) {
+            tls_domains.push(d.clone());
+        }
+    }
+
+    let tls_cache = tls_bootstrap::bootstrap_tls_front(
+        &config,
+        &tls_domains,
+        upstream_manager.clone(),
+        &startup_tracker,
+    )
+    .await;
+
+    startup_tracker
+        .start_component(
+            COMPONENT_NETWORK_PROBE,
+            Some("probe network capabilities".to_string()),
+        )
+        .await;
+    let probe = run_probe(
+        &config.network,
+        &config.upstreams,
+        config.general.middle_proxy_nat_probe,
+        config.general.stun_nat_probe_concurrency,
+    )
+    .await?;
+    detected_ips_tx.send_replace((
+        probe.detected_ipv4.map(IpAddr::V4),
+        probe.detected_ipv6.map(IpAddr::V6),
+    ));
+    let decision =
+        decide_network_capabilities(&config.network, &probe, config.general.middle_proxy_nat_ip);
+    log_probe_result(&probe, &decision);
+    startup_tracker
+        .complete_component(
+            COMPONENT_NETWORK_PROBE,
+            Some("network capabilities determined".to_string()),
+        )
+        .await;
+
+    let prefer_ipv6 = decision.prefer_ipv6();
+    let mut use_middle_proxy = config.general.use_middle_proxy;
+    let beobachten = Arc::new(BeobachtenStore::new());
+    let rng = Arc::new(SecureRandom::new());
+
+    // Connection concurrency limit (0 = unlimited)
+    let max_connections_limit = if config.server.max_connections == 0 {
+        Semaphore::MAX_PERMITS
+    } else {
+        config.server.max_connections as usize
+    };
+    let max_connections = Arc::new(Semaphore::new(max_connections_limit));
+
+    let me2dc_fallback = config.general.me2dc_fallback;
+    let me_init_retry_attempts = config.general.me_init_retry_attempts;
+    if use_middle_proxy && !decision.ipv4_me && !decision.ipv6_me {
+        if me2dc_fallback {
+            warn!("No usable IP family for Middle Proxy detected; falling back to direct DC");
+            use_middle_proxy = false;
+        } else {
+            warn!(
+                "No usable IP family for Middle Proxy detected; me2dc_fallback=false, ME init retries stay active"
+            );
+        }
+    }
+
+    if use_middle_proxy {
+        startup_tracker
+            .set_me_status(StartupMeStatus::Initializing, COMPONENT_ME_SECRET_FETCH)
+            .await;
+        startup_tracker
+            .start_component(
+                COMPONENT_ME_SECRET_FETCH,
+                Some("fetch proxy-secret from source/cache".to_string()),
+            )
+            .await;
+        startup_tracker
+            .set_me_retry_limit(if !me2dc_fallback || me_init_retry_attempts == 0 {
+                "unlimited".to_string()
+            } else {
+                me_init_retry_attempts.to_string()
+            })
+            .await;
+    } else {
+        startup_tracker
+            .set_me_status(StartupMeStatus::Skipped, "skipped")
+            .await;
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_SECRET_FETCH,
+                Some("middle proxy mode disabled".to_string()),
+            )
+            .await;
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_PROXY_CONFIG_V4,
+                Some("middle proxy mode disabled".to_string()),
+            )
+            .await;
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_PROXY_CONFIG_V6,
+                Some("middle proxy mode disabled".to_string()),
+            )
+            .await;
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_POOL_CONSTRUCT,
+                Some("middle proxy mode disabled".to_string()),
+            )
+            .await;
+        startup_tracker
+            .skip_component(
+                COMPONENT_ME_POOL_INIT_STAGE1,
+                Some("middle proxy mode disabled".to_string()),
+            )
+            .await;
+    }
+
+    let me_pool: Option<Arc<MePool>> = me_startup::initialize_me_pool(
+        use_middle_proxy,
+        &config,
+        &decision,
+        &probe,
+        &startup_tracker,
+        upstream_manager.clone(),
+        rng.clone(),
+        stats.clone(),
+        api_me_pool.clone(),
+    )
+    .await;
+
+    // If ME failed to initialize, force direct-only mode.
+    if me_pool.is_some() {
+        startup_tracker.set_transport_mode("middle_proxy").await;
+        startup_tracker.set_degraded(false).await;
+        info!("Transport: Middle-End Proxy - all DC-over-RPC");
+    } else {
+        let _ = use_middle_proxy;
+        use_middle_proxy = false;
+        // Make runtime config reflect direct-only mode for handlers.
+        config.general.use_middle_proxy = false;
+        startup_tracker.set_transport_mode("direct").await;
+        startup_tracker.set_degraded(true).await;
+        if me2dc_fallback {
+            startup_tracker
+                .set_me_status(StartupMeStatus::Failed, "fallback_to_direct")
+                .await;
+        } else {
+            startup_tracker
+                .set_me_status(StartupMeStatus::Skipped, "skipped")
+                .await;
+        }
+        info!("Transport: Direct DC - TCP - standard DC-over-TCP");
+    }
+
+    // Freeze config after possible fallback decision
+    let config = Arc::new(config);
+
+    let replay_checker = Arc::new(ReplayChecker::new(
+        config.access.replay_check_len,
+        Duration::from_secs(config.access.replay_window_secs),
+    ));
+
+    let buffer_pool = Arc::new(BufferPool::with_config(64 * 1024, 4096));
+
+    connectivity::run_startup_connectivity(
+        &config,
+        &me_pool,
+        rng.clone(),
+        &startup_tracker,
+        upstream_manager.clone(),
+        prefer_ipv6,
+        &decision,
+        process_started_at,
+        api_me_pool.clone(),
+    )
+    .await;
+
+    let runtime_watches = runtime_tasks::spawn_runtime_tasks(
+        &config,
+        &config_path,
+        &probe,
+        prefer_ipv6,
+        decision.ipv4_dc,
+        decision.ipv6_dc,
+        &startup_tracker,
+        stats.clone(),
+        upstream_manager.clone(),
+        replay_checker.clone(),
+        me_pool.clone(),
+        rng.clone(),
+        ip_tracker.clone(),
+        beobachten.clone(),
+        api_config_tx.clone(),
+        me_pool.clone(),
+    )
+    .await;
+    let config_rx = runtime_watches.config_rx;
+    let log_level_rx = runtime_watches.log_level_rx;
+    let detected_ip_v4 = runtime_watches.detected_ip_v4;
+    let detected_ip_v6 = runtime_watches.detected_ip_v6;
+
+    admission::configure_admission_gate(
+        &config,
+        me_pool.clone(),
+        route_runtime.clone(),
+        &admission_tx,
+        config_rx.clone(),
+    )
+    .await;
+    let _admission_tx_hold = admission_tx;
+    let shared_state = ProxySharedState::new();
+    conntrack_control::spawn_conntrack_controller(
+        config_rx.clone(),
+        stats.clone(),
+        shared_state.clone(),
+    );
+
+    let bound = listeners::bind_listeners(
+        &config,
+        decision.ipv4_dc,
+        decision.ipv6_dc,
+        detected_ip_v4,
+        detected_ip_v6,
+        &startup_tracker,
+        config_rx.clone(),
+        admission_rx.clone(),
+        stats.clone(),
+        upstream_manager.clone(),
+        replay_checker.clone(),
+        buffer_pool.clone(),
+        rng.clone(),
+        me_pool.clone(),
+        route_runtime.clone(),
+        tls_cache.clone(),
+        ip_tracker.clone(),
+        beobachten.clone(),
+        shared_state.clone(),
+        max_connections.clone(),
+    )
+    .await?;
+    let listeners = bound.listeners;
+    let has_unix_listener = bound.has_unix_listener;
+
+    if listeners.is_empty() && !has_unix_listener {
+        error!("No listeners. Exiting.");
+        std::process::exit(1);
+    }
+
+    // Drop privileges after binding sockets (which may require root for port < 1024)
+    if daemon_opts.user.is_some() || daemon_opts.group.is_some() {
+        if let Err(e) = drop_privileges(
+            daemon_opts.user.as_deref(),
+            daemon_opts.group.as_deref(),
+            _pid_file.as_ref(),
+        ) {
+            error!(error = %e, "Failed to drop privileges");
+            std::process::exit(1);
+        }
+    }
+
+    runtime_tasks::apply_runtime_log_filter(
+        has_rust_log,
+        &effective_log_level,
+        filter_handle,
+        log_level_rx,
+    )
+    .await;
+
+    runtime_tasks::spawn_metrics_if_configured(
+        &config,
+        &startup_tracker,
+        stats.clone(),
+        beobachten.clone(),
+        shared_state.clone(),
+        ip_tracker.clone(),
+        config_rx.clone(),
+    )
+    .await;
+
+    runtime_tasks::mark_runtime_ready(&startup_tracker).await;
+
+    // Spawn signal handlers for SIGUSR1/SIGUSR2 (non-shutdown signals)
+    shutdown::spawn_signal_handlers(stats.clone(), process_started_at);
+
+    listeners::spawn_tcp_accept_loops(
+        listeners,
+        config_rx.clone(),
+        admission_rx.clone(),
+        stats.clone(),
+        upstream_manager.clone(),
+        replay_checker.clone(),
+        buffer_pool.clone(),
+        rng.clone(),
+        me_pool.clone(),
+        route_runtime.clone(),
+        tls_cache.clone(),
+        ip_tracker.clone(),
+        beobachten.clone(),
+        shared_state,
+        max_connections.clone(),
+    );
+
+    shutdown::wait_for_shutdown(process_started_at, me_pool, stats).await;
+
+    Ok(())
+}